Immunotoxic, genotoxic, and endocrine disrupting impacts of polyamide microplastic particles and chemicals.

Due to their exceptional properties and cost effectiveness, polyamides or nylons have emerged as widely used materials, revolutionizing diverse industries, including industrial 3D printing or additive manufacturing (AM). Powder-based AM technologies employ tonnes of polyamide microplastics to produce complex components every year. However, the lack of comprehensive toxicity assessment of particulate polyamides and polyamide-associated chemicals, especially in the light of the global microplastics crisis, calls for urgent action. This study investigated the physicochemical properties of polyamide-12 microplastics used in AM, and assessed a number of toxicity endpoints focusing on inflammation, immunometabolism, genotoxicity, aryl hydrocarbon receptor (AhR) activation, endocrine disruption, and cell morphology. Specifically, microplastics examination by means of field emission scanning electron microscopy revealed that work flow reuse of material created a fraction of smaller particles with an average size of 1-5 µm, a size range readily available for uptake by human cells. Moreover, chemical analysis by means of gas chromatography high-resolution mass spectrometry detected several polyamide-associated chemicals including starting material, plasticizer, thermal stabilizer/antioxidant, and migrating slip additive. Even if polyamide particles and chemicals did not induce an acute inflammatory response, repeated and prolonged exposure of human primary macrophages disclosed a steady increase in the levels of proinflammatory chemokine Interleukin-8 (IL-8/CXCL-8). Moreover, targeted metabolomics disclosed that polyamide particles modulated the kynurenine pathway and some of its key metabolites. The p53-responsive luciferase reporter gene assay showed that particles per se were able to activate p53, being indicative of a genotoxic stress. Polyamide-associated chemicals triggered moderate activation of AhR and elicited anti-androgenic activity. Finally, a high-throughput and non-targeted morphological profiling by Cell Painting assay outlined major sites of bioactivity of polyamide-associated chemicals and indicated putative mechanisms of toxicity in the cells. These findings reveal that the increasing use of polyamide microplastics may pose a potential health risk for the exposed individuals, and it merits more attention.

Altered insulin sensitivity and immune function in patients with colorectal cancer.

BACKGROUND & AIMS: Insulin resistance and chronic inflammation have been reported in patients with cancer. However, many of the underlying mechanisms and associations are yet to be unveiled. We examined both the level of insulin sensitivity and markers of inflammation in patients with colorectal cancer for comparison to controls. METHODS: Clinical exploratory study of patients with colorectal cancer (n = 20) and matched controls (n = 10). Insulin sensitivity was quantified using the hyperinsulinemic normoglycemic clamp and blood samples were taken for quantification of several key, both intra- and extracellular, inflammatory markers. We analysed the differences in these parameters between the two groups. RESULTS: Patients exhibited both insulin resistance (M-value, patients median (Mdn) 4.57 interquartile range (IQR) 3.49-5.75; controls Mdn 5.79 (IQR 5.20-6.81), p = 0.049), as well as increased plasma levels of the pro-inflammatory cytokines IL-1ß (patients Mdn 0.48 (IQR 0.33-0.58); controls Mdn 0.36 (IQR 0.29-0.42), p = 0.02) and IL-6 (patients Mdn 3.21 (IQR 2.31-4.93); controls Mdn 2.16 (IQR 1.50-2.65), p = 0.02). The latter is present despite an almost two to three fold decrease (p < 0.01) in caspase-1 activity, a facilitating enzyme of IL-1ß production, within circulating immune cells. CONCLUSION: Patients with colorectal cancer displayed insulin resistance and higher levels of plasma IL-1ß and IL-6, in comparison to matched healthy controls. The finding of a seemingly disconnect between inflammasome (caspase-1) activity and plasma levels of key pro-inflammatory cytokines in cancer patients may suggest that, in parallel to dysregulated immune cells, tumour-driven inflammatory pathways also are in effect.

Mathematical models disentangle the role of IL-10 feedbacks in human monocytes upon proinflammatory activation.

