Synthesis, Characterization, and Reactivity of Bispidine-Iron(IV)-Tosylimido Species.

Reported are the synthesis and detailed studies of the iron(IV)-tosylimido complexes of two isomeric pentadentate bispidine ligands (bispidines are 3,7-diazabicyclo[3.3.1]nonane derivatives). This completes a series of five tosylimido complexes with comparable pentadentate amine/pyridine ligands, where the corresponding [(L)FeIV═O]2+ oxidants have been studied in detail. The characterization of the two new complexes in solution (UV-vis-NIR, Mössbauer, HR-ESI-MS) shows that these oxidants have an intermediate spin (S = 1) electronic ground state. The reactivities have been studied as oxidants in C-H activation at 1,3-cyclohexadiene and nitrogen atom transfer to thioanisole. For the latter substrate, the entire set of data for the five ligands and for both nitrogen and oxygen atom transfer is now available and the interesting observation is that oxygen atom transfer is, as expected, generally faster than nitrogen atom transfer, with the exception of the two ligands that have four and three pyridine groups oriented parallel to the Fe-O and Fe-N axes. A thorough DFT analysis indicates that this is due to steric effects in the case of the [(L)FeIV═O]2+ species, which are less important in the [(L)FeIV═NTs]2+ compounds due to partial electron transfer from the thioanisole substrate to the iron(IV)-tosylimido oxidant.

The role of agostic interaction in the mechanism of ethylene polymerisation using Cr(III) half-sandwich complexes: What dictates the reactivity?

Chromium-based catalysts play a significant role in the production of ultra-high molecular weight polyethylene, and half-sandwich functionalised-metallocene complexes were proven to be one of the most suitable candidates as catalysts for generating such large polymeric-length olefins. Earlier experimental studies on olefin polymerisation using a series of catalysts such as [L1-2CrCl2] (where L1 = 1-((pyridin-2-yl)methyl)indenyl (1) and L2 = 2-methyl-1-{[4-(yridinene-1-yl)yridine-2-yl]methyl}-1H-indenyl (2)) reveal significant variation where peripheral substitution on the ligand was found to influence the reactivity significantly. However, the specific ligand position that affects the reactivity has not been established. As these reactions are fast and robust, it is challenging to establish reactive intermediates via experiments, and therefore, mechanistic clues for such reactions are elusive. Here we have undertaken a detailed computational study by employing an array of DFT (uB3LYP-D3/def2-TZVP, CASSCF/NEVPT2, and DLPNO-CCSD(T) methods to explore the substituted and non-substituted pyridine-cyclo-pentadienyl chromium complexes and their influence on the catalytic activity in ethylene polymerisation. Our study not only unravels the catalytic pathway for olefin polymerisation for such Cr(III)-half-sandwich complexes but also reveals that the energetics of the formation of pseudo-three-coordinate alkyl intermediates is key to the variation in the reactivity observed. A detailed examination using MO and NBO analysis unveils the presence of a C-H⋯Cr agostic interaction that is found to significantly stabilise this intermediate when the pyridine ligand has strong electron-donating groups at its para position. The other substitutions, such as on the cyclopentadienyl ligand, neither yield the desired stability nor the desired interaction. Further studies on models support this proposal. In order to improve the efficiency and selectivity of catalytic systems in olefin polymerisation, we strongly advocate for the integration of agostic interactions as a crucial criterion in the design of future catalysts. Considering the prevalence of electron-deficient metal centres in successful olefin polymerisation catalysts, this research prompts a broader mechanistic inquiry to propose a unified approach for this industrially crucial reaction.

Role of molecular modelling in the development of metal-organic framework for gas adsorption applications.

More than 47,000 articles have been published in the area of Metal-Organic Framework since its seminal discovery in 1995, exemplifying the intense research carried out in this short span of time. Among other applications, gas adsorption and storage are perceived as central to the MOFs research, and more than 10,000 MOFs structures are reported to date to utilize them for various gas storage/separation applications. Molecular modeling, particularly based on density functional theory, played a key role in (i) understanding the nature of interactions between the gas and the MOFs geometry (ii) establishing various binding pockets and relative binding energies, and (iii) offering design clues to improve the gas uptake capacity of existing MOF architectures. In this review, we have looked at various MOFs that are studied thoroughly using DFT/periodic DFT (pDFT) methods for CO2, H2, O2, and CH4 gases to provide a birds-eye-view on how various exchange-correlation functionals perform in estimating the binding energy for various gases and how factors such as nature of the (i) metal ion, (ii) linkers, (iii) ligand, (iv) spin state and (v) spin-couplings play a role in this process with selected examples. While there is still room for improvement, the rewards offered by the molecular modelling of MOFs were already substantial that we advocate experimental and theoretical studies to go hand-in-hand to undercut the trial-and-error approach that is often perceived in the selection of MOFs and gas partners in this area. Graphical abstract: The importance of density functional theory-based molecular modeling studies in offering design clues to improve the gas adsorption and storage capacity of existing MOF architectures is discussed here. The use of DFT-based investigation in conjunction with experimental synthesis is an imperative tool in designing new-generation MOFs with enhanced uptake capacity.

