Comprehensive analysis of resilience of human airway epithelial barrier against short-term PM2.5 inorganic dust exposure using in vitro microfluidic chip and ex vivo human airway models.

BACKGROUND AND OBJECTIVE: The updated World Health Organization (WHO) air quality guideline recommends an annual mean concentration of fine particulate matter (PM2.5) not exceeding 5 or 15 µg/m3 in the short-term (24 h) for no more than 3-4 days annually. However, more than 90% of the global population is currently exposed to daily concentrations surpassing these limits, especially during extreme weather conditions and due to transboundary dust transport influenced by climate change. Herein, the effect of respirable

Receptor mediated targeting of EGF-conjugated alginate-PAMAM nanoparticles to lung adenocarcinoma: 2D/3D in vitro and in vivo evaluation.

Carboplatin (cis-diamine (1,1-cyclobutandicarboxylaso)­platinum (II)) is a second-generation antineoplastic drug, which is widely used for chemotherapy of lung, colon, breast, cervix, testicular and digestive system cancers. Although preferred over cisplatin due to the lower incidence of nephrotoxicity and ototoxicity, efficient carboplatin delivery remains as a major challenge. In this study, carboplatin loaded alginate- poly(amidoamine) (PAMAM) hybrid nanoparticles (CAPs) with mean sizes of 192.13 ± 4.15 nm were synthesized using a microfluidic platform, then EGF was conjugated to the surface of CAPs (EGF-CAPs) for the receptor-targeted delivery. Hence, increased FITC+ cell counts were observed in A549 spheroids after EGF-CAP treatment compared to CAP in the 3D cellular uptake study. As such, the cytotoxicity of EGF-CAP was approximately 2-fold higher with an IC50 value of 35.89 ± 10.37 µg/mL compared to the CAPs in A549 spheroids. Based on in vivo experimental animal model, anti-tumor activities of the group treated with CAP decreased by 61 %, whereas the group treated with EGF-CAP completely recovered. Additionally, EGF-CAP application was shown to induce apoptotic cell death. Our study provided a new strategy for designing a hybrid nanoparticle for EGFR targeted carboplatin delivery with improved efficacy both in vitro and in vivo applications.

Humanized brain organoids-on-chip integrated with sensors for screening neuronal activity and neurotoxicity.

The complex structure and function of the human central nervous system that develops from the neural tube made in vitro modeling quite challenging until the discovery of brain organoids. Human-induced pluripotent stem cells-derived brain organoids offer recapitulation of the features of early human neurodevelopment in vitro, including the generation, proliferation, and differentiation into mature neurons and micro-macroglial cells, as well as the complex interactions among these diverse cell types of the developing brain. Recent advancements in brain organoids, microfluidic systems, real-time sensing technologies, and their cutting-edge integrated use provide excellent models and tools for emulation of fundamental neurodevelopmental processes, the pathology of neurological disorders, personalized transplantation therapy, and high-throughput neurotoxicity testing by bridging the gap between two-dimensional models and the complex three-dimensional environment in vivo. In this review, we summarize how bioengineering approaches are applied to mitigate the limitations of brain organoids for biomedical and clinical research. We further provide an extensive overview and future perspectives of the humanized brain organoids-on-chip platforms with integrated sensors toward brain organoid intelligence and biocomputing studies. Such approaches might pave the way for increasing approvable clinical applications by solving their current limitations.

Differentiation of Neurons, Astrocytes, Oligodendrocytes and Microglia From Human Induced Pluripotent Stem Cells to Form Neural Tissue-On-Chip: A Neuroinflammation Model to Evaluate the Therapeutic Potential of Extracellular Vesicles Derived from Mesenchymal Stem Cells.