Inflammation is one of the vital mechanisms through which the immune system responds to harmful stimuli. During inflammation, proinflammatory and anti-inflammatory cytokines interplay to orchestrate fine-tuned and dynamic immune responses. The cytokine interplay governs switches in the inflammatory response and dictates the propagation and development of the inflammatory response. Molecular pathways underlying the interplay are complex, and time-resolved monitoring of mediators and cytokines is necessary as a basis to study them in detail. Our understanding can be advanced by mathematical models that enable to analyze the system of interactions and their dynamical interplay in detail. We, therefore, used a mathematical modeling approach to study the interplay between prominent proinflammatory and anti-inflammatory cytokines with a focus on tumor necrosis factor and interleukin 10 (IL-10) in lipopolysaccharide-primed primary human monocytes. Relevant time-resolved data were generated by experimentally adding or blocking IL-10 at different time points. The model was successfully trained and could predict independent validation data and was further used to perform simulations to disentangle the role of IL-10 feedbacks during an acute inflammatory event. We used the insight to obtain a reduced predictive model including only the necessary IL-10-mediated feedbacks. Finally, the validated reduced model was used to predict early IL-10-tumor necrosis factor switches in the inflammatory response. Overall, we gained detailed insights into fine-tuning of inflammatory responses in human monocytes and present a model for further use in studying the complex and dynamic process of cytokine-regulated acute inflammation.

Silica Exposure and Cardiovascular, Cerebrovascular, and Respiratory Morbidity in a Cohort of Male Swedish Iron Foundry Workers.

OBJECTIVE: We present quantitative exposure-response data on silica exposure in male Swedish iron foundry workers for cardiovascular, cerebrovascular, and respiratory morbidity. METHODS: This research is a cohort study of 2063 male Swedish iron foundry workers. From the Swedish National Patient Registers, data on morbidity incidence were retrieved. A historical measurement database of 1667 respirable silica exposure measurements from 10 Swedish iron foundries was used to calculate the cumulative exposure dose for each worker. RESULTS: Increased morbidity risk for the whole group of foundry workers was determined for ischemic heart disease, cerebrovascular disease, chronic obstructive pulmonary disease (COPD), bronchitis, and pneumonia. In addition, an increased risk for COPD at cumulative silica exposures ranging from 0.11 to 0.84 mg/m 3 year is presented. CONCLUSIONS: The study presents a significantly increased COPD risk at cumulative silica exposures below the Swedish occupational exposure limit.

Occupational quartz and particle exposure affect systemic levels of inflammatory markers related to inflammasome activation and cardiovascular disease.

BACKGROUND: The inflammatory responses are central components of diseases associated with particulate matter (PM) exposure, including systemic diseases such as cardiovascular diseases (CVDs). The aim of this study was to determine if exposure to PM, including respirable dust or quartz in the iron foundry environment mediates systemic inflammatory responses, focusing on the NLRP3 inflammasome and novel or established inflammatory markers of CVDs. METHODS: The exposure to PM, including respirable dust, metals and quartz were determined in 40 foundry workers at two separate occasions per worker. In addition, blood samples were collected both pre-shift and post-shift and quantified for inflammatory markers. The respirable dust and quartz exposures were correlated to levels of inflammatory markers in blood using Pearson, Kendall τ and mixed model statistics. Analyzed inflammatory markers included: 1) general markers of inflammation, including interleukins, chemokines, acute phase proteins, and white blood cell counts, 2) novel or established inflammatory markers of CVD, such as growth/differentiation factor-15 (GDF-15), CD40 ligand, soluble suppressor of tumorigenesis 2 (sST2), intercellular/vascular adhesion molecule-1 (ICAM-1, VCAM-1), and myeloperoxidase (MPO), and 3) NLRP3 inflammasome-related markers, including interleukin (IL)-1ß, IL-18, IL-1 receptor antagonist (IL-1Ra), and caspase-1 activity. RESULTS: The average respirator adjusted exposure level to respirable dust and quartz for the 40 foundry workers included in the study was 0.65 and 0.020 mg/m3, respectively. Respirable quartz exposure correlated with several NLRP3 inflammasome-related markers, including plasma levels of IL-1ß and IL-18, and several caspase-1 activity measures in monocytes, demonstrating a reverse relationship. Respirable dust exposure mainly correlated with non-inflammasome related markers like CXCL8 and sST2. CONCLUSIONS: The finding that NLRP3 inflammasome-related markers correlated with PM and quartz exposure suggest that this potent inflammatory cellular mechanism indeed is affected even at current exposure levels in Swedish iron foundries. The results highlight concerns regarding the safety of current exposure limits to respirable dust and quartz, and encourage continuous efforts to reduce exposure in dust and quartz exposed industries.

