Gene activated scaffolds incorporating star-shaped polypeptide-pDNA nanomedicines accelerate bone tissue regeneration in vivo.

Increasingly, tissue engineering strategies such as the use of biomaterial scaffolds augmented with specific biological cues are being investigated to accelerate the regenerative process. For example, significant clinical challenges still exist in efficiently healing large bone defects which are above a critical size. Herein, we describe a cell-free, biocompatible and bioresorbable scaffold incorporating a novel star-polypeptide biomaterial as a gene vector. This gene-loaded scaffold can accelerate bone tissue repair in vivo in comparison to a scaffold alone at just four weeks post implantation in a critical sized bone defect. This is achieved via the in situ transfection of autologous host cells which migrate into the implanted collagen-based scaffold via gene-loaded, star-shaped poly(l-lysine) polypeptides (star-PLLs). In vitro, we demonstrate that star-PLL nanomaterials designed with 64 short poly(l-lysine) arms can be used to functionalise a range of collagen based scaffolds with a dual therapeutic cargo (pDual) of the bone-morphogenetic protein-2 plasmid (pBMP-2) and vascular endothelial growth factor plasmid (pVEGF). The versatility of this polymeric vector is highlighted in its ability to transfect Mesenchymal Stem Cells (MSCs) with both osteogenic and angiogenic transgenes in a 3D environment from a range of scaffolds with various macromolecular compositions. In vivo, we demonstrate that a bone-mimetic, collagen-hydroxyapatite scaffold functionalized with star-PLLs containing either 32- or 64- poly(l-lysine) arms can be used to successfully deliver this pDual cargo to autologous host cells. At the very early timepoint of just 4 weeks, we demonstrate the 64-star-PLL-pDual functionalised scaffold as a particularly efficient platform to accelerate bone tissue regeneration, with a 6-fold increase in new bone formation compared to a scaffold alone. Overall, this article describes for the first time the incorporation of novel star-polypeptide biomaterials carrying two therapeutic genes into a cell free scaffold which supports accelerated bone tissue formation in vivo.

Mechanobiology-informed regenerative medicine: Dose-controlled release of placental growth factor from a functionalized collagen-based scaffold promotes angiogenesis and accelerates bone defect healing.

Leveraging the differential response of genes to mechanical loading may allow for the identification of novel therapeutics and we have recently established placental growth factor (PGF) as a mechanically augmented gene which promotes angiogenesis at higher doses and osteogenesis at lower doses. Herein, we sought to execute a mechanobiology-informed approach to regenerative medicine by designing a functionalized scaffold for the dose-controlled delivery of PGF which we hypothesized would be capable of promoting regeneration of critically-sized bone defects. Alginate microparticles and collagen/hydroxyapatite scaffolds were shown to be effective PGF-delivery platforms, as demonstrated by their capacity to promote angiogenesis in vitro. A PGF release profile consisting of an initial burst release to promote angiogenesis followed by a lower sustained release to promote osteogenesis was achieved by incorporating PGF-loaded microparticles into a collagen/hydroxyapatite scaffold already containing directly incorporated PGF. Although this PGF-functionalized scaffold demonstrated only a modest increase in osteogenic capacity in vitro, robust bone regeneration was observed after implantation into rat calvarial defects, indicating that the dose-dependent effect of PGF can be harnessed as an alternative to multi-drug systems for the delivery of both pro-angiogenic and pro-osteogenic cues. This mechanobiology-informed approach provides a framework for strategies aimed at identifying and evaluating novel scaffold-based systems for regenerative applications.

In vitro vascularization of tissue engineered constructs by non-viral delivery of pro-angiogenic genes.

