Germicidal lamps using UV-C radiation may pose health safety issues: a biomolecular analysis of their effects on apoptosis and senescence.

The battle against the COVID-19 pandemic has spurred a heightened state of vigilance in global healthcare, leading to the proliferation of diverse sanitization methods. Among these approaches, germicidal lamps utilizing ultraviolet (UV) rays, particularly UV-C (wavelength ranging from 280 to 100 nm), have gained prominence for domestic use. These light-emitting diode (LED) lamps are designed to sanitize the air, objects, and surfaces. However, the prevailing concern is that these UV lamps are often introduced into the market without adequate accompanying information to ensure their safe utilization. Importantly, exposure to absorbed UV light can potentially trigger adverse biological responses, encompassing cell death and senescence. Our research encompassed a series of investigations aimed at comprehending the biological repercussions of UV-C radiation exposure from readily available domestic lamps. Our focus centered on epithelial retinal cells, keratinocytes, and fibroblasts, components of the skin and ocular targets frequently exposed to UV irradiation. Our findings underscore the potential harm associated with even brief exposure to UV, leading to irreversible and detrimental alterations in both skin cells and retinal cells of the eye. Notably, epithelial retinal cells exhibited heightened sensitivity, marked by substantial apoptosis. In contrast, keratinocytes demonstrated resilience to apoptosis even at elevated UV doses, though they were prone to senescence. Meanwhile, fibroblasts displayed a gradual amplification of both senescence and apoptosis as radiation doses escalated. In summary, despite the potential benefits offered by UV-C in deactivating pathogens like SARS-CoV-2, it remains evident that the concurrent risks posed by UV-C to human health cannot be ignored.

[The evaluation of optical radiation hazards: methods, case studies and critical aspects]. / La valutazione dei rischi da radiazioni ottiche: metodi, casi studio, criticità.

SUMMARY: Purpose. Currents methods for the evaluation and control of optical radiation hazards at workplaces are presented. Methods. Safe exposure criteria that may be readily applied to practical situations are discussed. Hazard evaluation techniques are discussed for a number of intense optical radiation sources. Examples include arc welding, germicidal lamps in medical and laboratories activities, metal and glass melting. Results. Hazard data and PPE choice criteria are provided, taking account of varied critical aspects from the case studies discussed. Conclusions. Some critical aspects in the optical radiation safety management have been discussed. The improvement of protection programmes is needed to raise awareness of the health hazards of optical radiation, and to achieve the application of simple engineering controls and/or administrative controls aimed at ensuring that workers are made aware of the presence of potentially harmful optical radiation and providing information to avoid such harmful exposure, according to AOR Directive.

Electromagnetic fields in neonatal incubators: the reasons for an alert.

BACKGROUND: Neonatal incubators are important tools for sick newborns in the first few days of life. Nevertheless, their electric engine, often very close to the newborn's body, emits electromagnetic fields (EMF) to which newborns are exposed. Aim of this paper is to review the available literature on EMF exposure in incubators, and the effects of such exposures on newborns that have been investigated. METHODS: We carried out a systematic review of studies about EMF emissions produced by incubators, using Medline and Embase databases from 1993 to 2017. RESULTS: We retrieved 15 papers that described the EMF exposure in incubators and their biological effects on babies. EMF levels in incubators appear to be between 2 and 100 mG, depending on the distance of the mattress from the electric engine. In some cases, they exceed this range. These values interfere with melatonin production or with vagal tone. Even caregivers are exposed to high EMF, above 200 mG, when working at close contact with the incubators. CONCLUSION: EMF have been described as potentially hazardous for human health, and values reported in this review are an alert to prevent babies' and caregivers' exposure when close to the incubators. A precautionary approach should be adopted in future incubator design, to prevent high exposures of newborns in incubators and of caregivers as well.

Blue Light and Ultraviolet Radiation Exposure from Infant Phototherapy Equipment.