A Novel Nanosafety Approach Using Cell Painting, Metabolomics, and Lipidomics Captures the Cellular and Molecular Phenotypes Induced by the Unintentionally Formed Metal-Based (Nano)Particles.

Additive manufacturing (AM) or industrial 3D printing uses cutting-edge technologies and materials to produce a variety of complex products. However, the effects of the unintentionally emitted AM (nano)particles (AMPs) on human cells following inhalation, require further investigations. The physicochemical characterization of the AMPs, extracted from the filter of a Laser Powder Bed Fusion (L-PBF) 3D printer of iron-based materials, disclosed their complexity, in terms of size, shape, and chemistry. Cell Painting, a high-content screening (HCS) assay, was used to detect the subtle morphological changes elicited by the AMPs at the single cell resolution. The profiling of the cell morphological phenotypes, disclosed prominent concentration-dependent effects on the cytoskeleton, mitochondria, and the membranous structures of the cell. Furthermore, lipidomics confirmed that the AMPs induced the extensive membrane remodeling in the lung epithelial and macrophage co-culture cell model. To further elucidate the biological mechanisms of action, the targeted metabolomics unveiled several inflammation-related metabolites regulating the cell response to the AMP exposure. Overall, the AMP exposure led to the internalization, oxidative stress, cytoskeleton disruption, mitochondrial activation, membrane remodeling, and metabolic reprogramming of the lung epithelial cells and macrophages. We propose the approach of integrating Cell Painting with metabolomics and lipidomics, as an advanced nanosafety methodology, increasing the ability to capture the cellular and molecular phenotypes and the relevant biological mechanisms to the (nano)particle exposure.

Particle Safety Assessment in Additive Manufacturing: From Exposure Risks to Advanced Toxicology Testing.

Additive manufacturing (AM) or industrial three-dimensional (3D) printing drives a new spectrum of design and production possibilities; pushing the boundaries both in the application by production of sophisticated products as well as the development of next-generation materials. AM technologies apply a diversity of feedstocks, including plastic, metallic, and ceramic particle powders with distinct size, shape, and surface chemistry. In addition, powders are often reused, which may change the particles' physicochemical properties and by that alter their toxic potential. The AM production technology commonly relies on a laser or electron beam to selectively melt or sinter particle powders. Large energy input on feedstock powders generates several byproducts, including varying amounts of virgin microparticles, nanoparticles, spatter, and volatile chemicals that are emitted in the working environment; throughout the production and processing phases. The micro and nanoscale size may enable particles to interact with and to cross biological barriers, which could, in turn, give rise to unexpected adverse outcomes, including inflammation, oxidative stress, activation of signaling pathways, genotoxicity, and carcinogenicity. Another important aspect of AM-associated risks is emission/leakage of mono- and oligomers due to polymer breakdown and high temperature transformation of chemicals from polymeric particles, both during production, use, and in vivo, including in target cells. These chemicals are potential inducers of direct toxicity, genotoxicity, and endocrine disruption. Nevertheless, understanding whether AM particle powders and their byproducts may exert adverse effects in humans is largely lacking and urges comprehensive safety assessment across the entire AM lifecycle-spanning from virgin and reused to airborne particles. Therefore, this review will detail: 1) brief overview of the AM feedstock powders, impact of reuse on particle physicochemical properties, main exposure pathways and protective measures in AM industry, 2) role of particle biological identity and key toxicological endpoints in the particle safety assessment, and 3) next-generation toxicology approaches in nanosafety for safety assessment in AM. Altogether, the proposed testing approach will enable a deeper understanding of existing and emerging particle and chemical safety challenges and provide a strategy for the development of cutting-edge methodologies for hazard identification and risk assessment in the AM industry.

Cytokine responses to LPS in reprogrammed monocytes are associated with the transcription factor PU.1.