Comparative oxidative ability of mononuclear and dinuclear high-valent iron-oxo species towards the activation of methane: does the axial/bridge atom modulate the reactivity?

Over the years, mononuclear FeIVO species have been extensively studied, but the presence of dinuclear FeIVO species in soluble methane monooxygenase (sMMO) has inspired the development of biomimic models that could activate inert substrates such as methane. There are some successful attempts; particularly the [(Por)(m-CBA) FeIV(µ-N)FeIV(O)(Por˙+)]- species has been reported to activate methane and yield decent catalytic turnover numbers and therefore regarded as the closest to the sMMO enzyme functional model, as no mononuclear FeIVO analogues could achieve this feat. In this work, we have studied a series of mono and dinuclear models using DFT and ab initio DLPNO-CCSD(T) calculations to probe the importance of nuclearity in enhancing the reactivity. We have probed the catalytic activities of four complexes: [(HO)FeIV(O)(Por)]- (1), [(HO)FeIV(O)(Por˙+)] (2), µ-oxo dinuclear iron species [(Por)(m-CBA)FeIV(µ-O)FeIV(O) (Por˙+)]- (3) and N-bridged dinuclear iron species [(Por)(m-CBA)FeIV(µ-N)FeIV(O)(Por˙+)]- (4) towards the activation of methane. Additionally, calculations were performed on the mononuclear models [(X)FeIV(O)(Por˙+)]n {X = N 4a (n = -2), NH 4b (n = -1) and NH24c (n = 0)} to understand the role of nuclearity in the reactivity. DFT calculations performed on species 1-4 suggest an interesting variation among them, with species 1-3 possessing an intermediate spin (S = 1) as a ground state and species 4 possessing a high-spin (S = 2) as a ground state. Furthermore, the two FeIV centres in species 3 and 4 are antiferromagnetically coupled, yielding a singlet state with a distinct difference in their electronic structure. On the other hand, species 2 exhibits a ferromagnetic coupling between the FeIV and the Por˙+ moiety. Our calculations suggest that the higher barriers for the C-H bond activation of methane and the rebound step for species 1 and 3 are very high in energy, rendering them unreactive towards methane, while species 2 and 4 have lower barriers, suggesting their reactivity towards methane. Studies on the system reveal that model 4a has multiple FeN bonds facilitating greater reactivity, whereas the other two models have longer Fe-N bonds and less radical character with steeper barriers. Strong electronic cooperativity is found to be facilitated by the bridging nitride atom, and this cooperativity is suppressed by substituents such as oxygen, rendering them inactive. Thus, our study unravels that apart from enhancing the nuclearity, bridging atoms that facilitate strong cooperation between the metals are required to activate very inert substrates such as methane, and our results are broadly in agreement with earlier experimental findings.

Probing the Origin of Ferro-/Antiferromagnetic Exchange Interactions in Cu(II)-4f Complexes.

The mechanistic investigations between Cu(II) and the anisotropic lanthanides (Ln(III)) are not much explored to date. This is due to the complicated energy spectrum which arises due to the orbital angular momentum of anisotropic lanthanides. Interestingly, the exchange coupling J in Ln(III)-Cu(II) systems was found to be antiferromagnetic for <4f7 metal ions and ferromagnetic for ≥4f7 metal ions, while the net magnitude of JTotal strength gradually decreases moving from f1 to f13. While this is established in several examples, the reason for this intriguing trend is not rationalized. In this article, we have taken up these challenging tasks by synthesizing a family of complexes with the general molecular formula [Cu2Ln(HL)4(NO3)](NO3)2, where Ln = La (1-La), Ce (2-Ce), Pr (3-Pr), Gd (4-Gd), Tb (5-Tb), Dy (6-Dy), and Ho (7-Ho) and HL = C15H15N1O3; (2-methoxy-6-[(E)-2'-hydroxymethyl-phenyliminomethyl]-phenolate) is a monodeprotonated tridentate Schiff base ligand. Detailed dc magnetic susceptibility measurements performed for all the complexes reveal that the Cu(II) ion is coupled ferromagnetically to the respective Ln(III) ion, which has more than seven electrons in the 4f shell, while an antiferromagnetic coupling is witnessed if Ln(III) has less than seven electrons. The strength of the exchange coupling constant was quantitatively determined for representative complexes from the high-field/high-frequency electron paramagnetic resonance spectroscopy which follows the order of 4-Gd (1.50(10) cm-1) > 5-Tb (1.18(10) cm-1) > 6-Dy (0.56(10) cm-1 based on the -2JCu-Ln(SCu1→·JLnz→+SCu2→·JLnz→) spin Hamiltonian. The increased axiality in 5-Tb and 6-Dy due to the presence of 3d ions in the near vicinity of an oblate ion and the increased exchange coupling strength between Cu(II) and Tb(III) or Dy(III) is the ideal combination to stabilize magnetic bistability in these complexes in the absence of an external magnetic field with the effective energy barrier of 15.7 K (τo = 2.49 × 10-6 s) and 12.6 K (τo = 1.70 × 10-5 s), respectively. To rationalize this experimental trend, we have performed ab initio CASSCF and DFT calculations. To compute the J values, we have employed POLY_ANISO routines and utilized the computed data to establish the generic mechanism of magnetic coupling in {Cu-Ln-Cu} motifs. These mechanistic findings reveal the importance of 5d orbitals and their energy with respect to the dx2-y2 orbital of Cu(II) ions in controlling the magnetic coupling of {Cu-4f} complexes.

