A novel label-free electrochemical immunosensor for the detection of heat shock protein 70 of lung adenocarcinoma cell line following paclitaxel treatment using l-cysteine-functionalized Au@MnO2/MoO3 nanocomposites.

The future trend in achieving precision medicine involves the development of non-invasive cancer biomarker sensors that offer high accuracy, low cost, and time-saving benefits for risk clarification, early detection, disease detection, and therapeutic monitoring. A facile approach for the synthesis of MoO3 nanosheets was developed by thermally oxidizing MoS2 nanosheets in air followed by thermal annealing. Subsequently, Au@MnO2 nanocomposites were prepared using a combined hydrothermal process and in situ chemical synthesis. In this study, we present a novel immunosensor design strategy involving the immobilization of antiHSP70 antibodies on Au@MnO2/MoO3 nanocomposites modified on a screen-printed electrode (SPE) using EDC/NHS chemistry. This study establishes HSP70 as a potential biomarker for monitoring therapeutic response during anticancer therapy. Impedance measurements of HSP70 on the Au@MnO2/MoO3/SPE immunosensor using EIS showed an increase in impedance with an increase in HSP70 concentration. The electrochemical immunosensor demonstrated a good linear response in the range of 0.001 to 1000 ng mL-1 with a detection limit of 0.17 pg mL-1 under optimal conditions. Moreover, the immunosensor was effective in detecting HSP70 at low concentrations in a lung adenocarcinoma cell line following Paclitaxel treatment, indicating its potential for early detection of the HSP70 biomarker in organ-on-a-chip and clinical applications.

Highly Mimetic Ex Vivo Lung-Cancer Spheroid-Based Physiological Model for Clinical Precision Therapeutics.

Lung cancer remains a major health problem despite the considerable research into prevention and treatment methods. Through a deeper understanding of tumors, patient-specific ex vivo spheroid models with high specificity can be used to accurately investigate the cause, metastasis, and treatment strategies for lung cancer. Biofabricate lung tumors are presented, consisting of patient-derived tumor spheroids, endothelial cells, and lung decellularized extracellular matrix, which maintain a radial oxygen gradient, as well as biophysicochemical behaviors of the native tumors for precision medicine. It is also demonstrated that the developed lung-cancer spheroid model reproduces patient responses to chemotherapeutics and targeted therapy in a co-clinical trial, with 85% accuracy, 86.7% sensitivity, and 80% specificity. RNA sequencing analysis validates that the gene expression in the spheroids replicates that in the patient's primary tumor. This model can be used as an ex vivo predictive model for personalized cancer therapy and to improve the quality of clinical care.

Importance of surface charge of soot nanoparticles in determining inhalation toxicity in mice.

Physicochemical properties of nanoparticles are important in regulating nanoparticle toxicity; however, the contribution of nanoparticle charge remains unclear. The objective of this study was to investigate the pulmonary effects of inhalation of charged soot nanoparticles. We established a stably charged nanoparticle generation system for whole-body exposure in BALB/c mice, which produced positively charged, negatively charged, and neutral soot nanoparticles in a wide range of concentrations. After a 7-day exposure, pulmonary toxicity was assessed, together with proteomics analysis. The charged soot nanoparticles on average carried 1.17-1.35 electric charges, and the sizes for nanoparticles under different charging conditions were all fixed at 69 ~ 72 nm. We observed that charged soot nanoparticles induced cytotoxic LDH and increased lung permeability, with the release of 8-isoprostane and caspase-3 and systemic IL-6 in mice, especially for positively charged soot nanoparticles. Next, we observed that positive-charged soot nanoparticles upregulated Eif2, Eif4, sirtuin, mammalian target of rapamycin (mTOR), peroxisome proliferator-activated receptors (PPAR), and HIPPO-related signaling pathways in the lungs compared with negatively charged soot nanoparticles. HIF1α, sirt1, E-cadherin, and Yap were increased in mice's lungs by positively charged soot nanoparticle exposure. In conclusion, carbonaceous nanoparticles carrying electric ions, especially positive-charged, are particularly toxic when inhaled and should be of concern in terms of pulmonary health protection.

Noninvasive assessment of liver function reserve with fluorescent dosimetry of indocyanine green.