Myeloid-derived suppressor cells (MDSCs) are functionally immunosuppressive cells that arise and expand during extensive inflammatory conditions by increased hematopoietic output or reprogramming of immune cells. In sepsis, an increase of circulating MDSCs is associated with adverse outcomes, but unique traits that can be used to identify increased activity of MDSCs are lacking. By using endotoxin tolerance as a model of sepsis-induced monocytic MDSCs (M-MDSC-like cells), this study aims to identify the mediator and transcriptional regulator profile associated with M-MDSC activity. After analyzing 180 inflammation-associated proteins, a profile of differentially expressed cytokines was found in M-MDSC-like cells versus normal monocytes stimulated with LPS. These cytokines were associated with 5 candidate transcription factors, where particularly PU.1 showed differential expression on both transcriptional and protein levels in M-MDSC-like cells. Furthermore, inhibition of PU.1 led to increased production of CXCL5 and CCL8 in M-MDSC-like cells indicating its role in regulating the ability of M-MDSC-like cells to recruit other immune cells. Taken together, the study identifies a unique profile in the pattern of immune mediators defining M-MDSC activity upon LPS stimulation, which offers a functional link to their contribution to immunosuppression.

Differential cytokine response in endotoxin induced M-MDSC-like cells and their associated regulators.

Toxicity evaluation of particles formed during 3D-printing: Cytotoxic, genotoxic, and inflammatory response in lung and macrophage models.

Additive manufacturing (AM) or "3D-printing" is a ground-breaking technology that enables the production of complex 3D parts. Its rapid growth calls for immediate toxicological investigations of possible human exposures in order to estimate occupational health risks. Several laser-based powder bed fusion AM techniques are available of which many use metal powder in the micrometer range as feedstock. Large energy input from the laser on metal powders generates several by-products, like spatter and condensate particles. Due to often altered physicochemical properties and composition, spatter and condensate particles can result in different toxicological responses compared to the original powder particles. The toxicity of such particles has, however, not yet been investigated. The aim of the present study was to investigate the toxicity of condensate/spatter particles formed and collected upon selective laser melting (SLM) printing of metal alloy powders, including a nickel-chromium-based superalloy (IN939), a nickel-based alloy (Hastelloy X, HX), a high-strength maraging steel (18Ni300), a stainless steel (316L), and a titanium alloy (Ti6Al4V). Toxicological endpoints investigated included cytotoxicity, generation of reactive oxygen species (ROS), genotoxicity (comet and micronucleus formation), and inflammatory response (cytokine/chemokine profiling) following exposure of human bronchial epithelial cells (HBEC) or monocytes/macrophages (THP-1). The results showed no or minor cytotoxicity in the doses tested (10-100 µg/mL). Furthermore, no ROS generation or formation of micronucleus was observed in the HBEC cells. However, an increase in DNA strand breaks (detected by comet assay) was noted in cells exposed to HX, IN939, and Ti6Al4V, whereas no evident release of pro-inflammatory cytokine was observed from macrophages. Particle and surface characterization showed agglomeration in solution and different surface oxide compositions compared to the nominal bulk content. The extent of released nickel was small and related to the nickel content of the surface oxides, which was largely different from the bulk content. This may explain the limited toxicity found despite the high Ni bulk content of several powders. Taken together, this study suggests relatively low acute toxicity of condensates/spatter particles formed during SLM-printing using IN939, HX, 18Ni300, 316L, and Ti6Al4V as original metal powders.

Dose- and time-dependent changes in viability and IL-6, CXCL8 and CCL2 production by HaCaT-cells exposed to cobalt. Effects of high and low calcium growth conditions.

BACKGROUND: Sensitization requires exposure to an allergen with subsequent production of a "danger "signal. In the skin, keratinocytes are the main producers of these signals. OBJECTIVE: To compare dose- and time-effects of cobalt on the viability of and cytokine release from HaCaT cells cultured at low or high calcium. METHOD: To model two separate states of differentiation of keratinocytes, HaCaT cells were cultured under low or high calcium conditions. HaCaT were exposed to different concentrations of cobalt chloride (10 µm to 5 mM) over time (30 minutes- 48 hours). Cell viability was measured with the Cell-Titer Blue Viability assay. Cytokine production was measured using a bead-based immunoassay and flow cytometry. Gene expression was quantified using qPCR. Data was analyzed by ANOVA and linear mixed model. RESULTS: Viability of the cells was dose- and time-dependent. A linear mixed statistical model showed that cobalt exposure induces increase in IL-6, CXCL8 and CCL2 production over time and whereas increase of IL-6 and a decrease of CCL2 was associated with increasing cobalt chloride concentrations. When comparing the cells incubated under high and low calcium conditions, the more differentiated cells in the high concentration were found to exert a stronger response in terms of IL-6 release. CONCLUSIONS: Our data suggest that cobalt chloride triggered an alarm system in HaCaT cells, and proinflammatory cytokines/chemokines were secreted in a dose- and time-dependent manner. When high and low calcium incubations were compared, the difference was seen only for IL-6. These findings indicate that the effect of cobalt chloride on cell toxicity occurs throughout the living epidermis.

