Effect of lithological properties of beach sediments on plastic pollution in Bodrum Peninsula (SW Türkiye).

The effects grain size on transport and retention of plastics in sediments are controversial issue. Four beaches were selected on the Bodrum Peninsula (SW Türkiye) for this study. Twenty-four samples with poorly to well sorted, sandy gravel, gravel, or gravelly sand were collected from the top five cm of the sampling quadrant's four corners and center of 1 m2 area, from shoreline and backshore. The highest plastic content (38 mesoplastics/600 g - 455 microplastics (MPs)/1200 g) was determined on the Bodrum Coast having the highest population. Polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), polystyrene (PS), polyethylene terephthalate (PET) and polyurethane (PU) were predominantly detected with Fourier Transform Infrared Spectroscopy (FTIR) analysis as MPs as a fragment and fiber. This study indicates the negative correlation between grain size and the number of MPs in coastal sediments. Anthropogenic activities are evaluated as a possible primary source of plastic pollution in the study area.

The in-vivo assessment of Turkish propolis and its nano form on testicular damage induced by cisplatin.

OBJECTIVE: Chemotherapeutic drugs, such as cisplatin (CP), which are associated with oxidative stress and apoptosis, may adversely affect the reproductive system. This study tests whether administration of propolis and nano-propolis (NP) can alleviate oxidative stress and apoptosis in rats with testicular damage induced by CP. METHODS: In this study, polymeric nanoparticles including propolis were synthesized with a green sonication method and characterized using Fourier transform-infrared spectroscopy, Brunauer-Emmett-Teller, and wet scanning transmission electron microscopy techniques. In total, 56 rats were divided into the following seven groups: control, CP, propolis, NP-10, CP + propolis, CP + NP-10, and CP + NP-30. Propolis (100 mg/kg), NP-10 (10 mg/kg), and NP-30 (30 mg/kg) treatments were administered by gavage daily for 21 d, and CP (3 mg/kg) was administered intraperitoneally in a single dose. After the experiment, oxidative stress parameters, namely, malondialdehyde (MDA), glutathione (GSH), glutathione peroxidase (GPx), and catalase (CAT), and apoptotic pathways including B cell leukemia/lymphoma-2 protein (Bcl-2) and Bcl-2-associated X protein (Bax) were measured in testicular tissues. Furthermore, sperm quality and weights of the testis, epididymis, right cauda epididymis, seminal vesicles and prostate were evaluated. RESULTS: Propolis and NP (especially NP-30) were able to preserve oxidative balance (decreased MDA levels and increased GSH, CAT, and GPx activities) and activate apoptotic pathways (decreased Bax and increased Bcl-2) in the testes of CP-treated rats. Sperm motility in the control, CP, and CP + NP-30 groups were 60%, 48.75%, and 78%, respectively (P < 0.001). Especially, NP-30 application completely corrected the deterioration in sperm features induced by CP. CONCLUSION: The results show that propolis and NP treatments mitigated the side effects of CP on spermatogenic activity, antioxidant situation, and apoptosis in rats.

Dataset on Catal's reagent: Sensitive detection of iron (II) sulfate using spectrophotometry.

Catal's reagent is characterized by spectroscopic methods such as fourier-transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR) spectroscopy, mass spectrometry (MS), ultraviolet (UV)-visible spectrophotometry. Effects of different solvents such as methanol and ethanol on absorption spectrum of 1-(Dodecylthio)anthracene-9,10-dione (3) were present. Detection range of iron (II) sulfate using Catal's reagent was analyzed. Synthesis of 1-(Dodecylthio)anthracene-9,10-dione (3) was explained, and absorbances of various concentrations of iron (II) sulfate (0- 10 mg mL-1) were measured. The possible detection mechanism was also explained. The dataset is useful to improve the detection of iron (II) sulfate in various application fields such as environmental, agricultural, sensor, food, textile and cement industries. The study refers to: F. Ozkok, Y.M. Sahin, V. Enisoglu-Atalay, K. Asgarova, N. Onul, T. Catal, Sensitive Detection of Iron (II) Sulfate with a Novel Reagent using Spectrophotometry, Spectchim. Acta. A, 240 (2020), 118631. https://doi.org/10.1016/j.saa.2020.118631.

