Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 30
Filtrar
1.
EFSA J ; 22(8): e8960, 2024 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-39104808

RESUMO

The EFSA Panel on Food Contact Materials (FCM) assessed the safety of the substances 'wax, rice bran, oxidised' and 'wax, rice bran, oxidised, calcium salt', used as additives up to 0.3% in polyethylene terephthalate (PET), polyamide (PA), thermoplastic polyurethane (TPU), polylactic acid (PLA) and poly(vinyl chloride) (PVC) in contact with all food types for long-term storage at room temperature and below, after hot-fill and/or heating. The substances consist of the chemical classes wax esters, carboxylic acids, alcohols and calcium salts of acids, along with an unidentified organic fraction up to ■■■■■ w/w. Migration into 10% ethanol and 4% acetic acid was below 0.012 mg/kg for each chemical class, and about 0.001 mg/kg for the unidentified fraction. In isooctane, migration was up to 0.297 mg/kg food for wax esters, below 0.01 mg/kg food for the other chemical classes and about 0.02 mg/kg food for the unidentified fraction. The contact with dry food and food simulated by 20% ethanol were considered covered by the migration tests with aqueous simulants. Based on genotoxicity assays and compositional analyses, the constituents of the chemical classes did not raise a concern for genotoxicity. The potential migration of individual constituents or groups of chemically-related compounds of the unidentified fraction would result in exposures below (for aqueous food) and above (for fatty food) the threshold of toxicological concern for genotoxic carcinogens. Therefore, the FCM Panel concluded that the substances are not of safety concern for the consumer, if used as additives up to 0.3% w/w in PET, PLA and rigid PVC materials and articles intended for contact with all food types except for fatty foods, for long-term storage at room temperature and below, including hot-fill and/or heating up to 100°C for up to 2 h.

2.
EFSA J ; 22(5): e8769, 2024 May.
Artigo em Inglês | MEDLINE | ID: mdl-38799480

RESUMO

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of amines, di-C14-C18-alkyl, oxidised, renamed by the Panel as amines, di-C14-C20-alkyl, oxidised, from hydrogenated vegetable oil. The substance amines, bis(hydrogenated tallow alkyl) oxidised, consisting of the same components, but originating from tallow, is currently authorised as FCM substance No 768. The vegetable-sourced substance is intended to be used at up to 0.1% w/w as antioxidant and/or stabiliser in the manufacture of polyolefin food contact materials (FCM) and articles intended for contact with dry, aqueous and acidic foods. The substance is a mixture consisting of linear N,N-dialkyl hydroxylamines and their corresponding amine, nitrone and oxime derivatives, as well as further components: tert-N-oxides, secondary amides and carboxylic acids. Specific migration was tested from polyethylene samples in 10% ethanol and 3% acetic acid for 2 h at 100°C followed by 10 days at 60°C. None of the non-authorised components were detected to migrate at detection limits (LoD) in the range 0.003-0.029 mg/kg. The LoD of authorised carboxylic acids was 0.35 mg/kg. The Panel reassessed the genotoxicity studies carried out on FCM No 768 and evaluated two new bacterial reverse mutation tests on the nitrone and oxime derivatives as well as new (qualitative/quantitative) structure-activity relationship (Q)SAR analyses on other components. The Panel concluded that the substance did not raise a concern for genotoxicity. The Panel concluded that the substance is not of safety concern for the consumers if it is used as an additive at 0.1% w/w in the manufacture of polyolefin FCM intended to be in contact with foods simulated by food simulants A, B, C and E, except for infant formula and human milk, for storage above 6 months at room temperature and below, including hot-fill conditions and heating up to 100°C for 2 h.

