Stereotactic body radiotherapy optimization to reduce the risk of carotid blowout syndrome using normal tissue complication probability objectives.

PURPOSE: To determine the possibility of further improving clinical stereotactic body radiotherapy (SBRT) plans using normal tissue complication probability (NTCP) objectives in order to minimize the risk for carotid blowout syndrome (CBOS). METHODS: 10 patients with inoperable locally recurrent head and neck cancer, who underwent SBRT using CyberKnife were analyzed. For each patient, three treatment plans were examined: (1) cone-based without delineation of the ipsilateral internal carotid (clinical plan used to treat the patients); (2) cone-based with the carotid retrospectively delineated and spared; and (3) Iris-based with carotid sparing. The dose-volume histograms of the target and primary organs at risk were calculated. The three sets of plans were compared based on dosimetric and TCP/NTCP (tumor control and normal tissue complication probabilities) metrics. For the NTCP values of carotid, the relative seriality model was used with the following parameters: D50 = 40 Gy, γ = 0.75, and s = 1.0. RESULTS: Across the 10 patient plans, the average TCP did not significantly change when the plans were re-optimized to spare the carotid. The estimated risk of CBOS was significantly decreased in the re-optimized plans, by 14.9% ± 7.4% for the cone-based plans and 17.7% ± 7.1% for the iris-based plans (p = 0.002 for both). The iris-based plans had significant (p = 0.02) reduced CBOS risk and delivery time (20.1% ± 7.4% time reduction, p = 0.002) compared to the cone-based plans. CONCLUSION: A significant improvement in the quality of the clinical plans could be achieved through the delineation of the internal carotids and the use of more modern treatment delivery modalities. In this way, for the same target coverage, a significant reduction in the risk of CBOS could be achieved. The range of risk reduction varied depending on the proximity of carotid artery to the target.

Common Error Pathways in CyberKnife™ Radiation Therapy.

Purpose/Objectives: Stereotactic radiosurgery (SRS) and stereotactic body radiation therapy (SBRT) may be considered "high risk" due to the high doses per fraction. We analyzed CyberKnife™ (CK) SRS and SBRT-related incidents that were prospectively reported to our in-house incident learning system (ILS) in order to identify severity, contributing factors, and common error pathways. Material and Methods: From 2012 to 2019, 221 reported incidents related to the 4,569 CK fractions delivered (5.8%) were prospectively analyzed by our multi-professional Quality and Safety Committee with regard to severity, contributing factors, as well as the location where the incident occurred (tripped), where it was discovered (caught), and the safety barriers that were traversed (crossed) on the CK process map. Based on the particular step in the process map that incidents tripped, we categorized incidents into general error pathways. Results: There were 205 severity grade 1-2 (did not reach patient or no clinical impact), 11 grade 3 (clinical impact unlikely), 5 grade 4 (altered the intended treatment), and 0 grade 5-6 (life-threatening or death) incidents, with human performance being the most common contributing factor (79% of incidents). Incidents most commonly tripped near the time when the practitioner requested CK simulation (e.g., pre-CK simulation fiducial marker placement) and most commonly caught during the physics pre-treatment checklist. The four general error pathways included pre-authorization, billing, and scheduling issues (n= 119); plan quality (n= 30); administration of IV contrast during simulation or pre-medications during treatment (n= 22); and image guidance (n= 12). Conclusion: Most CK incidents led to little or no patient harm and most were related to billing and scheduling issues. Suboptimal human performance appeared to be the most common contributing factor to CK incidents. Additional study is warranted to develop and share best practices to reduce incidents to further improve patient safety.

The American Society for Radiation Oncology's 2015 Core Physics Curriculum for Radiation Oncology Residents.

PURPOSE: The American Society for Radiation Oncology (ASTRO) Physics Core Curriculum Subcommittee (PCCSC) has updated the recommended physics curriculum for radiation oncology resident education to improve consistency in teaching, intensity, and subject matter. METHODS AND MATERIALS: The ASTRO PCCSC is composed of physicists and physicians involved in radiation oncology residency education. The PCCSC updated existing sections within the curriculum, created new sections, and attempted to provide additional clinical context to the curricular material through creation of practical clinical experiences. Finally, we reviewed the American Board of Radiology (ABR) blueprint of examination topics for correlation with this curriculum. RESULTS: The new curriculum represents 56 hours of resident physics didactic education, including a 4-hour initial orientation. The committee recommends completion of this curriculum at least twice to assure both timely presentation of material and re-emphasis after clinical experience. In addition, practical clinical physics and treatment planning modules were created as a supplement to the didactic training. Major changes to the curriculum include addition of Fundamental Physics, Stereotactic Radiosurgery/Stereotactic Body Radiation Therapy, and Safety and Incidents sections, and elimination of the Radiopharmaceutical Physics and Dosimetry and Hyperthermia sections. Simulation and Treatment Verification and optional Research and Development in Radiation Oncology sections were also added. A feedback loop was established with the ABR to help assure that the physics component of the ABR radiation oncology initial certification examination remains consistent with this curriculum. CONCLUSIONS: The ASTRO physics core curriculum for radiation oncology residents has been updated in an effort to identify the most important physics topics for preparing residents for careers in radiation oncology, to reflect changes in technology and practice since the publication of previous recommended curricula, and to provide practical training modules in clinical radiation oncology physics and treatment planning. The PCCSC is committed to keeping the curriculum current and consistent with the ABR examination blueprint.

