Exploring the Effect of Iron Metal-Organic Framework Particles in Polylactic Acid Membranes for the Azeotropic Separation of Organic/Organic Mixtures by Pervaporation.

A microporous carboxylate metal-organic framework MIL-100 Fe was prepared as submicron particles by microwave-assisted hydrothermal synthesis (Fe-MOF-MW). This product was explored, for the first time, for the preparation of polylactic acid (PLA) mixed matrix membranes. The produced MOF was characterised by powder X-ray diffraction (PXRD), environmental scanning electron microscopy (ESEM) as well as by thermogravimetric analysis (TGA) and nitrogen adsorption/desorption. The effect of different Fe-MOF-MW concentrations (0.1 and 0.5 wt%) on the membrane properties and performance were evaluated. These membranes were used in the pervaporation process for the separation of methanol/methyl tert-butyl-ether mixtures at the azeotropic point. The influence of the feed temperature and vacuum pressure on the membrane performance was evaluated and the results were compared with PLA pristine membranes. Moreover, the produced membranes have been characterised in terms of morphology, MOF dispersion in the polymeric membrane matrix, wettability, thickness, mechanical resistance and swelling propensity. The presence of Fe-MOF-MW was found to have a beneficial effect in improving the selectivity of mixed matrix membranes towards methanol at both concentrations. The highest selectivity was obtained for the PLA membranes embedded with 0.5 wt% of Fe-MOF-MW and tested at the temperature of 25 °C and vacuum pressure of 0.09 mbar.

Formation of metallic silver and copper in non-aqueous media by ultrasonic radiation.

Concentrated suspensions of silver and copper salts in silicone oil were heated to 200 °C and irradiated with ultrasonic energy for different time durations. Characterization of the products was done using X-ray powder diffraction. In most cases, metallic Ag or Cu were obtained, together with their oxide forms Ag2O and Cu2O. The salts, used as precursors, do not dissolve in silicone oil but rather form a heterogeneous system, and we assume that local heating, caused by the acoustic cavitation, enhanced their thermal decomposition and the formation of metallic particles. It was found that the presence of silver particles enhances the formation of metallic copper. This phenomenon was observed in the experiment with the acetate salts mixture.

PEGylation and preliminary biocompatibility evaluation of magnetite-silica nanocomposites obtained by high energy ball milling.

High energy ball milling (HEBM) has been used for the first time to prepare PEGylated magnetite-silica (Fe(3)O(4)-SiO(2)) nanocomposites intended to be used for biological purposes. Surface amine groups were introduced by a silanization reaction involving 3-aminopropyl triethoxysilane (APTS) followed by PEGylation to yield long-term stable and stealth nanocomposites of 200nm in diameter. The efficient coverage by PEG chains was shown by isothermal titration calorimetry (ITC) where PEGylated nanocomposites did not interact with BSA compared to non-PEGylated counterparts which led to a significant change in enthalpy. By cell viability (MTT) assays and cell morphology investigations, it was evidenced that PEGylated Fe(3)O(4)-SiO(2) nanocomposites did not provide any appreciable cytotoxicity on J774 macrophage and MCF-7 breast cancer cell lines. Furthermore, noticeable internalization was evidenced by J774 cells with PEGylated Fe(3)O(4)-SiO(2) nanocomposites in contrast to MCF-7 cells, in good agreement with the respective tendency of each cell line for endocytosis.