3.
EFSA J ; 22(4): e8694, 2024 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-38576538

RESUMO

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the substance 'phosphorous acid, triphenyl ester, polymer with 1,4-cyclohexanedimethanol and polypropylene glycol, C10-16 alkyl esters', when used as an additive in all types of polyolefins. The substance is a polymer containing ≤ 13% w/w of a low molecular weight fraction (LMWF, < 1000 Da). A polyethylene sample with 0.15% w/w of the substance was used in a comprehensive set of migration tests with food simulants. The specific migration was up to 0.014 and 0.023 mg/kg in 4% acetic acid and 10% ethanol, respectively. Migration into olive oil was estimated by the Panel to be up to 5.3 mg/kg under worst-case conditions of use. The migrating LMWF species were comprehensively identified. Those without phosphorous were either without alerts for genotoxicity or listed in Regulation (EU) 10/2011 with worst-case migrations well below their respective specific migration limits. Toxicological studies were performed using phosphite and phosphate versions of the substance enriched in its LMWF. The substance does not raise a concern for genotoxicity. From a repeated dose 90-day oral toxicity study in rats with a 50:50 phosphite:phosphate blend, the Panel identified a NOAEL of 250 mg/kg bw per day for each component of the blend. No delayed neurotoxicity in hens was observed. The CEP Panel concluded that the substance does not raise a safety concern for the consumer if its LMWF is not higher than 13% w/w, if it is used at up to 0.15% w/w in polyolefin materials and articles intended for contact with all food types, except for infant formula and human milk, for long-term storage at room temperature and below, after hot-fill and/or heating up to 100°C for up to 2 h, and if its migration does not exceed 5 mg/kg food.

4.
Front Toxicol ; 5: 1216369, 2023.
Artigo em Inglês | MEDLINE | ID: mdl-37538785

RESUMO

New approach methodologies (NAMs) have the potential to become a major component of regulatory risk assessment, however, their actual implementation is challenging. The European Partnership for the Assessment of Risks from Chemicals (PARC) was designed to address many of the challenges that exist for the development and implementation of NAMs in modern chemical risk assessment. PARC's proximity to national and European regulatory agencies is envisioned to ensure that all the research and innovation projects that are initiated within PARC agree with actual regulatory needs. One of the main aims of PARC is to develop innovative methodologies that will directly aid chemical hazard identification, risk assessment, and regulation/policy. This will facilitate the development of NAMs for use in risk assessment, as well as the transition from an endpoint-based animal testing strategy to a more mechanistic-based NAMs testing strategy, as foreseen by the Tox21 and the EU Chemical's Strategy for Sustainability. This work falls under work package 5 (WP5) of the PARC initiative. There are three different tasks within WP5, and this paper is a general overview of the five main projects in the Task 5.2 'Innovative Tools and methods for Toxicity Testing,' with a focus on Human Health. This task will bridge essential regulatory data gaps pertaining to the assessment of toxicological prioritized endpoints such as non-genotoxic carcinogenicity, immunotoxicity, endocrine disruption (mainly thyroid), metabolic disruption, and (developmental and adult) neurotoxicity, thereby leveraging OECD's and PARC's AOP frameworks. This is intended to provide regulatory risk assessors and industry stakeholders with relevant, affordable and reliable assessment tools that will ultimately contribute to the application of next-generation risk assessment (NGRA) in Europe and worldwide.

5.
EFSA J ; 21(7): e08100, 2023 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-37476081

RESUMO

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of poly(2-hydroxypropanoic acid), n-octyl/n-decyl esters (OLA8), which is intended to be used as a plasticiser into polylactic acid (PLA) in contact with non-fatty foods. OLA8 is intended to be used at up to 5% and 15% w/w with or without starch, respectively (or with other additives with similar function). The migration for 10 days at 40°C from the film without starch was 0.16 mg/kg in 10% ethanol and 0.01 mg/kg in 3% acetic acid, while from the film with the starch it was well above 0.05 mg/kg food in all simulants. Some of the testing conditions were inconsistently reported. The substance did not induce gene mutations in bacterial cells and did not induce structural chromosomal aberrations or polyploidy in mammalian cells, thus, does not raise concern for genotoxicity. Instead of providing a 90-day oral toxicity study, a hydrolysis study in ■■■■■ was submitted to read-across from the authorised starting substances, ■■■■■ and the ■■■■■. However, the data provided did not allow to perform the read-across, thus no appropriate toxicological data were provided to support migration above 0.05 mg/kg food (including for contact with 10% ethanol and use in combination with starch). The Panel concluded that OLA8 does not raise a safety concern for the consumer if it is used as an additive at up to 15% w/w in the manufacture of PLA articles that do not contain starch (and other additives with similar function), that are intended to be in contact for 10 days at 40°C with foods simulated by 3% acetic acid and from which the migration does not exceed 0.05 mg/kg food.