Vascularization is still one of the major challenges in tissue engineering. In the context of tissue regeneration, the formation of capillary-like structures is often triggered by the addition of growth factors which are associated with high cost, bolus release and short half-life. As an alternative to growth factors, we hypothesized that delivering genes-encoding angiogenic growth factors to cells in a scaffold microenvironment would lead to a controlled release of angiogenic proteins promoting vascularization, simultaneously offering structural support for new matrix deposition. Two non-viral vectors, chitosan (Ch) and polyethyleneimine (PEI), were tested to deliver plasmids encoding for vascular endothelial growth factor (pVEGF) and fibroblast growth factor-2 (pFGF2) to human dermal fibroblasts (hDFbs). hDFbs were successfully transfected with both Ch and PEI, without compromising the metabolic activity. Despite low transfection efficiency, superior VEGF and FGF-2 transgene expression was attained when pVEGF was delivered with PEI and when pFGF2 was delivered with Ch, impacting the formation of capillary-like structures by primary human dermal microvascular endothelial cells (hDMECs). Moreover, in a 3D microenvironment, when PEI-pVEGF and Ch-FGF2 were delivered to hDFbs, cells produced functional pro-angiogenic proteins which induced faster formation of capillary-like structures that were retained in vitro for longer time in a Matrigel assay. The dual combination of the plasmids resulted in a downregulation of the production of VEGF and an upregulation of FGF-2. The number of capillary-like segments obtained with this system was inferior to the delivery of plasmids individually but superior to what was observed with the non-transfected cells. This work confirmed that cell-laden scaffolds containing transfected cells offer a novel, selective and alternative approach to impact the vascularization during tissue regeneration. Moreover, this work provides a new platform for pathophysiology studies, models of disease, culture systems and drug screening.

Activation of the SOX-5, SOX-6, and SOX-9 Trio of Transcription Factors Using a Gene-Activated Scaffold Stimulates Mesenchymal Stromal Cell Chondrogenesis and Inhibits Endochondral Ossification.

Current treatments for articular cartilage defects relieve symptoms but often only delay cartilage degeneration. Mesenchymal stem cells (MSCs) have shown chondrogenic potential but tend to undergo endochondral ossification when implanted in vivo. Harnessing factors governing joint development to functionalize biomaterial scaffolds, termed developmental engineering, might allow to prime host MSCs to regenerate mature articular cartilage in situ without requiring cell isolation or ex vivo expansion. Therefore, the aim of this study is to develop a gene-activated scaffold capable of delivering developmental cues to host MSCs, thus priming MSCs for articular cartilage differentiation and inhibiting endochondral ossification. It is shown that delivery of the SOX-Trio induced MSCs to over-express COL2A1 and ACAN and deposit a sulfated and collagen type II rich extracellular matrix while hypertrophic gene expression and collagen type X deposition is inhibited. When cell-free SOX-Trio-activated scaffolds are implanted ectopically in vivo, they induced spontaneous chondrogenesis without evidence of hypertrophy. MSCs pre-cultured on SOX-Trio-activated scaffolds prior to implantation differentiate into phenotypically stable chondrocytes as evidenced by a lack of collagen X expression or vascular invasion. This SOX-trio-activated scaffold represents a potent, single treatment, developmentally inspired strategy to prime MSCs in situ for articular cartilage defect repair.

Rapid bone repair with the recruitment of CD206+M2-like macrophages using non-viral scaffold-mediated miR-133a inhibition of host cells.

