Evaluation of BMP2/miRNA co-expression systems for potent therapeutic efficacy in bone-tissue regeneration.

Reconstruction of bone defects and compensation of deficient repair mechanisms represent important goals within the field of regenerative medicine and require novel safe strategies for translation into the clinic. A non-viral osteogenic gene therapeutic vector system ('hybrid vectors') was generated, combining an improved bone morphogenetic protein 2 (BMP2) gene cassette and single pro-osteogenic microRNAs (miR-148b-3p, miR-20-5p, miR-590b-5p), driven by the U6 promoter. The vectors were tested in vitro for their osteogenic differentiation potential in C2C12 and C3H/10T1/2 cell lines, using BMP2 alone as control. After confirming BMP2 expression and miRNA transcription, increased osteogenic differentiation was observed by all hybrid vectors, but most consistently by BMP2/miR-590-5p, using alkaline phosphatase enzyme activity assays and osteogenic marker mRNA quantitation, including runt-related transcription factor 2 (Runx2), collagen type 1 (Col1a1) and osteocalcin. To visualise target mRNAs of the respective miRNAs, next generation sequencing was performed, confirming down-regulation of mRNA targets of the hybrid vectors. Since the hybrid vector consisting of BMP2 and miR-590-5p showed the largest increase in osteogenic differentiation in vitro, this was tested in a mouse ectopic-bone model. Mineralisation was more than with BMP2 alone. The present study showed hybrid vectors as a novel non-viral gene therapeutic plasmid system for combining therapeutic effects of recombinant protein expression and miRNA transcription that did not add to the burden of the translation machinery, while improving the therapeutic efficacies. In vivo proof-of-principle in the context of bone regeneration suggested that such hybrid vectors will be applicable in a wide array of gene therapeutic strategies.

Repopulation of decellularised articular cartilage by laser-based matrix engraving.

BACKGROUND: In spite of advances in the treatment of cartilage defects using cell and scaffold-based therapeutic strategies, the long-term outcome is still not satisfying since clinical scores decline years after treatment. Scaffold materials currently used in clinical settings have shown limitations in providing suitable biomechanical properties and an authentic and protective environment for regenerative cells. To tackle this problem, we developed a scaffold material based on decellularised human articular cartilage. METHODS: Human articular cartilage matrix was engraved using a CO2 laser and treated for decellularisation and glycosaminoglycan removal. Characterisation of the resulting scaffold was performed via mechanical testing, DNA and GAG quantification and in vitro cultivation with adipose-derived stromal cells (ASC). Cell vitality, adhesion and chondrogenic differentiation were assessed. An ectopic, unloaded mouse model was used for the assessment of the in vivo performance of the scaffold in combination with ASC and human as well as bovine chondrocytes. The novel scaffold was compared to a commercial collagen type I/III scaffold. FINDINGS: Crossed line engravings of the matrix allowed for a most regular and ubiquitous distribution of cells and chemical as well as enzymatic matrix treatment was performed to increase cell adhesion. The biomechanical characteristics of this novel scaffold that we term CartiScaff were found to be superior to those of commercially available materials. Neo-tissue was integrated excellently into the scaffold matrix and new collagen fibres were guided by the laser incisions towards a vertical alignment, a typical feature of native cartilage important for nutrition and biomechanics. In an ectopic, unloaded in vivo model, chondrocytes and mesenchymal stromal cells differentiated within the incisions despite the lack of growth factors and load, indicating a strong chondrogenic microenvironment within the scaffold incisions. Cells, most noticeably bone marrow-derived cells, were able to repopulate the empty chondrocyte lacunae inside the scaffold matrix. INTERPRETATION: Due to the better load-bearing, its chondrogenic effect and the ability to guide matrix-deposition, CartiScaff is a promising biomaterial to accelerate rehabilitation and to improve long term clinical success of cartilage defect treatment. FUNDING: Austrian Research Promotion Agency FFG ("CartiScaff" #842455), Lorenz Böhler Fonds (16/13), City of Vienna Competence Team Project Signaltissue (MA23, #18-08).

Stromal vascular fraction cells as biologic coating of mesh for hernia repair.

BACKGROUND: The interest in non-manipulated cells originating from adipose tissue has raised tremendously in the field of tissue engineering and regenerative medicine. The resulting stromal vascular fraction (SVF) cells have been successfully used in numerous clinical applications. The aim of this experimental work is, first to combine a macroporous synthetic mesh with SVF isolated using a mechanical disruption process, and to assess the effect of those cells on the early healing phase of hernia. METHODS: Human SVF cells combined with fibrin were used to coat commercial titanized polypropylene meshes. In vitro, viability and growth of the SVF cells were assessed using live/dead staining and scanning electron microscopy. The influence of SVF cells on abdominal wall hernia healing was conducted on immunodeficient rats, with a focus on short-term vascularization and fibrogenesis. RESULTS: Macroporous meshes were easily coated with SVF using a fibrin gel as temporary carrier. The in vitro experiments showed that the whole process including the isolation of human SVF cells and their coating on PP meshes did not impact on the SVF cells' viability and on their capacity to attach and to proliferate. In vivo, the SVF cells were well tolerated by the animals, and coating mesh with SVF resulted in a decrease degree of vascularity compared to control group at day 21. CONCLUSIONS: The utilization of SVF-coated mesh influences the level of angiogenesis during the early onset of tissue healing. Further long-term animal experiments are needed to confirm that this effect correlates with a more robust mesh integration compared to non-SVF-coated mesh.

Adipose-tissue-derived therapeutic cells in their natural environment as an autologous cell therapy strategy: the microtissue-stromal vascular fraction.

The prerequisite for a successful clinical use of autologous adipose-tissue-derived cells is the highest possible regenerative potential of the applied cell population, the stromal vascular fraction (SVF). Current isolation methods depend on high enzyme concentration, lysis buffer, long incubation steps and mechanical stress, resulting in single cell dissociation. The aim of the study was to limit cell manipulation and obtain a derivative comprising therapeutic cells (microtissue-SVF) without dissociation from their natural extracellular matrix, by employing a gentle good manufacturing practice (GMP)-grade isolation. The microtissue-SVF yielded larger numbers of viable cells as compared to the improved standard-SVF, both with low enzyme concentration and minimal dead cell content. It comprised stromal tissue compounds (collagen, glycosaminoglycans, fibroblasts), capillaries and vessel structures (CD31+, smooth muscle actin+). A broad range of cell types was identified by surface-marker characterisation, including mesenchymal, haematopoietic, pericytic, blood and lymphatic vascular and epithelial cells. Subpopulations such as supra-adventitial adipose-derived stromal/stem cells and endothelial progenitor cells were significantly more abundant in the microtissue-SVF, corroborated by significantly higher potency for angiogenic tube-like structure formation in vitro. The microtissue-SVF showed the characteristic phenotype and tri-lineage mesenchymal differentiation potential in vitro and an immunomodulatory and pro-angiogenic secretome. In vivo implantation of the microtissue-SVF combined with fat demonstrated successful graft integration in nude mice. The present study demonstrated a fast and gentle isolation by minor manipulation of liposuction material, achieving a therapeutically relevant cell population with high vascularisation potential and immunomodulatory properties still embedded in a fraction of its original matrix.

A critical review of the in vitro and in vivo models for the evaluation of anti-infective meshes.

BACKGROUND: Infectious complications following mesh implantation for abdominal wall repair appear in 0.7 up to 26.6% of hernia repairs and can have a detrimental impact for the patient. To prevent or to treat mesh-related infection, the scientific community is currently developing a veritable arsenal of antibacterial meshes. The numerous and increasing reports published every year describing new technologies indicate a clear clinical need, and an academic interest in solving this problem. Nevertheless, to really appreciate, to challenge, to compare and to optimize the antibacterial properties of next generation meshes, it is important to know which models are available and to understand them. PURPOSE: We proposed for the first time, a complete overview focusing only on the in vitro and in vivo models which have been employed specifically in the field of antibacterial meshes for hernia repair. RESULTS AND CONCLUSION: From this investigation, it is clear that there has been vast progress and breadth in new technologies and models to test them. However, it also shows that standardization or adoption of a more restricted number of models would improve comparability and be a benefit to the field of study.

Photobiomodulation of freshly isolated human adipose tissue-derived stromal vascular fraction cells by pulsed light-emitting diodes for direct clinical application.