Electric-Field-Induced Solid-Gas Interfacial Chemical Reaction in Carbon Nanotube Ensembles: Route toward Ultra-sensitive Gas Detectors.

The electric field at the sharp pointed tips of single wall carbon nanotube ensembles has been utilized to kinetically accelerate hitherto unobserved chemical reactions at the heterogeneous solid-gas interfaces. The principle of ″action-of-points″ drives specific chemical reactions between the defect sites of single wall carbon nanotubes (CNTs) and ppb levels of gaseous hydrogen sulfide. This is manifested as changes in the electrical conductivity of the conductive CNT-ensemble (cCNT) and visually tracked as enthalpic modulations at the site of the reaction through infrared thermometry. Importantly, the principle has been observed for a variety of analytes such as NH3, H2O, and H2S, leading to distinctly correlatable changes in reactivity and conductivity changes. Theoretical calculations based on the density functional theory in the presence and absence of applied electric field reveal that the applied electric field activates the H2S gas molecules by charge polarization, yielding favorable energetics. These results imply the possibility of carrying out site-specific chemical modifications for nanomaterials and also provide transformative opportunities for the development of miniaturized e-nose-based gas analyzers.

Deciphering the Role of Symmetry and Ligand Field in Designing Three-Coordinate Uranium and Plutonium Single-Molecule Magnets.

Actinide single-molecule magnets (SMMs) have gained paramount interest in molecular magnetism as they offer a larger barrier height of magnetization (Ueff) reversal compared to the lanthanide analogue, thanks to their greater metal-ligand covalency. However, the reported actinide SMMs to date yield a relatively smaller Ueff as there is no established design principle to enhance Ueff values. To address this issue, we have employed ab initio CASSCF/CASPT2/NEVPT2 calculations to study a series of three-coordinate U3+ and Pu3+ SMMs. To begin with, we have studied two experimentally characterized U3+ ion-field-induced SMMs, namely, planar [U{N(SiMe2tBu)2}3] (1) and pyramidal [U{N(SiMe3)2}3] (2) complexes reported earlier. Both the complexes were found to stabilize mJ = |±1/2⟩ as the ground state with a very strong quantum tunneling of magnetization (QTM), rendering them unsuitable for SMMs. Our calculations reveal that in the pyramidal geometry (such as in 2), the energy of the 5f26d1 state is lowered compared to the planar geometry (as in 1), resulting in a slightly better SMM characteristic in the former. To unravel the effect of symmetry in magnetic properties, ab initio calculations were performed on two reported T-shaped complexes [U(NSiiPr2)2(I)] (3) and [U(NHAriPr6)2I] (4, AriPr6 = 2,6-(2,4,6-iPr3C6H2)2C6H3). Quite interestingly, mJ = |±9/2⟩ is found to be the ground state for both the complexes with a blocking barrier exceeding 900 cm-1. Furthermore, to decipher the effect of the transuranic element in magnetic anisotropy, ab initio calculations were extended to the Pu analogue of 2, [Pu{N(SiMe3)2}3] (5), which yields a record-breaking blocking barrier of ∼1933 cm-1. Among the three-coordinate geometries studied, the pyramidal geometry was found to offer substantial magnetic anisotropy for Pu3+ ions, while a T-shaped geometry is best suited for U3+ ions. While the chosen theoretical protocols' overestimation of barrier height cannot be avoided, these values are still several orders of magnitude larger than the Ueff values reported for any actinide SMMs and unveil a design principle for superior three-coordinate actinide-based SMMs.