microRNAs offer vast therapeutic potential for multiple disciplines. From a bone perspective, inhibition of miR-133a may offer potential to enhance Runx2 activity and increase bone repair. This study aims to assess the therapeutic capability of antagomiR-133a delivery from collagen-nanohydroxyapatite (coll-nHA) scaffolds following cell-free implantation in rat calvarial defects (7 mm diameter). This is, to the best of our knowledge, the first report of successful in vivo antagomiR uptake in host cells of fully immunocompetent animals without distribution to other off-target tissues. Our results demonstrate the localized release of antagomiR-133a to the implant site at 1 week post-implantation with increased calcium deposits already evident in the antagomiR-133a loaded scaffolds at this early timepoint. This was followed by an approximate 2-fold increase in bone volume versus antagomiR-free scaffolds and a significant 10-fold increase over the empty defect controls, after just 4 weeks. An increase in host CD206+ cells suggests an accelerated pro-remodeling response by M2-like macrophages accompanying bone repair with this treatment. Overall, this non-viral scaffold-mediated antagomiR-133a delivery platform demonstrates capability to accelerate bone repair in vivo - without the addition of exogenous cells - and underlines the role of M2 macrophage-like cells in directing accelerated bone repair. Expanding the repertoire of this platform to deliver alternative miRNAs offers exciting possibilities for a variety of therapeutic indications. STATEMENT OF SIGNIFICANCE: microRNAs, small non-coding RNA molecules involved in gene regulation, may have potential as a new class of bone healing therapeutics as they can enhance the regenerative capacity of bone-forming cells. We developed a collagen-nanohydroxyapatite-microRNA scaffold system to investigate whether miR133a inhibition can enhance osteogenesis in rat MSCs and ultimately accelerate endogenous bone repair by host cells in vivo without pre-seeding cells prior to implantation. Overall, this off-the-shelf, non-viral scaffold-mediated antagomiR-133a delivery platform demonstrates capability to accelerate bone repair in vivo - without the requirement of exogenous cells - and highlights the role of CD206+M2 macrophage-like cells in guiding accelerated bone repair. Translating the repertoire of this platform to deliver alternative miRNAs offers exciting possibilities for a vast myriad of therapeutic indications.

Rapid healing of a critical-sized bone defect using a collagen-hydroxyapatite scaffold to facilitate low dose, combinatorial growth factor delivery.

The healing of large, critically sized bone defects remains an unmet clinical need in modern orthopaedic medicine. The tissue engineering field is increasingly using biomaterial scaffolds as 3D templates to guide the regenerative process, which can be further augmented via the incorporation of recombinant growth factors. Typically, this necessitates supraphysiological doses of growth factor to facilitate an adequate therapeutic response. Herein, we describe a cell-free, biomaterial implant which is functionalised with a low dose, combinatorial growth factor therapy that is capable of rapidly regenerating vascularised bone tissue within a critical-sized rodent calvarial defect. Specifically, we demonstrate that the dual delivery of the growth factors bone morphogenetic protein-2 (osteogenic) and vascular endothelial growth factor (angiogenic) at a low dose (5 µg/scaffold) on an osteoconductive collagen-hydroxyapatite scaffold is highly effective in healing these critical-sized bone defects. The high affinity between the hydroxyapatite component of this biomimetic scaffold and the growth factors functions to sequester them locally at the defect site. Using this growth factor-loaded scaffold, we show complete bridging of a critical-sized calvarial defect in all specimens at a very early time point of 4 weeks, with a 28-fold increase in new bone volume and seven-fold increase in new bone area compared with a growth factor-free scaffold. Overall, this study demonstrates that a collagen-hydroxyapatite scaffold can be used to locally harness the synergistic relationship between osteogenic and angiogenic growth factors to rapidly regenerate bone tissue without the need for more complex controlled delivery vehicles or high total growth factor doses.

Highly versatile cell-penetrating peptide loaded scaffold for efficient and localised gene delivery to multiple cell types: From development to application in tissue engineering.

Gene therapy has recently come of age with seven viral vector-based therapies gaining regulatory approval in recent years. In tissue engineering, non-viral vectors are preferred over viral vectors, however, lower transfection efficiencies and difficulties with delivery remain major limitations hampering clinical translation. This study describes the development of a novel multi-domain cell-penetrating peptide, GET, designed to enhance cell interaction and intracellular translocation of nucleic acids; combined with a series of porous collagen-based scaffolds with proven regenerative potential for different indications. GET was capable of transfecting cell types from all three germ layers, including stem cells, with an efficiency comparable to Lipofectamine® 3000, without inducing cytotoxicity. When implanted in vivo, GET gene-activated scaffolds allowed for host cell infiltration, transfection localized to the implantation site and sustained, but transient, changes in gene expression - demonstrating both the efficacy and safety of the approach. Finally, GET carrying osteogenic (pBMP-2) and angiogenic (pVEGF) genes were incorporated into collagen-hydroxyapatite scaffolds and with a single 2 µg dose of therapeutic pDNA, induced complete repair of critical-sized bone defects within 4 weeks. GET represents an exciting development in gene therapy and by combining it with a scaffold-based delivery system offers tissue engineering solutions for a myriad of regenerative indications.