Molecularly Distinct NLRP3 Inducers Mediate Diverse Ratios of Interleukin-1ß and Interleukin-18 from Human Monocytes.

Inflammasomes cleave and activate interleukin- (IL-) 1ß and IL-18 which have both shared and unique biological functions. IL-1ß is an important mediator of the acute phase response to infections and tissue damage, whereas IL-18 takes part in activation and tailoring of the adaptive immune response. While IL-1ß has served as the prototypic indicator of inflammasome activation, few studies have compared the potential differences in IL-1ß and IL-18 production during inflammasome activation. Since these cytokines partake in different immune pathways, the involvement of inflammasome activity in different conditions needs to be described beyond IL-1ß production alone. To address a potential heterogeneity in inflammasome functionality, ATP, chitosan, or silica oxide (SiO2) were used to induce NLRP3 inflammasome activation in THP-1 cells and the subsequent outcomes were quantified. Despite using doses of the inflammasome inducers yielding similar release of IL-1ß, SiO2-stimulated cells showed a lower concentration of released IL-18 compared to ATP and chitosan. Hence, the cells stimulated with SiO2 responded with a distinctly different IL-18 : IL-1ß ratio. The difference in the IL-18 : IL-1ß ratio for SiO2 was constant over different doses. While all downstream responses were strictly dependent on a functional NLRP3 inflammasome, the differences did not depend on the level of gene expression, caspase-1 activity, or pyroptosis. We suggest that the NLRP3 inflammasome response should be considered a dynamic process, which can be described by taking the ratio between IL-1ß and IL-18 into account and moving away from an on/off perspective of inflammasome activation.

Quartz Dust Exposure Affects NLRP3 Inflammasome Activation and Plasma Levels of IL-18 and IL-1Ra in Iron Foundry Workers.

PURPOSE: To study the association between inhalation of particulate matter or quartz in Swedish iron foundries and the effects on NLRP3 inflammasome activation. METHODS: Particle exposure measurements were performed during an eight-hour work day for 85 foundry workers at three Swedish iron foundries. Personal sampling was used for measurement of respirable quartz and dust and stationary measurements to obtain exposure measurements for inhalable dust and PM10. The NLRP3 inflammasome markers, interleukin- (IL-) 1ß and IL-18, and inhibitors IL-1 receptor antagonist (IL-1Ra) and IL-18 binding protein (IL-18BP) were measured in plasma. Inflammasome activation was measured by caspase-1 enzymatic activity in monocytes in whole blood by flow cytometry, and expression of inflammasome-related genes was quantified using real-time PCR. Multiple linear regression analysis was used to investigate associations between PM exposures and inflammatory markers. Sex, age, smoking, current infection, BMI, and single nucleotide polymorphism in the inflammasome regulating genes CARD8 (C10X) and NLRP3 (Q705K) were included as covariates. RESULTS: The average exposure levels of respirable dust and quartz were 0.85 and 0.052 mg/m3, respectively. A significant exposure-response was found for respirable dust and IL-18 and for inhalable dust and IL-1Ra. Whole blood, drawn from study participants, was stimulated ex vivo with inflammasome priming stimuli LPS or Pam3CSK4, resulting in a 47% and 49% increase in caspase-1 enzymatic activity in monocytes. This increase in caspase-1 activity was significantly attenuated in the higher exposure groups for most PM exposure measures. CONCLUSIONS: The results indicate that exposure levels of PM in the iron foundry environment can affect the NLRP3 inflammasome and systemic inflammation.

