Injectable Fillers for Lower Face Rejuvenation.

The lower face is an integral component of a beautiful face. Age-related changes in this region are so significant that they are often easily appreciated by patients. The aging process not only includes volume loss or downward fat repositioning, but also soft tissue laxity, skin changes, and even bony resorption. In the lower face, this results in sagging of the soft tissue leading to the formation of jowling, loss of an attractive well-defined jaw line, and a retruded chin. Both surgical and non-surgical options are available to reverse the aging signs; however, the popularity of non-surgical treatment has dramatically increased in last 2 decades.

Outcomes of Calvarial and Soft-Tissue Reconstruction with Latissimus Dorsi-Rib Osteomyocutaneous Free Flap.

BACKGROUND: The latissimus dorsi-rib osteomyocutaneous free flap (LDRF) has been used for autologous reconstruction of large composite calvarial and scalp defects. In this study, the authors aim to present clinical and patient-reported outcomes after LDRF reconstruction. METHODS: An anatomical study was conducted to evaluate the distribution of the connecting perforators between the thoracodorsal and intercostal systems. An institutional review board-approved retrospective review of 10 patients who underwent LDRF with one or two ribs for treatment of cranial defects was conducted. Patient-reported outcomes regarding quality of life, neurologic status, and functional status were evaluated using validated surveys. One-way analysis of variance and post hoc Tukey tests were used for anatomical outcomes. Preoperative and postoperative scores were compared using paired t tests. RESULTS: The tenth rib (4.65 ± 2.01) followed by the ninth rib (3.7 ± 1.63) had the highest number of perforators. A combination of the ninth and eleventh ribs exhibited maximal perforator number and pedicle length. All patients had stable LDRF reconstructions. Eight patients completed both preoperative and postoperative questionnaires; Median clinical follow-up was 48 months (range, 34 to 70 months). Scores trended toward improvement but did not reach statistical significance on the Karnofsky Performance Scale ( P = 0.22), the Functional Independence Measure (Motor, P = 0.52; Cognitive, P = 0.55), or the Headache Disability Index ( P = 0.38). The minimum clinically important difference was surpassed, demonstrating improvement of function for 71% of patients on the Barthel Index and 63% on the Selective Functional Movement Assessment test. CONCLUSION: The LDRF can improve cognitive and physical functional status in complex patients with prior failed reconstructions for composite scalp and skull defects. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Antibody-modified Gold Nanobiostructures: Advancing Targeted Photodynamic Therapy for Improved Cancer Treatment.

Photodynamic therapy (PDT) is an innovative, non-invasive method of treating cancer that uses light-activated photosensitizers to create reactive oxygen species (ROS). However, challenges associated with the limited penetration depth of light and the need for precise control over photosensitizer activation have hindered its clinical translation. Nanomedicine, particularly gold nanobiostructures, offers promising solutions to overcome these limitations. This paper reviews the advancements in PDT and nanomedicine, focusing on applying antibody-modified gold nanobiostructures as multifunctional platforms for enhanced PDT efficacy and improved cancer treatment outcomes. The size, shape, and composition of gold nanobiostructures can significantly influence their PDT efficacy, making synthetic procedures crucial. Functionalizing the surface of gold nanobiostructures with various molecules, such as antibodies or targeting agents, bonding agents, PDT agents, photothermal therapy (PTT) agents, chemo-agents, immunotherapy agents, and imaging agents, allows composition modification. Integrating gold nanobiostructures with PDT holds immense potential for targeted cancer therapy. Antibody-modified gold nanobiostructures, in particular, have gained significant attention due to their tunable plasmonic characteristics, biocompatibility, and surface functionalization capabilities. These multifunctional nanosystems possess unique properties that enhance the efficacy of PDT, including improved light absorption, targeted delivery, and enhanced ROS generation. Passive and active targeting of gold nanobiostructures can enhance their localization near cancer cells, leading to efficient eradication of tumor tissues upon light irradiation. Future research and clinical studies will continue to explore the potential of gold nanobiostructures in PDT for personalized and effective cancer therapy. The synthesis, functionalization, and characterization of gold nanobiostructures, their interaction with light, and their impact on photosensitizers' photophysical and photochemical properties, are important areas of investigation. Strategies to enhance targeting efficiency and the evaluation of gold nanobiostructures in vitro and in vivo studies will further advance their application in PDT. The integrating antibody-modified gold nanobiostructures in PDT represents a promising strategy for targeted cancer therapy. These multifunctional nanosystems possess unique properties that enhance PDT efficacy, including improved light absorption, targeted delivery, and enhanced ROS generation. Continued research and development in this field will contribute to the advancement of personalized and effective cancer treatment approaches.

