Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Mais filtros











Intervalo de ano de publicação
1.
Acta Cir Bras ; 39: e394024, 2024.
Artigo em Inglês | MEDLINE | ID: mdl-39046042

RESUMO

PURPOSE: To evaluate the effects on peripheral neural regeneration of the end-to-side embracing repair technique compared to the autograft repair technique in Wistar rats. METHODS: Fifteen male Wistar rats were divided into three groups with five animals each: denervated group (GD), autograft group (GA), and embracing group (EG). For the evaluation, the grasping test, electroneuromyography (ENMG), and muscle weight assessment were used. RESULTS: Muscle weight assessment and ENMG did not show significant neural regeneration at the end of 12 weeks in the DG and GE groups, but only in GA. The grasping test showed an increase in strength between the surgery and the fourth week in all groups, and only the GA maintained this trend until the 12th week. CONCLUSIONS: The present study indicates that the neural regeneration observed in the end-to-side embracing neurorrhaphy technique, in the repair of segmental neural loss, is inferior to autograft repair in Wistar rats.


Assuntos
Regeneração Nervosa , Ratos Wistar , Animais , Masculino , Regeneração Nervosa/fisiologia , Eletromiografia , Ratos , Procedimentos Neurocirúrgicos/métodos , Músculo Esquelético/inervação , Traumatismos dos Nervos Periféricos/cirurgia , Transplante Autólogo/métodos , Fatores de Tempo , Reprodutibilidade dos Testes , Nervo Isquiático/cirurgia , Nervo Isquiático/lesões , Nervo Isquiático/fisiologia
2.
Acta cir. bras ; 39: e394024, 2024. tab, ilus
Artigo em Inglês | LILACS, VETINDEX | ID: biblio-1563642

RESUMO

Purpose: To evaluate the effects on peripheral neural regeneration of the end-to-side embracing repair technique compared to the autograft repair technique in Wistar rats. Methods: Fifteen male Wistar rats were divided into three groups with five animals each: denervated group (GD), autograft group (GA), and embracing group (EG). For the evaluation, the grasping test, electroneuromyography (ENMG), and muscle weight assessment were used. Results: Muscle weight assessment and ENMG did not show significant neural regeneration at the end of 12 weeks in the DG and GE groups, but only in GA. The grasping test showed an increase in strength between the surgery and the fourth week in all groups, and only the GA maintained this trend until the 12th week. Conclusions: The present study indicates that the neural regeneration observed in the end-to-side embracing neurorrhaphy technique, in the repair of segmental neural loss, is inferior to autograft repair in Wistar rats.


Assuntos
Animais , Ratos , Transplante Autólogo , Ratos Wistar , Nervo Mediano , Microcirurgia , Regeneração Nervosa
3.
Rev. Col. Bras. Cir ; 49: e20223217, 2022. tab, graf
Artigo em Inglês | LILACS-Express | LILACS | ID: biblio-1422716

RESUMO

ABSTRACT Objectives: develop an easily accessible model for training the initial motor practice in microsurgery using corn kernels. Methods: ten corn kernels (Zea mays) were used. A 7mm longitudinal cut was made on one side of the corn grain. The training consisted of performing 4 simple knots between the edges of the incision, using 10-0 mononylon thread. The parameters analyzed were 1) cost of the model; 2) assembly time of the model test system; 3) time for performing the knots; 4) distance between the knots. Results: in all corn kernels tested, it was possible to perform the proposed microsurgical suture training, without any difficulty in the procedure. The average time to perform the 4 knots was 6.51±1.18 minutes. The total cost of the simulator model was R$3.59. The average distance between the knots was 1.7±0.3mm. The model developed from corn grains has an extremely low cost when compared to the use of animals or high-tech simulators. Other advantages are the easy availability of canned corn kernels and the possibility of making more than four knots along the 7mm incision. Conclusion: the training model developed has low cost, is easy to acquire and viable for training basic manual skills in microsurgery.


RESUMO Objetivo: desenvolver um modelo facilmente acessível para o treinamento da prática motora inicial em microcirurgia a partir da utilização de grãos de milho. Métodos: foram utilizados dez grãos de milho (Zea mays). Realizou-se um corte longitudinal de 7mm em uma das faces do grão de milho. O treinamento consistiu na realização de 4 pontos simples entre as bordas da incisão, utilizando fio de mononáilon 10-0. Os parâmetros analisados foram 1) custo do modelo; 2) tempo de montagem do sistema de teste do modelo; 3) tempo de realização dos nós; 4) distância entre os pontos. Resultados: em todos os grãos testados foi possível realizar o treinamento de sutura microcirúrgica proposto, sem dificuldade ao procedimento. O tempo médio para a realização dos 4 pontos foi de 6,51±1,18 minutos. O custo total do modelo simulatório foi de R$3,59. A distância média entre os pontos foi de 1,7±0,3mm. O modelo desenvolvido a partir de grãos de milhos apresenta custo extremamente baixo quando comparado ao uso de animais ou de simuladores de alta tecnologia. Outras vantagens são fácil disponibilidade de grãos de milho em conserva e possibilidade de serem realizados mais de quatro pontos ao longo da incisão de 7mm. Conclusão: o modelo de treinamento desenvolvido é de baixo custo, de fácil aquisição e viável para o treinamento de habilidades manuais básicas em microcirurgia.