Synergistic Experimental and Theoretical Studies of Luminescent-Magnetic Ln2Zn6 Clusters.

The present work is part of our ongoing quest for developing functional inorganic complexes using unorthodox pyridyl-pyrazolyl-based ligands. Accordingly, we report herein the synthesis, characterization, and luminescence and magnetic properties of four 3d-4f mixed-metal complexes with a general core of Ln2Zn6 (Ln = Dy, Gd, Tb, and Eu). In stark contrast to the popular wisdom of using a compartmental ligand with separate islands of hard and soft coordinating sites for selective coordination, we have vindicated our approach of using a ligand with overcrowded N-coordinating sites that show equal efficiency with both 4f and 3d metals toward multinuclear cage-cluster formation. The encouraging red and green photolumiscent features of noncytotoxic Eu2Zn6 and Tb2Zn6 complexes along with their existence in nanoscale dimension have been exploited with live-cell confocal microscopy imaging of human breast adenocarcinoma (MCF7) cells. The magnetic features of the Dy2Zn6 complex confirm the single-molecule-magnet behavior with befitting frequency- and temperature-dependent out-of-phase signals along with an Ueff value of ∼5 K and a relaxation time of 8.52 × 10-6 s. The Gd2Zn6 complex, on the other hand, shows cryogenic magnetic refrigeration with an entropy change of 11.25 J kg-1 K-1 at a magnetic field of 7 T and at 2 K. Another important aspect of this work reflects the excellent agreement between the experimental results and theoretical calculations. The theoretical studies carried out using the broken-symmetry density functional theory, ORCA suite of programs, and MOLCAS calculations using the complete-active-space self-consistent-field method show an excellent synergism with the experimentally measured magnetic and spectroscopic data.

Arjunetin as a promising drug candidate against SARS-CoV-2: molecular dynamics simulation studies.

Stem and bark of the tree Terminalia arjuna Wight & Arn. (Combretaceae) has been documented to exhibit therapeutic properties like cardiotonic, anticancer, antiviral, antibacterial, antifungal, hypercholesterolemia, hypolipidemic, and anti-coagulant. Our previous studies have shown that, ethanolic extract of T. arjuna bark exhibits radical scavenging anti-oxidant activity and also effectively inhibited catalase activity. In this study, oleanane triterpenoids type compounds viz., oleanolic acid, arjunolic acid, arjunolitin, arjunetin were isolated from ethanolic bark extract as bio-active compound and their structures were elucidated using 1H, 13C NMR, HR-ESIMS, IR. Of the various compounds, Arjunetin showed significant inhibition of catalase activity as compared to the other compounds. Based on the structural similarity between arjunetin and current antiviral drugs, we propose that arjunetin might exhibit antiviral activity. Molecular docking and molecular dynamics studies showed that arjunetin binds to the binds to key targets of SARS-CoV-2 namely, 3CLpro, PLpro, and RdRp) with a higher binding energy values (3CLpro, -8.4 kcal/mol; PLpro, -7.6 kcal/mol and RdRp, -8.1 kcal/mol) as compared with FDA approved protease inhibitor drugs to Lopinavir (3CLpro, -7.2 kcal/mole and PLpro -7.7 kcal/mole) and Remdesivir (RdRp -7.6 kcal/mole). To further investigate this, we performed 200-500 ns molecular dynamics simulation studies. The results transpired that the binding affinity of Arjunetin is higher than Remdesivir in the RNA binding cavity of RdRp. Based on structural similarity between arjunetin and Saikosaponin (a known antiviral agents) and based on our molecular docking and molecular dynamic simulation studies, we propose that arjunetin can be a promising drug candidate against Covid-19.Communicated by Ramaswamy H. Sarma.

Effect of the Ligand Backbone on the Reactivity and Mechanistic Paradigm of Non-Heme Iron(IV)-Oxo during Olefin Epoxidation.

The oxygen atom transfer (OAT) reactivity of the non-heme [FeIV (2PyN2Q)(O)]2+ (2) containing the sterically bulky quinoline-pyridine pentadentate ligand (2PyN2Q) has been thoroughly studied with different olefins. The ferryl-oxo complex 2 shows excellent OAT reactivity during epoxidations. The steric encumbrance and electronic effect of the ligand influence the mechanistic shuttle between OAT pathway I and isomerization pathway II (during the reaction stereo pure olefins), resulting in a mixture of cis-trans epoxide products. In contrast, the sterically less hindered and electronically different [FeIV (N4Py)(O)]2+ (1) provides only cis-stilbene epoxide. A Hammett study suggests the role of dominant inductive electronic along with minor resonance effect during electron transfer from olefin to 2 in the rate-limiting step. Additionally, a computational study supports the involvement of stepwise pathways during olefin epoxidation. The ferryl bend due to the bulkier ligand incorporation leads to destabilization of both dz2 and dx2-y2 orbitals, leading to a very small quintet-triplet gap and enhanced reactivity for 2 compared to 1. Thus, the present study unveils the role of steric and electronic effects of the ligand towards mechanistic modification during olefin epoxidation.

