Application of the NSE score (Neurology-Stability-Epidural compression assessment) to establish the need for surgery in spinal metastases of elderly patients: a multicenter investigation.

PURPOSE: This retropective multicentric study aims to investigate the clinical applicability of the NSE score in the elderly, to verify the role of this tool as an easy help for decision making also for this class of patients. METHODS: All elderly patients (> 65 years) suffering from spinal metastases undergoing surgical or non-surgical treatment at the authors' Institutions between 2015 and 2022 were recruited. An agreement group (AG) and non-agreement group (NAG) were identified accordingly to the agreement between the NSE score indication and the performed treatment. Neurological status and axial pain were evaluated for both groups at follow-up (3 and 6 months). The same analysis was conducted specifically grouping patients older than 75 years. RESULTS: A strong association with improvement or preservation of clinical status (p < 0.001) at follow-up was obtained in AG. The association was not statistically significant in NAG at the 3-month follow-up (p 1.00 and 0.07 respectively) and at 6 months (p 0.293 and 0.09 respectively). The group of patients over 75 years old showed similar results in terms of statistical association between the agreement group and better outcomes. CONCLUSION: Far from the need or the aim to build dogmatic algorithms, the goal of preserving a proper performance status plays a key role in a modern oncological management: functional outcomes of the multicentric study group showed that the NSE score represents a reliable tool to establish the need for surgery also for elderly patients.

Clinical outcomes, MRI evaluation and predictive factors of indirect decompression with lateral transpsoas approach for lumbar interbody fusion: a multicenter experience.

Introduction: Evaluating the effects of indirect decompression obtained through lateral lumbar interbody fusion (LLIF) by clinical improvements and radiological parameters on MRI scans. Identifying predictors of better decompression and clinical outcome. Materials and methods: From 2016 to 2019, patients who underwent single- or double-level indirect decompression LLIF were consecutively reviewed. Radiological signs of indirect decompression were evaluated in preoperative and follow-up MRI studies and were subsequently correlated to clinical data, expressed as axial/radicular pain (VAS back/leg), index of disability (Oswestry Disability Index) and clinical severity of lumbar stenosis (Swiss Spinal Stenosis Questionnaire). Results: 72 patients were enrolled. The mean follow-up was 24 months. Differences in vertebral canal area (p < 0.001), height of the foramina (p < 0.001), thickness of the yellow ligament (p = 0.001) and anterior height of the interbody space (p = 0.02) were observed. Older age (p = 0.042), presence of spondylolisthesis (p = 0.042), presence of intra-articular facet effusion (p = 0.003) and posterior height of the implanted cage (p = 0.020) positively affected the increase of the canal area. Change in root canal area (p < 0.001), height of the implanted cage (p = 0.020) and younger age (p = 0.035) were predictive factors of root pain relief, while increased vertebral canal area (p = 0.020) and height of the interbody fusion cage (p = 0.023) positively affected the severity of clinical stenosis. Conclusions: LLIF indirect decompression showed both clinical and radiological improvements. Presence and degree of spondylolisthesis, presence of intra-articular facet effusion, age of the patient and height of the cage were predictive factors of major clinical improvements.

Relationship between lumbar lordosis, pelvic parameters, PI-LL mismatch and outcome after short fusion surgery for lumbar degenerative disease. Literature review, rational and presentation of public study protocol: RELApSE study (registry for evaluation of lumbar artrodesis sagittal alignEment).

Background: Vertebral arthrodesis for degenerative pathology of the lumbar spine still remains burdened by clinical problems with significant negative results. The introduction of the sagittal balance assessment with the evaluation of the meaning of pelvic parameters and spinopelvic (PI-LL) mismatch offered new evaluation criteria for this widespread pathology, but there is a lack of consistent evidence on long-term outcome. Methods: The authors performed an extensive systematic review of literature, with the aim to identify all potentially relevant studies about the role and usefulness of the restoration or the assessment of Sagittal balance in lumbar degenerative disease. They present the study protocol RELApSE (NCT05448092 ID) and discuss the rationale through a comprehensive literature review. Results: From the 237 papers on this topic, a total of 176 articles were selected in this review. The analysis of these literature data shows sparse and variable evidence. There are no observations or guidelines about the value of lordosis restoration or PI-LL mismatch. Most of the works in the literature are retrospective, monocentric, based on small populations, and often address the topic evaluation partially. Conclusions: The RELApSE study is based on the possibility of comparing a heterogeneous population by pathology and different surgical technical options on some homogeneous clinical and anatomic-radiological measures aiming to understanding the value that global lumbar and segmental lordosis, distribution of lordosis, pelvic tilt, and PI-LL mismatch may have on clinical outcome in lumbar degenerative pathology and on the occurrence of adjacent segment disease.