Scaffold-Based Delivery of Nucleic Acid Therapeutics for Enhanced Bone and Cartilage Repair.

Recent advances in tissue engineering have made progress toward the development of biomaterials capable of the delivery of growth factors, such as bone morphogenetic proteins, in order to promote enhanced tissue repair. However, controlling the release of these growth factors on demand and within the desired localized area is a significant challenge and the associated high costs and side effects of uncontrolled delivery have proven increasingly problematic in clinical orthopedics. Gene therapy may be a valuable tool to avoid the limitations of local delivery of growth factors. Following a series of setbacks in the 1990s, the field of gene therapy is now seeing improvements in safety and efficacy resulting in substantial clinical progress and a resurgence in confidence. Biomaterial scaffold-mediated gene therapy provides a template for cell infiltration and tissue formation while promoting transfection of cells to engineer therapeutic proteins in a sustained but ultimately transient fashion. Additionally, scaffold-mediated delivery of RNA-based therapeutics can silence specific genes associated with orthopedic pathological states. This review will provide an overview of the current state-of-the-art in the field of gene-activated scaffolds and their use within orthopedic tissue engineering applications. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1671-1680, 2019.

Transfection of autologous host cells in vivo using gene activated collagen scaffolds incorporating star-polypeptides.

It is increasingly being recognised within the field of tissue engineering that the regenerative capacity of biomaterial scaffolds can be augmented via the incorporation of gene therapeutics. However, the field still lacks a biocompatible gene delivery vector which is capable of functionalizing scaffolds for tailored nucleic acid delivery. Herein, we describe a versatile, collagen based, gene-activated scaffold platform which can transfect autologous host cells in vivo via incorporation of star-shaped poly(˪-lysine) polypeptides (star-PLLs) and a plasmid DNA (pDNA) cargo. Two star-PLL vectors with varying number and length of poly(˪-lysine) arms were assessed. In vitro, the functionalization of a range of collagen based scaffolds containing either glycosaminoglycans (chondroitin sulfate or hyaluronic acid) or ceramics (hydroxyapatite or nano-hydroxyapatite) with star-PLL-pDNA nanomedicines facilitated prolonged, non-toxic transgene expression by mesenchymal stem cells (MSCs). We demonstrate that the star-PLL structure confers enhanced spatiotemporal control of nanomedicine release from functionalized scaffolds over a 28-day period compared to naked pDNA. Furthermore, we identify a star-PLL composition with 64 poly(˪-lysine) arms and 5 (˪-lysine) subunits per arm as a particularly effective vector, capable of facilitating a 2-fold increase in reporter transgene expression compared to the widely used vector polyethylenimine (PEI), a 44-fold increase compared to a 32 poly(˪-lysine) armed star-PLL and a 130-fold increase compared to its linear analogue, linear poly(˪-lysine) (L-PLL) from a collagen-chondroitin sulfate gene activated scaffold. In an in vivo subcutaneous implant model, star-PLL-pDNA gene activated scaffolds which were implanted cell-free exhibited extensive infiltration of autologous host cells, nanomedicine retention within the implanted construct and successful host cell transfection at the very early time point of just seven days. Overall, this article illustrates for the first time the significant ability of the star-PLL polymeric structure to transfect autologous host cells in vivo from an implanted biomaterial scaffold thereby forming a versatile platform with potential in numerous tissue engineering applications.

In vitro efficacy of a gene-activated nerve guidance conduit incorporating non-viral PEI-pDNA nanoparticles carrying genes encoding for NGF, GDNF and c-Jun.