Using in vivo multiphoton fluorescent dosimetry, we demonstrate that the clearance dynamics of Indocyanine Green (ICG) in the blood can quickly reveal liver function reserve. In normal rats, the ICG retention rate was below 10% at the 15-minute post-administration; While in the rat with severe hepatocellular carcinoma (HCC), the 15-minute retention rate is over 40% due to poor liver metabolism. With a 785 nm CW laser, the fluorescence dosimeter can evaluate the liver function reserve at a 1/10 clinical dosage of ICG without any blood sampling. In the future, this low-dosage ICG 15-minute retention dosimetry can be applied for the preoperative assessment of hepatectomy or timely perioperative examination.

Genome-wide survey and identification of AP2/ERF genes involved in shoot and leaf development in Liriodendron chinense.

BACKGROUND: Liriodendron chinense is a distinctive ornamental tree species due to its unique leaves and tulip-like flowers. The discovery of genes involved in leaf development and morphogenesis is critical for uncovering the underlying genetic basis of these traits. Genes in the AP2/ERF family are recognized as plant-specific transcription factors that contribute to plant growth, hormone-induced development, ethylene response factors, and stress responses. RESULTS: In this study, we identified 104 putative AP2/ERF genes in the recently released L. chinense genome and transcriptome database. In addition, all 104 genes were grouped into four subfamilies, the AP2, ERF, RAV, and Soloist subfamilies. This classification was further supported by the results of gene structure and conserved motif analyses. Intriguingly, after application of a series test of cluster analysis, three AP2 genes, LcERF 94, LcERF 96, and LcERF 98, were identified as tissue-specific in buds based on the expression profiles of various tissues. These results were further validated via RT-qPCR assays and were highly consistent with the STC analysis. We further investigated the dynamic changes of immature leaves by dissecting fresh shoots into seven discontinuous periods, which were empirically identified as shoot apical meristem (SAM), leaf primordia and tender leaf developmental stages according to the anatomic structure. Subsequently, these three candidates were highly expressed in SAM and leaf primordia but rarely in tender leaves, indicating that they were mainly involved in early leaf development and morphogenesis. Moreover, these three genes displayed nuclear subcellular localizations through the transient transformation of tobacco epidermal cells. CONCLUSIONS: Overall, we identified 104 AP2/ERF family members at the genome-wide level and discerned three candidate genes that might participate in the development and morphogenesis of the leaf primordium in L. chinense.

Approximate Optimization Study of Light Curing Waterborne Polyurethane Materials for the Construction of 3D Printed Cytocompatible Cartilage Scaffolds.

Articular cartilage, which is a white transparent tissue with 1-2 mm thickness, is located in the interface between the two hard bones. The main functions of articular cartilage are stress transmission, absorption, and friction reduction. The cartilage cannot be repaired and regenerated once it has been damaged, and it needs to be replaced by artificial joints. Many approaches, such as artificial joint replacement, hyaluronic acid injection, microfracture surgery and cartilage tissue engineering have been applied in clinical treatment. Basically, some of these approaches are foreign material implantation for joint replacement to reach the goal of pain reduction and mechanism support. This study demonstrated another frontier in the research of cartilage reconstruction by applying regeneration medicine additive manufacturing (3D Printing) and stem cell technology. Light curing materials have been modified and tested to be printable and cytocompatible for stem cells in this research. Design of experiments (DOE) is adapted in this investigation to search for the optimal manufacturing parameter for biocompatible scaffold fabrication and stem cell attachment and growth. Based on the results, an optimal working process of biocompatible and printable scaffolds for cartilage regeneration is reported. We expect this study will facilitate the development of cartilage tissue engineering.

Genome-Wide Identification and Expression Analysis of R2R3-MYB Family Genes Associated with Petal Pigment Synthesis in Liriodendron.