Spin state and reactivity of iron(iv)oxido complexes with tetradentate bispidine ligands.

The iron(iv)oxido complex [(bispidine)FeIV[double bond, length as m-dash]O(Cl)]+ is shown by experiment and high-level DLPNO-CCSD(T) quantum-chemical calculations to be an extremely short-lived and very reactive intermediate-spin (S = 1) species. At temperatures as low as -90 °C, it decays with a half-life of approx. two minutes, and this is the reason why, so far, it remained undetected and why it is extremely difficult to trap and fully characterize this interesting and extremely efficient oxidant. The large difference in reactivity between [(bispidine)FeIV[double bond, length as m-dash]O(Cl)]+ and [(bispidine)FeIV[double bond, length as m-dash]O(MeCN)]2+ (at least two orders of magnitude), while both oxido-iron(iv) complexes have very similar structures and an S = 1 electronic ground state, is presumably due to the large difference in the energy gap between the triplet and quintet electronic states. In presence of cyclohexane as substrate, [(bispidine)FeIV[double bond, length as m-dash]O(Cl)]+ oxidizes cyclohexane with a rate that is approx. 25 times faster than the self-decay of the oxidant, and selectively leads to chlorocyclohexane in moderate yield. The S = 1 electronic ground state of [(bispidine)FeIV[double bond, length as m-dash]O(Cl)]+ and a relatively low gap to the S = 2 state (approx. 6 kJ mol-1vs. approx. 75 kJ mol-1 for [(bispidine)FeIV[double bond, length as m-dash]O(MeCN)]2+) is also predicted by DLPNO-CCSD(T) quantum-chemical calculations. The method used was benchmarked with a set of six ferryl complexes with experimentally known electronic ground states.

Selective C-H halogenation over hydroxylation by non-heme iron(iv)-oxo.

Non-heme iron based halogenase enzymes promote selective halogenation of the sp3-C-H bond through iron(iv)-oxo-halide active species. During halogenation, competitive hydroxylation can be prevented completely in enzymatic systems. However, synthetic iron(iv)-oxo-halide intermediates often result in a mixture of halogenation and hydroxylation products. In this report, we have developed a new synthetic strategy by employing non-heme iron based complexes for selective sp3-C-H halogenation by overriding hydroxylation. A room temperature stable, iron(iv)-oxo complex, [Fe(2PyN2Q)(O)]2+ was directed for hydrogen atom abstraction (HAA) from aliphatic substrates and the iron(ii)-halide [FeII(2PyN2Q)(X)]+ (X, halogen) was exploited in conjunction to deliver the halogen atom to the ensuing carbon centered radical. Despite iron(iv)-oxo being an effective promoter of hydroxylation of aliphatic substrates, the perfect interplay of HAA and halogen atom transfer in this work leads to the halogenation product selectively by diverting the hydroxylation pathway. Experimental studies outline the mechanistic details of the iron(iv)-oxo mediated halogenation reactions. A kinetic isotope study between PhCH3 and C6D5CD3 showed a value of 13.5 that supports the initial HAA step as the RDS during halogenation. Successful implementation of this new strategy led to the establishment of a functional mimic of non-heme halogenase enzymes with an excellent selectivity for halogenation over hydroxylation. Detailed theoretical studies based on density functional methods reveal how the small difference in the ligand design leads to a large difference in the electronic structure of the [Fe(2PyN2Q)(O)]2+ species. Both experimental and computational studies suggest that the halide rebound process of the cage escaped radical with iron(iii)-halide is energetically favorable compared to iron(iii)-hydroxide and it brings in selective formation of halogenation products over hydroxylation.

Nucleophilic versus Electrophilic Reactivity of Bioinspired Superoxido Nickel(II) Complexes.