4.
Rev. bras. oftalmol ; 81: e0040, 2022. graf
Artigo em Inglês | LILACS | ID: biblio-1376790

RESUMO

ABSTRACT Purpose: To describe a new accessible model of ophthalmological training using chicken eggs. Methods: With the aid of a spherical drill, the external calcified layer and the cuticle of the chicken eggshell were removed in a 2cm diameter circle. Using a video-magnification system, the film was dissected and cut to approximately 1.5 cm diameters. The film was removed and repositioned to make interrupted 12-0 nylon microsutures. The parameters analyzed were: cost, facility of acquisition and handling, time for making the model and the microsutures and number of possible uses. Results: In all simulators, it was possible to carry out separated and equidistant micro-sutures in the egg membrane, without the need for reintervention. Conclusion: The new chicken-egg model for ophthalmic surgery training is low-cost, easy to acquire and handle, and viable for the development of basic microsurgery skills.


RESUMO Objetivo: Descrever um novo modelo acessível de treinamento oftalmológico com ovo de galinha. Métodos: Com o auxílio de uma broca esférica, a camada calcificada externa e a cutícula da casca do ovo de galinha foram retiradas em um círculo 2 cm de diâmetro. Mediante um sistema de videomagnificação, a película foi dissecada e cortada em formato aproximado de 1,5 cm de diâmetro. A película foi removida e reposicionada para a confecção de microssuturas interrompidas com nylon 12-0. Os parâmetros analisados foram: custo, facilidade de aquisição e manuseio, tempo para confecção do modelo e para a confecção das microssuturas e número de utilizações possíveis. Resultados: Em todos os simuladores foi possível realizar microssuturas separadas e equidistantes na membrana do ovo, sem necessidade de reintervenção. Conclusão: O novo modelo com ovo de galinha para o treinamento de cirurgia oftalmológica é de baixo custo, fácil aquisição e manuseio, além de ser viável no desenvolvimento de habilidades básicas em microcirurgia.


Assuntos
Animais , Procedimentos Cirúrgicos Oftalmológicos/educação , Casca de Ovo , Treinamento por Simulação/métodos , Microcirurgia/educação , Modelos Anatômicos , Oftalmologia/educação , Galinhas , Técnicas de Sutura/educação , Ovos
5.
J Reconstr Microsurg ; 37(2): 119-123, 2021 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-32698201

RESUMO

BACKGROUND: Microsurgery training is critical to the practice of microvascular procedures in many surgical areas. However, even simple procedures require different levels of complex skills. Therefore, simulation-based surgical training, mainly in the area of vascular anastomosis, is of great importance. In this paper, we present a new microsurgery training model for the development of basic to advanced microsurgical skills. METHODS: Porcine kidneys were purchased from a legal butchery slaughterhouse. First, kidneys were washed with water to remove blood and clots inside vessels. Then, dissection was performed throughout the vascular pedicle from the renal arteries to the segmentary branches. Finally, the longitudinal sectioning of the kidney parenchyma was performed to expose the vessels necessary for training. Sixty end-to-end anastomoses were performed. Specific instruments and materials were used to perform anastomoses and dissections with magnification by a video system. We evaluated the diameter of vessels, time to perform anastomosis, and patency of anastomosis. RESULTS: There was no great anatomical variation among the porcine kidneys. The total length for dissection training was 25.80 ± 7.44 cm using the arterial and venous vessel. The average time to perform arterial anastomoses was 23.79 ± 4.55 minutes. For vessel diameters of ≤ 3, 4 to 6, and 7 to 10 mm, the average procedure times were 27.68 ± 3.39, 22.92 ± 4.12, and 20.77 ± 3.44 minutes, respectively. Regarding venous anastomosis, the average duration of the procedure was 26.17 ± 4.80 minutes, including durations of 31.61 ± 3.86, 25.66 ± 4.19, and 21.24 ± 3.79 minutes for vessel diameters of ≤ 7, 8 to 10, and >10 mm, respectively. Positive patency was achieved in all surgeries. CONCLUSION: The porcine kidney provides an inexpensive and convenient biological model for modeling microanastomosis with high fidelity to vascular structures.


Assuntos
Rim , Microcirurgia , Treinamento por Simulação , Anastomose Cirúrgica , Animais , Rim/cirurgia , Suínos , Procedimentos Cirúrgicos Vasculares
6.
Rev. bras. oftalmol ; 79(6): 366-369, nov.-dez. 2020. tab, graf
Artigo em Português | LILACS | ID: biblio-1156159

RESUMO

Resumo Objetivo: Desenvolver um modelo de treinamento de cirurgias corneanas utilizando uvas. Métodos: Foram empregadas uvas como estruturas que mimetizam o tamanho do globo ocular humano, recobertas com materiais de látex, simulando a pratica de cirurgias de córnea utilizando um sistema de videomagnificação. Foram realizados oito pontos simples. Foi avaliado o tempo de confecção do procedimento. Resultados: Foram realizadas 25 simulações como o modelo descrito. O tempo médio de realização da rafia foi de 34,56 ±5,79 minutos. A análise da correlação entre o tempo e a ordem das cirurgias mostrou uma redução no tempo de confecção. Conclusão: O modelo de treinamento oftalmológico utilizando uvas mostrou-se capaz de simular as etapas básicas do treinamento de suturas microcirúrgicas.


Abstract Objective: Develop a training model for corneal surgery using grapes. Methods: Grapes were used as structures that mimic the size of the human eyeball, covered with latex materials, simulating the practice of corneal surgery using a videomagnification system. Eight simple stitches were performed. The surgical time was evaluated. Results: 25 simulations were carried out as the model described. The mean time taken for the raffia was 34.56 ± 5.79 minutes. The analysis of the correlation between the time and the order of the surgeries showed a reduction in the confection time. Conclusion: The ophthalmic training model using grapes proved to be capable of simulating the basic stages of microsurgery suture training.


Assuntos
Suturas , Gravação em Vídeo , Tecnologia de Baixo Custo , Vitis , Educação Médica , Treinamento por Simulação , Microcirurgia , Estudos Transversais , Alternativas ao Uso de Animais
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA