Local Insulin Improves Wound Healing: A Systematic Review and Bayesian Network Meta-Analysis.

BACKGROUND: Wounds are a significant health issue, and reliable and safe strategies to promote repair are needed. Clinical trials have demonstrated that local insulin promotes healing in acute and chronic wounds (ie, reductions of 7% to 40% versus placebo). However, the trials' sample sizes have prevented drawing solid conclusions. Furthermore, no analysis has focused on safety concerns (ie, hypoglycemia). Under the hypothesis that local insulin promotes healing through proangiogenic effects and cellular recruitment, the aim of this systematic review and network meta-analysis (NMA) was to assess its safety and relative effectiveness using a Bayesian approach. METHODS: Medline, CENTRAL, Embase, Scopus, LILACS, and gray literature sources were searched for human studies assessing the local use of insulin versus any comparator since inception to October of 2020. Data on glucose changes and adverse events, wound and treatment characteristics, and healing outcomes were extracted, and an NMA was conducted. RESULTS: A total of 949 reports were found, of which 23 ( n = 1240 patients) were included in the NMA. The studies evaluated six different therapies, and most comparisons were against placebo. NMA showed -1.8 mg/dL blood glucose level change with insulin and a lack of reported adverse events. Statistically significant clinical outcomes identified include reduction in wound size (-27%), increased healing rate (23 mm/day), reduction in Pressure Ulcer Scale for Healing scores (-2.7), -10 days to attain complete closure, and an odds ratio of 20 for complete wound closure with insulin use. Likewise, significantly increased neoangiogenesis (+30 vessels/mm 2 ) and granulation tissue (+25%) were also found. CONCLUSION: Local insulin promotes wound healing without significant adverse events.

Relation between mismatch repair status, chemoresponse, survival and anatomic location in gastroesophageal adenocarcinoma.

BACKGROUND: It has recently been reported that mismatch repair (MMR) status and microsatellite instability (MSI) status in gastroesophageal carcinomas predict surgical, chemotherapeutic and immunotherapeutic outcomes; however, there is extensive variability in the reported incidence and clinical implications of MMR/MSI status in gastroesophaegal adenocarcinomas. We characterized a Canadian surgical patient cohort with respect to MMR status, clinicopathologic correlates and anatomic tumour location. METHODS: We investigated MMR and BRAF V600E status of gastroesophaegal adenocarcinomas in patients who underwent gastrectomy or esophagectomy with extended (D2) lymphadenectomy at a single centre between 2011 and 2019. We correlated patterns of MMR expression in the overall cohort and in anatomic location-defined subgroups with treatment response and overall survival using multivariate analysis. RESULTS: In all, 226 cases of gastroesophaegal adenocarcinoma (63 esophageal, 98 gastroesophageal junctional and 65 gastric) were included. The MMR-deficient (dMMR) immunophenotype was found in 28 tumours (12.3%) (15 junctional [15.3%], 13 gastric [20.0%] and none of the esophageal). The majority (25 [89%]) of dMMR cases showed MLH1/PMS2 loss without concurrent BRAF V600E mutation. Two MSH2/ MSH6-deficient gastric tumours and 1 MSH6-deficient junctional tumour were detected. The pathologic response to preoperative chemotherapy was comparable in the dMMR and MMR-proficient (pMMR) cohorts. However, dMMR status was associated with significantly longer median overall survival than pMMR status (5.8 yr v. 2.4 yr, hazard ratio [HR] 1.91, 95% confidence interval [CI] 1.06-3.46), particularly in junctional tumours (4.6 yr v. 1.9 yr, HR 2.97, 95% CI 1.27-6.94). CONCLUSION: Our study shows that MMR status has at least prognostic value, which supports the need for biomarker testing in gastroesophageal adenocarcinomas, including junctional adenocarcinomas. This highlights the clinical significance of determining the MMR status in all adenocarcinomas of the upper gastrointestinal tract. Response to induction chemotherapy, however, was not influenced by MMR status.

Capsular Repair Counteracts the Risk of Dislocation in Hemiarthroplasty Conversion to Total Hip Arthroplasty.

This study investigated whether decreasing the femoral head size, in addition to performing a posterior capsular closure and short external rotator repair, influences the historical rate of dislocation after conversion of a failed hemiarthroplasty (HA) to a total hip arthroplasty (THA) through a posterior approach. We reviewed 15 patients from our prospective arthroplasty database who underwent a conversion from an HA to a THA with closure of the posterior capsule, had downsizing of the femoral head, and had at least a 2-year follow-up. Patients were clinically observed to determine whether their hip dislocated postoperatively or required re-revision. Radiographs were evaluated to assess for known risk factors for dislocation, including component position and restoration of hip biomechanics. The femoral head size was downsized from a mean of 45 mm (range, 42-57 mm) preoperatively to a mean of 32 mm (range, 28-36 mm) postoperatively (P<.001). Femoral heads sized 36, 32, and 28 mm were used in the revision of 4, 5, and 6 hips, respectively. At the mean 84-month follow-up (range, 24-156 months), there were no dislocations. Attention to surgical technique and closing the posterior capsule can decrease the historically high dislocation rate associated with converting an HA to a total hip replacement using the posterolateral approach. Despite substantial reduction in size of the prosthetic femoral head, there were no postoperative dislocations with closure of the posterior capsule. Downsizing the femoral head during revision THA should be avoided; however, if not feasible, closure of the posterior capsule can offset the otherwise increased risk of dislocation. [Orthopedics. 2023;46(3):175-179.].

