A facile approach for oil-water separation using superhydrophobic polystyrene-silica coated stainless steel mesh bucket.

Inspired by traditional shaduf technology in the irrigation field, we fabricated a superhydrophobic stainless steel mesh bucket by layering polystyrene and SiO2 nanoparticles through a facile dip coating technique for effective oil-water separation. The superhydrophobic steel mesh bucket could effectively lift oil as well as microplastic pollutants from the water surface. The water contact angle of a two-layered polystyrene-silica coating was 158.5° ± 2°, while the oil contact angle was nearly 0°. The oil-water separation performance of superhydrophobic mesh was tested using several kinds of oil. The separation efficiency achieved for low viscous oil was 99.33 %, while 86.66 % efficiency was recorded for high viscous oil. The superhydrophobic mesh showed high durability against mechanical tests including bending, folding, twisting, adhesive tape tearing (25 cycles), and sandpaper abrasion (20 cycles). The mesh presented admirable thermal and chemical durability. The present superhydrophobic steel mesh bucket is a suitable candidate for large-scale application.

One-Pot Hydrothermal Synthesized Nitrogen and Sulfur Codoped Carbon Dots for Acid Corrosion Inhibition of Q235 Steel.

N and S codoped carbon dots having good water solubility have been successfully made by a novel hydrothermal method and characterized by FTIR, XPS, and TEM. The as-synthesized CDs were carbon particles rich in polar functional groups less than 10 nm in size. Electrochemical measurements, gravimetry, and surface analysis methods were utilized to examine the inhibition characteristics and adsorption mechanism of CDs on the carbon steel in acid pickling solutions. Electrochemical measurements verified that the CDs displayed adequate protection with high inhibition efficiency of 97.8%. The long-term weight-loss experiments up to 72 h further confirmed the excellent corrosion inhibition at room temperature and 313 K. The results presented are helpful for the formulation of more effective acid pickling corrosion inhibitors.

LiFePO4 Nanostructures Fabricated from Iron(III) Phosphate (FePO4 x 2H2O) by Hydrothermal Method.

Electrode materials having nanometer scale dimensions are expected to have property enhancements due to enhanced surface area and mass/charge transport kinetics. This is particularly relevant to intrinsically low electronically conductive materials such as lithium iron phosphate (LiFePO4), which is of recent research interest as a high performance intercalation electrode material for Li-ion batteries. Many of the reported works on LiFePO4 synthesis are unattractive either due to the high cost of raw materials or due to the complex synthesis technique. In this direction, synthesis of LiFePO4 directly from inexpensive FePO4 shows promise.The present study reports LiFePO4 nanostructures prepared from iron (III) phosphate (FePO4 x 2H2O) by precipitation-hydrothermal method. The sintered powder was characterized by X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), Inductive coupled plasma-optical emission spectroscopy (ICP-OES), and Electron microscopy (SEM and TEM). Two synthesis methods, viz. bulk synthesis and anodized aluminum oxide (AAO) template-assisted synthesis are reported. By bulk synthesis, micro-sized particles having peculiar surface nanostructuring were formed at precipitation pH of 6.0 to 7.5 whereas typical nanosized LiFePO4 resulted at pH ≥ 8.0. An in-situ precipitation strategy inside the pores of AAO utilizing the spin coating was utilized for the AAO-template-assisted synthesis. The template with pores filled with the precipitate was subsequently subjected to hydrothermal process and high temperature sintering to fabricate compact rod-like structures.

Localized drug delivery of selenium (Se) using nanoporous anodic aluminium oxide for bone implants.

Electrochemically engineered nanoporous anodized aluminium oxide (AAO) prepared on aluminium (Al) foil by anodization process was employed as a platform for loading different forms of selenium (Se) in order to investigate their release behaviour and potential application for localized drug delivery targeting bone cancer. Several forms of Se including inorganic Se (H2SeO3), organic Se ((C6H5)2Se2), metallic Se, their chitosan composites, electrodeposited (ED) and chemical vapour deposited (CVD) Se were explored and combined with another model drug (indomethacin). Structural, drug-loading and in vitro drug-releasing characteristics of prepared Se-based drug delivery carriers were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and UV-visible spectroscopy (UV-Vis), respectively. Sustained and controlled release of Se was demonstrated through chitosan-composites of inorganic, organic or metallic forms of Se loaded into nanoporous AAO carriers. Cell viability studies showed decreasing toxicity to cancer cells in the order: inorganic Se > ED Se > CVD Se > metallic Se > organic Se. The study suggests new alternatives for localized drug treatment based on low-cost nano-engineered carriers loaded with Se having anti-cancer properties.