6.
EFSA J ; 21(2): e07761, 2023 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-36743686

RESUMO

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP Panel) assessed the safety of the 'waxes, paraffinic, refined, derived from petroleum-based or synthetic hydrocarbon feedstock, low viscosity' (FCM No. 93), for which the uses were requested to be extended for articles in contact with fatty foods. Migration from low-density polyethylene samples containing 1% w/w of a representative wax was tested in food simulants. In fatty food simulants, the migration of mineral oil saturated hydrocarbons (MOSH) ≤ C35 was 142 mg/kg food, exceeding the overall migration limit for plastic FCM. Mineral oil aromatic hydrocarbons (MOAH) with at least two rings are largely removed during the manufacturing process. Based on various lines of evidence, the Panel concluded that any concern for the potential presence of MOAH with two or more conjugated aromatic rings can be ruled out. Based on the genotoxicity studies and on the content of polycyclic aromatic hydrocarbons (PAHs), the substance does not raise a concern for genotoxicity. Available toxicokinetic data showed a limited accumulation of MOSH. No adverse effects were observed up to the highest tested dose of 9 g/kg body weight per day in a 90-day repeated oral toxicity study in Sprague-Dawley rats. The available results showed that FCM No. 93 is devoid of endocrine activity. The provided information on chronic toxicity and carcinogenicity was limited and inadequate to reach conclusions on these endpoints. Therefore, the CEP Panel concluded that under the intended and tested conditions of uses, the substance does not raise safety concern for the consumer if used to a level ensuring that its migration into food is no more than 5 mg/kg.

7.
EFSA J ; 20(10): e07577, 2022 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-36274980

RESUMO

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process Loop Polymers (EU register number RECYC252). The input consists of polyethylene (PE) and polypropylene (PP) offcuts and scrap from the production of food contact packaging that has not been in contact with food, but carry coatings, ink systems and adhesives. Decontaminated material is intended to be used to produce new articles for their original application. The Panel considered critical the management system put in place to provide full traceability from input to the final product, the material review before processing, as well as the removal of coatings, ink systems and adhesives during recycling. The CEP Panel considered that the applicant did not demonstrate that coatings, ink systems and adhesives were adequately removed during the process. Consequently, it concluded that the applicant has not demonstrated that the recycling process is able to reduce the contamination of the PE or PP recyclate to a concentration that does not pose a risk to human health.

8.
EFSA J ; 20(8): e07477, 2022 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-35978620

RESUMO

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process LOGIFRUIT (EU register number RECYC260). The input consists of pre-washed high-density polyethylene (HDPE) or polypropylene (PP) crates from closed and controlled food distribution loops. The process separates crates by material type. Crates are ground to flakes, possibly extruded to pellets and used by companies approved to be in the loop to manufacture new crates. The Panel considered that the quality management system (QAS) put in place to ensure compliance of the origin of the input with Commission Regulation (EC) No 282/2008 and to provide full traceability is critical. The Panel concluded that, when run under the conditions described, the input of the process LOGIFRUIT exclusively originates from product loops which are in closed and controlled chains. The process is designed to ensure that only crates intended for food contact are used and that contamination other than by food can be ruled out. Therefore, the recycling process LOGIFRUIT to produce HDPE and PP crates to be used in contact with fruits and vegetables, and packed meat and fish, dairy, bakery and pastry products is not of safety concern.