Respiratory health and inflammatory markers - Exposure to respirable dust and quartz and chemical binders in Swedish iron foundries.

PURPOSE: To study the relationship between respirable dust, quartz and chemical binders in Swedish iron foundries and respiratory symptoms, lung function (as forced expiratory volume FEV1 and vital capacity FVC), fraction of exhaled nitric oxide (FENO) and levels of club cell secretory protein 16 (CC16) and CRP. METHODS: Personal sampling of respirable dust and quartz was performed for 85 subjects in three Swedish iron foundries. Full shift sampling and examination were performed on the second or third day of a working week after a work free weekend, with additional sampling on the fourth or fifth day. Logistic, linear and mixed model analyses were performed including, gender, age, smoking, infections, sampling day, body mass index (BMI) and chemical binders as covariates. RESULTS: The adjusted average respirable quartz and dust concentrations were 0.038 and 0.66 mg/m3, respectively. Statistically significant increases in levels of CC16 were associated with exposure to chemical binders (p = 0.05; p = 0.01) in the regression analysis of quartz and respirable dust, respectively. Non-significant exposure-responses were identified for cumulative quartz and the symptoms asthma and breathlessness. For cumulative chemical years, non-significant exposure-response were observed for all but two symptoms. FENO also exhibited a non significant exposure-response for both quartz and respirable dust. No exposure-response was determined for FEV1 or FVC, CRP and respirable dust and quartz. CONCLUSIONS: Our findings suggest that early markers of pulmonary effect, such as increased levels of CC16 and FENO, are more strongly associated with chemical binder exposure than respirable quartz and dust in foundry environments.

Inflammatory and coagulatory markers and exposure to different size fractions of particle mass, number and surface area air concentrations in Swedish iron foundries, in particular respirable quartz.

PURPOSE: To study the relationship between inhalation of airborne particles and quartz in Swedish iron foundries and markers of inflammation and coagulation in blood. METHODS: Personal sampling of respirable dust and quartz was performed for 85 subjects in three Swedish iron foundries. Stationary measurements were used to study the concentrations of respirable dust and quartz, inhalable and total dust, PM10 and PM2.5, as well as the particle surface area and the particle number concentrations. Markers of inflammation, namely interleukins (IL-1ß, IL-6, IL-8, IL-10 and IL-12), C-reactive protein, and serum amyloid A (SAA) were measured in plasma or serum, together with markers of coagulation including fibrinogen, factor VIII (FVIII), von Willebrand factor and D-dimer. Complete sampling was performed on the second or third day of a working week after a work-free weekend, and follow-up samples were collected 2 days later. A mixed model analysis was performed including sex, age, smoking, infections, blood group, sampling day and BMI as covariates. RESULTS: The average 8-h time-weighted average air concentrations of respirable dust and quartz were 0.85 mg/m3 and 0.052 mg/m3, respectively. Participants in high-exposure groups with respect to some of the measured particle types exhibited significantly elevated levels of SAA, fibrinogen and FVIII. CONCLUSIONS: These observed relationships between particle exposure and inflammatory markers may indicate an increased risk of cardiovascular disease among foundry workers with high particulate exposure.

Activation of the NLRP3 Inflammasome Pathway by Uropathogenic Escherichia coli Is Virulence Factor-Dependent and Influences Colonization of Bladder Epithelial Cells.

The NLRP3 inflammasome and IL-1ß release have recently been suggested to be important for the progression of urinary tract infection (UTI). However, much is still unknown regarding the interaction of UPEC and the NLRP3 inflammasome. The purpose of this study was to elucidate what virulence factors uropathogenic Escherichia coli (UPEC) use to modulate NLRP3 inflammasome activation and subsequent IL-1ß release and the role of NLRP3 for UPEC colonization of bladder epithelial cells. The bladder epithelial cell line 5637, CRISPR/Cas9 generated NLRP3, caspase-1 and mesotrypsin deficient cell lines and transformed primary bladder epithelial cells (HBLAK) were stimulated with UPEC isolates and the non-pathogenic MG1655 strain. We found that the UPEC strain CFT073, but not MG1655, induced an increased caspase-1 activity and IL-1ß release from bladder epithelial cells. The increase was shown to be mediated by α-hemolysin activation of the NLRP3 inflammasome in an NF-κB-independent manner. The effect of α-hemolysin on IL-1ß release was biphasic, initially suppressive, later inductive. Furthermore, the phase-locked type-1-fimbrial ON variant of CFT073 inhibited caspase-1 activation and IL-1ß release. In addition, the ability of CFT073 to adhere to and invade NLRP3 deficient cells was significantly reduced compare to wild-type cells. The reduced colonization of NLRP3-deficient cells was type-1 fimbriae dependent. In conclusion, we found that the NLRP3 inflammasome was important for type-1 fimbriae-dependent colonization of bladder epithelial cells and that both type-1 fimbriae and α-hemolysin can modulate the activity of the NLRP3 inflammasome.