A highly interesting source for adult stem cells is adipose tissue, from which the stromal vascular fraction (SVF)-a heterogeneous cell population including the adipose-derived stromal/stem cells-can be obtained. To enhance the regenerative potential of freshly isolated SVF cells, low-level light therapy (LLLT) was used. The effects of pulsed blue (475 nm), green (516 nm), and red (635 nm) light from light-emitting diodes applied on freshly isolated SVF were analysed regarding cell phenotype, cell number, viability, adenosine triphosphate content, cytotoxicity, and proliferation but also osteogenic, adipogenic, and proangiogenic differentiation potential. The colony-forming unit fibroblast assay revealed a significantly increased colony size after LLLT with red light compared with untreated cells, whereas the frequency of colony-forming cells was not affected. LLLT with green and red light resulted in a stronger capacity to form vascular tubes by SVF when cultured within 3D fibrin matrices compared with untreated cells, which was corroborated by increased number and length of the single tubes and a significantly higher concentration of vascular endothelial growth factor. Our study showed beneficial effects after LLLT on the vascularization potential and proliferation capacity of SVF cells. Therefore, LLLT using pulsed light-emitting diode light might represent a new approach for activation of freshly isolated SVF cells for direct clinical application.

Extracorporeal shock wave therapy in situ - novel approach to obtain an activated fat graft.

One of the mainstays of facial rejuvenation strategies is volume restoration, which can be achieved by autologous fat grafting. In our novel approach, we treated the adipose tissue harvest site with extracorporeal shock wave therapy (ESWT) in order to improve the quality of the regenerative cells in situ. The latter was demonstrated by characterizing the cells of the stromal vascular fraction (SVF) in the harvested liposuction material regarding cell yield, adenosine triphosphate (ATP) content, proliferative capacity, surface marker profile, differentiation potential and secretory protein profile. Although the SVF cell yield was only slightly enhanced, viability and ATP concentration of freshly isolated cells as well as proliferation doublings after 3 weeks in culture were significantly increased in the ESWT compared with the untreated group. Likewise, cells expressing mesenchymal and endothelial/pericytic markers were significantly elevated concomitant with an improved differentiation capacity towards the adipogenic lineage and enhancement in specific angiogenic proteins. Hence, in situ ESWT might be applied in the future to promote cell fitness, adipogenesis and angiogenesis within the fat graft for successful facial rejuvenation strategies with potential long-term graft survival.

Liquid antiadhesive agents for intraperitoneal hernia repair procedures: Artiss® compared to CoSeal® and Adept® in an IPOM rat model.

BACKGROUND: Adhesion formation remains an important issue in hernia surgery. Liquid agents were developed for easy and versatile application, especially in laparoscopy. The aim of this study was to compare the antiadhesive effect of fibrin sealant (FS, Artiss®), Icodextrin (ID, Adept®) and Polyethylene glycol (PEG, CoSeal®) alone and in combination and to evaluate the resulting effect on tissue integration of the mesh. METHODS: A total of 56 Sprague-Dawley rats were operated in open IPOM technique. A middleweight polypropylene mesh of 2 × 2 cm size was implanted and covered with 1: FS, 2: ID, 3: PEG, 4: FS + ID, 5: FS + PEG, 6: PEG + ID, 7: control group, uncovered mesh (n = 8 per treatment/control). Observation period was 30 days. Macroscopic and histological evaluation was performed. RESULTS: Severe adhesions were found in group 2 (ID), group 6 (PEG + ID) and the controls. Best results were achieved with FS alone or FS + ID. Mesh integration in the treatment groups was reduced in comparison with the control group. This is a new finding possibly relevant for the outcome of intraperitoneal mesh repair. Group 6 (PEG + ID) showed an impairment of tissue integration with <50 % of the mesh surface in seven samples. CONCLUSION: FS alone and in combination with ID yielded excellent adhesion prevention. ID alone did not show significant adhesion prevention after 30 days. Tissue integration of FS-covered meshes was superior to ID or PEG alone or combined. PEG did show adhesion prevention comparable to FS but evoked impaired tissue integration. So Artiss® is among the most potent antiadhesive agents in IPOM repair.

Abdominal wall reinforcement: biologic vs. degradable synthetic devices.