Phototherapy is the use of light for reducing the concentration of bilirubin in the body of infants. Although it has become a mainstay since its introduction in 1958, a better understanding of the efficacy and safety of phototherapy applications seems to be necessary for improved clinical practices and outcomes. This study was initiated to evaluate workers' exposure to Optical Radiation from different types of phototherapy devices in clinical use in Italy. During infant phototherapy the staff monitors babies periodically for around 10 min every hour, and fixation of the phototherapy beam light frequently occurs: almost all operators work within 30 cm of the phototherapy source during monitoring procedures, with most of them commonly working at ≤25 cm from the direct or reflected radiation beam. The results of this study suggest that there is a great variability in the spectral emission of equipments investigated, depending on the types of lamps used and some phototherapy equipment exposes operators to blue light photochemical retinal hazard. Some of the equipment investigated presents relevant spectral emission also in the UVA region. Taking into account that the exposure to UV in childhood has been established as an important contributing factor for melanoma risk in adults and considering the high susceptibility to UV-induced skin damage of the newborn, related to his pigmentary traits, the UV exposure of the infant during phototherapy should be "as low as reasonably achievable," considering that it is unnecessary to the therapy. It is recommended that special safety training be provided for the affected employees: in particular, protective eyewear can be necessary during newborn assistance activities carried out in proximity of some sources. The engineering design of phototherapy equipment can be optimized. Specific requirements for photobiological safety of lamps used in the phototherapy equipment should be defined in the safety product standard for such equipment.

Occupational exposure to physical agents: the new Italian database for risk assessment and control.

This article presents the new Italian database of physical agents, which is available at http://www.portaleagentifisici.it. It supports in risk assessment employers who have to comply with Italy's Legislative Decree 81/2008 (transposing into law European Union Directives 2003/10/EC, 2002/44/EC, 2004/40/EC and 2006/25/EC). The database currently contains measurements and declared European Community (EC) values from over 2540 machines; in particular, the database hosts data on mechanical vibration from over 1430 hand-held power tools (e.g., pneumatic and electric hammers, chainsaws, grinders, drills, sanders and saws) and from over 1020 whole-body machines (e.g., buses, fork lifts and wheel tractors). The database is continuously updated as soon as new experimental and declared data are acquired.

[Solar ultraviolet radiation risk in outdoor workers: a specific project of Tuscany Region (Italy)]. / Rischio da radiazione solare ultravioletta nei lavoratori outdoor: piano mirato della Regione Toscana.

OBJECTIVE: The aims of Tuscany Regional project were: to study the sun protection attitude of outdoor workers; to measure solar ultraviolet (UV) exposure in work environment; to describe the frequency of photoaging, precancerous lesions, and skin cancers in outdoor workers; to collect information on solar ultraviolet radiation exposure from incident cases of Non-Melanoma Skin Cancer (NMSC) recruited from Tuscany Cancer Registry. DESIGN: Outdoor workers completed a questionnaire devoted to collect information on sun protection attitudes during a typical summer working week. Environmental and personal measurements were carried out. Expert dermatologists examined outdoor workers to assess the frequency of photoaging, precancerous lesions, and skin cancer. A structured questionnaire was mailed to incident cases of NMSC. Information were collected on personal habits and working history, focusing on solar ultraviolet radiation exposure. SETTING AND PARTICIPANTS: Agriculture, construction, quarrying and fishing activities were considered: 292 employees responded to questions about the type of clothing used in the morning and in the afternoon,while working outdoors; 637 outdoor workers underwent skin examination. We contacted 743 cases of NMSC occurred in 2004; 498 subjects accepted to participate in this study. RESULTS: The clothing worn by surveyed subjects was often inadequate compared to the high level of exposure to UV. The skin examination of 637 outdoor workers highlighted 2 melanomas, 7 epitheliomas and 35 actinic keratoses. Among the 498 cases of NMSC, 135 (27%) were diagnosed in outdoor workers. Most represented economic activity sectors were: agriculture, construction, transport, sports. CONCLUSION: The characterization of outside workers revealed unsatisfactory sun protection behaviours. Moreover, previously undetected skin cancers were diagnosed. The study on MNSC confirms the complexity of studying the exposure to UV radiation. The Tuscany Regional project provided useful information on the risk of solar ultraviolet radiation in outdoor workers. Prevention programs are needed.

Occupational exposure to mechanical vibration: the Italian vibration database for risk assessment.

The Italian vibration database is presented. It is hosted by a web server at the National Institute of Occupational Prevention and Safety (ISPESL) in Rome, Italy (http: / /www.ispesl.it/vibrationdatabase). It supports in risk assessment employers who have to comply with Legislative Decree 187/05, now replaced by Legislative Decree 81/08, which transposes into law Vibration Directive 2002/44/EC. The database currently contains measurements and EC-declared values from over 980 hand-held power tools (such as pneumatic and electric hammers, chainsaws, grinders, drills, sanders and saws) and from over 420 vehicles (such as buses, forklifts and wheel tractors). The database is continuously updated as soon as new experimental and declared data are acquired.