Advances in stem cell (SC) technology allow the generation of cellular models that recapitulate the histological, molecular and physiological properties of humanized in vitro three dimensional (3D) models, as well as production of cell-derived therapeutics such as extracellular vesicles (EVs). Improvements in organ-on-chip platforms and human induced pluripotent stem cells (hiPSCs) derived neural/glial cells provide unprecedented systems for studying 3D personalized neural tissue modeling with easy setup and fast output. Here, we highlight the key points in differentiation procedures for neurons, astrocytes, oligodendrocytes and microglia from single origin hiPSCs. Additionally, we present a well-defined humanized neural tissue-on-chip model composed of differentiated cells with the same genetic backgrounds, as well as the therapeutic potential of bone marrow mesenchymal stem cells (BMSCs)-derived extracellular vesicles to propose a novel treatment for neuroinflammation derived diseases. Around 100 nm CD9 + EVs promote a more anti-inflammatory and pro-remodeling of cell-cell interaction cytokine responses on tumor necrosis factor-α (TNF-α) induced neuroinflammation in neural tissue-on-chip model which is ideal for modeling authentic neural-glial patho-physiology.

Aligned with sustainable development goals: microwave extraction of astaxanthin from wet algae and selective cytotoxic effect of the extract on lung cancer cells.

Astaxanthin is one of the most attractive carotenoid in the cosmetic, food, pharmaceutical, and aquaculture industries due to its strong bioactive properties. Among the various sources, several algae species are considered as rich sources of astaxanthin. Downstream processing of algae involves the majority of the total processing costs. Thus, elimination of high energy involved steps is imperative to achieve cost-effective scale in industry. This study aimed to determine operation conditions for astaxanthin extraction from wet Haematococcus pluvialis using microwave-assisted extraction. The isolated astaxanthin extract was evaluated for cytotoxicity on human lung cancer cells. The microwave-assisted extraction process at 75 °C under the power of 700 Watt for 7 min gave the highest astaxanthin yield (12.24 ± 0.54 mg astaxanthin/g wet cell weight). Based on MTT cell viability and Hoechst 33342 nuclear staining assays on A549 lung cancer cells, astaxanthin inhibited cell growth in dose- and time-dependent manners, where IC50 value was determined as 111.8 ± 14.8 µg/mL and apoptotic bodies were observed along with positive control group at 72 hr. These results showed that the treatment with astaxanthin extracted from wet H. pluvialis by microwave-assisted extraction exhibited anti-cancer activity on lung cancer cells indicating a newly potential to be utilized in industry.

Essential Oil and Supercritical Carbon Dioxide Extract of Grapefruit Peels Formulated for Candida albicans Infections: Evaluation by an in Vitro Model to Study Fungal-Host Interactions.

Resistance to currently available antifungal agents raises the need to develop alternative remedies. Candida albicans is the most common opportunistic pathogenic fungus of humans, colonizing in the genital and intestinal mucosa, skin, and oral-nasal cavity and reducing quality of life. Herein, essential oil from grapefruit (Citrus paradise) peels was obtained by hydrodistillation, and the remaining plant material was sequentially subjected to supercritical carbon dioxide (SC-CO2) extraction to determine the conditions for maximizing phenolic compounds. A statistical design was used to evaluate the effect of temperature (30, 50, 70 °C), pressure (80, 150, 220 bar), and ethanol as a cosolvent (0%, 10%, and 20% v/v). Essential oil and SC-CO2 extracts were mixed at various ratios to develop an effective antifungal formulation. Subsequently, fungal infection was modeled by coculturing C. albicans with human skin keratinocytes (HaCaT) to mimic dermal mycoses, endothelial cells (HUVEC) to evaluate vascular fate, and cervical adenocarcinoma (HeLa) cells to represent additional genital mycoses. Treatment with essential oil and extract (25:75%) formulation for 8 h exhibited slight cytotoxicity toward HeLa cells, no toxicity toward HaCaT and HUVECs, whereas inhibition of C. albicans. Considering the clinical significance, such in vitro models are essential to screen potential compounds for the treatment of opportunistic fungal infections.

Bilayered laponite/alginate-poly(acrylamide) composite hydrogel for osteochondral injuries enhances macrophage polarization: An in vivo study.