The formation and detailed spectroscopic characterization of the first biuret-containing monoanionic superoxido-NiII intermediate [LNiO2 ]- as the Li salt [2; L=MeN[C(=O)NAr)2 ; Ar=2,6-iPr2 C6 H3 )] is reported. It results from oxidation of the corresponding [Li(thf)3 ]2 [LNiII Br2 ] complex M with excess H2 O2 in the presence of Et3 N. The [LNiO2 ]- core of 2 shows an unprecedented nucleophilic reactivity in the oxidative deformylation of aldehydes, in stark contrast to the electrophilic character of the previously reported neutral Nacnac-containing superoxido-NiII complex 1, [L'NiO2 ] (L'=CH(CMeNAr)2 ). According to density-functional theory (DFT) calculations, the remarkably different behaviour of 1 versus 2 can be attributed to their different charges and a two-state reactivity, in which a doublet ground state and a nearby spin-polarized doublet excited-state both contribute in 1 but not in 2. The unexpected nucleophilicity of the superoxido-NiII core of 2 suggests that such a reactivity may also play a role in catalytic cycles of Ni-containing oxygenases and oxidases.

Axial vs. Equatorial Ligand Rivalry in Controlling the Reactivity of Iron(IV)-Oxo Species: Single-State vs. Two-State Reactivity.

High-valent iron-oxo species are known for their very high reactivity, and this aspect has been studied in detail over the years. The role of axial ligands in fine-tuning the reactivity of the iron(IV)-oxo species has been particularly well studied. The corresponding role of equatorial ligands, however, has rarely been explored, and is of prime importance in the development of non-heme chemistry. Here, we have undertaken detailed DFT calculations on [(LNHC )FeIV (O)(CH3 CN)]2+ (1; LNHC =3,9,14,20-tetraaza1,6,12,17-tetraazoniapenta-cyclohexacosane-1(23),4,6(26),10,12(25),15,17(24),21-octaene) in comparison to compound II of cytochrome P450 [(porphyrin)FeIV (O)(SH)]- (2) to probe this aspect. The electronic structures of 1 and 2 are found to vary significantly, implying a large variation in their reactivities. In particular, the strong equatorial ligand present in 1 significantly destabilizes the quintet states as compared to species 2. To fully understand the reactivity pattern of these species, we have modelled the hydroxylation of methane by both 1 and 2. Our calculations reveal that 1 reacts via a low-lying S=1 π pathway, and that the generally available S=2 σ pathway is not energetically accessible. In addition to having a significant barrier for C-H bond activation, the -OH rebound step is also computed to have a large barrier height, leading to a marked difference in reactivity between these two species. Of particular relevance here is the observation of pure triplet-state reactivity for 1. We have also attempted to test the role of axial ligands in fine-tuning the reactivity of 1, and our results demonstrate that, in contrast to heme systems, the axial ligands in 1 do not significantly influence the reactivity. This highlights the importance of designing equatorial ligands to fine-tune reactivity of high-valent iron(IV)-oxo species.

Computational Insight Into the Hydroamination of an Activated Olefin, As Catalyzed by a 1,2,4-Triazole-Derived Nickel(II) N-Heterocyclic Carbene Complex.

A density functional theory (DFT) investigation performed at the B3LYP/TZVP//B3LYP/6-31G(d)-LANL2DZ level of theory on the hydroamination of dimethylamine (Me2NH) on an activated olefin (namely, acrylonitrile (CH2═CHCN)), as catalyzed by a 1,2,4-triazol based nickel(II) N-heterocyclic carbene complex (namely, [1,4-dimethyl-1,2,4-triazole-5-ylidene]2 nickel dichloride) revealed that the olefin coordination pathway is favorable over the amine coordination pathway, although the initial olefin coordination step is higher in energy than the initial amine coordination step. Significantly enough, the reaction involved a crucial 1,3-proton transfer step between the resonance intermediates, i.e., the C-bound [(NHC)2Ni(CH(CN)CH2NHMe2)]+ (D) species or N-bound [(NHC)2Ni(NCCHCH2NHMe2)]+ (E) species and the intermediate [(NHC)2Ni(NCCH2CH2NMe2)]+ (F), depicting the cleavage of a N-H bond and the formation of a C-H bond facilitated by a water-assisted/amine-assisted proton shuttle. Overall, among the various pathways explored, the lowest energy pathway involved alkene coordination, followed by an amine-assisted 1,3-proton transfer step.

Neutral diiron(III) complexes with Fe2(µ-E)2 (E = O, S, Se) core structures: reactivity of an iron(I) dimer towards chalcogens.