Three-Dimensional Patient-Matched Template Guides Are Able to Increase Mean Diameter and Length and to Improve Accuracy of Cortical Bone Trajectory Screws: A 5-Year International Experience.

OBJECTIVE: To analyze whether significant differences exist between free-hand three-dimensional (3D) planning-guided cortical bone trajectory (CBT) screw placement and 3D-printed template-guided CBT screw positioning in terms of accuracy, size of screws, and potential complications. METHODS: In this retrospective study, data of adult patients in whom CBT screws were placed for lumbar degenerative pathologies were extracted from a prospectively collected database and analyzed. Patients in whom screws were placed using free-hand 3D planning-guided technique were compared with patients in whom screws were positioned using customized 3D-printed templates. Size of the screws, accuracy, clinical outcomes, and complications were analyzed. RESULTS: The study evaluated 251 patients (1004 screws). The free-hand 3D planning-guided group included 158 patients (632 screws), and the 3D-printed template-guided group included 93 patients (372 screws). The 3D-printed template-guided group involved screws of larger size from L3 to S1. Differences between the 2 groups in terms of accuracy parameters reached statistical significance (P ≤ 0.05). CONCLUSIONS: With the use of 3D patient-matched template guides, mean diameter and length of CBT screws could be safely increased due to improved accuracy of screw placement. Based on previous evidence regarding CBT biomechanical properties, these advantages could allow increased fixation strength over traditional convergent pedicle screw trajectories. Further biomechanics studies are needed.

3D-printed guides for cervical pedicle screw placement in primary spine tumor: Case report and technical description.

Introduction: For spine surgeons, dealing with unstable cervical spine has been usually challenging, and this becomes more difficult when facing a primary craniovertebral junction tumor. Primary spine tumor surgery should always include column reconstruction in order to guarantee biomechanical stability of the spine, but surgeons should always be aware that instrumentations could create interferences with postoperative radiations. However, although carbon fiber instrumentations have started to be used in thoracolumbar oncology for few years, these options are still not available for cervical spine. In the reported case, the adopted strategy to obtain adequate column reconstruction was based on the idea of reducing the amount of titanium needed for posterior fixation and maximizing the distance between the radiation target and titanium rods. Case report and aim: We present the case of a 53-year-old woman harboring a craniovertebral junction chordoma. A short occipito-C3 construct was selected. Specifically, titanium cervical pedicle screws were placed by using a new technology consisting in patient-tailored and customized 3D-printed guides. The aim of this case report is to determine the feasibility and safety of 3D-printed guides for cervical pedicle screw (CPS) positioning, even in the case of cervical spine tumor. Conclusion: CPS could represent a good solution by providing strong biomechanical purchase and tailored 3D-printed guides could increase the safety and the accuracy of this challenging screw placement, even in oncological patients.

Virtual-Augmented Reality and Life-Like Neurosurgical Simulator for Training: First Evaluation of a Hands-On Experience for Residents.