BACKGROUND: New biodegradable synthetic and biologic hernia implants have been promoted for rapid integration and tissue reinforcement in challenging repairs, e.g. at the hiatus or in contaminated wound fields. Interestingly, experimental data to support or falsify this assumption is scarce. METHODS: Synthetic (BioA®) and biologic implants (porcine and bovine collagen matrices Strattice® and Veritas®) have been tested in experimental onlay hernia repair in rats in observation periods of 30 and 60 days. The key outcome parameters were mesh integration and reinforcement of the tissue at the implant site over sutured and sealed defects as well as comparison to native abdominal wall. Macroscopic assessment, biomechanical analysis and histology with haematoxylin/eosin staining, collagen staining and van Willebrand factor staining for detection of neovascularization were performed. RESULTS: BioA® was well integrated. Although the matrices were already fragmented at 60 days follow-up, hernia sites treated with synthetic scaffolds showed a significantly enhanced tissue deflection and resistance to burst force when compared to the native abdominal wall. In porcine and bovine matrices, tissue integration and shrinkage were significantly inferior to BioA®. Histology revealed a lack of fibroblast ingrowth through mesh interstices in biologic samples, whereas BioA® was tightly connected to the underlying tissue by reticular collagen fibres. CONCLUSIONS: Strattice® and Veritas® yielded reduced tissue integration and significant shrinkage, prohibiting further biomechanical tests. The synthetic BioA® provides little inherent strength but reticular collagen remodelling led to an augmentation of the scar due to significantly higher burst force resistance in comparison to native tissue.

Improved osteogenic vector for non-viral gene therapy.

Therapeutic compensation of deficient bone regeneration is a challenging task and a topic of on-going search for novel treatment strategies. One promising approach for improvement involves non-viral gene delivery using the bone morphogenetic protein-2 (BMP-2) gene to provide transient, local and sustained expression of the growth factor. However, since efficiency of non-viral gene delivery is low, this study focused on the improvement of a BMP-2 gene expression system, aiming for compensation of poor transfection efficiency. First, the native BMP-2 gene sequence was modified by codon optimisation and altered by inserting a highly truncated artificial intron (96 bp). Transfection of multiple cell lines and rat adipose-derived mesenchymal stem cells with plasmids harbouring the improved BMP-2 sequence led to a several fold increased expression rate and subsequent osteogenic differentiation. Additionally, comparing expression kinetics of elongation factor 1 alpha (EF1α) promoter with a state of the art CMV promoter revealed significantly higher BMP-2 expression when under the influence of the EF1α promoter. Results obtained by quantification of bone markers as well as osteogenic assays showed reduced sensitivity to promoter silencing effects of the EF1α promoter in rat adipose-derived mesenchymal stem cells. Finally, screening of several protein secretion signals using either luciferase or BMP-2 as reporter protein revealed no superior candidates for potential replacement of the native BMP-2 secretion signal. Taken together, by enhancing the exogenous BMP-2 expression system, low transfection efficiencies in therapeutic applications can be compensated, making safe non-viral systems even more suitable for tissue regeneration approaches.

Fabrication of silk mesh with enhanced cytocompatibility: preliminary in vitro investigation toward cell-based therapy for hernia repair.

Recent studies have demonstrated that combining cells with meshes prior to implantation successfully enhanced hernia repair. The idea is to create a biologic coating surrounding the mesh with autologous cells, before transplantation into the patient. However, due to the lack of a prompt and robust cell adhesion to the meshes, extensive in vitro cultivation is required to obtain a homogenous cell layer covering the mesh. In this context, the objective of this publication is to manufacture meshes made of silk fibres and to enhance the cytoadhesion and cytocompatibility of the biomaterial by surface immobilization of a pro-adhesive wheat germ agglutinin (lectin WGA). We first investigated the affinity between the glycoprotein WGA and cells, in solution and then after covalent immobilization of WGA on silk films. Then, we manufactured meshes made of silk fibres, tailored them with WGA grafting and finally evaluated the cytocompatibility and the inflammatory response of silk and silk-lectin meshes compared to common polypropylene mesh, using fibroblasts and peripheral blood mononuclear cells, respectively. The in vitro experiments revealed that the cytocompatibility of silk can be enhanced by surface immobilization with lectin WGA without exhibiting negative response in terms of pro-inflammatory reaction. Grafting lectin to silk meshes could bring advantages to facilitate cell-coating of meshes prior to implantation, which is an imperative prerequisite for abdominal wall tissue regeneration using cell-based therapy.

Erratum to: The impact of hydrophobic hernia mesh coating by omega fatty acid on atraumatic fibrin sealant fixation.

