An ultrasensitive paper-based SERS sensor for detection of nucleolin using silver-nanostars, plastic antibodies and natural antibodies.

A state-of-the-art, ultrasensitive, paper-based SERS sensor has been developed using silver nanostars (AgNSs) in combination with synthetic and natural antibodies. A key component of this innovative sensor is the plastic antibody, which was synthesized using molecularly imprinted polymer (MIP) technology. This ground-breaking combination of paper substrates/MIPs with AgNSs, which is similar to a sandwich immunoassay, is used for the first time with the aim of SERS detection and specifically targets nucleolin (NCL), a cancer biomarker. The sensor device was carefully fabricated by synthesizing a polyacrylamide-based MIP on cellulose paper (Whatman Grade 1 filter) by photopolymerization. The binding of NCL to the MIP was then confirmed by natural antibody binding using a sandwich assay for quantitative SERS analysis. To facilitate the detection of NCL, antibodies were pre-bound to AgNSs with a Raman tag so that the SERS signal could indicate the presence of NCL. The composition of the sensory layers/materials was meticulously optimized. The intensity of the Raman signal at ∼1078 cm-1 showed a linear trend that correlated with increasing concentrations of NCL, ranging from 0.1 to 1000 nmol L-1, with a limit of detection down to 0.068 nmol L-1 in human serum. The selectivity of the sensor was confirmed by testing its analytical response in the presence of cystatin C and lysozyme. The paper-based SERS detection system for NCL is characterized by its simplicity, sustainability, high sensitivity and stability and thus embodies essential properties for point-of-care applications. This approach is promising for expansion to other biomarkers in various fields, depending on the availability of synthetic and natural antibodies.

New autonomous and self-signaling biosensing device for sarcosine detection.

An early diagnosis is the gold standard for cancer survival. Biosensors have proven their effectiveness in monitoring cancer biomarkers but are still limited to a series of requirements. This work proposes an integrated power solution, with an autonomous and self-signaling biosensing device. The biorecognition element is produced in situ by molecular imprinting to detect sarcosine, a known biomarker for prostate cancer. The biosensor was assembled on the counter-electrode of a dye-sensitized solar cell (DSSC), simultaneously using EDOT and Pyrrole as monomers for the biomimetic process and the catalytic reduction of triiodide in the DSSC. After the rebinding assays, the hybrid DSSC/biosensor displayed a linear behavior when plotting the power conversion efficiency (PCE) and the charge transfer resistance (RCT) against the logarithm of the concentration of sarcosine. The latter obtained a sensitivity of 0.468 Ω/decade of sarcosine concentration, with a linear range between 1 ng/mL and 10 µg/mL, and a limit of detection of 0.32 ng/mL. When interfacing an electrochromic cell, consisting of a PEDOT-based material, with the hybrid device, a color gradient between 1 ng/mL and 10 µg/mL of sarcosine was observed. Thus, the device can be used anywhere with access to a light source, completely equipment-free, suitable for point-of-care analysis and capable of detecting sarcosine within a range of clinical interest.

Wine astringent compounds monitored by an electrochemical biosensor.

An innovative approach for monitoring astringent polyphenols in beverages (wines) is described, consisting of an electrochemical biosensor constructed by adsorbing salivary α-amylase or proline-rich protein (PRP) onto amined gold screen-printed electrodes. Interaction with polyphenols was tested using pentagalloyl glucose (PGG) as a standard, an important representative element for astringency. The analytical properties of the resulting biosensors were evaluated by electrochemical impedance spectroscopy at different pHs. The PRP-biosensor was able to bind to PGG with higher sensitivity, displaying lower limit of the linear range of 0.6 µM. Wine samples were tested to prove the concept and the concentrations obtained ranged from 0.17 to 4.7 µM, as expressed in PGG units. The effects of side-compounds on PRP and on α-amylase binding to PGG were tested (gallic acid, catechin, ethanol, glucose, fructose and glycerol) and considered negligible. Overall, concentrations > 1.0 µM in PGG units are signaling electrochemical impedance, providing a quantitative monitoring of astringent compounds.

Paper-based aptasensor for colorimetric detection of osteopontin.

