Face masks invading protected areas: Risks and recommendations.

Among the indirect environmental impacts generated by the global COVID-19 pandemic, contamination with personal protective equipment (PPE), like face masks, may be one of the most relevant ones. PPE has been found in multiple aquatic, marine, and terrestrial environments, including places of absolute relevancy to biodiversity conservation, such as protected areas (PAs). Here, a brief report of the presence of PPE in six PAs of Peru is presented. PPE pollution in PAs consisted mainly of single-use and reusable face masks, as well as plastics associated with PAs, such as KN95 respirator wrappings. The mean PPE density was estimated as 1.32 × 10-3 PPE/m2. FTIR spectroscopy confirmed that face masks and wrappers mainly consisted of polypropylene and polyethylene, two of the most commonly available synthetic polymers. The material was poorly degraded according to their FTIR spectra, possibly suggesting that they were discarded recently. The recent ban on single-use plastic in Peruvian PAs is regarded as a great step forward toward the efforts made to preserve these invaluable places. However, these measures seemed insufficient to prevent PPE and other types of litter from contaminating areas of ecological importance. Considering the current scenario, several recommendations were proposed to be implemented in PAs in order to prevent PPE from becoming a new plastic issue to tackle. These recommendations are expected to also serve for future events where the use of single-use plastics becomes inevitable, like global pandemics.

First record of plastiglomerates, pyroplastics, and plasticrusts in South America.

Beaches in the Anthropocene carry the heavy burden of human-derived pollution, like that induced by plastic litter. For decades, plastic debris has been classified based on its source or physical size. In recent years, studies described and documented new forms of plastic formations, including plastiglomerates, plasticrusts, and pyroplastics. However, reports of these newly described formations are substantially lacking. Therefore, in the present study, we reported the first evidence of plasticrusts (plastic encrusting rock surfaces), plastiglomerates (organic/inorganic composite materials in a plastic matrix), and pyroplastics (burned and weathered plastics) in Peru. The plastic pollutants were recovered from the field through marine litter surveys on four beaches where illegal litter burning and campfires take place. All the suspected plastic formations were analyzed and confirmed using Fourier transformed infrared (FTIR) spectroscopy, and one of each type was analyzed by X-Ray fluorescence (EDX) spectrometry. Plastiglomerates consisted of a high-density polyethylene (HDPE) or polypropylene (PP) matrix with rock and sand inclusions. Pyroplastics were found in various stages of weathering and consisted of various polymers, including HDPE, PP, polyethylene terephthalate (PET), and polyamide (PA). Interestingly, our field observations suggest a new plasticrust formation pathway based on plastic burning and filling of rock crevices with molten plastic. The latter was identified as either PP or HDPE. Elements typically found in the sand and seawater (e.g., Na, Cl, Ca, Si, Fe) were identified on the surface of the plastic formations, as well as others that could potentially be associated with the leaching of additives (e.g., Ti, Br). Although the present study contributed to the knowledge concerning the occurrence of the new types of plastic formations, as well as possible formation pathways, there are still many questions to answer. Hence, we encourage future studies to focus on the toxicity that new plastic formations may induce in contrast with conventional plastics, the release of secondary contaminants (e.g., microplastics, additives), and their degradation in the environment. Lastly, standardized sampling and data treatment protocols are required.

Degradation of plastics associated with the COVID-19 pandemic.

The ongoing COVID-19 pandemic has resulted in an unprecedented form of plastic pollution: personal protective equipment (PPE). Numerous studies have reported the occurrence of PPE in the marine environment. However, their degradation in the environment and consequences are poorly understood. Studies have reported that face masks, the most abundant type of PPE, are significant sources of microplastics due to their fibrous microstructure. The fibrous material (mostly consisting of polypropylene) exhibits physical changes in the environment, leading to its fracture and detachment of microfibers. Most studies have evaluated PPE degradation under controlled laboratory conditions. However, in situ degradation experiments, including the colonization of PPE, are largely lacking. Although ecotoxicological studies are largely lacking, the first attempts to understand the impact of MPs released from face masks showed various types of impacts, such as fertility and reproduction deficiencies in both aquatic and terrestrial organisms.

Binational survey of personal protective equipment (PPE) pollution driven by the COVID-19 pandemic in coastal environments: Abundance, distribution, and analytical characterization.

In the present contribution, two nationwide surveys of personal protective equipment (PPE) pollution were conducted in Peru and Argentina aiming to provide valuable information regarding the abundance and distribution of PPE in coastal sites. Additionally, PPE items were recovered from the environment and analyzed by Fourier transformed infrared (FTIR) spectroscopy, Scanning electron microscopy (SEM) with Energy dispersive X-ray (EDX), and X-ray diffraction (XRD), and compared to brand-new PPE in order to investigate the chemical and structural degradation of PPE in the environment. PPE density (PPE m-2) found in both countries were comparable to previous studies. FTIR analysis revealed multiple polymer types comprising common PPE, mainly polypropylene, polyamide, polyethylene terephthalate, and polyester. SEM micrographs showed clear weathering signs, such as cracks, cavities, and rough surfaces in face masks and gloves. EDX elemental mapping revealed the presence of elemental additives, such as Ca in gloves and face masks and AgNPs as an antimicrobial agent. Other metals found on the surface of PPE were Mo, P, Ti, and Zn. XRD patterns displayed a notorious decrease in the crystallinity of polypropylene face masks, which could alter its interaction with external contaminants and stability. The next steps in this line of research were discussed.

Macroalgae in biomonitoring of metal pollution in the Bay of Bengal coastal waters of Cox's Bazar and surrounding areas.

Although coastal water marine algae have been popularly used by others as indicators of heavy metal pollution, data within the Bay of Bengal for the estuarine Cox's Bazar region and Saint Martin's Island has remained scarce. Using marine algae, the study herein forms an effort in biomonitoring of metal contamination in the aforementioned Bangladesh areas. A total of 10 seaweed species were collected, including edible varieties, analyzed for metal levels through the use of the technique of EDXRF. From greatest to least, measured mean metal concentrations in descending order have been found to be K > Fe > Zr > Br > Sr > Zn > Mn > Rb > Cu > As > Pb > Cr > Co. Potential toxic heavy metals such as Pb, As, and Cr appear at lower concentration values compared to that found for essential mineral elements. However, the presence of Pb in Sargassum oligocystum species has been observed to exceed the maximum international guidance level. Given that some of the algae species are cultivated for human consumption, the non-carcinogenic and carcinogenic indices were calculated, shown to be slightly lower than the maxima recommended by the international organizations. Overall, the present results are consistent with literature data suggesting that heavy metal macroalgae biomonitoring may be species-specific. To the best of our knowledge, this study represents the first comprehensive macroalgae biomonitoring study of metal contamination from the coastal waters of Cox's Bazar and beyond.

Marine macroinvertebrates inhabiting plastic litter in Peru.

Marine litter, such as plastic bags, bottles, fabrics, or fishing gear, serve as a shelter for many marine organisms that are likely to colonize artificial substrata. Such assemblages can potentially turn marine litter into vectors of alien invasive species (AIS). Here, we report the abundance and diversity of macroinvertebrates inhabiting marine litter in Peruvian beaches. Results indicate that most of the fouled items found came from land-based sources (81.5%) and Bivalvia was the most abundant class (53.5%), mainly composed of the mussel Semimytilus algosus. No significant differences were found in the abundance and diversity of macroinvertebrates (class level) among sampling sites or sources of litter. Polypropylene and low-density polyethylene items were most frequently found with fouled biota. Although none of the identified species were non-native to the coast of Peru, we discuss marine litter as a potential source of AIS in this region.