Erratum to: Hernia DOI 10.1007/s10029-014-1304-y. The authors would like to notify readers that unfortunately, Fig. 1 and associated captions are incorrectly published in the original publication. The correct figure and legend are given here.

The impact of hydrophobic hernia mesh coating by omega fatty acid on atraumatic fibrin sealant fixation.

BACKGROUND: Fibrin sealant (FS) is a safe and efficient fixation method in open intraperitoneal hernia repair. While favourable results have been achieved with hydrophilic meshes, hydrophobic (such as Omega fatty acid coated) meshes (OFM) have not been specifically assessed so far. Atrium C-qur lite(®) mesh was tested in rats in models of open onlay and intraperitoneal hernia repair. METHODS: 44 meshes (2 × 2 cm) were implanted in 30 male Sprague-Dawley rats in open (n = 2 meshes per animal) and intraperitoneal technique (IPOM; n = 1 mesh per animal). Animals were randomised to four groups: onlay and IPOM sutured vs. sealed. Follow-up was 6 weeks, sutured groups serving as controls. Evaluation criteria were mesh dislocation, adhesions and foreign body reaction. RESULTS: FS provided a reliable fixation in onlay technique, whereas OFM meshes dislocated in the IPOM position when sealed only. CONCLUSION: FS mesh fixation was safe with OFM meshes in open onlay repair. Intraperitoneal placement of hydrophobic meshes requires additional fixation and cannot be achieved with FS alone.

The future of stem cell therapy in hernia and abdominal wall repair.

INTRODUCTION: Stem cell therapies have been proposed in preclinical trials as new treatment options in abdominal wall repair. MATERIALS AND METHODS: This work lists sources of feasible cell lines and the current status of literature and provides a cautious outlook into future developments. Special attention was paid to translational issues and practicabilty in a complex field. CONCLUSION: Cell-based therapies will play a role in the clinical setting in the future. Regulatory and ethical issues need to be addressed as well as the proof of cost-effectiveness.

A comparison of Progrip(®) and Adhesix (®) self-adhering hernia meshes in an onlay model in the rat.

BACKGROUND: Atraumatic fixation is a key element of modern hernia repair. Two different concepts of self-adhering meshes were directly compared in this study. Adhesix(®) (AH) is coated with polyethylene glycol (PEG) and polyvinylpyrrolidone (PVP), whereas Parietene Progrip(®) (PP) relies on the mechanical principle of micro grips made of polylactic acid (PLA). These meshes are the main competitors in the field. METHODS: AH and PP were tested in Sprague-Dawley rats at 14 and 90 days. Four groups were operated (n = 8 animals per group). Two meshes were implanted per animal in an operation model of onlay hernia repair. Dislocation, tissue integration and foreign-body reaction were evaluated. RESULTS: AH dislocated significantly more frequently (every second mesh) at both time points of observation than PP. Tissue integration was good with PP and could not be reliably assessed in AH due to frequent dislocation. Histologic examination revealed only a mild foreign body reaction in all groups. CONCLUSIONS: In our hands, PP (mechanical grip fixation) was superior to hydrogel fixation with PEG and PVP in AH in an onlay model. The reason for dislocation of AH requires further clarification as well as the impact of long-term degradation of the PLA grips.

Systemic inhibition and liver-specific over-expression of PAI-1 failed to improve survival in all-inclusive populations or homogenous cohorts of CLP mice.

BACKGROUND: The role of plasminogen activator inhibitor type-1 (PAI-1) in abdominal sepsis remains elusive. OBJECTIVES: To study the influence of inhibition and over-expression of PAI-1 upon survival in cecal ligation and puncture (CLP) sepsis. METHODS: (i) Mice underwent moderate CLP and received 10 mg kg(-1) of either monoclonal anti-PAI-1 (MA-MP6H6) or control (MA-Control) antibody intravenously at 0, 18 or 30 h post-CLP. The 30-h treatment group was additionally stratified into mice predicted to survive (P-SUR) or die (P-DIE) based on IL 6 measured at 24 h post-CLP. (ii) PAI-1 expression was induced with pLIVE.PAI-1 plasmid administered 72 h pre-CLP. Blood was sampled for 5 days and survival was monitored for 28 days. RESULTS: MA-MP6H6 effectively neutralized active PAI-1 and fully restored fibrinolysis while PAI-1 over-expression was liver-specific and correlated with PAI-1 increase in the blood. Without stratification, MA-MP6H6 co-/post-treatment conferred no survival benefit. Prospective stratification (IL-6 cut-off: 14 ng mL(-1) ) suggested increased mortality by MA-MP6H6 treatment in P-SUR that reached 30% difference (vs. MA-Control; P < 0.05) after a retrospective cut-off readjustment to 3.3 ng mL(-1) for better P-SUR homogeneity. Subsequent prospective anti-PAI-1 treatment in P-SUR mice with 3.3 ng mL(-1) cut-off demonstrated a negative but statistically insignificant effect: mortality was higher by 17% after MA-MP6H6 vs. MA-Control. Over-expression of PAI 1 did not alter post-CLP survival. Neither PAI-1 inhibition nor over-expression meaningfully modified inflammatory response and/or organ function. CONCLUSIONS: Restoration of fibrinolysis in early abdominal sepsis was not beneficial and it may prove detrimental in subjects with the lowest risk of death, while preemptive PAI-1 up-regulation at the current magnitude was not protective.

