Saddle antenna radio frequency ion sources.

Existing RF ion sources for accelerators have specific efficiencies for H(+) and H(-) ion generation ∼3-5 mA/cm(2) kW, where about 50 kW of RF power is typically needed for 50 mA beam current production. The Saddle Antenna (SA) surface plasma source (SPS) described here was developed to improve H(-) ion production efficiency, reliability, and availability. In SA RF ion source, the efficiency of positive ion generation in the plasma has been improved to 200 mA/cm(2) kW. After cesiation, the current of negative ions to the collector was increased from 1 mA to 10 mA with RF power ∼1.5 kW in the plasma (6 mm diameter emission aperture) and up to 30 mA with ∼4 kW RF. Continuous wave (CW) operation of the SA SPS has been tested on the test stand. The general design of the CW SA SPS is based on the pulsed version. Some modifications were made to improve the cooling and cesiation stability. CW operation with negative ion extraction was tested with RF power up to ∼1.2 kW in the plasma with production up to Ic = 7 mA. A stable long time generation of H(-) beam without degradation was demonstrated in RF discharge with AlN discharge chamber.

Surface plasma source with saddle antenna radio frequency plasma generator.

A prototype RF H(-) surface plasma source (SPS) with saddle (SA) RF antenna is developed which will provide better power efficiency for high pulsed and average current, higher brightness with longer lifetime and higher reliability. Several versions of new plasma generators with small AlN discharge chambers and different antennas and magnetic field configurations were tested in the plasma source test stand. A prototype SA SPS was installed in the Spallation Neutron Source (SNS) ion source test stand with a larger, normal-sized SNS AlN chamber that achieved unanalyzed peak currents of up to 67 mA with an apparent efficiency up to 1.6 mA∕kW. Control experiments with H(-) beam produced by SNS SPS with internal and external antennas were conducted. A new version of the RF triggering plasma gun has been designed. A saddle antenna SPS with water cooling is fabricated for high duty factor testing.

Pathologic outcome in HIV-seropositive individuals with nonspecific bronchoalveolar lavage cytology.

OBJECTIVE: To determine the pathologic outcome in human immunodeficiency virus (HIV)-seropositive individuals with nonspecific bronchoalveolar lavage (BAL) cytology. STUDY DESIGN: The study group consisted of 126 cytologically negative or nonspecific BAL specimens from HIV-seropositive adults. Concurrent microbial cultures and transbronchial biopsies, as well as subsequent pulmonary cytology, lung biopsy or autopsy results were reviewed. Additionally, the cytologic morphology of specimens from patients found to have a potential bacterial pathogen was reviewed. RESULTS: In the 126 cases with nonspecific BAL cytology, a potential pulmonary pathogen was identified from a concurrent or subsequent pathologic specimen in 27% of cases, while no pathogen was identified in 73% of cases. Bacteria and fungi were the most common pathogens identified. Microbial cultures alone identified the pathogen in 59% of cases, while transbronchial biopsy added information in only 9%. Specimens with marked acute inflammation often yielded bacterial pathogens on microbial culture. CONCLUSION: A potential pulmonary pathogen can be identified in 27% of HIV-seropositive individuals with negative BAL cytology using other diagnostic modalities. Bacterial pathogens are most common and are usually identified by microbial culture. Marked acute inflammation in a BAL specimen is often associated with bacterial pneumonia.