Despite the success of tissue engineered nerve guidance conduits (NGCs) for the treatment of small peripheral nerve injuries, autografts remain the clinical gold standard for larger injuries. The delivery of neurotrophic factors from conduits might enhance repair for more effective treatment of larger injuries but the efficacy of such systems is dependent on a safe, effective platform for controlled and localised therapeutic delivery. Gene therapy might offer an innovative approach to control the timing, release and level of neurotrophic factor production by directing cells to transiently sustain therapeutic protein production in situ. In this study, a gene-activated NGC was developed by incorporating non-viral polyethyleneimine-plasmid DNA (PEI-pDNA) nanoparticles (N/P 7 ratio, 2 µg dose) with the pDNA encoding for nerve growth factor (NGF), glial derived neurotrophic factor (GDNF) or the transcription factor c-Jun. The physicochemical properties of PEI-pDNA nanoparticles, morphology, size and charge, were shown to be suitable for gene delivery and demonstrated high Schwann cell transfection efficiency (60 ±â€¯13%) in vitro. While all three genes showed therapeutic potential in terms of enhancing neurotrophic cytokine production while promoting neurite outgrowth, delivery of the gene encoding for c-Jun showed the greatest capacity to enhance regenerative cellular processes in vitro. Ultimately, this gene-activated NGC construct was shown to be capable of transfecting both Schwann cells (S42 cells) and neuronal cells (PC12 and dorsal root ganglia) in vitro, demonstrating potential for future therapeutic applications in vivo. STATEMENT OF SIGNIFICANCE: The basic requirements of biomaterial-based nerve guidance conduits have now been well established and include being able to bridge a nerve injury to support macroscopic guidance between nerve stumps, while being strong enough to withstand longitudinal tension and circumferential compression, in addition to being mechanically sound to facilitate surgical handling and implantation. While meeting these criteria, conduits are still limited to the treatment of small defects clinically and might benefit from additional biochemical stimuli to enhance repair for the effective treatment of larger injuries. In this study, a gene activated conduit was successfully developed by incorporating non-viral nanoparticles capable of efficient Schwann cell and neuronal cell transfection with therapeutic genes in vitro, which showed potential to enhance repair in future applications particularly when taking advantage of the transcription factor c-Jun. This innovative approach may provide an alternative to conduits used as platforms for the delivery neurotrophic factors or genetically modified cells (viral gene therapy), and a potential solution for the unmet clinical need to repair large peripheral nerve injury effectively.

Delivery of the improved BMP-2-Advanced plasmid DNA within a gene-activated scaffold accelerates mesenchymal stem cell osteogenesis and critical size defect repair.

Gene-activated scaffolds have been shown to induce controlled, sustained release of functional transgene both in vitro and in vivo. Bone morphogenetic proteins (BMPs) are potent mediators of osteogenesis however we found that the delivery of plasmid BMP-2 (pBMP-2) alone was not sufficient to enhance bone formation. Therefore, the aim of this study was to assess if the use of a series of modified BMP-2 plasmids could enhance the functionality of a pBMP-2 gene-activated scaffold and ultimately improve bone regeneration when implanted into a critical sized bone defect in vivo. A multi-cistronic plasmid encoding both BMP-2 and BMP-7 (BMP-2/7) was employed as was a BMP-2-Advanced plasmid containing a highly truncated intron sequence. With both plasmids, the highly efficient cytomegalovirus (CMV) promoter sequence was used. However, as there have been reports that the elongated factor 1-α promoter is more efficient, particularly in stem cells, a BMP-2-Advanced plasmid containing the EF1α promoter was also tested. Chitosan nanoparticles (CS) were used to deliver each plasmid to MSCs and induced transient up-regulation of BMP-2 protein expression, in turn significantly enhancing MSC-mediated osteogenesis when compared to untreated controls (p < 0.001). When incorporated into a bone mimicking collagen-hydroxyapatite scaffold, the BMP-2-Advanced plasmid, under the control of the CMV promotor, induced MSCs to produce approximately 2500 µg of calcium per scaffold, significantly higher (p < 0.001) than all other groups. Just 4 weeks post-implantation in vivo, this cell-free gene-activated scaffold induced significantly more bone tissue formation compared to a pBMP-2 gene-activated scaffold (p < 0.001) as indicated by microCT and histomorphometry. Immunohistochemistry revealed that the BMP-2-Advanced plasmid accelerated differentiation of osteoprogenitor cells to mature osteoblasts, thus causing rapid healing of the bone defects. This study confirms that optimising the plasmid construct can enhance the functionality of gene-activated scaffolds and translate to accelerated bone formation in a critical sized defect.