Pilot study for compact microbeam radiation therapy using a carbon nanotube field emission micro-CT scanner.

PURPOSE: Microbeam radiation therapy (MRT) is defined as the use of parallel, microplanar x-ray beams with an energy spectrum between 50 and 300 keV for cancer treatment and brain radiosurgery. Up until now, the possibilities of MRT have mainly been studied using synchrotron sources due to their high flux (100s Gy/s) and approximately parallel x-ray paths. The authors have proposed a compact x-ray based MRT system capable of delivering MRT dose distributions at a high dose rate. This system would employ carbon nanotube (CNT) field emission technology to create an x-ray source array that surrounds the target of irradiation. Using such a geometry, multiple collimators would shape the irradiation from this array into multiple microbeams that would then overlap or interlace in the target region. This pilot study demonstrates the feasibility of attaining a high dose rate and parallel microbeam beams using such a system. METHODS: The microbeam dose distribution was generated by our CNT micro-CT scanner (100 µm focal spot) and a custom-made microbeam collimator. An alignment assembly was fabricated and attached to the scanner in order to collimate and superimpose beams coming from different gantry positions. The MRT dose distribution was measured using two orthogonal radiochromic films embedded inside a cylindrical phantom. This target was irradiated with microbeams incident from 44 different gantry angles to simulate an array of x-ray sources as in the proposed compact CNT-based MRT system. Finally, phantom translation in a direction perpendicular to the microplanar beams was used to simulate the use of multiple parallel microbeams. RESULTS: Microbeams delivered from 44 gantry angles were superimposed to form a single microbeam dose distribution in the phantom with a FWHM of 300 µm (calculated value was 290 µm). Also, during the multiple beam simulation, a peak to valley dose ratio of ~10 was found when the phantom translation distance was roughly 4x the beam width. The first prototype CNT-based x-ray tube dedicated to the development of compact MRT technology development was proposed and planned based on the preliminary experimental results presented here and the previous corresponding Monte Carlo simulations. CONCLUSIONS: The authors have demonstrated the feasibility of creating microbeam dose distributions at a high dose rate using a proposed compact MRT system. The flexibility of CNT field emission x-ray sources could possibly bring compact and low cost MRT devices to the larger research community and assist in the translational research of this promising new approach to radiation therapy.

The volumetric response of brain metastases after stereotactic radiosurgery and its post-treatment implications.

BACKGROUND: Changes in tumor volume are seen on magnetic resonance imaging within weeks after stereotactic radiosurgery (SRS), but it remains unclear what clinical outcomes early radiological changes portend. OBJECTIVE: We hypothesized that rapid, early reduction in tumor volume post-SRS is associated with prolonged local control and favorable clinical outcome. METHODS: A retrospective review of patients treated with CyberKnife SRS for brain metastases at the University of North Carolina from 2007 to 2009 was performed. Patients with at least 1 radiological follow-up, minimal initial tumor volume of 0.1 cm, no previous focal radiation, and no recent whole-brain radiation therapy were eligible for inclusion. RESULTS: Fifty-two patients with 100 metastatic brain lesions were analyzed and had a median follow-up of 15.6 months (range, 2-33 months) and a median of 2 (range, 1-8) metastatic lesions. In treated metastases in which there was a significant tumor volume reduction by 6 or 12 weeks post-SRS, there was no local progression for the duration of the study. Furthermore, patients with metastases that did not reduce in volume by 6 or 12 weeks post-SRS were more likely to require corticosteroids (P = .01) and to experience progression of neurological symptoms (P = .003). CONCLUSION: Significant volume reductions of brain metastases measured at either 6 or 12 weeks post-SRS were strongly associated with prolonged local control. Furthermore, early volume reduction was associated with less corticosteroid use and stable neurological symptoms.

Monte Carlo simulation of a compact microbeam radiotherapy system based on carbon nanotube field emission technology.