N-acetylcysteine and azithromycin affect the innate immune response in cystic fibrosis bronchial epithelial cells in vitro.

BACKGROUND AND OBJECTIVE: We have previously reported that N-acetylcysteine (NAC), ambroxol and azithromycin (AZM) (partially) correct the chloride efflux dysfunction in cystic fibrosis bronchial epithelial (CFBE) cells with the ΔF508 homozygous mutation in vitro. METHODS: In the present paper, we further investigated possible immunomodulatory effects of these drugs on the regulation of the innate immune system by studying the expression of the cytosolic NOD-like receptors NLRC1 and NLRC2, and interleukin (IL)-6 production in CFBE cells. RESULTS: Under basal conditions, PCR and Western Blot data indicate that the NLRC2 receptor has a reduced expression in CF cells as compared to non-CF (16HBE) cells, but that the NLRC1 expression is the same in both cell lines. AZM significantly upregulated NLRC1 and NLRC2 while NAC upregulated only NLRC2 receptor expression in CF cells. Reduced basal IL-6 production was found in CF cells as compared to non-CF cells. MDP (an NLRC2 agonist), NAC and AZM, but not Tri-DAP (an NLRC1 agonist), increased IL-6 production in CF cells, indicating that in CF cells IL-6 upregulation is independent of NLRC1, but involves the activation of NLRC2. CONCLUSION: Overall, the results indicate that NAC and AZM not only can correct the chloride efflux dysfunction but also have a weakly strengthening effect on the innate immune system.

Human gene variants linked to enhanced NLRP3 activity limit intramacrophage growth of Mycobacterium tuberculosis.

Activation of the NLRP3 inflammasome and subsequent generation of interleukin 1ß is initiated in macrophages upon recognition of several stimuli. In the present work, we show that gain-of-function gene variants of inflammasome components known to predispose individuals to inflammatory disorders have a host-protective role during infection with Mycobacterium tuberculosis. By isolation of macrophages from patients and healthy blood donors with genetic variants in NLRP3 and CARD8 and subsequent infection of the cells with virulent M. tuberculosis, we show that these gene variants, combined, are associated with increased control of bacterial growth in human macrophages.

Cytokine profile in a cohort of healthy blood donors carrying polymorphisms in genes encoding the NLRP3 inflammasome.

BACKGROUND: The NLRP3 inflammasome has been recognized as one of the key components of the innate immunity by sensing a diversity of insults. Inflammasome activation results in the maturation of the pro-inflammatory cytokines interleukin (IL)-1ß and IL-18. Increased production of IL-1ß is found in patients with gain-of-function polymorphisms in genes encoding the NLRP3 inflammasome. Since approximately 5% of the Swedish population are heterozygote carriers of these combined gene variants, their impact on inflammasome status and a relationship on disease development is therefore highly relevant to study. The present study investigates levels of inflammasome-produced cytokines as a measure of inflammasome activation in healthy individuals carrying Q705K polymorphism in the NLRP3 gene combined with C10X in the CARD8 gene. MATERIALS AND METHODS: Genotyping of 1006 healthy blood donors was performed for the polymorphisms Q705K in the NLRP3 and C10X in the CARD8 genes. IL-1ß, IL-18, IL-33, as well as a number of other pro-inflammatory cytokines, were analyzed by Luminex or ELISA in plasma from individuals carrying the polymorphisms and in age and gender matched non-carrier controls. RESULTS & DISCUSSION: The prevalence of the polymorphisms was in line with previous studies. Plasma levels of IL-1ß and IL-33 were elevated among carriers of combined Q705K+C10X polymorphisms compared to controls, whereas no difference was found for IL-18 and the other cytokines measured. Moreover, carriers of C10X or Q705K per se had similar plasma levels of IL-1ß as non-carriers. These data suggest that the combined polymorphisms create inflammasomes with increased basal activation state, which might provide a more favourable innate immune response. In spite of this, it could also represent the mechanisms by which the inflammatory loop is triggered into a long-term inflammatory phenotype.