Investigating the interplay between substrate stiffness and ligand chemistry in directing mesenchymal stem cell differentiation within 3D macro-porous substrates.

Dimensionality can have a profound impact on stiffness-mediated differentiation of mesenchymal stem cells (MSCs). However, while we have begun to understand cellular response when encapsulated within 3D substrates, the behavior of cells within macro-porous substrates is relatively underexplored. The goal of this study was to determine the influence of macro-porous topographies on stiffness-mediated differentiation of MSCs. We developed macro-porous recombinant elastin-like protein (ELP) substrates that allow independent control of mechanical properties and ligand chemistry. We then used computational modeling to probe the impact of pore topography on the mechanical stimulus that cells are exposed to within these substrates, and finally we investigated stiffness induced biases towards adipogenic and osteogenic differentiation of MSCs within macro-porous substrates. Computational modeling revealed that there is significant heterogeneity in the mechanical stimuli that cells are exposed to within porous substrates and that this heterogeneity is predominantly due to the wide range of possible cellular orientations within the pores. Surprisingly, MSCs grown within 3D porous substrates respond to increasing substrate stiffness by up-regulating both osteogenesis and adipogenesis. These results demonstrate that within porous substrates the behavior of MSCs diverges from previously observed responses to substrate stiffness, emphasizing the importance of topography as a determinant of cellular behavior.

Pro-angiogenic impact of SDF-1α gene-activated collagen-based scaffolds in stem cell driven angiogenesis.

Ensuring an adequate angiogenic response during wound healing is a prevailing clinical challenge in biomaterials science. To address this, we aimed to develop a pro-angiogenic gene-activated scaffold (GAS) that could activate MSCs to produce paracrine factors and influence angiogenesis and wound repair. A non-viral polyethyleneimine (PEI) nanoparticles carrying a gene encoding for stromal derived factor-1 alpha (SDF-1α) was combined with a collagen-chondroitin sulfate scaffold to produce the GAS. The ability of this platform to enhance the angiogenic potential of mesenchymal stem cells (MSCs) was then assessed. We found that the MSCs on GAS exhibited early over-expression of SDF-1α mRNA with the activation of angiogenic markers VEGF and CXCR4. Exposing endothelial cells to conditioned media collected from GAS supported MSCs promoted a 20% increase in viability and 33% increase in tubule formation (p < 0.05). Furthermore, the conditioned media promoted a 50% increase in endothelial cell migration and wound closure (p < 0.005). Gene expression analysis of the endothelial cells revealed that the functional response was associated with up-regulation of angiogenic genes; VEGF, CXCR4, eNOS and SDF-1α. Overall, this study shows collagen-based scaffolds combined with SDF-1α gene therapy can provide enhanced pro-angiogenic response, suggesting a promising approach to overcome poor vasculature during wound healing.

Bioinspired Star-Shaped Poly(l-lysine) Polypeptides: Efficient Polymeric Nanocarriers for the Delivery of DNA to Mesenchymal Stem Cells.

