Chlorination of para-substituted phenols: Formation of α, ß-unsaturated C4-dialdehydes and C4-dicarboxylic acids.

Despite the widespread occurrence of phenols in anthropogenic and natural compounds, their fate in reactions with hypochlorous acid (HOCl), one of the most common water treatment disinfectants, remains incompletely understood. To close this knowledge gap, this study investigated the formation of disinfection by-products (DBPs) in the reaction of free chlorine with seven para-substituted phenols. Based on the chemical structures of the DBPs and the reaction mechanisms leading to their formation, the DBPs were categorized into four groups: chlorophenols, coupling products, substituent reaction products, and ring cleavage products. In contrast to previous studies that investigated the formation of early-stage chlorophenols, the primary focus of this study was on the elucidation of novel ring cleavage products, in particular α, ß-unsaturated C4-dialdehydes, and C4-dicarboxylic acids, which, for the first time, were identified and quantified in this study. The molar yields of 2-butene-1,4-dial (BDA), one of the identified α, ß-unsaturated C4-dialdehydes, varied among the different phenolic compounds, reaching a maximum value of 10.4% for bisphenol S. Molar yields of 2-chloromaleic acid (Cl-MA), one of the identified C4-dicarboxylic acids, reached a maximum value of 30.5% for 4-hydroxy-phenylacetic acid under given conditions. 2,4,6-trichlorophenol (TCP) was shown to be an important intermediate of the parent phenols and the C4-ring cleavage products. Based on the temporal trends of α, ß-unsaturated C4-dialdehydes and C4-dicarboxylic acids, their formation is likely attributable to two separate ring cleavage pathways. Based on the obtained results, an overall transformation pathway for the reaction of para-substituted phenols with free chlorine leading to the formation of novel C4 ring cleavage products was proposed.

Characterizing the Chemical Landscape in Commercial E-Cigarette Liquids and Aerosols by Liquid Chromatography-High-Resolution Mass Spectrometry.

The surge in electronic cigarette (e-cig) use in recent years has raised questions on chemical exposures that may result from vaping. Previous studies have focused on measuring known toxicants, particularly those present in traditional cigarettes, while fewer have investigated unknown compounds and transformation products formed during the vaping process in these diverse and constantly evolving products. The primary aim of this work was to apply liquid chromatography-high-resolution mass spectrometry (LC-HRMS) and chemical fingerprinting techniques for the characterization of e-liquids and aerosols from a selection of popular e-cig products. We conducted nontarget and quantitative analyses of tobacco-flavored e-liquids and aerosols generated using four popular e-cig products: one disposable, two pod, and one tank/mod. Aerosols were collected using a condensation device and analyzed in solution alongside e-liquids by LC-HRMS. The number of compounds detected increased from e-liquids to aerosols in three of four commercial products, as did the proportion of condensed-hydrocarbon-like compounds, associated with combustion. Kendrick mass defect analysis suggested that some of the additional compounds detected in aerosols belonged to homologous series resulting from decomposition of high-molecular-weight compounds during vaping. Lipids in inhalable aerosols have been associated with severe respiratory effects, and lipid-like compounds were observed in aerosols as well as e-liquids analyzed. Six potentially hazardous additives and contaminants, including the industrial chemical tributylphosphine oxide and the stimulant caffeine, were identified and quantified in the e-cig liquids and aerosols analyzed. The obtained findings demonstrate the potential of nontarget LC-HRMS to identify previously unknown compounds and compound classes in e-cig liquids and aerosols, which is critical for the assessment of chemical exposures resulting from vaping.

Enhanced Treatment of Municipal Wastewater Effluents by Fe-TAML/H2O2: Efficiency of Micropollutant Abatement.