The MYB transcription factor family is one of the largest families in plants, and its members have various biological functions. R2R3-MYB genes are involved in the synthesis of pigments that yield petal colors. Liriodendron plants are widely cultivated as ornamental trees owing to their peculiar leaves, tulip-like flowers, and colorful petals. However, the mechanism underlying petal coloring in this species is unknown, and minimal information about MYB genes in Liriodendron is available. Herein, this study aimed to discern gene(s) involved in petal coloration in Liriodendron via genome-wide identification, HPLC, and RT-qPCR assays. In total, 204 LcMYB superfamily genes were identified in the Liriodendron chinense genome, and 85 R2R3-MYB genes were mapped onto 19 chromosomes. Chromosome 4 contained the most (10) R2R3-MYB genes, and chromosomes 14 and 16 contained the fewest (only one). MEME analysis showed that R2R3-MYB proteins in L. chinense were highly conserved and that their exon-intron structures varied. The HPLC results showed that three major carotenoids were uniformly distributed in the petals of L. chinense, while lycopene and ß-carotene were concentrated in the orange band region in the petals of Liriodendron tulipifera. Furthermore, the expression profiles via RT-qPCR assays revealed that four R2R3-MYB genes were expressed at the highest levels at the S3P/S4P stage in L. tulipifera. This result combined with the HPLC results showed that these four R2R3-MYB genes might participate in carotenoid synthesis in the petals of L. tulipifera. This work laid a cornerstone for further functional characterization of R2R3-MYB genes in Liriodendron plants.

Functionalizing Collagen with Vessel-Penetrating Two-Photon Phosphorescence Probes: A New In Vivo Strategy to Map Oxygen Concentration in Tumor Microenvironment and Tissue Ischemia.

The encapsulation and/or surface modification can stabilize and protect the phosphorescence bio-probes but impede their intravenous delivery across biological barriers. Here, a new class of biocompatible rhenium (ReI ) diimine carbonyl complexes is developed, which can efficaciously permeate normal vessel walls and then functionalize the extravascular collagen matrixes as in situ oxygen sensor. Without protective agents, ReI -diimine complex already exhibits excellent emission yield (34%, λem   = 583 nm) and large two-photon absorption cross-sections (σ2   = 300 GM @ 800 nm) in water (pH 7.4). After extravasation, remarkably, the collagen-bound probes further enhanced their excitation efficiency by increasing the deoxygenated lifetime from 4.0 to 7.5 µs, paving a way to visualize tumor hypoxia and tissue ischemia in vivo. The post-extravasation functionalization of extracellular matrixes demonstrates a new methodology for biomaterial-empowered phosphorescence sensing and imaging.

Substitutions of strontium in bioactive calcium silicate bone cements stimulate osteogenic differentiation in human mesenchymal stem cells.

Calcium silicate cements have been considered as alternative bone substitutes owing to its extraordinary bioactivity and osteogenicity. Unfortunately, the major disadvantage of the cements was the slow degradation rate which may limit the efficiency of bone regeneration. In this study, we proposed a facile method to synthesize degradable calcium silicate cements by incorporating strontium into the cements through solid-state sintering. The effects of Sr incorporation on physicochemical and biological properties of the cements were evaluated. Although, our findings revealed that the incorporation of strontium retarded the hardening reaction of the cements, the setting time of different cements (11-19 min) were in the acceptable range for clinical use. The presence of Sr in the CS cements would hampered the precipitation of calcium phosphate products on the surface after immersion in SBF, however, a layer of precipitated calcium phosphate products can be formed on the surface of the Sr-CS cement within 1 day immersion in SBF. More importantly, the degradation rate of the cements increased with increasing content of strontium, consequentially raised the levels of released strontium and silicon ions. The elevated dissolving products may contribute to the enhancement of the cytocompatibility, alkaline phosphatase activity, osteocalcin secretion, and mineralization of human Wharton's jelly mesenchymal stem cells. Together, it is concluded that the strontium-incorporated calcium silicate cement might be a promising bone substitute that could accelerate the regeneration of irregularly shaped bone defects.

Osteogenic and angiogenic potentials of the cell-laden hydrogel/mussel-inspired calcium silicate complex hierarchical porous scaffold fabricated by 3D bioprinting.