The field of tissue engineering is increasingly recognizing that gene therapy can be employed for modulating in vivo cellular response thereby guiding tissue regeneration. However, the field lacks a versatile and biocompatible gene delivery platform capable of efficiently delivering transgenes to mesenchymal stem cells (MSCs), a cell type often refractory to transfection. Herein, we describe the extensive and systematic exploration of three architectural variations of star-shaped poly(l-lysine) polypeptide (star-PLL) with varying number and length of poly(l-lysine) arms as potential nonviral gene delivery vectors for MSCs. We demonstrate that star-PLL vectors are capable of self-assembling with pDNA to form stable, cationic nanomedicines. Utilizing high content screening, live cell imaging, and mechanistic uptake studies we confirm the intracellular delivery of pDNA by star-PLLs to MSCs is a rapid process, which likely proceeds via a clathrin-independent mechanism. We identify a star-PLL composition with 64 poly(l-lysine) arms and five l-lysine subunits per arm as a particularly efficient vector that is capable of delivering both reporter genes and the therapeutic transgenes bone morphogenetic protein-2 and vascular endothelial growth factor to MSCs. This composition facilitated a 1000-fold increase in transgene expression in MSCs compared to its linear analogue, linear poly(l-lysine). Furthermore, it demonstrated comparable transgene expression to the widely used vector polyethylenimine using a lower pDNA dose with significantly less cytotoxicity. Overall, this study illustrates the ability of the star-PLL vectors to facilitate efficient, nontoxic nucleic acid delivery to MSCs thereby functioning as an innovative nanomedicine platform for tissue engineering applications.

Translating the role of osteogenic-angiogenic coupling in bone formation: Highly efficient chitosan-pDNA activated scaffolds can accelerate bone regeneration in critical-sized bone defects.

The clinical translation of bioactive scaffolds for the treatment of large segmental bone defects has remained a challenge due to safety and efficacy concerns as well as prohibitive costs. The design of an implantable, biocompatible and resorbable device, which can fill the defect space, allow for cell infiltration, differentiation and neovascularisation, while also recapitulating the natural repair process and inducing cells to lay down new bone tissue, would alleviate the problems with existing treatments. We have developed a gene-activated scaffold platform using a bone-mimicking collagen hydroxyapatite scaffold loaded with chitosan nanoparticles carrying genes encoding osteogenic (BMP-2) and angiogenic (VEGF) proteins. With a single treatment, protein expression by mesenchymal stem cells (MSCs) seeded onto the scaffold is sustained for up to 28 days and is functional in inducing MSC osteogenesis. The in vivo safety and efficacy of this gene-activated scaffold platform was demonstrated resulting in the successful transfection of host cells, abrogating the requirement for multiple procedures to isolate cells or ex vivo cell culture. Furthermore, the level of bone formation at the exceptionally early time-point of 28 days was comparable to that achieved following recombinant BMP-2 protein delivery after 8 weeks in vivo, without the adverse side effects and at a fraction of the cost. This naturally derived cell-free gene-activated scaffold thus represents a new 'off-the-shelf' product capable of accelerating bone repair in critical-sized bone defects.

Nanoparticle-mediated siRNA delivery assessed in a 3D co-culture model simulating prostate cancer bone metastasis.

siRNA has emerged as a potential therapeutic for the treatment of prostate cancer but effective delivery remains a major barrier to its clinical application. This study aimed to develop and characterise a 3D in vitro co-culture model to simulate prostate cancer bone metastasis and to assess the ability of the model to investigate nanoparticle-mediated siRNA delivery and gene knockdown. PC3 or LNCaP prostate cancer cells were co-cultured with hFOB 1.19 osteoblast cells in 2D on plastic tissue culture plates and in 3D on collagen scaffolds mimicking the bone microenvironment. To characterise the co-culture model, cell proliferation, enzyme secretion and the utility of two different gene delivery vectors to mediate siRNA uptake and gene knockdown were assessed. Cell proliferation was reduced by∼50% by day 7 in the co-culture system relative to monoculture (PC3 and LNCaP co-cultures, in 2D and 3D) and an enhanced level of MMP9 (a marker of bone metastasis) was secreted into the media (1.2-4-fold increase depending on the co-culture system). A cationic cyclodextrin gene delivery vector proved significantly less toxic in the co-culture system relative to the commercially available vector Lipofectamine 2000(®). In addition, knockdown of both the GAPDH gene (minimum 15%) and RelA subunit of the NF-κB transcription factor (minimum 20%) was achieved in 2D and 3D cell co-cultures. Results indicate that the prostate cancer-osteoblast in vitro co-culture model was more physiologically relevant vs the monoculture. This model has the potential to help improve the design and efficacy of gene delivery formulations, to more accurately predict in vivo performance and, therefore, to reduce the risk of product failure in late-stage clinical development.