Addressing osteochondral defects, the objective of current study was to synthesize bilayered hydrogel, where the cartilage layer was formed by alginate (Alg)-polyacrylamide (PAAm) with and without the addition of TGF-ß3 and bone layer by laponite XLS/Alg-PAAm and characterize by in vitro and in vivo experiments. Exceeding the mechanical strength of Alg-PAAm (32.95 ± 1.23 kPa) and XLS based (317.5 ± 21.72 kPa) hydrogels, XLS/Alg-PAAm hydrogel (469.7 ± 6.1 kPa) activated macrophages towards M2 phenotype and stimulated the expression of anti-inflammatory factors. The addition of TGF-ß3 accelerated transition of macrophage polarization, especially between day 4 and 7. The expression levels of M1-related genes such as CD80, iNOS and TNF-α decreased gradually after day 4, reaching lowest values at day 13, whereas the expression levels of M2-related genes, CD206, Arg1 and STAT6 significantly increased promoting M2 macrophage polarization, which might be associated with accelerated bone repair. Moreover, bilayer structure exhibited a better cell viability as well as repairment thorough the XLS contents. In vivo histological examinations verified the significant surface regularity and hyaline like tissue formation employment, along with synchronized degradation profile of the hydrogel with tissue healing at the end of 12 weeks. A mechanically durable, biocompatible and immunocompatible hydrogel was formulated to be utilized in bone-cartilage engineering applications.

Immunogenicity of a xenogeneic multi-epitope HER2+ breast cancer DNA vaccine targeting the dendritic cell restricted antigen-uptake receptor DEC205.

Breast cancer was ranked first in global cancer incidence in 2020, and HER2 overexpression in breast cancer accounts for 20-30% of breast cancer patients. Current therapeutic strategies increase the survival rate, but resistance to them occurs frequently, and there is an urgent need to develop novel treatments such as DNA vaccines which can induce a specific and long-lasting immune response against HER2 antigens. To enhance the immunogenicity of DNA vaccines, dendritic cells (DCs) can be targeted using multi-epitope proteins that provide accurate immune focusing. For this purpose, we generated a DNA vaccine encoding a fusion protein composed of 1) in silico discovered antigenic epitopes of human and rat HER2 proteins (MeHer2) and 2) a single-chain antibody fragment (ScFv) specific for the DC-restricted antigen-uptake receptor DEC205 (ScFvDEC). The xenogeneic multi-epitope DNA vaccine (pMeHer2) encodes three only T-cell epitopes, two only B-cell epitopes, and two T and B cell epitopes, and pScFvDEC-MeHer2 vaccine additionally encodes ScFvDEC introduced at the N terminus of the MeHer2. Then, mouse groups were immunized with pScFvDEC-MeHer2, pMeHer2, pScFvDEC, pEmpty, and PBS to determine the elicited immune response. pScFvDEC-MeHer2 vaccinated mice showed a strong IgG response (P < 0.0001) and pScFvDEC-MeHer2 induced a significant IgG2a increase (P < 0.01). The percentages of both IFN-γ secreting CD4 and CD8 T cells were higher in mice immunized with pScFvDEC-MeHer2 compared with the pMeHer2. pScFvDEC-MeHer2 and pMeHer2 secreted significantly higher levels of extracellular IFN-γ compared with to control groups (P < 0.0001). In addition, the IFN-γ level of the pScFvDEC-MeHer2 vaccine group was approximately two times higher than the pMeHer2 group (P < 0.0001). Overall, this study identified the pScFvDECMeHer2 construct as a potential DNA vaccine candidate, supporting further studies to be conducted on HER2+ animal models.

Supercritical carbon dioxide dried double layer laponite XLS and alginate/polyacrylamide construct and immune response.

Fabrication of immunocompatible tissue constructs for bone-cartilage defect regeneration is of prime importance. In this study, a double layer hydrogel was successfully synthesized, where alginate/polyacrylamide were formulated to represent cartilage layer (5-10 % (w/w) total polymer ratio) and laponite XLS (2-5-8% (w/w))/alginate/polyacrylamide formed bone layer. Hydrogels were dried by supercritical CO2 at 100 and 200 bar, 45 °C, 5 g/min CO2 flow rate for 2 h. Constructs were treated with collagen, then cellularized and embedded in cell-laden GelMA to mimic the cellular microenvironment. The optimum weight ratio of alginate/polyacrylamide:laponite XLS was 10:5 based on mechanical strength test results. The constructs yielded high porosity (91.50 m2/g) and mesoporous structure, owing to the diffusivity of CO2 at 200 bar (0.49 × 10-7 m2/s). Constructs were then treated with collagen to increase cell adhesion and ATDC5 cells were seeded in the cartilage layer, whereas hFOB cells to the bone layer. About 10-15 % higher cell viability was attained. The porous structure of the construct allowed infiltration of macrophages, promoted polarization and positively affected the behavior of macrophages, yielding a decrease in M1 markers, whereas an increase in M2 on day 4. The formulated tissue constructs would be of value in tissue engineering applications.