PURPOSE: Microbeam radiation therapy (MRT) is an experimental radiotherapy technique that has shown potent antitumor effects with minimal damage to normal tissue in animal studies. This unique form of radiation is currently only produced in a few large synchrotron accelerator research facilities in the world. To promote widespread translational research on this promising treatment technology we have proposed and are in the initial development stages of a compact MRT system that is based on carbon nanotube field emission x-ray technology. We report on a Monte Carlo based feasibility study of the compact MRT system design. METHODS: Monte Carlo calculations were performed using EGSnrc-based codes. The proposed small animal research MRT device design includes carbon nanotube cathodes shaped to match the corresponding MRT collimator apertures, a common reflection anode with filter, and a MRT collimator. Each collimator aperture is sized to deliver a beam width ranging from 30 to 200 µm at 18.6 cm source-to-axis distance. Design parameters studied with Monte Carlo include electron energy, cathode design, anode angle, filtration, and collimator design. Calculations were performed for single and multibeam configurations. RESULTS: Increasing the energy from 100 kVp to 160 kVp increased the photon fluence through the collimator by a factor of 1.7. Both energies produced a largely uniform fluence along the long dimension of the microbeam, with 5% decreases in intensity near the edges. The isocentric dose rate for 160 kVp was calculated to be 700 Gy∕min∕A in the center of a 3 cm diameter target. Scatter contributions resulting from collimator size were found to produce only small (<7%) changes in the dose rate for field widths greater than 50 µm. Dose vs depth was weakly dependent on filtration material. The peak-to-valley ratio varied from 10 to 100 as the separation between adjacent microbeams varies from 150 to 1000 µm. CONCLUSIONS: Monte Carlo simulations demonstrate that the proposed compact MRT system design is capable of delivering a sufficient dose rate and peak-to-valley ratio for small animal MRT studies.

Sensitivity analysis of an asymmetric Monte Carlo beam model of a Siemens Primus accelerator.

The assumption of cylindrical symmetry in radiotherapy accelerator models can pose a challenge for precise Monte Carlo modeling. This assumption makes it difficult to account for measured asymmetries in clinical dose distributions. We have performed a sensitivity study examining the effect of varying symmetric and asymmetric beam and geometric parameters of a Monte Carlo model for a Siemens PRIMUS accelerator. The accelerator and dose output were simulated using modified versions of BEAMnrc and DOSXYZnrc that allow lateral offsets of accelerator components and lateral and angular offsets for the incident electron beam. Dose distributions were studied for 40 × 40 cm² fields. The resulting dose distributions were analyzed for changes in flatness, symmetry, and off-axis ratio (OAR). The electron beam parameters having the greatest effect on the resulting dose distributions were found to be electron energy and angle of incidence, as high as 5% for a 0.25° deflection. Electron spot size and lateral offset of the electron beam were found to have a smaller impact. Variations in photon target thickness were found to have a small effect. Small lateral offsets of the flattening filter caused significant variation to the OAR. In general, the greatest sensitivity to accelerator parameters could be observed for higher energies and off-axis ratios closer to the central axis. Lateral and angular offsets of beam and accelerator components have strong effects on dose distributions, and should be included in any high-accuracy beam model.

A carbon nanotube field emission multipixel x-ray array source for microradiotherapy application.

The authors report a carbon nanotube (CNT) field emission multipixel x-ray array source for microradiotherapy for cancer research. The developed multipixel x-ray array source has 50 individually controllable pixels and it has several distinct advantages over other irradiation source including high-temporal resolution (millisecond level), the ability to electronically shape the form, and intensity distribution of the radiation fields. The x-ray array was generated by a CNT cathode array (5×10) chip with electron field emission. A dose rate on the order of >1.2 Gy∕min per x-ray pixel beam is achieved at the center of the irradiated volume. The measured dose rate is in good agreement with the Monte Carlo simulation result.

A nanotube based electron microbeam cellular irradiator for radiobiology research.

A prototype cellular irradiator utilizing a carbon nanotube (CNT) based field emission electron source has been developed for microscopic image-guided cellular region irradiation. The CNT cellular irradiation system has shown great potential to be a high temporal and spatial resolution research tool to enable researchers to gain a better understanding of the intricate cellular and intercellular microprocesses occurring following radiation deposition, which is essential to improving radiotherapy cancer treatment outcomes. In this paper, initial results of the system development are reported. The relationship between field emission current, the dose rate, and the dose distribution has been investigated. A beam size of 23 mum has been achieved with variable dose rates of 1-100 Gy/s, and the system dosimetry has been measured using a radiochromic film. Cell irradiation has been demonstrated by the visualization of H2AX phosphorylation at DNA double-strand break sites following irradiation in a rat fibroblast cell monolayer. The prototype single beam cellular irradiator is a preliminary step to a multipixel cell irradiator that is under development.

A novel high resolution micro-radiotherapy system for small animal irradiation for cancer research.

Micro-radiotherapy (micro-RT) system is specially designed for small animal (cancer cell) irradiation for basic and translational cancer research. We use carbon nanotube (CNT) field emission technology to develop a novel micro-RT system for image-guided high precision irradiation that is similar to the state of the art radiotherapy which our cancer patients receive today at mouse scale. Through the field emission control of its individually addressable x-ray pixel beams the micro-RT system electronically shapes the radiation field and forms intensity modulation pattern. In this paper, we present the development of a carbon nanotube field emission cathode array chip--a key component for our novel micro-RT system. The prototype micro-RT CNT field emission cathode array chip has 5 x 5 individually addressable cathode pixels that are 1 mm in diameter and 2 mm in pitch. An individual CNT cathode pixel is predicted to generate a dose rate in the order of 100 cGy/min at the center of the irradiated mouse based on our Monte Carlo simulation. The temporal and spatial resolutions of the micro-RT system are expected to be approximately ms level and < 2 mm respectively.