Combining iron with a tetraamido-macrocyclic ligand (Fe-TAML) as a catalyst and with hydrogen peroxide (H2O2) as the bulk oxidant is a process that has been suggested for the oxidative abatement of micropollutants during water treatment. In this study, the reactivity of the Fe-TAML/H2O2 system was evaluated by investigating the degradation of a group of electron-rich organic model compounds with different functional groups in a secondary wastewater effluent. Phenolic compounds and a polyaromatic ether are quickly and substantially abated by Fe-TAML/H2O2 in a wastewater effluent. For tertiary amines, a moderate rate of abatement was observed. Primary and secondary amines, aromatic ethers, aromatic aldehydes, and olefins are oxidized too slowly in the investigated Fe-TAML/H2O2 systems to be significantly abated in a secondary wastewater effluent. Trichlorophenol is readily oxidized to chloromaleic acid and chlorofumaric acid, which support a one-electron transfer reaction as the initial step of the reaction between Fe-TAML/H2O2 and the target compound. Fe-TAML/H2O2 does not oxidize bromide to hypobromous acid; however, iodide is oxidized to hypoiodous acid, and as a consequence, the H2O2 consumption is accelerated by a catalytic reaction in iodide-containing water. Overall, Fe-TAML/H2O2 is a rather selective oxidant, which makes it an interesting system for the abatement of electron-rich phenolic-type pollutants.

Effect of Histone Lysine Methylation on DNA Lesion Reactivity in Nucleosome Core Particles.

Lysine methylation is a common post-translational histone modification that regulates transcription and gene expression. The lysine residues in the histone tail also react with damaged nucleotides in chromatin, including abasic sites and N7-methyl-2'-deoxyguanosine, the major product of DNA methylating agents. Lysine monomethylation transforms the ε-amine into a secondary amine, which could be more nucleophilic and/or basic than the ε-amine in lysine, and therefore more reactive with damaged DNA. The effect of lysine methylation on the reactivity with abasic sites and N7-methyl-2'-deoxyguanosine was examined in nucleosome core particles using a methylated lysine analogue derived from cysteine. ε-Amine methylation increases the rate constant for abasic site reaction within nucleosome core particles. Reactivity at the two positions examined increased less than twofold. Mechanistic experiments indicate that faster ß-elimination from an intermediate iminium ion accounts for accelerated abasic reactivity. The rate constants for nucleophilic attack (Schiff base/iminium ion formation) by the lysine and methylated lysine analogues are indistinguishable. Similarly, the rate constants describing nucleophilic attack by the lysine and methylated lysine analogues on ß-2'-fluoro-N7-methyl-2'-deoxyguanosine to form DNA-protein cross-links are also within experimental error of one another. These data indicate that abasic site containing DNA will be destabilized by lysine methylation. However, these experiments do not indicate that DNA-protein cross-link formation, a recently discovered form of damage resulting from N7-guanine methylation, will be affected by this post-translational modification.

What you extract is what you see: Optimising the preparation of water and wastewater samples for in vitro bioassays.

The assessment of water quality is crucial for safeguarding drinking water resources and ecosystem integrity. To this end, sample preparation and extraction is critically important, especially when investigating emerging contaminants and the toxicity of water samples. As extraction methods are rarely optimised for bioassays but rather adopted from chemical analysis, this may result in a misrepresentation of the actual toxicity. In this study, surface water, groundwater, hospital and municipal wastewater were used to characterise the impacts of common sample preparation techniques (acidification, filtration and solid phase extraction (SPE)) on the outcomes of eleven in vitro bioassays. The latter covered endocrine activity (reporter gene assays for estrogen, androgen, aryl-hydrocarbon, retinoic acid, retinoid X, vitamin D, thyroid receptor), mutagenicity (Ames fluctuation test), genotoxicity (umu test) and cytotoxicity. Water samples extracted using different SPE sorbents (Oasis HLB, Supelco ENVI-Carb+, Telos C18/ENV) at acidic and neutral pH were compared for their performance in recovering biological effects. Acidification, commonly used for stabilisation, significantly altered the endocrine activity and toxicity of most (waste)water samples. Sample filtration did not affect the majority of endpoints but in certain cases affected the (anti-)estrogenic and dioxin-like activities. SPE extracts (10.4 × final concentration), including WWTP effluents, induced significant endocrine effects that were not detected in aqueous samples (0.63 × final concentration), such as estrogenic, (anti-)androgenic and dioxin-like activities. When ranking the SPE methods using multivariate Pareto optimisation an extraction with Telos C18/ENV at pH 7 was most effective in recovering toxicity. At the same time, these extracts were highly cytotoxic masking the endpoint under investigation. Compared to that, extraction at pH 2.5 enriched less cytotoxicity. In summary, our study demonstrates that sample preparation and extraction critically affect the outcome of bioassays when assessing the toxicity of water samples. Depending on the water matrix and the bioassay, these methods need to be optimised to accurately assess water quality.