The advance anticancer role of polymeric core-shell ZnO nanoparticles containing oxaliplatin in colorectal cancer.

We evaluated the activity of core-shell ZnO nanoparticles (ZnO-NPs@polymer shell) containing Oxaliplatin via polymerization through in vitro studies and in vivo mouse models of colorectal cancer. ZnO NPs were synthesized in situ when the polymerization step was completed by co-precipitation. Gadolinium coordinated-ZnONPs@polymer shell (ZnO-Gd NPs@polymer shell) was synthesized by exploiting Gd's oxophilicity (III). The biophysical properties of the NPs were studied using powder X-ray diffraction (PXRD), Fourier transforms infrared spectroscopy, Ultraviolet-visible spectroscopy (UV-Vis), field emission electron microscopy (FESEM), transmission electron microscopy (TEM), atomic force microscopy, dynamic light scattering, and z-potential. (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) (MTT) was used to determine the antiproliferative activity of ZnO-Gd-OXA. Moreover, a xenograft mouse model of colon cancer was exerted to survey its antitumor activity and effect on tumor growth. In the following, the model was also evaluated by histological staining (H-E; Hematoxylin & Eosin and trichrome staining) and gene expression analyses through the application of RT-PCR/ELISA, which included biochemical evaluation (MDA, thiols, SOD, CAT). The formation of ZnO NPs, which contained a crystallite size of 16.8 nm, was confirmed by the outcomes of the PXRD analysis. The Plate-like morphology and presence of Pt were obtained in EDX outcomes. TEM analysis displayed the attained ZnO NPs in a spherical shape and a diameter of 33 ± 8.5 nm, while the hydrodynamic sizes indicated that the particles were highly aggregated. The biological results demonstrated that ZnO-Gd-OXA inhibited tumor growth by inducing reactive oxygen species and inhibiting fibrosis, warranting further research on this novel colorectal cancer treatment agent.

Polycaprolactone-based Nanocarriers Containing 5-fluorouracil as a Therapeutic Guided Drug Delivery Approach for Enhancing Anticancer Activity.

Nowadays, nano-platforms designed for drug delivery systems (DDSs) such as polymers, liposomes, and micelles have been demonstrated to be clinically efficient. The sustained drug release is one of the advantages of DDSs, especially polymer-based nanoparticles. The formulation could enhance the drug's durability, in which the biodegradable polymers are the most interesting building blocks of DDSs. Nano-carriers could circumvent many issues by localized drug delivery and release via certain internalization routes such as intracellular endocytosis paths and increasing biocompatibility. Polymeric nanoparticles and their nanocomposite are one of the most important classes of materials that can be used for the assembly of nanocarriers that can form complex, conjugated and encapsulated forms. The site-specific drug delivery may arise from the ability of nanocarriers to pass through the biological barrier, their specific interactions with receptors, and passive targeting. The better circulation, uptake, and stability along with targeting attributes lead to lesser side effects and damage to normal cells. Hence, in this review, the most recent achievements on polycaprolactone-based or -modified nanoparticles in drug delivery systems (DDSs) for 5-fluorouracil (5-FU) are presented.

Nanocarrier System for Increasing the Therapeutic Efficacy of Oxaliplatin.