Background: In the recent years, growing interest in simulation-based surgical education has led to various practical alternatives for medical training. More recently, courses based on virtual reality (VR) and three-dimensional (3D)-printed models are available. In this paper, a hybrid (virtual and physical) neurosurgical simulator has been validated, equipped with augmented reality (AR) capabilities that can be used repeatedly to increase familiarity and improve the technical skills in human brain anatomy and neurosurgical approaches. Methods: The neurosurgical simulator used in this study (UpSurgeOn Box, UpSurgeOn Srl, Assago, Milan) combines a virtual component and a physical component with an intermediate step to provide a hybrid solution. A first reported and evaluated practical experience on the anatomical 3D-printed model has been conducted with a total of 30 residents in neurosurgery. The residents had the possibility to choose a specific approach, focus on the correct patient positioning, and go over the chosen approach step-by-step, interacting with the model through AR application. Next, each practical surgical step on the 3D model was timed and qualitatively evaluated by 3 senior neurosurgeons. Quality and usability-grade surveys were filled out by participants. Results: More than 89% of the residents assessed that the application and the AR simulator were very helpful in improving the orientation skills during neurosurgical approaches. Indeed, 89.3% of participants found brain and skull anatomy highly realistic during their tasks. Moreover, workshop exercises were considered useful in increasing the competency and technical skills required in the operating room by 85.8 and 84.7% of residents, respectively. Data collected confirmed that the anatomical model and its application were intuitive, well-integrated, and easy to use. Conclusion: The hybrid AR and 3D-printed neurosurgical simulator could be a valid tool for neurosurgical training, capable of enhancing personal technical skills and competence. In addition, it could be easy to imagine how patient safety would increase and healthcare costs would be reduced, even if more studies are needed to investigate these aspects. The integration of simulators for training in neurosurgery as preparatory steps for the operating room should be recommended and further investigated given their huge potential.

Obesity and Spine Surgery: A Qualitative Review About Outcomes and Complications. Is It Time for New Perspectives on Future Researches?

STUDY DESIGN: Literature review. OBJECTIVES: An increasing number of obese patients requires operative care for degenerative spinal disorders. The aim of this review is to analyze the available evidence regarding the role of obesity on outcomes after spine surgery. Peri-operative complications and clinical results are evaluated for both cervical and lumbar surgery. Furthermore, the contribution of MIS techniques for lumbar surgery to play a role in reducing risks has been analyzed. METHODS: Only articles published in English in the last 10 years were reviewed. Inclusion criteria of the references were based on the scope of this review, according to PRISMA guidelines. Moreover, only paper analyzing obesity-related complications in spine surgery have been selected and thoroughly reviewed. Each article was classified according to its rating of evidence using the Sacket Grading System. RESULTS: A total number of 1636 articles were found, but only 130 of them were considered to be relevant after thorough evaluation and according to PRISMA checklist. The majority of the included papers were classified according to the Sacket Grading System as Level 2 (Retrospective Studies). CONCLUSION: Evidence suggest that obese patients could benefit from spine surgery and outcomes be satisfactory. A higher rate of peri-operative complications is reported among obese patients, especially in posterior approaches. The use of MIS techniques plays a key role in order to reduce surgical risks. Further studies should evaluate the role of multidisciplinary counseling between spine surgeons, nutritionists and bariatric surgeons, in order to plan proper weight loss before elective spine surgery.

Mesenchymal Stem Cell Treatment Perspectives in Peripheral Nerve Regeneration: Systematic Review.

Traumatic peripheral nerve lesions affect hundreds of thousands of patients every year; their consequences are life-altering and often devastating and cause alterations in movement and sensitivity. Spontaneous peripheral nerve recovery is often inadequate. In this context, nowadays, cell therapy represents one of the most innovative approaches in the field of nerve repair therapies. The purpose of this systematic review is to discuss the features of different types of mesenchymal stem cells (MSCs) relevant for peripheral nerve regeneration after nerve injury. The published literature was reviewed following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A combination of the keywords "nerve regeneration", "stem cells", "peripheral nerve injury", "rat", and "human" were used. Additionally, a "MeSH" research was performed in PubMed using the terms "stem cells" and "nerve regeneration". The characteristics of the most widely used MSCs, their paracrine potential, targeted stimulation, and differentiation potentials into Schwann-like and neuronal-like cells are described in this paper. Considering their ability to support and stimulate axonal growth, their remarkable paracrine activity, their presumed differentiation potential, their extremely low immunogenicity, and their high survival rate after transplantation, ADSCs appear to be the most suitable and promising MSCs for the recovery of peripheral nerve lesion. Clinical considerations are finally reported.

Cortical bone trajectory technique's outcomes and procedures for posterior lumbar fusion: A retrospective study.