Unexpected transformation of dissolved phenols to toxic dicarbonyls by hydroxyl radicals and UV light.

Water treatment systems frequently use strong oxidants or UV light to degrade chemicals that pose human health risks. Unfortunately, these treatments can result in the unintended transformation of organic contaminants into toxic products. We report an unexpected reaction through which exposure of phenolic compounds to hydroxyl radicals (•OH) or UV light results in the formation of toxic α,ß-unsaturated enedials and oxoenals. We show that these transformation products damage proteins by reacting with lysine and cysteine moieties. We demonstrate that phenolic compounds react with •OH produced by the increasingly popular UV/hydrogen peroxide (H2O2) water treatment process or UV light to form toxic enedials and oxoenals. In addition to raising concerns about potential health risks of oxidative water treatment, our findings suggest the potential for formation of these toxic compounds in sunlit surface waters, atmospheric water, and living cells. For the latter, our findings may be particularly relevant to efforts to understand cellular damage caused by in vivo production of reactive oxygen species. In particular, we demonstrate that exposure of the amino acid tyrosine to •OH yields an electrophilic enedial product that undergoes cross-linking reaction with both lysine and cysteine residues.

Oxidation of Benzene by Persulfate in the Presence of Fe(III)- and Mn(IV)-Containing Oxides: Stoichiometric Efficiency and Transformation Products.

Sulfate radical (SO4(•-)) is a strong, short-lived oxidant that is produced when persulfate (S2O8(2-)) reacts with transition metal oxides during in situ chemical oxidation (ISCO) of contaminated groundwater. Although engineers are aware of the ability of transition metal oxides to activate persulfate, the operation of ISCO remediation systems is hampered by an inadequate understanding of the factors that control SO4(•-) production and the overall efficiency of the process. To address these shortcomings, we assessed the stoichiometric efficiency and products of transition metal-catalyzed persulfate oxidation of benzene with pure iron- and manganese-containing minerals, clays, and aquifer solids. For most metal-containing solids, the stoichiometric efficiency, as determined by the loss of benzene relative to the loss of persulfate, approached the theoretical maximum. Rates of production of SO4(•-) or hydroxyl radical (HO(•)) generated from radical chain reactions were affected by the concentration of benzene, with rates of S2O8(2-) decomposition increasing as the benzene concentration increased. Under conditions selected to minimize the loss of initial transformation products through reaction with radicals, the production of phenol only accounted for 30%-60% of the benzene lost in the presence of O2. The remaining products included a ring-cleavage product that appeared to contain an α,ß-unsaturated aldehyde functional group. In the absence of O2, the concentration of the ring-cleavage product increased relative to phenol. The formation of the ring-cleavage product warrants further studies of its toxicity and persistence in the subsurface.

Oxypurinol - A novel marker for wastewater contamination of the aquatic environment.

The anti-gout agent allopurinol is one of the most prescribed pharmaceuticals in Germany and is widely metabolized into oxypurinol (80%) as well as the corresponding riboside conjugates (10%) within the human body. To investigate the occurrence of allopurinol and oxypurinol in the urban water cycle an analytical method was developed based on solid phase extraction (SPE) and subsequent liquid chromatography electrospray-ionization tandem mass spectrometry (LC-MS/MS). In raw wastewater concentration levels of oxypurinol ranged up to 26.6 µg L(-1), whereas allopurinol was not detected at all. In wastewater treatment plant (WWTP) effluents, concentrations of allopurinol were