The application of Oxaliplatin (OxPt) in different malignancies is reported to be accompanied by several side effects, including neuropathy, nausea, vomiting, diarrhea, mouth sores, low blood counts, loss of appetite, etc. The passive or active targeting of different tumors can improve OxPt delivery. Considering the demand for novel systems meant to improve the OxPt efficacy and define the shortcomings, we provided an overview of different approaches regarding the delivery of OxPt. There is an extending body of data that exhibits the value of liposomes and polymer- based drug delivery systems as the most successful systems among the OxPt drug delivery procedures. Several clinical trials have been carried out to investigate the side effects and dose-limiting toxicity of liposomal oxaliplatin, such as the assessment on Safety Study of MBP-426 (Liposomal Oxaliplatin Suspension for Injection) to Treat Advanced or Metastatic Solid Tumors. In addition, several studies indicated the biocompatibility and biodegradability of this product, as well as its option for being fictionalized to derive specialized smart nanosystems for the treatment of cancer. The better delivery of OxPt with weaker side effects could be generated by the exertion of Oxaliplatin, which involves the aggregation of new particles and multifaceted nanocarriers to compose a nanocomposite with both inorganic and organic nanoparticles.

Ex vivo normothermic preservation of amputated limbs with a hemoglobin-based oxygen carrier perfusate.

BACKGROUND: Ex vivo normothermic limb perfusion (EVNLP) preserves amputated limbs under near-physiologic conditions. Perfusates containing red blood cells (RBCs) have shown to improve outcomes during ex vivo normothermic organ perfusion, when compared with acellular perfusates. To avoid limitations associated with the use of blood-based products, we evaluated the feasibility of EVNLP using a polymerized hemoglobin-based oxygen carrier-201 (HBOC-201). METHODS: Twenty-four porcine forelimbs were procured from Yorkshire pigs. Six forelimbs underwent EVNLP with an HBOC-201-based perfusate, six with an RBC-based perfusate, and 12 served as static cold storage (SCS) controls. Ex vivo normothermic limb perfusion was terminated in the presence of systolic arterial pressure of 115 mm Hg or greater, fullness of compartments, or drop of tissue oxygen saturation by 20%. Limb contractility, weight change, compartment pressure, tissue oxygen saturation, oxygen uptake rates (OURs) were assessed. Perfusate fluid-dynamics, gases, electrolytes, metabolites, methemoglobin, creatine kinase, and myoglobin concentration were measured. Uniformity of skin perfusion was assessed with indocyanine green angiography and infrared thermography. RESULTS: Warm ischemia time before EVNLP was 35.50 ± 8.62 minutes (HBOC-201), 30.17 ± 8.03 minutes (RBC) and 37.82 ± 10.45 (SCS) (p = 0.09). Ex vivo normothermic limb perfusion duration was 22.5 ± 1.7 hours (HBOC-201) and 28.2 ± 7.3 hours (RBC) (p = 0.04). Vascular flow (325 ± 25 mL·min-1 vs. 444.7 ± 50.6 mL·min-1; p = 0.39), OUR (2.0 ± 1.45 mL O2·min-1·g-1 vs. 1.3 ± 0.92 mL O2·min-1·g-1 of tissue; p = 0.80), lactate (14.66 ± 4.26 mmol·L-1 vs. 13.11 ± 6.68 mmol·L-1; p = 0.32), perfusate pH (7.53 ± 0.25 HBOC-201; 7.50 ± 0.23 RBC; p = 0.82), flexor (28.3 ± 22.0 vs. 27.5 ± 10.6; p = 0.99), and extensor (31.5 ± 22.9 vs. 28.8 ± 14.5; p = 0.82) compartment pressures, and weight changes (23.1 ± 3.0% vs. 13.2 ± 22.7; p = 0.07) were not significantly different between HBOC-201 and RBC groups, respectively. In HBOC-201 perfused limbs, methemoglobin levels increased, reaching 47.8 ± 12.1% at endpoint. Methemoglobin saturation did not affect OUR (ρ = -0.15, r2 = 0.022; p = 0.45). A significantly greater number of necrotic myocytes was found in the SCS group at endpoint (SCS, 127 ± 17 cells; HBOC-201, 72 ± 30 cells; RBC-based, 56 ± 40 cells; vs. p = 0.003). CONCLUSION: HBOC-201- and RBC-based perfusates similarly support isolated limb physiology, metabolism, and function.