9.
EFSA J ; 20(8): e07461, 2022 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-35978624

RESUMO

The food enzyme chymosin (EC 3.4.23.4) is produced with the genetically modified Kluyveromyces lactis strain CIN by DSM Food Specialties B.V. The genetic modifications do not give rise to safety concerns. The food enzyme is free from viable cells of the production organism and its recombinant DNA. It is intended to be used in milk processing for cheese production and for the production of fermented milk products. Dietary exposure was estimated to be up to 0.73 mg total organic solids (TOS)/kg body weight (bw) per day in European populations. Genotoxicity tests did not raise a safety concern. The systemic toxicity was assessed by means of a repeated dose 90-day oral toxicity study in rats. The Panel identified a no observed adverse effect level of 1,000 mg TOS/kg bw per day, the highest dose tested, which when compared with the estimated dietary exposure, results in a margin of exposure of at least 1,300. Similarity of the amino acid sequence of the food enzyme to those of known allergens was searched for and four matches were found. The Panel considered that under the intended conditions of use the risk of allergic sensitisation and elicitation reactions by dietary exposure, although unlikely, cannot be excluded, particularly for individuals sensitised to cedar pollen allergens. Based on the data provided, the Panel concluded that this food enzyme does not give rise to safety concerns under the intended conditions of use.

10.
EFSA J ; 20(6): e07384, 2022 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-35784820

RESUMO

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process Cajas y Palets en una Economia Circular (CAPEC) (EU register number RECYC242). The input consists of crates made of high-density polyethylene (HDPE) or polypropylene (PP) originating from closed and controlled product loops for the packaging of whole fruits and vegetables. Flakes or pellets are produced that will be used by manufacturers of new crates for food contact. The Panel considered that the management system put in place to ensure compliance of the origin of the input with Commission Regulation (EC) No 282/2008 and to provide full traceability from input to final product is the critical process step. It concluded that the input of the process CAPEC originates from product loops which are in closed and controlled chains designed to ensure that only materials and articles that have been intended for food contact are used and that contamination can be ruled out when run under the conditions described by the applicant. The recycling process CAPEC is therefore suitable to produce recycled HDPE and PP crates intended to be used in contact with fruits and vegetables.

11.
Artigo em Inglês | MEDLINE | ID: mdl-35724341

RESUMO

European and French populations are overexposed to cadmium (Cd) through their foods. The risk of increased cadmium exposure for consumers needs to be limited by reduced maximum limits (ML) for novel foodstuffs such as edible seaweed in France. The objective was to derive a low and protective cadmium concentration in edible seaweeds to limit cadmium overexposure in consumers. To do so, we applied a probabilistic approach to the data collected on French seaweed consumers, taking into account other sources of exposure for cadmium. This approach led to the identification of a cadmium concentration which should ensure that the seaweed-consuming population does not exceed the tolerable daily intake (TDI) of cadmium according to a probability of cases, when simultaneously exposed to other cadmium dietary sources. Considering the 5% of the population exceeding TDI, the estimated ML is equal to 0.35 mg Cd kg-1 dry matter of seaweed as an unprocessed food with a 95% confidence interval of [0.18,1.09]. The proposed approach is generic and could be applied to other relevant food/substance pairs when considering the setting of MLs in the regulatory system. It ensures better protection of consumer health.


Assuntos
Cádmio , Alga Marinha , Cádmio/análise , Dieta , Contaminação de Alimentos/análise , Medição de Risco , Verduras
12.
EFSA J ; 20(5): e07231, 2022 May.
Artigo em Inglês | MEDLINE | ID: mdl-35592023