Antimicrobial and wound healing properties of cotton fabrics functionalized with oil-in-water emulsions containing Pinus brutia bark extract and Pycnogenol® for biomedical applications.

Topical formulations containing 1-2% of Pinus brutia bark extract and Pycnogenol® have been prepared to investigate the effect of flavonoids on the stability of O/W emulsions, which were subjected to physicochemical and thermal stability tests. The formulations have been applied to cotton fabrics to evaluate antimicrobial properties against Staphylococcus aureus, Escherichia coli, Candida albicans and Aspergillus brasiliensis. Furthermore, prepared cotton fabrics have been tested on keratinocytes seeded in cell culture inserts for wound healing. Results of freeze thaw cycle test indicated enhanced thermo-stability with no major changes in pH and viscosity, likewise the results of centrifugation assay. However, the addition of Pycnogenol® has tremendously decreased the viscosity of the topical formulation (10,900 cp.). In terms of antimicrobial activity, 2% P. brutia treated cotton fabrics decreased the proliferation of Aspergillus brasiliensis 78.8%, which were more effective than that of Pycnogenol® formulation (62.9%). As for wound healing, 2% P. brutia treated cotton fabrics increased HaCaT keratinocyte cell proliferation and accelerated the cell-free gap closure compared to Pycnogenol® and untreated control groups. The obtained results indicate the utilization of pine bark for developing an eco-friendly natural antifungal finish for medical textiles.

Lung carcinoma spheroids embedded in a microfluidic platform.

Three-dimensional (3D) spheroid cell cultures are excellent models used in cancer biology research and drug screening. The objective of this study was to develop a lung carcinoma spheroid based microfluidic platform with perfusion function to mimic lung cancer pathology and investigate the effect of a potential drug molecule, panaxatriol. Spheroids were successfully formed on agar microtissue molds at the end of 10 days, reaching an average diameter of about 317.18 ± 4.05 µm and subsequently transferred to 3D dynamic microfluidic system with perfusion function. While the size of the 3D spheroids embedded in the Matrigel matrix in the platform had gradually increased both in the static and dynamic control groups, the size of the spheroids were reduced and fragmented in the drug treated groups. Cell viability results showed that panaxatriol exhibited higher cytotoxic effect on cancer cells than healthy cells and the IC50 value was determined as 61.55 µM. Furthermore, panaxatriol has been more effective on single cells around the spheroid structure, whereas less in 3D spheroid tissues with a compact structure in static conditions compared to dynamic systems, where a flow rate of 2 µL/min leading to a shear stress of 0.002 dyne/cm2 was applied. Application of such dynamic systems will contribute to advancing basic research and increasing the predictive accuracy of potential drug molecules, which may accelerate the translation of novel therapeutics to the clinic, possibly decreasing the use of animal models. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s10616-021-00470-7.

One-Step Microfluidic Coating of Phospholipid Microbubbles with Natural Alginate Polymer as a Delivery System for Human Epithelial Lung Adenocarcinoma.