Turkish Propolis and Its Nano Form Can Ameliorate the Side Effects of Cisplatin, Which Is a Widely Used Drug in the Treatment of Cancer.

This study was performed to determine the effects of chitosan-coated nano-propolis (NP), which is synthesized via a green sonochemical method, and propolis on the side effects of cisplatin (CP), which is a widely used drug in the treatment of cancer. For this aim, 56 rats were divided into seven groups, balancing their body weights (BW). The study was designed as Control, CP (3 mg/kg BW at single dose of CP as intraperitoneal, ip), Propolis (100 mg/kg BW per day of propolis by gavage), NP-10 (10 mg/kg BW of NP per day by gavage), CP + Propolis (3 mg/kg BW of CP and 100 mg/kg BW of propolis), CP + NP-10 (3 mg/kg CP and 10 mg/kg BW of NP), and CP + NP-30 (3 mg/kg BW of CP and 30 mg/kg BW of NP). Propolis and NP (especially NP-30) were preserved via biochemical parameters, oxidative stress, and activation of apoptotic pathways (anti-apoptotic protein: Bcl-2 and pro-apoptotic protein: Bax) in liver and kidney tissues in the toxicity induced by CP. The NP were more effective than propolis at a dose of 30 mg/kg BW and had the potential to ameliorate CP's negative effects while overcoming serious side effects such as liver and kidney damage.

Sensitive detection of iron (II) sulfate with a novel reagent using spectrophotometry.

In this study, a novel reagent was developed for sensitive detection of iron (II) sulfate, spectrophotometrically. A novel thio-anthraquinone derivative, 1-(Dodecylthio)anthracene-9,10-dione (3), was synthesized from the chemical reaction of 1-Chloroanthraquinone (1) and 1-Dodecanethiol (2) by an original reaction method and was used in the preparation of the novel reagent called Catal's reagent. A synthesized thio-anthraquinone analogue (3) was purified by column chromatography, and its chemical structure was characterized by spectroscopic methods such as Fourier-transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR) spectroscopy, mass spectrometry (MS), and ultraviolet (UV)-visible spectrophotometry. The chemical and molecular structure of the developed thio-antraquinone derivative (3) was illuminated using computational methods with the GaussView5 and Gaussian09 programs. Various solvents including ethanol, methanol, and acetonitrile were examined in the preparation of the reagent. A concentration range from 0.2 mg mL-1 up to 10 mg mL-1 of iron (II) sulfate heptahydrate solution in distilled water was prepared. The absorption spectra of Catal's reagent (0.816 mM) showed three peaks between 185 nm-700 nm of wavelength. However, after the reaction with H2O2 and the 30 mM trisodium citrate dihydrate mixture in the presence of an iron sulfate (II) solution, a single peak was observed, producing a stable and reddish/brownish homogenous solution (λ max = 304 nm). The following concentrations of iron (II) sulfate heptahydrate was examined using developed protocol and the reagent, and the concentrations were measured spectrophotometrically at 304 nm, 0.2-1 mg mL-1. Absorbances of reaction mixtures of iron (II) sulfate remained stable up to 48 h. The results indicated that the novel Catal's reagent can be used for sensitive spectrophotometric detection of iron (II) sulfate in aqueous solutions.

Indocyanine green based fluorescent polymeric nanoprobes for in vitro imaging.

Indocyanine green (ICG) provides an advantage in the imaging of deep tumors as it can reach deeper location without being absorbed in the upper layers of biological tissues in the wavelengths, which named "therapeutic window" in the tissue engineering. Unfortunately, rapid elimination and short-term stability in aqueous media limited its use as a fluorescence probe for the early detection of cancerous tissue. In this study, stabilization of ICG was performed by encapsulating ICG molecules into the biodegradable polymer composited with poly(l-lactic acid) and poly(ε-caprolactone) via a simple one-step multiaxial electrospinning method. Different types of coaxial and triaxial structure groups were performed and compared with single polymer only groups. Confocal microscopy was used to image the encapsulated ICG (1 mg/mL) within electrospun nanofibers and in vitro ICG uptake by MIA PaCa-2 pancreatic cancer cells. Stability of encapsulated ICG is demonstrated by the in vitro sustainable release profile in PBS (pH = 4 and 7) up to 21 days. These results suggest the potential of the ability of internalization and accommodation of ICG into the pancreatic cell cytoplasm from in vitro implanted ICG-encapsulated multiaxial nanofiber mats. ICG-encapsulated multilayer nanofibers may be promising for the local sustained delivery system to eliminate loss of dosage caused by direct injection of ICG-loaded nanoparticles in systemic administration.