RESUMO

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids was requested by the European Commission to re-evaluate the risks to public health related to the presence of plasticisers such as phthalates, structurally similar substances and replacement substances, as a consequence of migration from food contact materials (FCMs). As the first part of the two-part mandate, EFSA was tasked with identifying and prioritising those plasticisers used in FCMs that may warrant further data collection and eventual risk assessment. Close collaboration with the European Chemicals Agency (ECHA) was requested in the mandate. Substances potentially used as plasticisers were identified using Annex II of the mandate, ECHA's PLASI inventory, the Plastics Regulation and the Regenerated Cellulose Film Directive, the ECHA database, the ECHA grouping approach, and consultation with the Member States. Only substances authorised for FCMs at EU or at national level were prioritised. Five substances classified either as carcinogenic, mutagenic, toxic to reproduction Cat. 1 (under CLP) or as endocrine disruptors, persistent, bioaccumulative and toxic, very persistent/very bioaccumulative (under REACH) were placed into an 'exclusion group'. Prioritisation was based on the date of the most recent risk assessment in the context of FCM, with substances assessed before 2001 being placed in the high-priority group, substances assessed between 2001 and 2011 in the medium-priority group and substances assessed after 2011 in the low-priority group. For the EU stream, the 76 substances were split into 59 high-, 14 medium- and 3 low-priority substances. For the nationally authorised stream, the split of the 72 substances is 66, 3 and 3, respectively. The outcome of follow-up calls for data in support of the exposure assessment will be used for a final ranking.

13.
EFSA J ; 20(3): e07171, 2022 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-35281648

RESUMO

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids assessed the safety of the substance bleached cellulose pulp, consisting of cellulose fibres (70-92%) and hemicellulose (8-30%) obtained from pine and spruce wood. The substance is intended to be used ■■■■■ in polyethylene and polypropylene food contact materials. The final articles are intended to be used for all food types and for long-term storage at room temperature, with or without a short time at higher temperature, including hot-fill. Low-density polyethylene samples containing ■■■■■ of the substance were subjected to a broad set of migration tests with food simulants and extraction tests with dichloromethane. The limits of detection ranged from ■■■■■ (when specified). The Panel noted that they do not ensure the detection of genotoxic substances at a concentration leading to a human exposure above the Threshold of Toxicological Concern. Moreover, not all possibly migrating substances were identified or amenable to the analytical methods applied. No toxicological data were provided for the substance itself, as its migration into food is not expected. The safety of the potentially migrating substances of low molecular mass detected was addressed individually and was considered adequate. However, the Panel considered this approach insufficient owing to a substantial fraction of unidentified components. The Panel concluded that the information provided by the applicant does not allow the safety assessment of the substances below 1,000 Da from bleached cellulose pulp from pine and spruce wood used in plastic food contact materials potentially migrating into food. Therefore, the Panel could not conclude on the safety of the use of bleached cellulose pulp from pine and spruce wood as a plastic additive.

14.
EFSA J ; 20(1): e07020, 2022 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-35079282

RESUMO

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process Srichakra Polyplast (EU register number RECYC229), which uses the Starlinger iV+ technology. The input is hot caustic washed and dried poly(ethylene terephthalate) (PET) flakes mainly originating from collected post-consumer PET containers, with no more than 5% PET from non-food consumer applications. The flakes are dried and crystallised in a first reactor, then extruded into pellets. These pellets are crystallised, preheated and treated in a solid-state polycondensation (SSP) reactor. Having examined the challenge test provided, the Panel concluded that the drying and crystallisation (step 2), extrusion and crystallisation (step 3) and SSP (step 4) are critical in determining the decontamination efficiency of the process. The operating parameters to control the performance of these critical steps are temperature, air flow and residence time for the drying and crystallisation step, and temperature, pressure and residence time for the extrusion and crystallisation step as well as the SSP step. It was demonstrated that this recycling process is able to ensure that the level of migration of potential unknown contaminants into food is below the conservatively modelled migration of 0.1 µg/kg food. Therefore, the Panel concluded that the recycled PET obtained from this process is not of safety concern when used at up to 100% for the manufacture of materials and articles for contact with all types of foodstuffs for long-term storage at room temperature, with or without hotfill. The final articles made of this recycled PET are not intended to be used in microwave and conventional ovens and such uses are not covered by this evaluation.