3D printing has been popularly used in the bone tissue engineering, as many of the biomaterials for this field of study can be prepared for and produced from this additive manufacturing technique. In this study, we strategized a solvent-free processing to fabricate the polydopamine-modified calcium silicate (PDACS)/poly-caprolactone (PCL) scaffold with Wharton's jelly mesenchymal stem cells (WJMSCs) incorporated with human umbilical vein endothelial cells (HUVEC)-laden hydrogel. The PDACS/PCL/hydrogel 3D scaffold yielded a Young's modulus of the 3D scaffolds as high as 75 MPa. In addition, the vascular morphogenesis and cellular behaviors regulated by our hybrid scaffolds were also intricately evaluated. Furthermore, the HUVEC in the bioink exhibited higher levels of angiogenic biomarkers and showed potential for the formation of complex vascular networks. Higher levels of bone formation proteins were also observed in our composites. Such a hybrid of synthetic materials with cell constituents not only enhances osteogenesis but also stimulates vessel network development in angiogenesis, presenting the fact that 3D printing can be further applied in improving bone tissue regeneration in numerous aspects. We believe that this method may serve as a useful and effective approach for the regeneration of defective complex hard tissues in deep bone structures.

Bioactive calcium silicate/poly-ε-caprolactone composite scaffolds 3D printed under mild conditions for bone tissue engineering.

The present study provides a solvent-free processing method for establishing the ideal porous 3-dimension (3D) scaffold filled with different ratios of calcium silicate-based (CS) powder and polycaprolactone (PCL) for 3D bone substitute application. Characterization of hybrid scaffolds developed underwent assessments for physicochemical properties and biodegradation. Adhesion and growth of human Wharton's Jelly mesenchymal stem cells (WJMSCs) on the CS/PCL blended scaffold were investigated in vitro. Cell attachment and morphology were examined by scanning electron microscope (SEM) and confocal microscope observations. Colorimetric assay was tested for assessing cell metabolic activity. In addition, RT-qPCR was also performed for the osteogenic-related and angiogenesis-related gene expression. As a result, the hydrophilicity of the scaffolds was further significantly improved after we additive CS into PCL, as well as the compressive strength up to 5.8 MPa. SEM showed that a great amount of precipitated bone-like apatite formed on the scaffold surface after immersed in the simulated body fluid. The 3D-printed scaffolds were found to enhance cell adhesion, proliferation and differentiation. Additionally, results of osteogenesis and angiogenesis proteins were expressed obviously greater in the response of WJMSCs. These results indicate the CS/PCL composite exhibited a favorable bioactivity and osteoconductive properties that could be served as a promising biomaterial for bone tissue engineering scaffolds.

Anti-inflammation performance of curcumin-loaded mesoporous calcium silicate cement.

BACKGROUND/PURPOSE: Calcium silicate (CS) cements have excellent bioactivity and can induce the bone-like apatite formation. They are good biomaterials for bone tissue engineering and bone regenerative medicine. However, they have degradability and the dissolved CS can cause the inflammatory response at the early post-implantation stage. The purpose of this study was to design and prepare the curcumin-loaded mesoporous CS (MesoCS/curcumin) cements as a strategy to reduce the inflammatory reaction after implantation. METHODS: The MesoCS/curcumin cements were designed and prepared. The characteristics of MesoCS/curcumin specimens were examined by transmission electron microscopy (TEM), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Their physical properties, biocompatibility, and anti-inflammatory ability were also evaluated. RESULTS: The MesoCS/curcumin cements displayed excellent biocompatibility and physical properties. Their crystalline characterizations were very similar with MesoCS cements. After soaking in simulated body fluid, the bone-like apatite layer of the MesoCS/curcumin cements could be formed. In addition, it could inhibit the expression of tumor necrosis factor-α (TNF-α) and interleukin-1 (IL-1) after inflammation reaction induced by lipopolysaccharides and had good anti-inflammatory ability. CONCLUSION: Adding curcumin in MesoCS cements can reduce the inflammatory reaction, but does not affect the original biological activity and properties of MesoCS cements. It can provide a good strategy to inhibit the inflammatory reaction after implantation for bone tissue engineering and bone regenerative medicine.

Infrared-active quadruple contrast FePt nanoparticles for multiple scale molecular imaging.

A single nanomaterial with multiple imaging contrasts and functions is highly desired for multiscale theragnosis. Herein, we demonstrate single 1-1.9 µm infrared-active FePt alloy nanoparticles (FePt NPs) offering unprecedented four-contrast-in-one molecular imaging - computed tomography (CT), magnetic resonance imaging (MRI), photoacoustic (PA) imaging, and high-order multiphoton luminescence (HOMPL) microscopy. The PA response of FePt NPs outperforms that of infrared-active gold nanorods by 3- to 5.6-fold under identical excitation fluence and particle concentrations. HOMPL (680 nm) of an isolated FePt NP renders spatial full-width-at-half-maximum values of 432 nm and 300 nm beyond the optical diffraction limit for 1230-nm and 920-nm excitation, respectively. The in vivo targeting function was successfully visualized using HOMPL, PA imaging, CT, and MRI, thereby validating FePt as a single nanomaterial system covering up to four types (Optical/PA/CT/MRI) of molecular imaging contrast, ranging from the microscopic level to whole-body scale investigation.