Full Facial Allotransplantation Including the Temporomandibular Joints: A Radiologic and Anatomical Cadaveric Study.

BACKGROUND: Facial allotransplantation including the temporomandibular joints may improve the functional outcomes in face transplant candidates who have lost or damaged this joint. METHODS: Linear and angular measurements were taken in 100 dry skulls and mandibles and in 100 three-dimensionally-reconstructed facial computed tomographic scans to determine the variability of the temporomandibular joint, glenoid fossa, and mandible. A vascular study was performed in six fresh cadaveric heads, followed by harvest of the face allograft in three heads. Next, four heads were used for mock transplantation (two donors and two recipients). The full facial allograft included four different segments: a Le Fort III, a mandibular tooth-bearing, and two condyle and temporomandibular joint-bearing segments. Statistical analysis was performed using SAS software. RESULTS: In only one-third of the skulls, the condylar shape was symmetric between right and left sides. There was a wide variability in the condylar coronal (range, 14.3 to 23.62 mm) and sagittal dimensions (range, 5.64 to 10.96 mm), medial intercondylar distance (range, 66.55 to 89.91 mm), and intercondylar angles (range, 85.27 to 166.94 degrees). This high variability persisted after stratification by sex, ethnicity, and age. The temporomandibular joint was harvested based on the branches of the superficial temporal and maxillary arteries. The design of the allograft allowed fixation of the two condyle and temporomandibular joint-bearing segments to the recipient skull base, preserving the articular disk-condyle-fossa relationship, and differences were adjusted at the bilateral sagittal split osteotomy sites. CONCLUSION: Procurement and transplantation of a temporomandibular joint-containing total face allograft is technically feasible in a cadaveric model.

Association between serum cell adhesion molecules with hs-CRP, uric acid and VEGF genetic polymorphisms in subjects with metabolic syndrome.

Metabolic syndrome (MetS) is associated with a pro-inflammatory state and endothelial dysfunction that places subjects with MetS at a higher risk of atherosclerosis. Inflammatory biomarkers are raised in patients at risk of developing cardiovascular diseases. In the current study, we aimed to examine the possible association between MetS and serum soluble adhesion molecules, hs-CRP, uric acid, and the genetic variations related to vascular endothelial growth factor (VEGF) gene. In this cross-sectional study, participants were enrolled from the Mashhad stroke and heart atherosclerotic disorders (MASHAD) study. The International Diabetes Federation criteria were used to define the MetS. Cell adhesion molecules (CAM) and serum hs-CRP were measured by ELISA and PEG-enhanced immunoturbidimetry method, respectively. We used a logistic regression analysis to determine independent associations of CAMs with the VEGF polymorphisms and MetS. Two hundred and 59 participants with and without MetS were enrolled. Participants with MetS and DM had a significantly higher serum E-selectin level (p < 0.05). Participants with a high serum E-selectin level had higher levels of hs-CRP, FBG, TG, uric acid, BMI and lower levels of serum HDL-C (p < 0.05). Interestingly, individuals with MetS with a genetic variant of the VEGF gene (rs6921438) had higher level of serum ICAM-1 (p = 0.04). There were significant associations between serum E-selectin concentrations and the presence of MetS, and its risk factors. Moreover, we demonstrated that MetS subjects with the rs6921438 genetic variant had a higher serum level of ICAM-1 (p < 0.05).

Nano-Biphasic Calcium Phosphate Ceramic for the Repair of Bone Defects.