15.
EFSA J ; 19(11): e06947, 2021 Nov.
Artigo em Inglês | MEDLINE | ID: mdl-34849172

RESUMO

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process deSter (EU register number RECYC196). The input consists of catering tableware food contact articles from airline on-board services, made of polypropylene (PP), polyethylene terephthalate (PET), styrene acrylonitrile resin (SAN) or acrylonitrile butadiene styrene (ABS). The recyclate produced by deSter will be used to manufacture articles for the same on-board services. The Panel considered that the management system put in place to ensure compliance of the origin of the input with Commission Regulation (EC) No 282/2008 and to provide full traceability from input to final product is the critical process step. The process deSter uses only materials and articles intended for food contact and ensures that any contamination can be ruled out, since the input originates from this product loop managed in a closed and controlled chain. Therefore, the Panel concluded that the recycled materials obtained from this process and used within this loop are not of safety concern, when used at up to 100% for the manufacture of plastic tableware for contact with all types of foodstuffs under the conditions of use of the articles before recycling.

16.
EFSA J ; 18(10): e06247, 2020 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-33133270

RESUMO

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) was requested by the European Commission to re-evaluate the safety of styrene (FCM No 193) for use in plastic food contact materials (FCM) following the classification by the International Agency for Research on Cancer (IARC) as 'probably carcinogenic to humans'. The IARC Monograph pertains to hazard identification, based on studies on high-dose occupational exposures by inhalation and animal studies, also mainly by inhalation. The Panel considered that the IARC conclusions cannot be directly applied to the evaluation of risks for consumers from the oral exposure to styrene, but also concluded that, based on the data provided in the IARC Monograph and by the industry, a concern for genotoxicity associated with oral exposure to styrene cannot be excluded. The migration of styrene into foods packed in styrenic plastics is below 10 µg/kg for the majority of the foods, but up to 230 µg/kg was reported. Migration tends to be high for contact with fatty foods, and/or with high surface to volume ratios of the FCM. Dietary exposure of the consumers to styrene migrating from styrenic plastics was estimated in the order of 0.1 µg/kg body weight (bw) per day. It is in the same range as exposure from styrene present in foods as such. The dietary exposure (food component plus migration from styrenic plastics) is similar or lower than that by inhalation in the general population. Taking the human exposure data into account, the Panel concluded that a systematic review of genotoxicity and mechanistic data, comparative toxicokinetics and analysis of species differences is required for assessing the safety of styrene for its use in FCM.

17.
EFSA J ; 18(6): e06124, 2020 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-32874315

RESUMO

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) was requested by the European Commission to review the substances for which a Specific Migration Limit (SML) is not assigned in Regulation (EU) No 10/2011. These substances had been covered by the Generic SML of 60 mg/kg food, but with Regulation (EU) 2016/1416 it was removed, necessitating their re-examination. EFSA was requested to identify those substances requiring an SML to ensure the authorisation is sufficiently protective to health, grouping them in high, medium and low priority to serve as the basis for future re-evaluations of individual substances. The CEP Panel established a stepwise procedure. This took into account existing hazard assessments for each substance on carcinogenicity/mutagenicity/reprotoxicity (CMR), bioaccumulation and endocrine disruptor (ED) properties along with the use of in silico generated predictions on genotoxicity. Molecular weights and boiling points were considered with regard to their effect on potential consumer exposure. This prioritisation procedure was applied to a total of 451 substances, from which 78 substances were eliminated at the outset, as they had previously been evaluated by EFSA as food contact substances. For 89 substances, the Panel concluded that a migration limit should not be needed. These are in the lists 0 and 1 of the Scientific Committee for Food (SCF), defined as substances for which an Acceptable Daily Intake (ADI) does not need to be established, along with substances that are controlled by existing restrictions and/or generic limits. Of the remaining 284 substances, 179 were placed into the low priority group, 102 were placed into the medium priority group and 3 were placed into the high priority group, i.e. salicylic acid (FCM No 121), styrene (FCM No 193) and lauric acid, vinyl ester (FCM No 436).

