Mechanical anisotropic behavior of low-carbon steel processed by asymmetric rolling.

In the present work, the mechanical anisotropic behavior of low-carbon (Fe-0.07C) steel processed by asymmetric cold rolling was investigated. Three different types of dynamic recrystallization (DRX) mechanisms (continuous, discontinuous, and geometric) were observed in the microstructure of the 75 % cold-rolled sheet. The average intensity of γ-fiber was remarkably enhanced to 2.8 × R as rolling deformation increased to 50 % due to the formation of many deformation bands. After 75 % cold rolling, the average intensity of γ-fiber was significantly decreased to 1.4 × R due to the creation of new recrystallized grains. The results exhibited that the hardness of the low-carbon steel sheet was 260.1 HV by 75 % cold rolling, which was 1.75 times larger than the initial low-carbon steel sheet. With increasing deformation degree, the average yield and tensile strengths gradually improved and reached a peak value of 844.8 MPa and 881.7 MPa after 75 % cold rolling, respectively, which were 2.8 and 2.1 times that of the initial low-carbon steel sheet. By increasing the rolling reduction up to 50 %, the mechanical anisotropy gradually enhanced and by further increasing the cold deformation to 75 %, the anisotropy rapidly decreased due to the weakening of the γ-fiber texture. The strength was the highest along the transverse direction (90°) in all low-carbon steel sheets, and decreased at 0° and 45°. The dσ/dε-ε curves of the 50 % cold-rolled low-carbon steel sheet for the 45° and 90° tensile directions exhibited two distinct stages during the loading, however, that for the 0° revealed only one stage. A large number of parallel striations were present on the fracture surface of the 50 % deformed low-carbon steel sheet at 90° due to the presence of parallel deformation bands.

Bioactive chitosan biguanidine-based injectable hydrogels as a novel BMP-2 and VEGF carrier for osteogenesis of dental pulp stem cells.

Nowadays, vascularization and mineralization of bone defects is the main bottleneck in the bone regeneration field that is needed to be overcome and developed. Here, we prepared novel in-situ formed injectable hydrogels based on chitosan biguanidine and carboxymethylcellulose loaded with vascular endothelial growth factor (VEGF) and recombinant Bone morphogenetic protein 2 (BMP-2) and studied its influence on osteoblastic differentiation of dental pulp stem cells (DPSCs). The sequential release behavior of the VEGF and BMP-2 from hydrogels adjusted with the pattern of normal human bone growth. MTT assay exhibited that these hydrogels were non-toxic and significantly increased DPSCs proliferation. The Real-time PCR and Western blot analysis on CG11/BMP2-VEGF showed significantly higher gene and protein expression of ALP, COL1α1, and OCN. These results were confirmed by mineralization assay by Alizarin Red staining and Alkaline phosphatase enzyme activity. Based on these evaluations, these hydrogel holds potential as an injectable bone tissue engineering platform.

Preparation of chitosan biguanidine/PANI-containing self-healing semi-conductive waterborne scaffolds for bone tissue engineering.

Electrically conducting self-healing scaffolds are known as a new series of intelligent biomaterial for regulating Human Adipose Mesenchymal Stem Cells biological behaviors, especially their differentiation to bone cells. Herein, we developed a novel hydrophilic semi-conductive chitosan derivative (CP) and loaded it into the self-healing waterborne polyurethane structure, as a new osteogenic agent. The fabricated scaffolds exhibited excellent shape memory properties with shape fixity (> 97 %) and shape recovery ratio (> 98 %) with excellent self-healing value (> 93 %) at a temperature close to the body temperature. The results of MTT, cell attachment, alkaline phosphatase activity, and alizarin red staining analysis demonstrated that the CP-contained scaffolds promote proliferation of hADSCs and matrix mineralization. Also, by introducing the CP the gene expression level of COL-1, ALP, RUNX2, and OCN were significantly enhanced, in line with matrix mineralization. These multifunctional engineered constructs are promising biomaterials for repairing various bone defects.

Exploration of Sunflower Oil As a Renewable Biomass Source to Develop Scalable and Highly Effective Corrosion Inhibitors in a 15% HCl Medium at High Temperatures.

The feasibility study of utilizing sunflower oil as renewable biomass source to develop highly effective inhibitors for mild steel corrosion (MS) in the 15% HCl medium was done by weight loss, potentiodynamic polarization (PDP), dynamic electrochemical impedance spectroscopy (DEIS), and electrochemical impedance spectroscopy (EIS), supported with energy-dispersive X-ray (EDX), atomic force microscopy (AFM), and field-emission scanning electron microscope (FESEM) techniques. Moreover, a complementary theoretical investigation was carried out to clarify the inhibition mechanism of inhibitors by density functional theory (DFT), density functional based tight-binding (DFTB), and molecular dynamics (MD) simulation approaches. The obtained results confirm that sunflower-oil-based corrosion inhibitor (SFOCI) has a significant anticorrosion property toward the dissolution of MS in 15% HCl solution in the temperature range 20-80 °C. In addition, the results show that SFOCI could provide an inhibition efficiency of 98 and 93% at 60 and 80 °C, respectively. The inhibition mechanism of SFOCIs was mixed-type and their adsorption on the surface of MS was mainly chemisorption. The FESEM and EDX studies proved the presence of SFOCI molecules on the surface of MS. In addition, the adsorption energy of SFOCI indicated an intense interaction between the inhibitor and surface of Fe. The results of this study could open a new window for the design and development of scalable and effective eco-friendly vegetable-oil-based corrosion inhibitors for highly corrosive solutions at high temperatures.

Biocompatible electrospinning chitosan nanofibers: A novel delivery system with superior local cancer therapy.

In this study, an electrospinning technique was used for the fabrication of novel biomedicated nanofibers which are applied for preventing wound infections and local chemotherapy. CURs containing nanofibers with a crosslinking agent (Si-O-Si network) have been produced through functionalization of graphene oxide with APTES. In vitro drug release profile results showed the novel nanofibers could limit the drug's initial burst release and provide better sustainability in comparison with the blend nanofibers without modified GO. The novel delivery vehicle can inhibit the growth of MRSA and S. epidermidis up to 94% and 88%. Also in vitro cell toxicity experiments which were performed by XTT method on MCF-7, HEP G2 and L929 cell lines showed that anticancer activity of CUR remained intact even after loading into nanofibers. This result suggested that the fGO-Si-CUR including nanofibers were a promising candidate for postoperative chemotherapy.