Development of osteopromotive poly (octamethylene citrate glycerophosphate) for enhanced bone regeneration.

The design and development of bioactive materials that are inherently conducive for osteointegration and bone regeneration with tunable mechanical properties and degradation remains a challenge. Herein, we report the development of a new class of citrate-based materials with glycerophosphate salts, ß-glycerophosphate disodium (ß-GP-Na) and glycerophosphate calcium (GP-Ca), incorporated through a simple and convenient one-pot condensation reaction, which might address the above challenge in the search of suitable orthopedic biomaterials. Tensile strength of the resultant poly (octamethylene citrate glycerophosphate), POC-ßGP-Na and POC-GP-Ca, was as high as 28.2 ±â€¯2.44  MPa and 22.76 ±â€¯1.06  MPa, respectively. The initial modulus ranged from 5.28 ±â€¯0.56  MPa to 256.44 ±â€¯22.88  MPa. The mechanical properties and degradation rate of POC-GP could be controlled by varying the type of salts, and the feeding ratio of salts introduced. Particularly, POC-GP-Ca demonstrated better cytocompatibility and the corresponding composite POC-GP-Ca/hydroxyapatite (HA) also elicited improved osteogenic differentiation of human mesenchymal stem cells (hMSCs) in vitro, as compared to POC-ßGP-Na/HA and POC/HA. The superior in-vivo performance of POC-GP-Ca/HA microparticle scaffolds in promoting bone regeneration over POC-ßGP-Na/HA and POC/HA was further confirmed in a rabbit femoral condyle defect model. Taken together, the tunability of mechanical properties and degradation rates, together with the osteopromotive nature of POC-GP polymers make these materials, especially POC-GP-Ca well suited for bone tissue engineering applications. STATEMENT OF SIGNIFICANCE: The design and development of bioactive materials that are inherently conducive for osteointegration and bone regeneration with tunable mechanical properties and degradation remains a challenge. Herein, we report the development of a new class of citrate-based materials with glycerophosphate salts, ß-glycerophosphate disodium (ß-GPNa) and glycerophosphate calcium (GPCa), incorporated through a simple and convenient one-pot condensation reaction. The resultant POC-GP polymers showed significantly improved mechanical property and tunable degradation rate. Within the formulation investigated, POC-GPCa/HA composite further demonstrated better bioactivity in favoring osteogenic differentiation of hMSCs in vitro and promoted bone regeneration in rabbit femoral condyle defects. The development of POC-GP expands the repertoire of the well-recognized citrate-based biomaterials to meet the ever-increasing needs for functional biomaterials in tissue engineering and other biomedical applications.

Citrate-based materials fuel human stem cells by metabonegenic regulation.

A comprehensive understanding of the key microenvironmental signals regulating bone regeneration is pivotal for the effective design of bioinspired orthopedic materials. Here, we identified citrate as an osteopromotive factor and revealed its metabonegenic role in mediating citrate metabolism and its downstream effects on the osteogenic differentiation of human mesenchymal stem cells (hMSCs). Our studies show that extracellular citrate uptake through solute carrier family 13, member 5 (SLC13a5) supports osteogenic differentiation via regulation of energy-producing metabolic pathways, leading to elevated cell energy status that fuels the high metabolic demands of hMSC osteodifferentiation. We next identified citrate and phosphoserine (PSer) as a synergistic pair in polymeric design, exhibiting concerted action not only in metabonegenic potential for orthopedic regeneration but also in facile reactivity in a fluorescent system for materials tracking and imaging. We designed a citrate/phosphoserine-based photoluminescent biodegradable polymer (BPLP-PSer), which was fabricated into BPLP-PSer/hydroxyapatite composite microparticulate scaffolds that demonstrated significant improvements in bone regeneration and tissue response in rat femoral-condyle and cranial-defect models. We believe that the present study may inspire the development of new generations of biomimetic biomaterials that better recapitulate the metabolic microenvironments of stem cells to meet the dynamic needs of cellular growth, differentiation, and maturation for use in tissue engineering.

pH protective Y1 receptor ligand functionalized antiphagocytosis BPLP-WPU micelles for enhanced tumor imaging and therapy with prolonged survival time.