Infrared Thermography in Wound Care, Surgery, and Sports Medicine: A Review.

For many years, the role of thermometry was limited to systemic (core body temperature) measurements (e.g., pulmonary catheter) or its approximation using skin/mucosa (e.g., axillary, oral, or rectal) temperature measurements. With recent advances in material science and technology, thermal measurements went beyond core body temperature measurements and found their way in many medical specialties. The article consists of two primary parts. In the first part we overviewed current clinical thermal measurement technologies across two dimensions: (a) direct vs. indirect and (b) single-point vs. multiple-point temperature measurements. In the second part, we focus primarily on clinical applications in wound care, surgery, and sports medicine. The primary focus here is the thermographic imaging modality. However, other thermal modalities are included where relevant for these clinical applications. The literature review identified two primary use scenarios for thermographic imaging: inflammation-based and perfusion-based. These scenarios rely on local (topical) temperature measurements, which are different from systemic (core body temperature) measurements. Quantifying these types of diseases benefits from thermographic imaging of an area in contrast to single-point measurements. The wide adoption of the technology would be accelerated by larger studies supporting the clinical utility of thermography.

Synchronous Esophageal and Lung Cancers-Is Combined Anatomic Resection Appropriate?

BACKGROUND: This study evaluated the safety and feasibility of combined resection for patients with synchronous pulmonary and esophageal cancer. METHODS: Patients undergoing esophagectomy between 1997 and 2019 were identified from prospectively collected databases at 3 tertiary referral centers, and those with combined anatomic lung resection at the same setting were matched in a 1:3 ratio to esophagectomy-alone patients, based on age, sex, pathologic stage, neoadjuvant therapy, and surgical procedure. Demographic data, perioperative data, and postoperative complications were compared. Statistical analysis included the unpaired t test, Fisher exact, or χ2 test and Gehan-Breslow analysis. RESULTS: Of 4729 esophagectomies, combined anatomic lung resection was performed in 18 patients with discrete pulmonary lesions. Matching yielded 49 patients who underwent esophagectomy only and were statistically similar compared with patients undergoing combined resections. Ivor Lewis esophagectomy and lobectomy were the most frequent procedures. Combined resections did not have a higher overall complication rate than esophagectomy alone; rather, these patients had fewer overall complications (56% vs 84%; P = .02). Specifically, there were no differences in anastomotic leak (17% vs 18%) or pulmonary complications (39% vs 33%) between combined resection and esophagectomy alone. No postoperative mortality were identified, and median overall survival was 4.1 years vs 6.5 years (P = .10). CONCLUSIONS: Patients with synchronous localized lung and esophageal cancer, although rare, should not be biased toward nonsurgical therapy, because the morbidity associated with combined esophagectomy and anatomic lung resection does not differ significantly from esophagectomy alone in this highly selected group of patients.

Validation of the Simplified Inguinal Pain Questionnaire for assessing postoperative pain and disability following hernioplasty.

The purpose of this study was to assess the psychometric properties of the Simplified Inguinal Pain Questionnaire (sIPQ) and compare it to the regular Inguinal Pain Questionnaire (IPQ) for external validation. To do so, the IPQ and sIPQ were telephonically administered at 7 and 28 days postoperatively for a cohort of 25 patients who underwent Lichtenstein hernioplasty. A psychometric analysis of the scores was done using Cronbach's alpha and test-retest assessments. The agreement rate of the mean-standardized values between scores was afterwards calculated. We found closely similar psychometric values for the IPQ and sIPQ. The agreement rate between scores was 97% (p < 0.001). Taken together, the results demonstrate that the sIPQ has psychometric values that are very similar to those of the full IPQ. Its shorter number of items is specifically designed to enable telephonic follow-up and streamline both postoperative care and telemedicine.

Postoperative inguinal pain and disability after Lichtenstein versus ONSTEP hernia repair: analysis of responses to the inguinal pain questionnaire in Spanish.