Cortical Bone Trajectory screws allow a limited soft tissue dissection with mechanical properties comparable to traditional pedicle screws. However, clinical results are still reported on limited samples. The study aimed to evaluate perioperative and mid-term follow up outcomes, clinical results and complications in 238 consecutive patients underwent CBT fusion for degenerative lumbosacral disease. Pre- and intraoperative data, clinical outcomes and complications were collected. The patients were stratified in three groups. The original technique was performed in the first 43 cases without a preoperative CT scan planning. The second group includes the patients who underwent preoperative CT scan for entry point and screw trajectory planning (158 patients). Surgical procedures in the last group were performed with patient-matched 3D printed guide (37 patients). The accuracy in screws positioning was evaluated on postoperative CT scan. The mean follow-up was 32.3 months. Mean ODI and VAS index improved with statistical significance. Mean procedural time was 187, 142 and 124 min in the three subgroups. The total amount of recorded complications was 4.2% (16.3%, 3.8% and 0.0% respectively). Screws entirely within the cortex of the pedicle were 78.9%, 90.5% and 93.9% in the three groups. Fusion was obtained in 92.4% of cases. The CBT technique is a safe procedure, especially with an accurate preoperative CT scan-based planning. This seems more evident with the 3D template patient-matched guide. More studies are needed to directly compare traditional pedicle screws and CBT screws on long-term outcomes.

Carbon fiber reinforced vs titanium implants for fixation in spinal metastases: A comparative clinical study about safety and effectiveness of the new "carbon-strategy".

In spinal oncology traditional titanium implants could significantly impair evaluation of postoperative imaging because of artifacts, potentially affecting proper planning and execution of radiotherapy and adequate radiological follow-up to rule out progression of the disease. This is why carbon fiber reinforced (CFR)-PEEK implants have been developed for spinal fixation. The advantages of this system include fewer artifacts on imaging, potentially improving the execution and quality of radiotherapy, with also a reduced scattering effect to neighboring tissues. A comparative clinical and radiological study between new CFR-PEEK and standard titanium implants is described. Data recorded for each case included patient demographics, clinical, radiological and surgical data, intra- and postoperative complications, follow-up information. The goal of this study was to verify the safety and effectiveness of CFR-PEEK devices compared to standard titanium implants. A total number of 78 patients were reviewed. 36 patients underwent CFR-PEEK fixation, while titanium implants were used for 42 patients. Functional recovery was obtained in both groups and registered at last follow-up in terms of axial pain and neurological status. No significative differences were found between the two groups in terms of post-operative clinical complications and hardware-related complications. CFR-PEEK implants constitute a feasible and effective way to restore stability in metastatic spine tumors. This study found a non inferior favorable profile in terms of intraoperative and postoperative complications and functional recovery, compared to titanium. Further prospective studies are needed to clarify the potential oncological advantage of their radiolucency.

The Era of Cortical Bone Trajectory Screws in Spine Surgery: A Qualitative Review with Rating of Evidence.

The use of cortical bone trajectory (CBT) pedicle screws for posterior fixation and fusion seems to constitute a viable alternative for spinal procedures, with the potential to mitigate risks, be minimally invasive, and cause less tissue damage than the traditional technique. This review analyzes the literature regarding CBT according to the rate of evidence of articles and their main focus. CBT has proved to be a safe and viable option for screw fixation in spine surgery. Given the denser bone interception, high-quality biomechanics studies show equal or even better properties compared with classic pedicle screw fixation, depending on several factors such as screw size and length. Through the years, surgical technique has improved to gain a longer and safer trajectory than first described. Level 2 and 3 clinical studies suggest equal clinical and radiologic outcomes compared with pedicle trajectory fixation, but high-quality, level 1, randomized controlled trials are needed to confirm these results.

Cervical Interfacet Spacers to Promote Indirect Decompression and Enhance Fusion in Degenerative Spine: A Review.