Synthesis, characterization, and biological properties of composites of hydroxyapatite and hexagonal boron nitride.

Hydroxyapatite (HA), obtained from bovine bones, was successfully reinforced with hexagonal boron nitrite (h-BN). h-BN/HA composites, with BN content up to 1.5 wt %, were sintered at various temperatures between 1000 and 1300°C, in air. Well-sintered samples were obtained after sintering at 1200 and 1300°C. The presence of h-BN contributed to dense, fine, and well-crystallized microstructure. The results of X-ray diffraction analysis and FT-IR spectroscopy showed that the produced composites comprised biphasic ß-TCP/HCA (HCA: carbonate partially substituted HA). High values of mechanical properties were achieved, namely compression strength 155 MPa for the sample 0.5% h-BN/HA and Vickers microhardness of 716 HV for the samples 1.5% h-BN/HA, both sintered at 1300°C. U2OS human bone osteosarcoma proliferation and cell viability showed no adverse effect in the presence of h-BN/HA, suggesting the potential use of the produced materials as safe biomaterials in bone tissue engineering. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2384-2392, 2018.

Fabrication of naturel pumice/hydroxyapatite composite for biomedical engineering.

BACKGROUND: We evaluated the Bovine hydroxyapatite (BHA) structure. BHA powder was admixed with 5 and 10 wt% natural pumice (NP). Compression strength, Vickers micro hardness, Fourier transform infrared spectroscopy, scanning electron microscopy (SEM) and X-ray diffraction studies were performed on the final NP-BHA composite products. The cells proliferation was investigated by MTT assay and SEM. Furthermore, the antimicrobial activity of NP-BHA samples was interrogated. RESULTS: Variances in the sintering temperature (for 5 wt% NP composites) between 1000 and 1300 °C, reveal about 700 % increase in the microhardness (~100 and 775 HV, respectively). Composites prepared at 1300 °C demonstrate the greatest compression strength with comparable result for 5 wt% NP content (87 MPa), which are significantly better than those for 10 wt% and those that do not include any NP (below 60 MPa, respectively). CONCLUSION: The results suggested the optimal parameters for the preparation of NP-BHA composites with increased mechanical properties and biocompatibility. Changes in micro-hardness and compression strength can be tailored by the tuning the NP concentration and sintering temperature. NP-BHA composites have demonstrated a remarkable potential for biomedical engineering applications such as bone graft and implant.

MAGNETIC CORE SHELL STRUCTURES: from 0D to 1D assembling.

Material research and development studies are focused on different techniques of bringing out nanomaterials with desired characteristics and properties. From the point of view of materials development, nowadays scientists are strongly focused on obtaining materials with predefined characteristics and properties. The morphology control seems to be a determinant factor and increasing attention is devoted to this aspect. At this moment it is possible to engineer the material's features by using different methods and materials combination for both medical and industrial applications. In the applications of chemistry and synthesis, biology, mechanics, optics solar cells and microelectronics tailoring the adjustable parameters of stoichiometry, chemical structure, shape and segregation are evaluated and opens new fields. Because of the magnetic features of nanoparticles and durable particle size, less than 100 nm, this study is aiming to describe their uses in practical applications. That's why the whole hydrodynamic magnetic core shell topic will be reviewed on this paper. Additionally, the properties acting in general sight in solid-state physics are utilized for material selection and for defining issue connecting the core, shell structure and their producing properties. Here, in the study of core/shell nanoparticle various physical and chemical synthesis routes and the effect of electrospun method are briefly discussed. Starting from a real void of the scientific literature, the existent data related to the 1D magnetic electrospun materials are reviewed. The perspectives in the medical, environmental or energetic sector is great and bring some real advantages related to the 0D core@shell structures because both mechanical and biological properties are dependent on the morphology of the materials.

Primary hepatic Burkitt lymphoma in a child and review of literature.

Primary hepatic non-Hodgkin lymphoma is extremely rare in childhood and can be overlooked in differential diagnosis of liver masses. In this study, we describe an unusual case of primary hepatic Burkitt lymphoma in childhood.