CARD8 gene encoding a protein of innate immunity is expressed in human atherosclerosis and associated with markers of inflammation.

Inflammation is a key factor in the development of atherosclerotic coronary artery disease. It is promoted through the inflammasome, a molecular machine that produces IL (interleukin)-1ß in response to cholesterol crystal accumulation in macrophages. The CARD8 (caspase recruitment domain 8) protein modulates this process by suppressing caspase 1 and the transcription factor NF-κB (nuclear factor κB). The expression of CARD8 mRNA was examined in atherosclerotic vascular tissue and the impact on MI (myocardial infarction) of a polymorphism in the CARD8 gene determined. CARD8 mRNA was analysed by microarray of human atherosclerotic tissue and compared with transplant donor arterial tissue. Microarray analysis was performed for proximal genes associated with the rs2043211 locus in plaque. The CARD8 rs2043211 polymorphism was analysed by genotyping of two Swedish MI cohorts, FIA (First Myocardial Infarction in Northern Sweden) and SCARF (Stockholm Coronary Atherosclerosis Risk Factor). The CRP (C-reactive protein) level was measured in both cohorts, but the levels of the pro-inflammatory cytokines IL-1ß, IL-18, TNF (tumour necrosis factor) and MCP-1 (monocyte chemoattractant protein) were measured in sera available from the SCARF cohort. CARD8 mRNA was highly expressed in atherosclerotic plaques compared with the expression in transplant donor vessel (P<0.00001). The minor allele was associated with lower expression of CARD8 in the plaques, suggesting that CARD8 may promote inflammation. Carriers of the minor allele of the rs2043211 polymorphism also displayed lower circulating CRP and lower levels of the pro-atherosclerotic chemokine MCP-1. However, no significant association could be detected between this polymorphism and MI in the two cohorts. Genetic alterations in the CARD8 gene therefore seem to be of limited importance for the development of MI.

Propionibacterium acnes activates caspase-1 in human neutrophils.

Propionibacterium acnes is a Gram-positive, slow-growing, anaerobic bacillus, predominantly found as a commensal on the skin and mucous membranes of adults. It is, however, also considered an opportunistic pathogen; mostly associated with acne vulgaris, but rarely also with severe infections such as infective endocarditis, prosthetic joint infections, and deep sternal wound infections following cardiothoracic surgery. In addition, P. acnes has recently been found in high frequency in prostate tissue from patients with prostatitis and prostate cancer. The NOD-like receptors (NLR) act as intracellular sensors of microbial components, and a number of various bacteria have been found to induce assembling and activation of NLR-inflammasomes; leading to a pro-inflammatory response. The inflammasome-mediated formation of the pro-inflammatory cytokines interleukin-1ß (IL-1ß) and IL-18 involves the auto-proteolytic maturation of caspase-1. This study investigated if P. acnes activates inflammasomes. Propionibacterium acnes isolates (n = 29) with diverse origin were used as stimuli for peripheral leukocytes obtained from blood donors (BDs). The activity of inflammasomes was determined by measuring caspase-1 by flow cytometry and cytokine production by ELISA. A significant amount of caspase-1 was found in neutrophils upon P. acnes stimulation, whereas only a modest activation was seen in monocytes. The activation was mainly produced by components of the bacterial cell and no exo-products, because heat-killed and live bacteria caused high activation of caspase-1 as well as cytokine production, whereas the bacterial supernatant elicited minor effect. The response among different BDs varied significantly, almost fivefold. In addition, P. acnes of various origins showed considerable variation, however, the commensal isolates showed a stronger response compared with the invasive. In conclusion, although regarded as a harmless commensal of the skin, P. acnes strongly activates the inflammasome of human peripheral neutrophils.