Constitutive and inducible co-expression systems for non-viral osteoinductive gene therapy.

Tissue regenerative gene therapy requires expression strategies that deliver therapeutic effective amounts of transgenes. As physiological expression patterns are more complex than high-level expression of a singular therapeutic gene, we aimed at constitutive or inducible co-expression of 2 transgenes simultaneously. Co-expression of human bone morphogenetic protein 2 and 7 (BMP2/7) from constitutively expressing and doxycycline inducible plasmids was evaluated in vitro in C2C12 cells with osteocalcin reporter gene assays and standard assays for osteogenic differentiation. The constitutive systems were additionally tested in an in vivo pilot for ectopic bone formation after repeated naked DNA injection to murine muscle tissue. Inductor controlled differentiation was demonstrated in vitro for inducible co-expression. Both co-expression systems, inducible and constitutive, achieved significantly better osteogenic differentiation than single factor expression. The potency of the constitutive co-expression systems was dependent on relative expression cassette topology. In vivo, ectopic bone formation was demonstrated in 6/13 animals (46% bone formation efficacy) at days 14 and 28 in hind limb muscles as proven by in vivo µCT and histological evaluation. In vitro findings demonstrated that the devised single vector BMP2/7 co-expression strategy mediates superior osteoinduction, can be applied in an inductor controlled fashion and that its efficiency is dependent on expression cassette topology. In vivo results indicatethatco-expression of BMP2/7 applied by non-viral naked DNA gene transfer effectively mediates bone formation without the application of biomaterials, cells or recombinant growth factors, offering a promising alternative to current treatment strategies with potential for clinical translation in the future.

Ultrasound biomicroscopy (UBM) and scanning acoustic microscopy (SAM) for the assessment of hernia mesh integration: a comparison to standard histology in an experimental model.

BACKGROUND: Mesh integration is a key parameter for reliable and safe hernia repair. So far, its assessment is based on histology obtained from rare second-look operations or experimental research. Therefore, non-invasive high-resolution imaging techniques would be of great value. Ultrasound biomicroscopy (UBM) and scanning acoustic microscopy (SAM) have shown potential in the imaging of hard and soft tissues. This experimental study compared the detection of mesh integration, foreign body reaction and scar formation in UBM/SAM with standard histology. MATERIALS AND METHODS: Ten titanized polypropylene meshes were implanted in rats in a model of onlay repair. 17 days postoperative animals were killed and samples were paraffin embedded for histology (H&E, Cresyl violet) or processed for postmortem UBM/SAM. The observation period was uneventful and meshes appeared well integrated. RESULTS: Relocation of neighboring cross-sectional levels could easily be achieved with the 40-MHz UBM and granulation tissue could be distinguished from adjacent muscle tissue layers. The spatial resolution of approximately 8 µm of the 200-MHz UBM system images was comparable to standard histology (2.5-5× magnification) and allowed a clear identification of mesh fibers and different tissue types, e.g., scar, fat, granulation, and muscle tissues, as well as vessels, abscedations, and foreign body giant cell clusters. CONCLUSION: This pilot study demonstrates the potential of high-frequency ultrasound to assess hernia mesh integration non-invasively. Although the methods lack cell-specific information, tissue integration could reliably be assessed. The possibility of conducting UBM in vivo advocates this method as a guidance tool for the indication of second-look operations and subsequent elaborate histological analyses.