Emission of particulate and gaseous pollutants from household laser processing machine.

Indoor air quality (IAQ) directly affects the health of occupants. Household manufacturing equipment (HME) used for hobbies or educational purposes is a new and unexplored source of air pollution. In this study, we evaluated the characteristics of particulate and gaseous pollutants produced by a household laser processing equipment (HLPE). Various target materials were tested using a commercial HLPE under various operating conditions of laser power and sheath air flow rate. The mode diameters of the emitted particles gradually decreased as laser power increased, while the particle number concentration (PNC) and particle emission rate (PER) increased. In addition, as the sheath air flow rate quadrupled from 10 to 40 L/min, the mode diameter of the emitted particles decreased by nearly 25%, but the effect on the PNC was insignificant. When the laser induced the target materials at 53 mW, the mode diameters of particles were <150 nm, and PNCs were >2.0 × 104 particles/cm3. Particularly, analyses of sampled aerosols indicated that harmful substances such as sulfur and barium were present in particles emitted from leather. The carcinogenic gaseous pollutants such as acrylonitrile, acetaldehyde, 1,3-butadiene, benzene, and C8 aromatics (ethylbenzene) were emitted from all target materials. In an actual indoor environment, the PNC of inhalable ultrafine particles (UFPs) was >5 × 104 particles/cm3 during 30 min of HLPE operation. Our results suggest that more meticulous control methods are needed, including the use of less harmful target materials along with filters or adsorbents that prevent emission of pollutants.

A 3D-printed metal column for micro gas chromatography.

In this work, a 3D-printed metal column was developed for micro gas chromatography (GC) applications and its properties and gas separation performances were characterized. By using a Ti6Al4V grade 23 powder, a square spiral one meter-long column (3D-column) was 3D-printed on a planar substrate of 3.4 × 3.3 × 0.2 cm and then perhydropolysilazane (PHPS) was deposited as a pre-treatment agent, followed by a coating of stationary phase (OV-1) onto the inner wall of the micro-channel. The 500 µm-diameter circular channel and two 800 µm-wide ports of the 3D-column were confirmed to be uniform by 3D X-ray microscopy without any distortion. The physical and thermal properties of the 3D-column were found to be very similar to that of the standard Ti6Al4V grade 23 alloy with near zero porosity (∼0.07%). The 3D-column with pre-treatment and stationary coating demonstrated efficient separation performance of gas mixtures containing alkanes, aromatics, alcohols, and ketones compared to a bare or only pretreated 3D-column in terms of the peak shape, broadening, and resolution (R > 1) within 2-3 min. The well-matched thermal responses to the target temperatures were demonstrated at the ramping rates of 10-20 °C min-1 upto 200 °C with uniform heat distribution over the 3D-column. In addition, the column bleed profiles showed that the 3D-column with PHPS had a 71% lower baseline intensity at 350 °C than that without PHPS. The 3D-column was then employed to separate a gas mixture of twelve alkanes (C9-C18, C22, C24) without any significant column bleeding and peak tailing. Therefore, the thermal responses and stability of the 3D-column promise its applicability in high temperature GC applications.

Ultrasensitive, Selective, and Highly Stable Bioelectronic Nose That Detects the Liquid and Gaseous Cadaverine.

Field-effect transistor (FET) devices based on conductive nanomaterials have been used to develop biosensors. However, development of FET-based biosensors that allow efficient stability, especially in the gas phase, for obtaining reliable and reproducible responses remains a challenge. In this study, we developed a nanodisc (ND)-functionalized bioelectronic nose (NBN) based on a nickel (Ni)-decorated carboxylated polypyrrole nanoparticle (cPPyNP)-FET that offers the detection of liquid and gaseous cadaverine (CV). The TAAR13c, specifically binding to CV, which is an indicator of food spoilage, was successfully constructed in NDs. The NBN was fabricated by the oriented assembly of TAAR13c-embedded NDs (T13NDs) onto the transistor with Ni/cPPyNPs. The NBN showed high performance in selectivity and sensitivity for the detection of CV, with excellent stability in both aqueous and gas phases. Moreover, the NBN allowed efficient measurement of corrupted real-food samples. It demonstrates the ND-based device can allow the practical biosensor that provides high stability in the gas phase.