Nanoparticle-based tumor therapies are extensively studied; however, few are capable of improving patient survival time due to premature drug leakage, off target effects, and poor tissue penetration. Previously, we successfully synthesized a novel family of Y1 receptor (Y1R) ligand modified, photoluminescent BPLP nanobubbles and nanoparticles for targeted breast cancer ultrasound imaging; however, increased accumulation could also be observed in the liver, kidney, and spleen, suggesting significant interaction of the particles with macrophages in vivo. Herein, for the first time, we imparted antiphagocytosis capability to Y1R ligand functionalized BPLP-WPU polymeric micelles through the incorporation of a CD47 human glycoprotein based self-peptide. Application of self-peptide modified, DOX loaded micelles in vivo resulted in a 100% survival rate and complete tumor necrosis over 100 days of treatment. In vivo imaging of SPION loaded, self-peptide modified micelles revealed effective targeting to the tumor site while analysis of iron content demonstrated reduced particle accumulation in the liver and kidney, demonstrating reduced macrophage interaction, as well as a 2-fold increase of particles in the tumor. As these results demonstrate, Y1R ligand, self-peptide modified BPLP-WPU micelles are capable of target specific cancer treatment and imaging, making them ideal candidates to improve survival rate and tumor reduction clinically.

Development of Citrate-based Dual-Imaging Enabled Biodegradable Electroactive Polymers.

Increasing occurrences of degenerative diseases, defective tissues and severe cancers heighten the importance of advanced biomedical treatments, which in turn enhance the need for improved biomaterials with versatile theranostic functionalities yet using minimal design complexity. Leveraging the advantages of citrate chemistry, we developed a multifunctional citrate-based biomaterial platform with both imaging and therapeutic capabilities utilizing a facile and efficient one-pot synthesis. The resulting aniline tetramer doped biodegradable photoluminescent polymers (BPLPATs) not only possess programmable degradation profiles (<1 to >6 months) and mechanical strengths (~20 MPa to > 400 MPa), but also present a combination of intrinsic fluorescence, photoacoustic (PA) and electrical conductivity properties. BPLPAT nanoparticles are able to label cells for fluorescence imaging and perform deep tissue detection with PA imaging. Coupled with significant photothermal performance, BPLPAT nanoparticles demonstrate great potential for thermal treatment and in vivo real-time detection of cancers. Our results on BPLPAT scaffolds demonstrate three-dimensional (3D) high-spatial-resolution deep tissue PA imaging (23 mm), as well as promote growth and differentiation of PC-12 nerve cells. We envision that the biodegradable dual-imaging-enabled electroactive citrate-based biomaterial platform will expand the currently available theranostic material systems and open new avenues for diversified biomedical and biological applications via the demonstrated multi-functionality.

Neuropeptide Y Y1 receptor-mediated biodegradable photoluminescent nanobubbles as ultrasound contrast agents for targeted breast cancer imaging.

Targeted molecular imaging has attracted great attention in cancer diagnosis and treatment. However, most clinically used ultrasound contrast agents (UCAs) are non-targeted microbubbles seldom used for cancer imaging. Here, we fabricated fluorescent nanobubbles (NBs) by encapsulation of liquid tetradecafluorohexane (C6F14) within biodegradable photoluminescent polymers (BPLPs) through an emulsion-evaporation process and conjugation of PNBL-NPY ligand for specific targeting of Y1 receptors overexpressed in breast tumors. The developed PNBL-NPY modified NBs were uniform in size with good dispersibility and photostability, presenting good ultrasound enhancement. Further, in vitro and in vivo results indicated that the fabricated NBs exhibit high affinity and specificity to Y1 receptor-overexpressing breast cancer cells and tumors with minimal toxicity and damage to organs. Our developed PNBL-NPY-modified NBs are novel targeted UCAs for safe, efficient and specific targeted breast cancer imaging, and may provide a new nanoplatform for early cancer diagnosis and treatment in the future.

Click Cross-Linking-Improved Waterborne Polymers for Environment-Friendly Coatings and Adhesives.

Waterborne polymers, including waterborne polyurethanes (WPU), polyester dispersions (PED), and polyacrylate emulsions (PAE), are employed as environmentally friendly water-based coatings and adhesives. An efficient, fast, stable, and safe cross-linking strategy is always desirable to impart waterborne polymers with improved mechanical properties and water/solvent/thermal and abrasion resistance. For the first time, click chemistry was introduced into waterborne polymer systems as a cross-linking strategy. Click cross-linking rendered waterborne polymer films with significantly improved tensile strength, hardness, adhesion strength, and water/solvent resistance compared to traditional waterborne polymer films. For example, click cross-linked WPU (WPU-click) has dramatically improved the mechanical strength (tensile strength increased from 0.43 to 6.47 MPa, and Young's modulus increased from 3 to 40 MPa), hardness (increased from 59 to 73.1 MPa), and water resistance (water absorption percentage dropped from 200% to less than 20%); click cross-linked PED (PED-click) film also possessed more than 3 times higher tensile strength (∼28 MPa) than that of normal PED (∼8 MPa). The adhesion strength of click cross-linked PAE (PAE-click) to polypropylene (PP) was also improved (from 3 to 5.5 MPa). In addition, extra click groups can be preserved after click cross-linking for further functionalization of the waterborne polymeric coatings/adhesives. In this work, we have demonstrated that click modification could serve as a convenient and powerful approach to significantly improve the performance of a variety of traditional coatings and adhesives.