This work presents a novel cellulose-based aptasensor for the colorimetric detection of a cancer biomarker, osteopontin (OPN), in point-of-care (PoC) analysis. For this purpose, the cellulose paper was chemically modified with (mercaptopropyl)methyldimetoxisilane to attach the thiolated aptamer, which acts as a biological detection layer. The surface modification was checked by Fourier transform infrared spectroscopy and thermogravimetric analysis. Colorimetric detection was performed using a conventional staining solution, Bradford reagent. The color analysis was performed by evaluating the RGB coordinates provided by the ImageJ program from the photographs taken with a smartphone. Overall, the biosensor shows good sensitivity with a wide linear range (R > 0.998) of 5-1000 ng/mL and a detection limit lower than 5 ng/mL in buffer and commercial human serum solution, after 30 min of incubation. In addition, this aptasensor shows good selectivity to some interfering species such as bovine serum albumin and recombinant OPN. Analytical data obtained from spiked serum samples confirm the accuracy of the method. Importantly, it is a broad-spectrum method that tends to meet the criteria of REASSURED (real-time connectivity, ease of sampling, affordability, specificity, ease of use, speed and robustness, device freedom, and deliverability) for global testing.

The modulatory role of internet-supported mindfulness-based cognitive therapy on extracellular vesicles and psychological distress in people who have had cancer: a protocol for a two-armed randomized controlled study.

BACKGROUND: Mindfulness-based interventions (MBIs) have been used in oncology contexts as a promising tool with numerous benefits for various health-related and psychosocial outcomes. Despite the increasing popularity of MBIs, few randomized controlled trials (RCTs) have examined their effects upon biological parameters. Specifically, no previous study has examined the effects of MBIs on extracellular vesicles (EVs), which are potentially important markers of health, disease, and stress. Moreover, the lack of RCTs is even more limited within the context of technology-mediated MBIs and long-term effects. METHODS: The current study protocol presents a two-arm, parallel, randomized controlled study investigating the effects of internet-supported mindfulness-based cognitive therapy (MBCT) compared with treatment as usual (TAU). Primary outcomes are psychological distress and EV cargo of distressed participants with previous breast, colorectal, or prostate cancer diagnoses. Secondary outcomes are self-reported psychosocial and health-related measures, and additional biological markers. Outcomes will be assessed at baseline, 4 weeks after baseline (mid-point of the intervention), 8 weeks after baseline (immediately post-intervention), 24 weeks after baseline (after booster sessions), and 52 weeks after baseline. Our goal is to recruit at least 111 participants who have been diagnosed with breast, prostate, or colorectal cancer (cancer stage I to III), are between 18 and 65 years old, and have had primary cancer treatments completed between 3 months and 5 years ago. Half of the participants will be randomized to the TAU group, and the other half will participate in an 8-week online MBCT intervention with weekly group sessions via videoconference. The intervention also includes asynchronous homework, an online retreat after the fifth week, and 4 monthly booster sessions after completion of the 8-week programme. DISCUSSION: This study will allow characterizing the effects of internet-based MBCT on psychosocial and biological indicators in the context of cancer. The effects on circulating EVs will also be investigated, as a possible neurobiological pathway underlying mind-body intervention effects. TRIAL REGISTRATION: ClinicalTrials.gov NCT04727593 (date of registration: 27 January 2021; date of record verification: 6 October 2021).

Plastic Antibody of Polypyrrole/Multiwall Carbon Nanotubes on Screen-Printed Electrodes for Cystatin C Detection.

This work reports the design of a novel plastic antibody for cystatin C (Cys-C), an acute kidney injury biomarker, and its application in point-of-care (PoC) testing. The synthetic antibody was obtained by tailoring a molecularly imprinted polymer (MIP) on a carbon screen-printed electrode (SPE). The MIP was obtained by electropolymerizing pyrrole (Py) with carboxylated Py (Py-COOH) in the presence of Cys-C and multiwall carbon nanotubes (MWCNTs). Cys-C was removed from the molecularly imprinted poly(Py) matrix (MPPy) by urea treatment. As a control, a non-imprinted poly(Py) matrix (NPPy) was obtained by the same procedure, but without Cys-C. The assembly of the MIP material was evaluated in situ by Raman spectroscopy and the binding ability of Cys-C was evaluated by the cyclic voltammetry (CV) and differential pulse voltammetry (DPV) electrochemical techniques. The MIP sensor responses were measured by the DPV anodic peaks obtained in the presence of ferro/ferricyanide. The peak currents decreased linearly from 0.5 to 20.0 ng/mL of Cys-C at each 20 min successive incubation and a limit of detection below 0.5 ng/mL was obtained at pH 6.0. The MPPy/SPE was used to analyze Cys-C in spiked serum samples, showing recoveries <3%. This device showed promising features in terms of simplicity, cost and sensitivity for acute kidney injury diagnosis at the point of care.

A passive direct methanol fuel cell as transducer of an electrochemical sensor, applied to the detection of carcinoembryonic antigen.

This work describes an electrochemical sensor with a biomimetic plastic antibody film for carcinoembryonic antigen (CEA, an important biomarker in colorectal cancer), integrated in the electrical circuit of a direct methanol fuel cell (DMFC), working in passive mode and used herein as power supply and signal transducer. In detail, the sensing layer for CEA consisted of a Fluorine-doped Tin Oxide (FTO) conductive glass substrate - connected to the negative pole side of the DMFC - with a conductive poly (3,4-ethylenedioxythiophene) (PEDOT) layer and a polypyrrol (PPy) molecularly-imprinted polymer (MIP), assembled in-situ. This sensing element is then closed using a cover FTO-glass, hold in place with a clip, connected to the positive side of the DMFC. When compared with control DMFCs, the power curves of DMFC/Sensor integrated system showed decreased power values due to the MIP layer interfaced in the electrical circuit, also displaying high stability signals. The DMFC/Sensor was further calibrated at room temperature, in different medium (buffer, a synthetic physiological fluid model and Cormay® serum), showing linear responses over a wide concentration range, with a limit of detection of 0.08 ng/mL. The DMFC/Sensor presented sensitive data, with linear responses from 0.1 ng/mL to 100 µg/mL and operating well in the presence of human serum. Overall, the results obtained evidenced the possibility of using a DMFC as a transducing element in an electrochemical sensor, confirming the sensitive and selective readings of the bio (sensing) imprinted film. This integration paves the way towards fully autonomous electrochemical devices, in which the integration of the sensor inside the fuel cell may be a subsequent direction.

Dual biorecognition by combining molecularly-imprinted polymer and antibody in SERS detection. Application to carcinoembryonic antigen.

This work reports the innovative combination of a molecularly-imprinted polymer (MIP) and a natural antibody for the accurate surface-enhanced Raman spectroscopy (SERS) detection of carcinoembryonic antigen (CEA). The MIP material acted as a pre-concentration scheme for the target protein, while the natural antibody was responsible to signal the presence of CEA on the MIP platform. Gold-based screen-printed electrodes were used as substrate and gallic acid (GA) was used herein for the first time in the assembly of a MIP film, by electropolymerization, in the presence of CEA. This layer was further covered by a second ultra-thin film of electropolymerized benzoic acid (BA), to avoid non-specific binding. The rebinding features of the MIP film were evaluated by electrochemical impedance spectroscopy (EIS) and a linear response was observed from 1 to 1000 ng/mL. For a sensitive SERS detection, the MIP film was first incubated in sample containing CEA and next incubated in SERS tag. For the SERS tag, gold nanostars (AuNSs) were employed as metal support, coupled to 4-aminothiophenol (4-ATP) as Raman reporter and to a natural antibody for CEA as recognition element. The overall system showed a sensitive response down to 1.0 ng/mL, which was different from the blank signal. Overall, the innovative approach presented herein combines the advantages of using two different targeting elements for CEA. The costs and time of MIP production were substantially low due to selection of electropolymerization approach and the proposal described herein may be extended to other target molecules.

Molecularly imprinted polymer SPE sensor for analysis of CA-125 on serum.

Considering the high incidence level and mortality rate of ovarian cancer, particularly among the European female population, the carbohydrate antigen 125 (CA-125) was selected as the protein target for this study for the development of a MIP-based biosensor. This work presents the development of molecular imprinting polymers (MIPs) on gold electrode surface for CA-125 biomarker recognition. The preparation of the CA-125 imprinting was obtained by electropolymerization of pyrrole (Py) monomer in a gold electrode using cyclic voltammetry (CV) in order to obtain highly selective materials with great molecular recognition capability. The quantification of CA-125 biomarker was made through the comparison of two methods: electrochemical (square wave voltammetry -SWV) and optical transduction (surface plasmon resonance -SPR). SWV has been widely used in biological molecules analysis since it is a fast and sensitive technique. In turn, SPR is a non-destructive optical technique that provides high-quality analytical data of CA-125 biomarker interactions with MIP. Several analytical parameters, such as sensitivity, linear response interval, and detection limit were determined to proceed to the performance evaluation of the electrochemical and optical transduction used in the development of the CA-125 biosensor. The biosensor based in the electrochemical transduction was the one that presented the best analytical parameters, yielding a good selectivity and a detection limit (LOD) of 0.01 U/mL, providing a linear concentration range between 0.01 and 500 U/mL. This electrochemical biosensor was selected for the study and it was successfully applied in the CA-125 analysis in artificial serum samples with recovery rates ranging from 91 to 105% with an average relative error of 5.8%.

Self-powered and self-signalled autonomous electrochemical biosensor applied to cancinoembryonic antigen determination.

This work describes a novel and disruptive electrochemical biosensing device that is self-powered by light and self-signalled by an optical readout. Electrical energy requirements are ensured by a photovoltaic cell that is a dye sensitized solar cell (DSSC), in which one of the electrodes is the biosensing unit. The readout converts electrical energy into colour by an electrochromic cell and signals the concentration dependent event. This device was designed to target a cancer biomarker, cancinoembryonic antigen (CEA). In brief, the sensing unit was assembled on a conductive glass substrate with a highly conductive poly(3,4-ethylenedioxythiophene) (PEDOT) layer, using a molecularly-imprinted polymer of polypyrrol (PPy) as biorecognition element. This sensing unit acted as the counter electrode (CE) of the DSSC, generating a hybrid device with a maximum power conversion efficiency of 3.45% for a photoanode area of 0.7 cm2. The hybrid DSSC/biosensor had an electrical output that was CEA concentration dependent from 100 ng/mL to 100 µg/mL, with a limit detection of 0.14 ng/mL in human urine samples. The electrochromic cell consisted of a PEDOT-based material and showed a colour gradient change for CEA concentrations, ranging from 0.1 ng/mL to 100 µg/mL. Overall, this self-powered and self-signalled set-up is equipment free and particularly suitable for point-of-care analysis (POC), being able to screen CEA in real samples and differentiating critical concentrations for establishing a diagnosis. It holds the potential to provide clinical relevant data anywhere, in a fully independent manner.

Photovoltaics, plasmonics, plastic antibodies and electrochromism combined for a novel generation of self-powered and self-signalled electrochemical biomimetic sensors.

This work describes further developments into the self-powered and self-signalled biosensing system that merges photovoltaic cells, plastic antibodies and electrochromic cells into a single target. Herein, the plasmonic effect is introduced to improve the photoanode features of the photovoltaic cell, a dye sensitized solar cell (DSSC), and better electrocatalytic features are introduced in the electrode containing the sensing element. In brief, the DSSC had a counter-electrode of poly(3,4-ethylenedioxythiophene) on an FTO glass modified by a plastic antibody of 3,4-ethylenedioxythiophene and pyrrol. The photoanode had dye sensitized TiO2 modified with gold nanoparticles (AuNPs) to increase the cell efficiency, aiming to improve the sensitivity of the response of hybrid device for the target biomarker. The target biomarker was carcinoembryonic antigen (CEA). The response of the hybrid device evidenced a linear trend from 0.1 ng/mL to 10 µg/mL, with an anionic slope of 0.1431 per decade concentration. The response of the plastic antibody for CEA revealed great selectivity against other tumour markers (CA 15-3 or CA 125). The colour response of the electrochromic cell was also CEA concentration dependent and more sensitive when the hybrid device was set-up with a photoanode with AuNPs. A more intense blue colour was obtained when higher concentrations of CEA were present. Overall, this improved version of the self-powered and self-signalled set-up has zero-requirements and is particularly suitable for point-of-care analysis (POC). It is capable of screening CEA in real samples and differentiating clinical levels of interest. This concept opens new horizons into the current cancer screening approaches.

Biomimetic materials assembled on a photovoltaic cell as a novel biosensing approach to cancer biomarker detection.

This work describes for the first time the integration of Dye Sensitized Solar Cell (DSSC) technology in biosensors and biomimetic materials, opening doors towards a new dimension of autonomous screening devices that may be used in point-of-care, with zero-power requirements. DSSCs are fabricated with a counter electrode (CE) of polypyrrole (PPy) that was made responsive to a specific protein by biomimetic material (BM) technology. Carcinogenic embryonic antigen (CEA) was selected as target protein. The resulting BM-PPy film acted as biomimetic artificial antibody for CEA. Rebinding of CEA into this film changed its intrinsic electrical properties and the subsequent electrical output of the DSSC using it as CE. The quantity of CEA in solution was deduced by I-V and electrochemical impedance spesctroscopy (EIS). Linear responses to CEA were observed down to 0.25 pg/mL, with 0.13 pg/mL detection limit. Control films of PPy (prepared without CEA in the electropolymerization step) confirmed the ability of the BM material to recognize the target protein. Accurate results were obtained in the analysis of urine samples. Further developments into this ground-breaking self-powered biosensor will display a huge impact in point-to-care medical applications, which may be extended to other fields of knowledge.

Sensing CA 15-3 in point-of-care by electropolymerizing O-phenylenediamine (oPDA) on Au-screen printed electrodes.

This work presents an alternative device for cancer screening in liquid biopsies. It combines a biomimetic film (i) with electrochemical detection (ii). The biomimetic film (i) was obtained by electro-polymerizing amine-substituted benzene rings around a CA 15-3 target. This protein target was previously adsorbed on a gold (Au) support and incubated in charged monomers (4-Styrenesulfonate sodium and 3-Hydroxytyraminium chloride). The protein was further eliminated by enzymatic activity, leaving behind vacant sites for subsequent rebinding. Electrochemical detection (ii) was achieved on an Au working electrode, designed on commercial screen-printed electrodes. Raman spectroscopy, atomic force microscopy and ellipsometric readings were used to follow the chemical modification of the Au surface. The ability of the material to rebind CA15-3 was monitored by electrochemical techniques. The device displayed linear responses to CA15-3 ranging from 0.25 to 10.00 U/mL, with detection limits of 0.05 U/mL. Accurate results were obtained by applying the sensor to the analysis of CA15-3 in PBS buffer and in serum samples. This biosensing device displayed successful features for the detection of CA 15-3 and constitutes a promising tool for breast cancer screening procedures in point-of-care applications. Moreover, its scale-up seems feasible as it contains a plastic antibody assembled in situ, in less than 1 minute, and the analysis of serum takes less than 30 minutes.

Biosensor-based selective detection of Zika virus specific antibodies in infected individuals.

Zika virus (ZIKV) recently emerged as a global threat subsequent to its global spread because it induces microencephaly and other brain damages in infants born to infected mothers. Epidemiological monitoring of infection has been hampered by the absence of reliable serological tests capable to distinguish between ZIKV and other Flavivirus infections, in particular Dengue virus (DENV). As both viruses are transmitted by the same mosquito-species, their distributions largely overlap and reliable serological distinction between the viruses is essential. Here we develop a novel biosensor which is based on recombinant forms of ZIKV non-structural protein 1 (NS1) and the domain III of the envelope protein (EDIII). Using electrochemical impedance spectroscopy (EIS) and square wave voltammetry (SWV), we demonstrate that in addition to extremely sensitive detection of ZIKV-specific antibodies in serum and saliva, the biosensor promptly distinguished ZIKV and DENV-specific antibodies. Hence, this novel biosensor allows assessing ZIKV antibodies in blood and saliva and results are unaffected by presence of DENV virus-specific antibodies.

Disposable electrochemical detection of breast cancer tumour marker CA 15-3 using poly(Toluidine Blue) as imprinted polymer receptor.

In this work, electrically-conducting poly(Toludine Blue) was employed for the first time as synthetic receptor film, prepared by Molecular Imprinting strategies and using electrochemical methods, for the specific screening of breast cancer biomarker Carbohydrate Antigen 15-3 (CA 15-3). The protein imprinted poly(Toluidine Blue) film was grown in a pre-formed Toluidine Blue (TB) tailed SAM at the AuSPE surface, which greatly enhanced the stability against degradation of the Molecular Imprinted Polymer (MIP) film at the electrode surface. The MIP receptor film recognition ability towards the protein was investigated by fitting data to Freundlich isotherm. The binding affinity (KF) obtained for the MIP system was significantly higher (~ 12-fold) to that obtained for the NIP system, demonstrating the success of the approach in creating imprinted materials that specifically respond to CA 15-3 protein. The incubation of the MIP modified electrode with increasing concentration of protein (from 0.10 U mL-1 to 1000 U mL-1) resulted in a decrease of the ferro/ferricyanide redox current. The device displayed linear response from 0.10 U mL-1 to 100 U mL-1 and LODs below 0.10 U mL-1 were obtained from calibration curves built in neutral buffer and diluted artificial serum, using DPV technique, enabling the detection of the protein biomarker at clinically relevant levels. The developed MIP biosensor was applied to the determination of CA 15-3 in spiked serum samples with satisfactory results. The developed device provides a new strategy for sensitive, rapid, simple and cost-effective screening of CA 15-3 biomarker. Importantly, the overall approach seems suitable for point-of-care (PoC) use in clinical context.

A dye-sensitized solar cell acting as the electrical reading box of an immunosensor: Application to CEA determination.

Monitoring cancer biomarkers in biological fluids has become a key tool for disease diagnosis, which should be of easy access anywhere in the world. The possibility of reducing basic requirements in the field of electrochemical biosensing may open doors in this direction. This work proposes for this purpose an innovative electrochemical immunosensing system using a photovoltaic cell as an electrical reading box. Immunosensing ensures accuracy, the electrochemical-ground of the device ensures sensitivity and detectability, and the photovoltaic cell drives the system towards electrical autonomy. As proof-of-concept, Carcinoembryonic antigen (CEA) was used herein, a cancer biomarker of clinical relevance. In brief, a conductive glass with a fluorine doped tin oxide film was used as conductive support and modified with anti-CEA by means of a bottom-up approach. All stages involved in the biochemical modification of the FTO surface were followed by electrochemical techniques, namely electrochemical impedance spectroscopy and cyclic voltammetry. This electrode acted as counter electrode of a dye-sensitized solar cells, and the electrical output of this cell was monitored for the different concentrations of CEA. Under optimized conditions, the device displayed a linear behaviour against CEA concentration, from 5 pg/mL to 15 ng/mL. The immunosensor was applied to the analysis of CEA in urine from healthy individual and spiked with the antigen. Overall, the presented approach demonstrates that photovoltaic cells may be employed as an electrical reading box of electrochemical biosensors, yielding a new direction towards autonomous electrochemical biosensing.

Antibody Biomimetic Material Made of Pyrrole for CA 15-3 and Its Application as Sensing Material in Ion-Selective Electrodes for Potentiometric Detection.

This work reports a very simple approach for creating a synthetic antibody against any protein of interest and its application in potentiometric transduction. The selected protein was Breast Cancer Antigen (CA 15-3), which is implicated in breast cancer disease and used to follow-up breast cancer patients during treatment. The new material with antibody-like properties was obtained by molecular-imprinting technology, prepared by electropolymerizing pyrrol (Py, 5.0 × 10-3 mol/L) around Breast Cancer Antigen (CA 15-3) (100 U/mL) on a fluorine doped tin oxide (FTO) conductive glass support. Cyclic voltammetry was employed for this purpose. All solutions were prepared in 4-(2-Hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) buffer, of pH 6.5. The biomarker was removed from the imprinted sites by chemical action of ethanol. The biomimetic material was then included in poly vinyl chloride (PVC) plasticized membranes to act as potentiometric ionophore, having or not a lipophilic ionic additive added. The corresponding selective electrodes were evaluated by calibration curves (in buffer and in synthetic serum) and by selectivity testing. The best analytical performance was obtained by selective electrodes including the plastic antibody and no lipophilic additive. The average limits of detection were 1.07 U/mL of CA 15-3, with a linear response from 1.44 to 13.2 U/mL and a cationic slope of 44.5 mV/decade. Overall, the lipophilic additives yielded no advantage to the overall potentiometric performance. The application of the MIP-based electrodes to the analysis of spiked synthetic serum showed precise and accurate results.

Paper-Based Sensing Device for Electrochemical Detection of Oxidative Stress Biomarker 8-Hydroxy-2'-deoxyguanosine (8-OHdG) in Point-of-Care.

This work presents a cost-effective, label-free in point-of-care (POC) biosensor for the sensitive detection of 8-hydroxy-2'-deoxyguanosine (8-OHdG), the most abundant oxidative product of DNA, that may allow a premature assessment of cancer disease, thereby improving diagnosis, prognostics and survival rates. The device targets the direct detection of 8-OHdG by using for the first time a carbon-ink 3-electrode on a paper substrate coupled to Differential Pulse Voltammetry readings. This design was optimized by adding nanostructured carbon materials to the ink and the conducting polymer PEDOT, enhancing the electrocatalytic properties of the sensor towards 8-OHdG detection. Meanwhile, the ability of this oxidative stress biomarker to undertake an oxidation reaction enabled the development of the sensing electrochemical device without the need of chemical probes and long incubation periods. This paper-modified sensor presented high electrochemical performance on the oxidation of 8-OHdG with a wide linear range (50-1000 ng/ml) and a low detection limit (14.4 ng/ml). Thus, our results showed the development of a direct and facile sensor with good reproducibility, stability, sensitivity and more importantly, selectivity. The proposed carbon-based electrochemical sensor is a potential candidate to be miniaturized to small portable size, which make it applicable for in-situ 8-OHdG sensing in real biological samples.

Electrochemical detection of cardiac biomarker myoglobin using polyphenol as imprinted polymer receptor.

An electrochemical biosensor was developed by merging the features of Molecular Imprinting technique and Screen-Printed Electrode (SPE) for the simple and fast screening of cardiac biomarker myoglobin (Myo) in point-of-care (POC). The MIP artificial receptor for Myo was prepared by electrooxidative polymerization of phenol (Ph) on a AuSPE in the presence of Myo as template molecule. The choice of the most effective protein extraction procedure from the various extraction methods tested (mildly acidic/basic solutions, pure/mixed organic solvents, solutions containing surfactants and enzymatic digestion methods), and the optimization of the thickness of the polymer film was carefully undertaken in order to improve binding characteristics of Myo to the imprinted polymer receptor and increase the sensitivity of the MIP biosensor. The film thickness was optimized by adjusting scan rate and the number of cycles during cyclic voltammetric electropolymerization of Ph. The thickness of the polyphenol nanocoating of only few nanometres (∼4.4 nm), and similar to the protein diameter, brought in significant improvements in terms of sensor sensitivity. The binding affinity of MIP receptor film was estimated by fitting the experimental data to Freundlich isotherm and a ∼8 fold increase in the binding affinity of Myo to the imprinted polymer (KF = 0.119 ± 0.002 ng-1 mL) when compared to the non-imprinted polymer (KF = 0.015 ± 0.002 ng-1 mL) which demonstrated excellent (re)binding affinity for the imprinted protein. The incubation of the Myo MIP receptor modified electrode with increasing concentration of protein (from 0.001 ng mL-1 to 100 µg mL-1) resulted in a decrease of the ferro/ferricyanide redox current. LODs of 2.1 and 14 pg mL-1 were obtained from calibration curves built in neutral buffer and diluted artificial serum, respectively, using SWV technique, enabling the detection of the protein biomarker at clinically relevant levels. The prepared MIP biosensor was applied to the determination of Myo spiked serum samples with satisfactory results.

Novel biomimetic composite material for potentiometric screening of acetylcholine, a neurotransmitter in Alzheimer's disease.

This work describes a novel approach to produce an antibody-like biomimetic material. It includes preparing composite imprinted material never presented before, with highly conductive support nanostructures and assembling a high conductivity polymeric layer at low temperature. Overall, such highly conductive material may enhance the final features of electrically-based devices. Acetylcholine (ACh) was selected as target analyte, a neurotransmitter of importance in Alzheimer's disease. Potentiometric transduction was preferred, allowing quick responses and future adaptation to point-of-care requirements. The biomimetic material was obtained by bulk polymerization, where ACh was placed in a composite matrix of multiwalled carbon nanotubes (MWCNTs) and aniline (ANI). Subsequent polymerization, initiated by radical species, yielded a polymeric structure of polyaniline (PANI) acting as physical support of the composite. A non-imprinted material (NIM) having only PANI/MWCNT (without ACh) has been prepared for comparison of the biomimetic-imprinted material (BIM). RAMAN and Fourier Transform Infrared spectroscopy (FTIR), Transmission Electron microscopy (TEM), and Scanning Electron microscope (SEM) analysis characterized the structures of the materials. The ability of this biomaterial to rebind ACh was confirmed by including it as electroactive compound in a PVC/plasticizer mixture. The membranes with imprinted material and anionic additive presented the best analytical characteristics, with a sensitivity of 83.86mV decade-1 and limit of detection (LOD) of 3.45×10-5mol/L in HEPES buffer pH4.0. Good selectivity was observed against creatinine, creatine, glucose, cysteine and urea. The electrodes were also applied on synthetic serum samples and seemed a reliable tool for screening ACh in synthetic serum samples. The overall performance showed fast response, reusability, simplicity and low price.