Multifunctional biomaterials from the sea: Assessing the effects of chitosan incorporation into collagen scaffolds on mechanical and biological functionality.

UNLABELLED: Natural biomaterials such as collagen show promise in tissue engineering applications due to their inherent bioactivity. The main limitation of collagen is its low mechanical strength and somewhat unpredictable and rapid degradation rate; however, combining collagen with another material, such as chitosan, can reinforce the scaffold mechanically and may improve the rate of degradation. Additionally, the high cost and the risk of prion transmission associated with mammal-derived collagen has prompted research into alternative sources such as marine-origin collagen. In this context, the overall goal of this study was to determine if the incorporation of chitosan into collagen scaffolds could improve the mechanical and biological properties of the scaffold. In addition the study assessed if collagen, derived from salmon skin (marine), can provide an alternative to collagen derived from bovine tendon (mammal) for tissue engineering applications. Scaffold architecture and mechanical properties were assessed as well as their ability to support mesenchymal stem cell growth and differentiation. Overall, the addition of chitosan to bovine and salmon skin-derived collagen scaffolds improved the mechanical properties, increasing the compressive strength, swelling ratio and prolonged the degradation rate. Mesenchymal stem cell (MSC) attachment and proliferation was most improved on the bovine-derived collagen scaffold containing a 75:25 ratio of collagen:chitosan, and when MSC osteogenic and chondrogenic potential on the scaffold was assessed, a significant increase in calcium production (p<0.001) and sulfated glycosaminoglycan (sGAG) production (p<0.001) was observed respectively. Regardless of chitosan content, the bovine-derived collagen scaffolds out-performed the salmon skin-derived collagen scaffolds, displaying a larger pore size and higher percentage porosity, more regular architecture, higher compressive modulus, a greater capacity for water uptake and allowed for more MSC proliferation and differentiation. This versatile scaffold incorporating the marine biomaterial chitosan show great potential as appropriate platforms for promoting orthopaedic tissue repair while the use of salmon skin-derived collagen may be more suitable in the repair of soft tissues such as skin. STATEMENT OF SIGNIFICANCE: Collagen is commonly used in tissue engineering due to its biocompatibility; however, it has low mechanical strength and an unpredictable degradation rate. In addition, high cost and risk of prion transmission associated with mammalian-derived collagen has prompted research into alternative collagen sources, namely, marine-derived collagen. In this study, scaffolds made from salmon-skin collagen were compared to the more commonly used bovine-derived collagen with a focus on orthopaedic applications. To improve the mechanical properties of these scaffolds, another marine biomaterial, chitosan, was added to produce scaffolds with increased mechanical stability. The collagen-chitosan composites were also shown to support mesenchymal stem cell differentiation towards both bone and cartilage tissue. This multi-functional scaffold therefore has potential in both bone and cartilage regeneration applications.

Development of a gene-activated scaffold platform for tissue engineering applications using chitosan-pDNA nanoparticles on collagen-based scaffolds.

Biomaterial scaffolds that support cell infiltration and tissue formation can also function as platforms for the delivery of therapeutics such as drugs, proteins, and genes. As burst release of supraphysiological quantities of recombinant proteins can result in adverse side effects, the objective of this study was to explore the potential of a series of collagen-based scaffolds, developed in our laboratory, as gene-activated scaffold platforms with potential in a range of tissue engineering applications. The potential of chitosan, a biocompatible material derived from the shells of crustaceans, as a gene delivery vector was assessed using mesenchymal stem cells (MSCs). A transfection efficiency of >45% is reported which is similar to what is achieved with polyethyleneimine (PEI), a non-viral gold standard vector, without causing cytotoxic side effects. When the optimised chitosan nanoparticles were incorporated into a series of collagen-based scaffolds, sustained transgene expression from MSCs seeded on the scaffolds was maintained for up to 28days and interestingly the composition of the scaffold had an effect on transfection efficiency. These results demonstrate that by simply varying the scaffold composition and the gene (or combinations thereof) chosen; the system has potential for a myriad of therapeutic applications.