In this study, the neoplastic drug frequently used in the treatment of lung cancer, carboplatin is loaded to microbubbles via a microfluidic platform. In order to increase the drug loading capacity of microbubbles, carboplatin is encapsulated into alginate polymer layer. The phospholipid microbubbles (MBs) are synthesized by MicroSphere Creator, which is connected with T-junction and micromixer for the treatment with CaCl2 solution to provide gelation of the alginate coated phospholipid microbubbles (AMBs). The carboplatin loaded alginate coated phospholipid microbubbles (CAMBs) result in 12.2 ± 0.21 µm mean size, obtained by mixing with 0.05% CaCl2 using T-junction. The cytotoxic activities of the synthesized MBs, AMBs, and CAMBs are also investigated with the 3-(4,5-Dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide) (MTT) and live/dead fluorescent dying assays in the A549 and BEAS-2B cell lines. The one-step microfluidic coating of lipid microbubbles with natural alginate polymer appears to be a promising strategy for enhanced drug reservoir properties.

Nano-vesicular formulation of propolis and cytotoxic effects in a 3D spheroid model of lung cancer.

BACKGROUND: Propolis exhibits therapeutic properties due to the presence of phenolic acids, esters, and flavonoids. The scope of this study was to develop a nano-vesicular formulation and establish a three-dimensional (3D) spheroid model in which lung cancer is recapitulated. RESULTS: Niosome vesicles doped with galangin-rich propolis extract were synthesized by the ether injection method using a cholesterol : surfactant mass ratio of 1 : 3 at 40 °C for 1 h. Formulated niosomes were administered to 3D lung cancer spheroid model and the cytotoxicity was compared with that of a two-dimensional (2D) setting. The galangin content was determined as 86 µg mg-1 propolis extract by ultra-performance liquid chromatography (UPLC). The particle size of loaded niosome was 151 ± 2.84 nm with a polydispersity index (PDI) of about 0.232, and an encapsulation efficiency of 70% was achieved. CONCLUSION: The decrease in cell viability and the scattering in the 3D spheroids of A549 lung cancer cells treated with propolis-loaded niosomes were notable, indicating a profound cytotoxic effect and suggesting that they can be utilized as an effective nano-vesicle. © 2020 Society of Chemical Industry.

Development and verification of a three-dimensional (3D) breast cancer tumor model composed of circulating tumor cell (CTC) subsets.

Breast cancer is one of the most common cancer types among women in which early tumor invasion leads to metastases and death. EpCAM (epithelial cellular adhesion molecule) and HER2 (human epidermal growth factor receptor 2) are two main circulating tumor cell (CTC) subsets in HER2+ breast cancer patients. In this regard, the main aim of this study is to develop and characterize a three-dimensional (3D) breast cancer tumor model composed of CTC subsets to evaluate new therapeutic strategies and drugs. For this reason, EpCAM(+) and HER2(+) sub-populations were isolated from different cell lines to establish 3D tumor model that mimics in situ (in vivo) more closely than two-dimensional (2D) models. EpCAM(+)/HER2(+) cells had a high proliferation rate and low tendency to attach to the surface in comparison with parental MDA-MB-453 cells as CTC subsets. Aggressive breast cancer subpopulations cultured in 3D porous chitosan scaffold had enhanced cell-cell and cell-matrix interactions compared to 2D cultured cells and these 3D models showed more aggressive morphology and behavior, expressed higher levels of pluripotency marker genes, Nanog, Sox2 and Oct4. For the verification of the 3D model, the effects of doxorubicin which is a chemotherapeutic agent used in breast cancer treatment were examined and increased drug resistance was determined in 3D cultures. The 3D tumor model comprising EpCAM(+)/HER2(+) CTC subsets developed in this study has a promising potential to be used for investigation of an aggressive CTC microenvironment in vitro that mimics in vivo characteristics to test new drug candidates against CTCs.

Bioengineering-inspired three-dimensional culture systems: Organoids to create tumor microenvironment.

In recent years, in vitro three-dimensional (3D) cell culture systems that better mimic in vivo physiology and tissue microenvironment have become important. It is used for the pre-clinical evaluation of the efficacy and safety profiles of new drug candidates developed especially for the treatment of various diseases including cancer. 3D cell culture techniques overcome the inadequacy of conventional two-dimensional (2D) cell culture models as they are much more informative than the 2D systems. And they can easily replace or reduce the number of in vivo studies which arise many ethical problems in the development of novel therapeutics. This review focuses on the organoid cultures which are 3D bioengineered cell culture systems that guide cell behavior and cell order to mimic in vivo tumor microenvironment.