Three neutral bis(µ-chalcogenido)diiron(III) complexes, [{(N,N'-Pipiso)Fe(µ-E)}2] (Pipiso(-) = [(DipN)2C(cis-2,6-Me2NC5H8)](-), (Dip = C6H3Pr(I)2-2,6; E = O, S or Se) have been prepared by reactions of the iron(I) dimer [{(µ-N,N'-Pipiso)Fe}2] with O2, S8 or Se∞. Treating the µ-selenido compound [{(N,N'-Pipiso)Fe(µ-Se)}2] with O2 cleanly generated its µ-oxo counterpart, [{(N,N'-Pipiso)Fe(µ-O)}2]. X-ray crystallographic analyses of the compounds showed them to possess Fe2(µ-E)2 core structures with distorted square planar (E = O) or tetrahedral (E = S or Se) iron coordination geometries. Magnetic, (57)Fe Mössbauer spectroscopic and computational studies indicate medium to strong antiferromagnetic coupling between the two high-spin Fe(III) ions in all three compounds.

Crown-linked dipyridylamino-triazine ligands and their spin-crossover iron(II) derivatives: magnetism, photomagnetism and cooperativity.

The syntheses, crystallography and magnetic properties of a series of compounds of formula trans-[Fe(II)(L(1))2(NCX)2] (X = S, Se, BH3 (1-3)), cis-[Fe(II)(L(2))(NCX)2]·CH2Cl2 (X = S, Se, BH3 (4-6)) and trans-[Fe(II)(L(3))(NCX)2]n (X = S, Se (7-8)) are described (L(1) = 6-chloro-N(2),N(2)-diethyl-N(4),N(4)-di(pyridin-2-yl)-1,3,5-triazine-2,4-diamine, L(2) = 6,6'-(1,4,10,13-tetraoxa-7,16-diazacyclooctadecane-7,16-diyl)bis(N(2),N(2)-diethyl-N(4),N(4)-di(pyridin-2-yl)-1,3,5-triazine-2,4-diamine, L(3) = 6,6'-(1,4,10,13-tetraoxa-7,16-diazacyclooctadecane-7,16-diyl)bis(N(2),N(2),N(4),N(4)-tetra(pyridin-2-yl)-1,3,5-triazine-2,4-diamine)). The magnetostructural properties of 1-8 have been probed in detail by variable temperature magnetic measurements and crystallographic methods. 1-6 display mononuclear structures while 7 and 8 form 1-D chain structures. Complexes 4-6 have the potential to form 1D-chains via L(2) bridging, but instead form mononuclear complexes. Magnetic studies show that complexes 1, 2, and 4 remain in the high-spin (HS) state at all temperatures. An aged, dry, powdered sample of 3 gives an abrupt HS to LS transition (T1/2 = 200 K), while a freshly prepared, powdered sample of 3·1.5H2O displays thermal hysteresis (Δ = 7 K). Complexes 5, 6 and 7 undergo a gradual spin transition with T1/2 values of 100 K, 150 K and 130 K, respectively. Cooperativity parameters are compared, with 3 showing cooperativity (positive C) and 5 and 6 showing anticooperativity. Photomagnetic LIESST (light induced excited spin state trapping) studies were performed on complexes 5 and 6 and reveal T(LIESST) values lower than 60 K. An attempt has been made to understand the electronic structure of complex 3 and its cooperativity behaviour using density functional methods, the calculations reproducing the sign and, in part, the magnitude of the cooperativity.

Mechanistic insights on the ortho-hydroxylation of aromatic compounds by non-heme iron complex: a computational case study on the comparative oxidative ability of ferric-hydroperoxo and high-valent Fe(IV)═O and Fe(V)═O intermediates.

ortho-Hydroxylation of aromatic compounds by non-heme Fe complexes has been extensively studied in recent years by several research groups. The nature of the proposed oxidant varies from Fe(III)-OOH to high-valent Fe(IV)═O and Fe(V)═O species, and no definitive consensus has emerged. In this comprehensive study, we have investigated the ortho-hydroxylation of aromatic compounds by an iron complex using hybrid density functional theory incorporating dispersion effects. Three different oxidants, Fe(III)-OOH, Fe(IV)═O, and Fe(V)═O, and two different pathways, H-abstraction and electrophilic attack, have been considered to test the oxidative ability of different oxidants and to underpin the exact mechanism of this regiospecific reaction. By mapping the potential energy surface of each oxidant, our calculations categorize Fe(III)-OOH as a sluggish oxidant, as both proximal and distal oxygen atoms of this species have prohibitively high barriers to carry out the aromatic hydroxylation. This is in agreement to the experimental observation where Fe(III)-OOH is found not to directly attack the aromatic ring. A novel mechanism for the explicit generation of non-heme Fe(IV)═O and Fe(V)═O from isomeric forms of Fe(III)-OOH has been proposed where the O···O bond is found to cleave via homolytic (Fe(IV)═O) or heterolytic (Fe(V)═O) fashion exclusively. Apart from having favorable formation energies, the Fe(V)═O species also has a lower barrier height compared to the corresponding Fe(IV)═O species for the aromatic ortho-hydroxylation reaction. The transient Fe(V)═O prefers electrophilic attack on the benzene ring rather than the usual aromatic C-H activation step. A large thermodynamic drive for the formation of a radical intermediate is encountered in the mechanistic scene, and this intermediate substantially diminishes the energy barrier required for C-H activation by the Fe(V)═O species. Further spin density distribution and the frontier orbitals of the computed species suggest that the Fe(IV)═O species has a substantial barrier height for this reaction, as the substrate is coordinated to the metal atoms. This coordination restricts the C-H activation step by Fe(IV)═O species to proceed via the π-type pathway, and thus the usual energy lowering due to the low-lying quintet state is not observed here.