Calcium phosphate bioceramics has recently experienced increased interest in bone reconstruction. Mimicking of natural structure of bone, like the use of nanomaterials, is an attractive approach for generating scaffolds for bone regeneration. The aim of present study was to evaluate the effect of nanonization on the biphasic calcium phosphate (BCP) ceramic in the repair of bone cavities in the canine mandible. A commercial BCP was dry-milled in a high energy planetary ball mill with zirconia balls and container. Three holes (8 mm in diameter) were outlined to the depth of cortical bone of mandibular angle of 5 dogs bilaterally. The first hole (positive control group A, n = 10) was filled in with commercial BCP material. The second hole was loaded with the nanonized BCP (experimental group C, n = 10) and the third one was left untreated (negative control group B, n = 10). The defects were allowed to regenerate for 8 weeks. New bone formation was greater in groups A and C than in B. No difference was seen between group A and group C (P = 0.676). The residual bone material in group C (19.34 ±â€Š8.03) was as much as one-half of that in group A (38.69 ±â€Š7.90%) (P = 0.000). The negative control group B presented the highest amount of soft tissue within the bone defects. The least percentage of marrow space was found in the positive control group (13.23 ±â€Š13.52). Our results depicted that the rate of resorption increased significantly after nanonization even though the nano-sized BCP failed to make a superior regeneration than the ordinary BCP.

Facial nerve repair with Gore-Tex tube and adipose-derived stem cells: an animal study in dogs.

PURPOSE: Synthetic conduits have been considered a viable option in nerve reconstructive procedures. They address the goal of entubulization and eliminate the disadvantages of autografts. However, despite all successful reports, none has contained regeneration characteristics, such as growth factors or essential cells, for nerve repair. The authors evaluated the capability of adipose-derived stem cells in Gore-Tex tubes to enhance facial nerve repair. MATERIALS AND METHODS: Undifferentiated mesenchymal stem cells were extracted from the autogenous adipose tissues of 7 mongrel dogs. The frontal branch of the facial nerve was transected. A gap size of 7 mm was repaired with an expanded polytetrafluoroethylene tube filled with undifferentiated adipose-derived stem cells encapsulated in alginate hydrogel. The control sides were repaired with the tube and alginate alone. The healing phase was 12 weeks. RESULTS: Except in 2 control sides, an organized neural tissue was formed within the tubes. Compared with the normal nerve diameter, there was a decreased ratio of 29% and 39% in the experimental and control groups, respectively. Neurofilament-positive axon counts were 67% of normal values in the 2 groups. There was no significant difference between groups in histomorphometric parameters. Nerve conduction velocity in the experimental group (28.5 ± 3.5 m/s) was significantly greater than in the control group (16.2 ± 7 m/s). The experimental group also exhibited a greater maximal amplitude of action potential (1.86 ± 0.24 mV) than the control group (1.45 ± 0.49 mV). CONCLUSIONS: Addition of stem cells in the Gore-Tex tube enhanced the neural repair from a functional standpoint. However, for better functional and histologic results, differentiated Schwann cells and other mediators may be warranted.

Effectiveness of fibrin adhesive in facial nerve anastomosis in dogs compared with standard microsuturing technique.

PURPOSE: Epineural suturing is the most common technique used for peripheral nerve anastomosis. In addition to the foreign body reaction to the suture material, the surgical duration and difficulty of suturing in confined anatomic locations are major problems. We evaluated the effectiveness of fibrin glue as an acceptable alternative for nerve anastomosis in dogs. METHODS: Eight adult female dogs weighing 18 to 24 kg were used in the present study. The facial nerve was transected bilaterally. On the right side, the facial nerve was subjected to epineural suturing; and on the left side, the nerve was anastomosed using fibrin adhesive. After 16 weeks, the nerve conduction velocity and proportion of the nerve fibers that crossed the anastomosis site were evaluated and compared for the epineural suture (right side) and fibrin glue (left side). The data were analyzed using the paired t test and univariate analysis of variance. RESULTS: The mean postoperative nerve conduction velocity was 29.87 ± 7.65 m/s and 26.75 ± 3.97 m/s on the right and left side, respectively. No statistically significant difference was found in the postoperative nerve conduction velocity between the 2 techniques (P = .444). The proportion of nerve fibers that crossed the anastomotic site was 71.25% ± 7.59% and 72.25% ± 8.31% on the right and left side, respectively. The histologic evaluation showed no statistically significant difference in the proportion of the nerve fibers that crossed the anastomotic site between the 2 techniques (P = .598). CONCLUSIONS: The results suggest that the efficacies of epineural suturing and fibrin gluing in peripheral nerve anastomosis are similar.