PURPOSE: To validate the Inguinal Pain Questionnaire (IPQ) in the Spanish Language and test its use in a randomized controlled trial (RCT) of hernia repair using the Lichtenstein technique vs. the ONSTEP technique. We simplified the IPQ using a principal component analysis (PCA) approach as a secondary objective. METHODS: The IPQ was translated into Spanish and validated in a cohort of 21 patients. Thereafter, 40 patients were randomized to undergo hernia repair by the Lichtenstein technique or the ONSTEP technique. IPQ and pain visual analogue (VAS) score trends over time were compared using a repeated-measures mixed-effects model. RESULTS: The Spanish version of the IPQ showed an internal consistency similar to that of the original score. No significant differences were found in the IPQ responses, pain VAS, or the rate of self-reported pain between patients who underwent the Lichtenstein technique and those who underwent the ONSTEP technique. Following PCA analysis, the number of items on the IPQ was reduced from 18 to 10. CONCLUSIONS: The Spanish version of the IPQ measures postoperative inguinal pain adequately. Based on our findings, the ONSTEP technique was not superior to the Lichtenstein technique. The simplified version of the IPQ is not significantly different from the full version and it is easier to complete. CLINICAL TRIAL REGISTRATION: NCT04138329, registered on October 24, 2019.

3D Printed Polyurethane Scaffolds for the Repair of Bone Defects.

Critical-size bone defects are those that will not heal without intervention and can arise secondary to trauma, infection, and surgical resection of tumors. Treatment options are currently limited to filling the defect with autologous bone, of which there is not always an abundant supply, or ceramic pastes that only allow for limited osteo-inductive and -conductive capacity. In this study we investigate the repair of bone defects using a 3D printed LayFomm scaffold. LayFomm is a polymer blend of polyvinyl alcohol (PVA) and polyurethane (PU). It can be printed using the most common method of 3D printing, fused deposition modeling, before being washed in water-based solutions to remove the PVA. This leaves a more compliant, micro-porous PU elastomer. In vitro analysis of dental pulp stem cells seeded onto macro-porous scaffolds showed their ability to adhere, proliferate and form mineralized matrix on the scaffold in the presence of osteogenic media. Subcutaneous implantation of LayFomm in a rat model showed the formation of a vascularized fibrous capsule, but without a chronic inflammatory response. Implantation into a mandibular defect showed significantly increased mineralized tissue production when compared to a currently approved bone putty. While their mechanical properties are insufficient for use in load-bearing defects, these findings are promising for the use of polyurethane scaffolds in craniofacial bone regeneration.

The Promise of Smartphone Applications in the Remote Monitoring of Postsurgical Wounds: A Literature Review.

OBJECTIVE: To review the clinical and scientific literature on remote monitoring and management of postsurgical wounds using smartphone applications (apps). DATA SOURCES: MEDLINE, PubMed, EMBASE, and Cochrane libraries were searched for relevant articles on patients who received surgery and were monitored postdischarge via an app. STUDY SELECTION: Articles were selected with the terms "mobile phones," "smartphones," "wounds," "monitor," and "patient preference." DATA EXTRACTION: The authors found 276 review articles related to telemedicine in wound care. Investigators reviewed the titles and abstracts of the search results and selected 83 articles that were relevant to the remote monitoring of wounds using smartphone apps. DATA SYNTHESIS: The topics explored in selected literature included smartphone app importance to telemedicine, benefits (medical and financial), app examples, and challenges in the context of wound monitoring and management. The authors identified several challenges and limitations that future studies in the field need to address. CONCLUSIONS: Remote monitoring and management of wounds using smartphone apps is a valuable technique to enhance the quality of and access to healthcare. However, although some patients may prefer this technology, some lack technological competence, limiting telemedicine's applicability. In addition, issues remain with the reliable interpretation of data collected through apps.

Three-Dimensional Printed Polylactic Acid Scaffolds Promote Bone-like Matrix Deposition in Vitro.

Large bone defects represent a significant challenge for clinicians and surgeons. Tissue engineering for bone regeneration represents an innovative solution for this dilemma and may yield attractive alternate bone substitutes. Three-dimensional (3D) printing with inexpensive desktop printers shows promise in generating high-resolution structures mimicking native tissues using biocompatible, biodegradable, and cost-effective thermoplastics, which are already FDA-approved for food use, drug delivery, and many medical devices. Microporous 3D-printed polylactic acid scaffolds, with different pore sizes (500, 750, and 1000 µm), were designed and manufactured using an inexpensive desktop 3D printer, and the mechanical properties were assessed. The scaffolds were compared for cell growth, activity, and bone-like tissue formation using primary human osteoblasts. Osteoblasts showed high proliferation, metabolic activity, and osteogenic matrix protein production, in which 750 µm pore-size scaffolds showed superiority. Further experimentation using human mesenchymal stem cells on 750 µm pore scaffolds showed their ability in supporting osteogenic differentiation. These findings suggest that even in the absence of any surface modifications, low-cost 750 µm pore-size 3D-printed scaffolds may be suitable as a bone substitute for repair of large bone defects.