18.
Food Chem Toxicol ; 137: 111130, 2020 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-31945394

RESUMO

Usually health risk related to food contaminants is assessed based on consumption data collected on a few days. Consequently, this approach considers neither the evolution of exposures over time nor the potential accumulation of the substance. The aim of the present study was to develop a method to assess lifetime dietary risk due to cadmium exposure. Three methods were compared, respectively based on age, dietary pattern and sociodemographic characteristics. Additionally, exposure trajectories were converted into cadmium body burden trajectories using a PBTK-TD model ultimately predicting the occurrence of renal effects. It was shown that dietary exposures to cadmium, as well as exceedances of health based guidance values, greatly vary with age and individual profiles. The developed methods allowed identifying parameters affecting dietary exposure to cadmium and distinguishing at-risk subpopulations. Furthermore, this study demonstrated that it is necessary to consider individual changes through life and kinetic of the substance to assess risk properly.


Assuntos
Cádmio/sangue , Cádmio/urina , Exposição Dietética/efeitos adversos , Medição de Risco/métodos , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Cádmio/toxicidade , Criança , Pré-Escolar , Feminino , Contaminação de Alimentos/análise , Humanos , Lactente , Rim/efeitos dos fármacos , Rim/metabolismo , Masculino , Pessoa de Meia-Idade , Toxicocinética , Adulto Jovem
19.
Food Chem Toxicol ; 130: 308-316, 2019 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-31102675

RESUMO

A total diet study (TDS) was conducted between 2010 and 2016 to assess the risk associated with chemicals in food of non-breast-fed children from 1 to 36 months living in France. Food samples were collected, prepared "as consumed", and analyzed for chemicals of public health interest. Acrylamide, furan and polycyclic aromatic hydrocarbons (PAHs) were analyzed as heat-induced compounds produced mainly during thermal processing of foods. Dietary exposure was assessed for 705 representative children using food consumptions recorded through a 3-consecutive-days record. As all calculated margins of exposure (MOE) for PAHs exceeded 10 000, dietary exposure of the infant and toddler population was deemed tolerable with regard to the carcinogenic risk. Conversely, the exposure levels to acrylamide and furan were considered as of concern, requiring management measures to reduce the exposure essentially by reducing the formation of heat-induced compounds during food production or preparation processes. Efforts should mainly focus on major contributors to the exposure, i.e. sweet and savoury biscuits and bars, and potatoes and potato products for acrylamide, baby jars of vegetables, with or without meat or fish for acrylamide and furan.


Assuntos
Acrilamida/química , Armazenamento de Alimentos , Furanos/química , Temperatura Alta , Alimentos Infantis/análise , Hidrocarbonetos Policíclicos Aromáticos/química , Acrilamida/toxicidade , Contaminação de Alimentos , França , Furanos/toxicidade , Humanos , Lactente , Hidrocarbonetos Policíclicos Aromáticos/toxicidade , Fatores de Risco
20.
Regul Toxicol Pharmacol ; 97: 134-143, 2018 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-29932981

RESUMO

The shortage of data on non-intentionally added substances (NIAS) present in food contact material (FCM) limits the ability to ensure food safety. Recent strategies in analytical method development permit NIAS investigation by using chemical exploration, but this has not been sufficiently investigated in risk assessment context. Here, exploration is utilized and followed by risk prioritization on chemical compounds that can potentially migrate to food from two paperboard FCM samples. Concentration estimates from exploration are converted to tentative exposure assessment, while predicted chemical structures are assessed using quantitative structure-activity relationships (QSAR) models for carcinogenicity, mutagenicity, and reproductive toxicity. A selection of 60 chemical compounds from two FCMs is assessed by four risk assessors to classify compounds based on probable risk. For almost 60% of cases, the assessors classified compounds as either high priority or low priority. Unclassified compounds are due to disagreements between experts (18%) or due to a perceived lack of data (23%). Among the high priority substances are high-concentration compounds, benzophenone derivatives, and dyes. The low priority compounds contained e.g. oligomers from plasticizers and linear alkane amides. The classification scheme provides valuable information based on tentative data and is able to prioritize discovered chemical compounds for pending risk assessment.


Assuntos
Contaminação de Alimentos/análise , Inocuidade dos Alimentos , Embalagem de Alimentos , Humanos , Relação Quantitativa Estrutura-Atividade , Medição de Risco , Incerteza
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA