Effect of Different Graft Material Consistencies in the Treatment of Minimal Bone Dehiscence: A Retrospective Pilot Study.

Among different therapeutic strategies proposed in the case of bone volume deficit, guided bone regeneration (GBR) is a consolidated surgical procedure. The objective of this study is to retrospectively evaluate the behavior of two bone grafts with different consistencies in the GBR procedure by measuring the volumetric tissue changes 1 year after surgery. For this retrospective analysis, 25 cases of GBR with simultaneous implant insertion were selected. A total of 13 were grafted with a porcine cortico-cancellous bone mix (CCBM group), and 12 were grafted with a pre-hydrated granulated cortico-cancellous bone mix of porcine origin blended with 20% TSV gel (Collagenated-CCBM). A collagen membrane was fixed to cover the bone defect. A total of 42 implants were placed with computer-guided surgery. Preoperative and 12-month postoperative digital impressions were used to evaluate dimensional changes. Student's t-test used for independent samples showed no statistically significant differences between the integrated distance (p = 0.995) and mean distance (p = 0.734). The mean integrated distance in the CCBM group was 41.80 (SD. 101.18) compared to a mean of 42.04 (SD. 66.71) in the Collagenated-CCBM group. Given the limitations of this study, in patients with peri-implant bone dehiscence, simple heterologous and collagenated heterologous cortico-cancellous bone grafts are suitable for filling the bone defect to promote bone regeneration, although further studies are needed.

CAD/CAM Titanium Meshes for GBR: A Case Series with Preliminary Histologic Analysis.

Titanium has been proposed as a mesh material for guided bone regeneration (GBR) since the 1990s. To overcome difficulties in shaping and adapting meshes to the defect, digital techniques were introduced to digitally print meshes capable of fitting the bone perfectly, reproduced through the patient's CT scan. Five patients were included in this case series, and their CBCT data were acquired and sent to the producer of the titanium meshes. 3D regenerative surgery was performed with titanium meshes and a mix of demineralized bovine bone matrix (DBBM) and autogenous bone (1:1 ratio). Radiographic measures were evaluated on paraxial sections of the CBCT through a dedicated software. When possible, regenerated bone samples were obtained at implant insertion. Four out of five regenerated areas healed without local or systemic complications. One mesh was removed after 2 months and 2 weeks due to exposure. The mean vertical bone gain was 4.3 ± 1.5 mm (range: 2.5 to 7 mm). Two histologic samples were obtained. In sample 1, bone tissue area and graft material area were 44.4% and 12.5%, respectively; in sample 2, the same parameters were 15.6% and 16.9%, respectively.

Polycaprolactone/ß-Tricalcium Phosphate Composite Scaffolds with Advanced Pore Geometries Promote Human Mesenchymal Stromal Cells' Osteogenic Differentiation.

Critical-sized mandibular bone defects, arising from, for example, resections after tumor surgeries, are currently treated with autogenous bone grafts. This treatment is considered very invasive and is associated with limitations such as morbidity and graft resorption. Tissue engineering approaches propose to use 3D scaffolds that combine structural features, biomaterial properties, cells, and biomolecules to create biomimetic constructs. However, mimicking the complex anatomy and composition of the mandible poses a challenge in scaffold design. In our study, we evaluated the dual effect of complex pore geometry and material composition on the osteogenic potential of 3D printed scaffolds. The scaffolds were made of polycaprolactone (PCL) alone (TCP0), or with a high concentration of ß-tricalcium phosphate (ß-TCP) up to 40% w/w (TCP40), with two complex pore geometries, namely a star- (S) and a diamond-like (D) shape. Scanning electron microscopy and microcomputed tomography images confirmed high fidelity during the printing process. The D-scaffolds displayed higher compressive moduli than the corresponding S-scaffolds. TCP40 scaffolds in simulated body fluid showed deposition of minerals on the surface after 28 days. Subsequently, we assessed the differentiation of seeded bone marrow-derived human mesenchymal stromal cells (hMSCs) over 28 days. The early expression of RUNX2 in the cell nuclei confirmed the commitment toward an osteogenic phenotype. Moreover, alkaline phosphatase (ALP) activity and collagen deposition displayed an increasing trend in the D-scaffolds. Collagen type I was mainly present in the deposited extracellular matrix (ECM), confirming deposition of bone matrix. Finally, Alizarin Red staining showed successful mineralization on all the TCP40 samples, with higher values for the S-shaped scaffolds. Taken together, our study demonstrated that the complex pore architectures of scaffolds comprised TCP40 stimulated osteogenic differentiation and mineralization of hMSCs in vitro. Future research will aim to validate these findings in vivo.

CAD-CAM Titanium Meshes for GBR: A Case Series with Preliminary Histological Analysis.

Titanium has been proposed as a mesh material for GBR since the nineties. To overcome difficulties in shaping and adaptation to the defect, digital elaboration techniques were introduced to digitally print meshes capable of fitting the bone perfectly, reproduced through the CT scan of the patient. Five patients were included in this case series. CBCT data of patients were acquired and sent to the producer of the titanium mesh. 3-dimension regenerative surgery was performed with titanium meshes and a mix of Demineralized Bovine Bone Matrix (DBBM) and Autologous bone (1:1 ratio). Radiographic measures were evaluated on paraxial sections of the CBCT through a dedicated software. When possible, regenerated bone samples were obtained at implant insertion time. Four out of five regenerated areas healed without local and systemic complications. One mesh was removed after two months and two weeks because of exposition. Mean vertical bone gain was 4.3 ± 1.5 mm (range 2.5 - 7 mm). Two histologic samples were obtained. In sample n.1, Bone Tissue Area and Graft Material Area were respectively 44.4% and 12.5%. In sample n.2, the same parameters were 15.6% and 16.9% respectively.

Socket Preservation Using Dentin Mixed with Xenograft Materials: A Pilot Study.

BACKGROUND: The use of human dentin matrix could serve as an alternative to autologous, allogenic, and xenogeneic bone grafts due to its osteoinductive characteristics. The limitations of its use is tooth availability and that it is often necessary to mix it with a biomaterial. AIM: The aim of this study was to analyze a mix of two different graft materials with different reabsorption ranges when the dentin graft material was not sufficient for full socket preservation. METHODS: Seven socket preservation surgeries were carried out employing a mixed graft material containing 50% dentin and 50% xenograft. After four months of recovery, the implants were positioned. At the time of the prosthesis placement and implant surgery, bone samples were collected. RESULTS: The histologic analysis revealed no inflammatory or infective reaction against the seven biopsies. The histomorphometric graft analysis revealed an amount of New Bone of 29.03 ± 6.57% after 4 months and 34.11 ± 5.02% after 8 months. CONCLUSIONS: The two graft materials had a different volume reabsorption rate: 71% after 4 months and 90% after 8 months for dentin, and 6% after 4 months and 26% after 8 months for the xenograft. The space created by the dentin reabsorption increased the quantity of new bone.

Regeneration of Critical-Sized Mandibular Defects Using 3D-Printed Composite Scaffolds: A Quantitative Evaluation of New Bone Formation in In Vivo Studies.

Mandibular tissue engineering aims to develop synthetic substitutes for the regeneration of critical size defects (CSD) caused by a variety of events, including tumor surgery and post-traumatic resections. Currently, the gold standard clinical treatment of mandibular resections (i.e., autologous fibular flap) has many drawbacks, driving research efforts toward scaffold design and fabrication by additive manufacturing (AM) techniques. Once implanted, the scaffold acts as a support for native tissue and facilitates processes that contribute to its regeneration, such as cells infiltration, matrix deposition and angiogenesis. However, to fulfil these functions, scaffolds must provide bioactivity by mimicking natural properties of the mandible in terms of structure, composition and mechanical behavior. This review aims to present the state of the art of scaffolds made with AM techniques that are specifically employed in mandibular tissue engineering applications. Biomaterials chemical composition and scaffold structural properties are deeply discussed, along with strategies to promote osteogenesis (i.e., delivery of biomolecules, incorporation of stem cells, and approaches to induce vascularization in the constructs). Finally, a comparison of in vivo studies is made by taking into consideration the amount of new bone formation (NB), the CSD dimensions, and the animal model.

Human Osteochondral Explants as an Ex Vivo Model of Osteoarthritis for the Assessment of a Novel Class of Orthobiologics.

Osteoarthritis (OA) is a highly prevalent joint disease still lacking effective treatments. Its multifactorial etiology hampers the development of relevant preclinical models to evaluate innovative therapeutic solutions. In the last decade, the potential of Mesenchymal Stem Cell (MSC) secretome, or conditioned medium (CM), has emerged as an alternative to cell therapy. Here, we investigated the effects of the CM from adipose MSCs (ASCs), accounting for both soluble factors and extracellular vesicles, on human osteochondral explants. Biopsies, isolated from total knee replacement surgery, were cultured without additional treatment or with the CM from 106 ASCs, both in the absence and in the presence of 10 ng/mL TNFα. Tissue viability and several OA-related hallmarks were monitored at 1, 3 and 6 days. Specimen viability was maintained over culture. After 3 days, TNFα induced the enhancement of matrix metalloproteinase activity and glycosaminoglycan release, both efficiently counteracted by CM. The screening of inflammatory lipids, proteases and cytokines outlined interesting modulations, driving the attention to new players in the OA process. Here, we confirmed the promising beneficial action of ASC secretome in the OA context and profiled several bioactive factors involved in its progression, in the perspective of accelerating an answer to its unmet clinical needs.

Secretome of human adipose-derived mesenchymal stem cell relieves pain and neuroinflammation independently of the route of administration in experimental osteoarthritis.

OBJECTIVE: Treatment of pain associated with osteoarthritis (OA) is unsatisfactory and innovative approaches are needed. The secretome from human adipose-derived mesenchymal stem cells (hASC-Conditioned Medium, CM) has been successfully used to relieve painful symptoms in models of chronic pain. The aim of this study was to explore the efficacy of the hASC-CM to control pain and neuroinflammation in an animal model of OA. METHODS: OA was induced in mice by intra-articular monosodium-iodoacetate (MIA) injection. Thermal hyperalgesia and mechanical allodynia were assessed. Once hypersensitivity was established (7 days after MIA), hASC-CM was injected by IA, IPL and IV route and its effect monitored over time. Neuroinflammation in nerve, dorsal root ganglia and spinal cord was evaluated measuring proinflammatory markers and mediators by RT-qPCR. Protein content analysis of secretome by Mass Spectrometry was performed. RESULTS: A single injection with hASC-CM induced a fast and long lasting antihyperalgesic and antiallodynic effect. The IV route of administration appeared to be the most efficacious although all the treatments were effective. The effect on pain correlated with the ability of hASC-CM to reduce the neuroinflammatory condition in both the peripheral and central nervous system. Furthermore, the secretome analysis revealed 101 factors associated with immune regulation. CONCLUSION: We suggest that hASC-CM is a valid treatment option for controlling OA-related hypersensitivity, exerting a rapid and long lasting pain relief. The mechanisms underpinning its effects are likely linked to the positive modulation of neuroinflammation in peripheral and central nervous system that sustains peripheral and central sensitization.

Histological validation of adipogenic differentiation potential of ASC on collagen-based 2D scaffolds.

Determination of the adipogenic potential and behavior of adipose-derived mesenchymal stem/stromal cells (ASCs) is particularly relevant for their potential clinical application in regenerative medicine, especially when regeneration is supported by biomaterials or scaffolds. Scaffolds need to be able to induce tissue repair and limit undesired adipogenic differentiation. Depending on the scaffold employed, determination of cell behavior may be hindered by material interference with staining, which will limit either cells identification or dye quantification. Collagen is a promising biomaterial in regenerative medicine, however, histological analysis of cells cultured on collagen-based scaffolds is challenging. Here we describe a new histological method based on iron hematoxylin combined with Oil red O (ORO) staining, for the determination of the adipogenic differentiation of ASCs cultivated on a collagen-based 2D scaffold. ASCs were seeded on collagen films or plastic, differentiated into adipocytes for 14 days, and then stained with either ORO or iron hematoxylin and ORO combined. The collagen films avidly absorbed the ORO dye; conventional staining and quantification by dye extraction failed to discriminate between differentiated and undifferentiated cells on the films. On the contrary, the iron hematoxylin-ORO combination provided a quantitative and more reliable determination of adipocytes based on single cell count. This method is particularly recommended for determining the adipogenic differentiation potential of ASCs and other cell types grown on highly absorptive materials that need to be validated for their potential use in bioengineering and regenerative medicine.

Synthetic Blocks for Bone Regeneration: A Systematic Review and Meta-Analysis.

This systematic review is aimed at evaluating the effectiveness of synthetic block materials for bone augmentation in preclinical in vivo studies. An electronic search was performed on Pubmed, Scopus, EMBASE. Articles selected underwent risk-of-bias assessment. The outcomes were: new bone formation and residual graft with histomorphometry, radiographic bone density, soft tissue parameters, complications. Meta-analysis was performed to compare new bone formation in test (synthetic blocks) vs. control group (autogenous blocks or spontaneous healing). The search yielded 214 articles. After screening, 39 studies were included, all performed on animal models: rabbits (n = 18 studies), dogs (n = 4), rats (n = 7), minipigs (n = 4), goats (n = 4), and sheep (n = 2). The meta-analysis on rabbit studies showed significantly higher new bone formation for synthetic blocks with respect to autogenous blocks both at four-week (mean difference (MD): 5.91%, 95% confidence intervals (CI): 1.04, 10.79%, p = 0.02) and at eight-week healing (MD: 4.44%, 95% CI: 0.71, 8.17%, p = 0.02). Other animal models evidenced a trend for better outcomes with synthetic blocks, though only based on qualitative analysis. Synthetic blocks may represent a viable resource in bone regenerative surgery for achieving new bone formation. Differences in the animal models, the design of included studies, and the bone defects treated should be considered when generalizing the results. Clinical studies are needed to confirm the effectiveness of synthetic blocks in bone augmentation procedures.