Synthesis and characterization of anti-bacterial and anti-fungal citrate-based mussel-inspired bioadhesives.

Bacterial and fungal infections in the use of surgical devices and medical implants remain a major concern. Traditional bioadhesives fail to incorporate anti-microbial properties, necessitating additional anti-microbial drug injection. Herein, by the introduction of the clinically used and inexpensive anti-fungal agent, 10-undecylenic acid (UA), into our recently developed injectable citrate-based mussel-inspired bioadhesives (iCMBAs), a new family of anti-bacterial and anti-fungal iCMBAs (AbAf iCs) was developed. AbAf iCs not only showed strong wet tissue adhesion strength, but also exhibited excellent in vitro cyto-compatibility, fast degradation, and strong initial and considerable long-term anti-bacterial and anti-fungal ability. For the first time, the biocompatibility and anti-microbial ability of sodium metaperiodate (PI), an oxidant used as a cross-linking initiator in the AbAf iCs system, was also thoroughly investigated. Our results suggest that the PI-based bioadhesives showed better anti-microbial properties compared to the unstable silver-based bioadhesive materials. In conclusion, AbAf iCs family can serve as excellent anti-bacterial and anti-fungal bioadhesive candidates for tissue/wound closure, wound dressing, and bone regeneration, especially when bacterial or fungal infections are a major concern.

Improving the miscibility of biodegradable polyester/polyphosphazene blends using cross-linkable polyphosphazene.

Biodegradable polyesters and polyphosphazenes are both promising biomaterials for tissue regeneration. A combination of both materials would provide additional advantages over the individual components in aspects of biocompatibility and osteocompatibility. Applications of polyester/polyphosphazene composites, however, were limited due to the severe phase separation. In this study, cross-linkable poly(glycine ethyl ester-co-hydroxyethyl methacrylate)phosphazene (PGHP) was synthesized. It was blended with poly(L-lactide) (PLLA) or poly(L-lactide-co-glycolide) (PLGA), using chloroform as a mutual solvent, and photo-crosslinked before solvent removal. The resulting PLLA (or PLGA)/PGHP composites demonstrated no significant phase separation due to the restricting function of the crosslinked PGHP polymeric network. In comparison with uncrosslinked blends, the mechanical properties of crosslinked composites were remarkably improved, which indicated their strong potential in bone regeneration applications.

Electrospun biodegradable polyorganophosphazene fibrous matrix with poly(dopamine) coating for bone regeneration.

Biodegradable polyphosphazenes were categorized as osteoinductive materials because of their phosphorus-containing feature; however, they were less supportive in cell attachment and proliferation at earlier points in comparison with biodegradable aliphatic polyesters. Therefore, mussel-inspired surface modification of poly(alanine ethyl ester-co-glycine ethyl ester)phosphazene (PAGP) was studied, intending to circumvent the above-mentioned disadvantage of polyphosphazene. To this end, PAGP and poly(L-lactide) (PLLA) were electrospun into nanofibrous substrates and surface treated with dopamine aqueous solution. With the analysis of scanning electron microscope, transmission electron microscope, X-ray photoelectron spectroscope, and Fourier transform infrared spectroscope, the successful poly(dopamine) coating was identified on both PAGP and PLLA nanofibers. MC3T3-E1 osteoblasts were found attaching and proliferating much well on poly(dopamine)-modified nanofibrous substrates in comparison with the pristine ones. In addition, the poly(dopamine) coating demonstrated high activity in promoting osteogenous differentiation. Because the phosphorus content on nanofiber surface was decreased with the poly(dopamine) coating, the poly(dopamine)-coated PAGP nanofibrous substrate was slightly inferior to pure PAGP nanofibrous substrate in osteogenous differentiation. In a summary, the results confirmed that poly(dopamine)-modified polyphosphazenes were promising scaffold materials with both high cell affinity and high osteocompatibility for bone regeneration.