BACKGROUND: Among the posterior techniques, the use of cervical interfacet spacers (CISs) represents a promising technology whose potentialities are still being studied. The purpose of the present review was to assess the available data on CISs. METHODS: A search on PubMed was performed. The search terms were "cervical interfacet spacers," "facet spacers," "DTRAX facet system," "Goel facet spacer," "pseudarthrosis," "cervical lordosis," "iatrogenic kyphosis," "cervical foraminal decompression," "cervical biomechanics," "atlantoaxial instability," and "subaxial instability." RESULTS: Mechanical studies have shown that stand-alone CISs promoted stiffness in all directions, except for extension. Foraminal distraction was recorded in 86% of the cases. Clinical studies have shown that the use of CISs could promote successful arthrodesis, given the large surface area affected by fusion and decreasing the need for autografts. The effectiveness for the treatment of radiculopathy has been confirmed by several clinical studies. In a series of 154 levels of implanted CISs, no evidence of significant loss of cervical lordosis was identified. CISs could help in enhancing fusion in C1-C2 fixation. CONCLUSIONS: Biomechanical studies on specimens showed a positive trend in increasing stiffness of the cervical spine, despite some controversial results. In clinical studies, facet distraction was shown to be a safe and valid option for clinical indirect decompression, although longer follow-up is required for confirmation. No evidence of the loss of cervical lordosis has been recorded. The long-term effects and CIS use in revision procedures as adjuvant implants to treat pseudarthrosis or atlantoaxial instability are currently under investigation, and further studies are needed.

Preoperative 3D CT Planning for Cortical Bone Trajectory Screws: A Retrospective Radiological Cohort Study.

BACKGROUND: Pedicle screw instrumentation is a standard procedure in lumbar spinal fusion. The cortical bone trajectory (CBT) screw is an alternative technique, less invasive but harder to perform. The identification of the entry point and the appropriate direction can be tricky especially to the surgeons just at the beginning. Therefore, the aim of this study is to evaluate the reliability of preoperative computed tomography (CT) planning in the CBT screw placement. METHODS: We retrospectively evaluated 82 patients who underwent a single-level posterior lumbar arthrodesis with CBT screws. The correct entry point and the best trajectory were identified on a 3-dimensional (3D) multiplanar reconstruction CT view. The concordance between achieved and planned trajectories was assessed on a postoperative CT. RESULTS: A total of 328 screws was positioned. The average entry point distance from the target was 1.1 mm (standard deviation, ±0.15 mm). In 301 screws (91.8%), the obtained trajectory differed no more than 2° from the planned one. No screws misplaced or new neurological deficit was recorded. CONCLUSIONS: The CBT screw placement is a great alternative to the pedicle screw. Accurate preoperative 3D planning is useful to predict the entry point and the direction with accuracy similar to navigation systems, avoiding its costs and technical difficulties. The 3D CT planning is helpful in the customization of spine surgery, and the results underline the radiological reliability of this technique.

Cortical bone trajectory screws for circumferential arthrodesis in lumbar degenerative spine: clinical and radiological outcomes of 101 cases.

PURPOSE: The use of cortical bone trajectory (CBT) pedicle screws for circumferential interbody fusion represents a viable alternative for single-level procedure with reduced invasiveness and less tissue destruction than the traditional technique. In addition, CBT screws have a potentially stronger pullout strength because of the greater amount of cortical bone intercepted. Only few series exist evaluating clinical and radiological outcomes of CBT screws. METHODS: This is a retrospective cohort study. All patients that underwent circumferential lumbar interbody fusion with CBT screws in our institution from 2014 to 2017 were reviewed. Patient demographics, clinical outcome with visual analogue scale (VAS) and Oswestry Disability Index (ODI), radiological data such as fusion, lordosis and muscle trauma, operative blood loss, hospital stay and use of fluoroscopy were evaluated. RESULTS: A total of 101 patients undergoing CBT-arthrodesis for degenerative lumbo-sacral disease were reviewed. Mean procedural time was 187 min. The mean operative blood loss and X-ray dose per procedure was 383 ml and 1.60 mg cm2, respectively. The mean hospital stay was 3.47 days. The mean follow-up was 18.23 months. Mean lordosis increment at the treated level was 4.2°. When the follow-up was longer than 12 months (53% of patients), fusion was obtained in 94% of cases. Mean ODI and VAS index improved with statistical significance. CONCLUSIONS: This is to our knowledge that the largest available study regarding CBT for circumferential arthrodesis. Results underlined the safety of this technique and the promising clinical and radiological outcomes that will need a longer follow-up. These slides can be retrieved under Electronic Supplementary material.