Decisive interactions that determine ferro/antiferromagnetic coupling in {3d-4f} pairs: a case study on dinuclear {V(IV)-Gd(III)} complexes.

The emerging class of mixed transition metal and lanthanide {3d-4f} complexes have gained more interest in recent years in the field of molecular magnetism. The key to success in this class of compounds lies in the nature of their observed magnetic coupling, which is mostly ferromagnetic. However several exceptions have emerged in recent years which makes understanding the origin of magnetic coupling crucial. DFT and CASSCF calculations have been performed on a structurally similar pair of {V(iv)-Gd(iii)} complexes to underpin the dilemma of ferro/antiferromagnetic exchange interaction. We have chosen two structurally similar complexes, [L(1)V(O)Gd(H(2)O)(NO(3))(3)] (1); which displays a ferromagnetic interaction (J = +1.5 cm(-1)) between the {V(iv)-Gd(iii)} pair, while complex [L(2)V(O){(CH(3))(2)CO}Gd(NO(3))(3)], (2) (see text for descriptions of L(1) and L(2)) exhibits an antiferromagnetic exchange (J = -2.6 cm(-1)). The DFT calculations yield J values of +2.0 cm(-1) and -0.7 cm(-1) for complexes 1 and 2 respectively and these values are in good agreement with the experimental values. CASSCF calculations have also been performed to understand the nature of the interaction in these complexes. The MO and NBO analysis demonstrate the importance of Gd(iii) vacant 5d orbitals which contribute to the ferromagnetic part of the J values in this class of complexes. The extensive magneto-structural correlations developed suggests that a combination of two parameters, the V-O-Gd angle and the V-O-Gd-O dihedral angle, control the sign as well the magnitude of the J values. We have extended our studies to a tetranuclear [L(3)V(O)Gd(hfac)(2)(CH(3)OH)(2)](2) complex to validate the proposed mechanism and the developed correlation. Our calculations also reveal that weak interactions are playing an important role in predicting the ground state for large polynuclear complexes.

Epoxidation and 1,2-dihydroxylation of alkenes by a nonheme iron model system - DFT supports the mechanism proposed by experiment.

The FeII complexes of two isomeric pentadentate bispidine ligands in the presence of H2O2 are catalytically active for the epoxidation and 1,2-dihydroxylation of cyclooctene (bispidine = 3,7-diazabicyclo[3.3.1]nonane; the two isomeric pentadentate bispidine ligands discussed here have two tertiary amine and three pyridine donors). The published spectroscopic and mechanistic data, which include an extensive set of 18O labeling experiments, suggest that the FeIV=O complex is the catalytically active species, which produces epoxide as well as cis- and trans-1,2-dihydroxylated products. Several observations from the published experimental study are addressed with hybrid density functional methods and, in general, the calculations support the proposed, for nonheme iron model systems novel mechanism, where the formation of a radical intermediate emerges from the reaction of the FeIV=O oxidant and cyclooctene. The calculations suggest that the S = 1 ground state of the FeIV=O complex reacts with cyclooctene in a stepwise reaction, leading to the formation of a carbon-based radical intermediate. This radical is captured by O2 from air to produce the majority of the epoxide products in an aerobic atmosphere. Under anaerobic conditions, the produced epoxide product is due to the cyclization of the radical intermediate. Several possible spin states (ST = 3, 2, 1, 0) of the radical intermediate are close in energy. As a result of the substantial energy barrier, calculated for the ST = 3 spin ground state, a spin-crossover during the cyclization step is assumed, and a possible two-state scenario is found, where the S = 2 state of the FeIV=O complex participates in the catalytic mechanism. The 1,2-dihydroxylation proceeds, as suggested by experiment, via an unprecedented pathway, where the radical intermediate is captured by a hydroxyl radical, the source of which is FeIII-OOH, and this reaction is barrierless. The calculations suggest that dihydroxylation can also occur by a direct oxidation pathway from FeIII-OOH. The strikingly different reactivities observed with the two isomeric bispidine FeII complexes are rationalized on the basis of structural and electronic differences.