Opposing roles of miR-21 and miR-29 in the progression of fibrosis in Duchenne muscular dystrophy.

Excessive extracellular matrix deposition progressively replacing muscle fibres is the endpoint of most severe muscle diseases. Recent data indicate major involvement of microRNAs in regulating pro- and anti-fibrotic genes. To investigate the roles of miR-21 and miR-29 in muscle fibrosis in Duchenne muscle dystrophy, we evaluated their expression in muscle biopsies from 14 patients, and in muscle-derived fibroblasts and myoblasts. In Duchenne muscle biopsies, miR-21 expression was significantly increased, and correlated directly with COL1A1 and COL6A1 transcript levels. MiR-21 expression was also significantly increased in Duchenne fibroblasts, more so after TGF-ß1 treatment. In Duchenne fibroblasts the expression of miR-21 target transcripts PTEN (phosphatase and tensin homolog deleted on chromosome 10) and SPRY-1 (Sprouty homolog 1) was significantly reduced; while collagen I and VI transcript levels and soluble collagen production were significantly increased. MiR-29a and miR-29c were significantly reduced in Duchenne muscle and myoblasts, and miR-29 target transcripts, COL3A1, FBN1 and YY1, significantly increased. MiR-21 silencing in mdx mice reduced fibrosis in the diaphragm muscle and in both Duchenne fibroblasts and mdx mice restored PTEN and SPRY-1 expression, and significantly reduced collagen I and VI expression; while miR-29 mimicking in Duchenne myoblasts significantly decreased miR-29 target transcripts. These findings indicate that miR-21 and miR-29 play opposing roles in Duchenne muscle fibrosis and suggest that pharmacological modulation of their expression has therapeutic potential for reducing fibrosis in this condition.

Fibrosis and inflammation are greater in muscles of beta-sarcoglycan-null mouse than mdx mouse.

The Sgcb-null mouse, with knocked-down ß-sarcoglycan, develops severe muscular dystrophy as in type 2E human limb girdle muscular dystrophy. The mdx mouse, lacking dystrophin, is the most used model for Duchenne muscular dystrophy (DMD). Unlike DMD, the mdx mouse has mild clinical features and shows little fibrosis in limb muscles. To characterize ECM protein deposition and the progression of muscle fibrosis, we evaluated protein and transcript levels of collagens I, III and VI, decorin, and TGF-ß1, in quadriceps and diaphragm, at 2, 4, 8, 12, 26, and 52 weeks in Sgcb-null mice, and protein levels at 12, 26, and 52 weeks in mdx mice. In Sgcb-null mice, severe morphological disruption was present from 4 weeks in both quadriceps and diaphragm, and included conspicuous deposition of extracellular matrix components. Histopathological features of Sgcb-null mouse muscles were similar to those of age-matched mdx muscles at all ages examined, but, in the Sgcb-null mouse, the extent of connective tissue deposition was generally greater than mdx. Furthermore, in the Sgcb-null mouse, the amount of all three collagen isoforms increased steadily, while, in the mdx, they remained stable. We also found that, at 12 weeks, macrophages were significantly more numerous in mildly inflamed areas of Sgcb-null quadriceps compared to mdx quadriceps (but not in highly inflamed regions), while, in the diaphragm, macrophages did not differ significantly between the two models, in either region. Osteopontin mRNA was also significantly greater at 12 weeks in laser-dissected highly inflamed areas of the Sgcb-null quadriceps compared to the mdx quadriceps. TGF-ß1 was present in areas of degeneration-regeneration, but levels were highly variable and in general did not differ significantly between the two models and controls. The roles of the various subtypes of macrophages in muscle repair and fibrosis in the two models require further study. The Sgcb-null mouse, which develops early fibrosis in limb muscles, appears more promising than the mdx mouse for probing pathogenetic mechanisms of muscle fibrosis and for developing anti-fibrotic treatments. Highlights • The Sgcb-null mouse develops severe muscular dystrophy, the mdx mouse does not. • Fibrosis developed earlier in Sgcb-null quadriceps and diaphragm than mdx. • Macrophages were commoner in mildly inflamed parts of Sgcb-null quadriceps than mdx. • The Sgcb-null model appears more useful than mdx for studying fibrotic mechanisms. • The Sgcb-null model also appears more useful for developing anti-fibrotic treatments.