Hinokitiol-Loaded Mesoporous Calcium Silicate Nanoparticles Induce Apoptotic Cell Death through Regulation of the Function of MDR1 in Lung Adenocarcinoma Cells.

Hinokitiol is a tropolone-related compound found in heartwood cupressaceous plants. Hinokitiol slows the growth of a variety of cancers through inhibition of cell proliferation. The low water solubility of hinokitiol leads to less bioavailability. This has been highlighted as a major limiting factor. In this study, mesoporous calcium silicate (MCS) nanoparticles, both pure and hinokitiol-loaded, were synthesized and their effects on A549 cells were analyzed. The results indicate that Hino-MCS nanoparticles induce apoptosis in higher concentration loads (>12.5 µg/mL) for A549 cells. Hino-MCS nanoparticles suppress gene and protein expression levels of multiple drug resistance protein 1 (MDR1). In addition, both the activity and the expression levels of caspase-3/-9 were measured in Hino-MCS nanoparticle-treated A549 cells. The Hino-MCS nanoparticles-triggered apoptosis was blocked by inhibitors of pan-caspase, caspase-3/-9, and antioxidant agents (N-acetylcysteine; NAC). The Hino-MCS nanoparticles enhance reactive oxygen species production and the protein expression levels of caspase-3/-9. Our data suggest that Hino-MCS nanoparticles trigger an intrinsic apoptotic pathway through regulating the function of MDR1 and the production of reactive oxygen species in A549 cells. Therefore, we believe that Hino-MCS nanoparticles may be efficacious in the treatment of drug-resistant human lung cancer in the future.

Imaging Endogenous Bilirubins with Two-Photon Fluorescence of Bilirubin Dimers.

On the basis of an infrared femtosecond Cr:forsterite laser, we developed a semiquantitative method to analyze the microscopic distribution of bilirubins. Using 1230 nm femtosecond pulses, we selectively excited the two-photon red fluorescence of bilirubin dimers around 660 nm. Autofluorescences from other endogenous fluorophores were greatly suppressed. Using this distinct fluorescence measure, we found that poorly differentiated hepatocellular carcinoma (HCC) tissues on average showed 3.7 times lower concentration of bilirubins than the corresponding nontumor parts. The corresponding fluorescence lifetime measurements indicated that HCC tissues exhibited a longer lifetime (500 ps) than that of nontumor parts (300 ps). Similarly, oral cancer cell lines had longer lifetimes (>330 ps) than those of nontumor ones (250 ps). We anticipate the developed methods of bilirubin molecular imaging to be useful in diagnosing cancers or studying the dynamics of bilirubin metabolisms in live cells.

Internal ribosome entry segment activity of ATXN8 opposite strand RNA.

Spinocerebellar ataxia type 8 (SCA8) involves the expansion of CTG/CAG repeats from the overlapping ataxin 8 opposite strand (ATXN8OS) and ataxin 8 (ATXN8) genes located on chromosome 13q21. Although being transcribed, spliced and polyadenylated in the CTG orientation, ATXN8OS does not itself appear to be protein coding, as only small open reading frames (ORFs) were noted. In the present study we investigated the translation of a novel 102 amino acids containing-ORF in the ATXN8OS RNA. Expression of chimeric construct with an in-frame ORF-EGFP gene demonstrated that ATXN8OS RNA is translatable. Using antiserum raised against ORF, ATXN8OS ORF expression was detected in various human cells including lymphoblastoid, embryonic kidney 293, neuroblastoma IMR-32, SK-N-SH, SH-SY5Y cells and human muscle tissue. The biological role of the ATXN8OS ORF and its connection to SCA8 remains to be determined.

Phosphorylation of mRNA decapping protein Dcp1a by the ERK signaling pathway during early differentiation of 3T3-L1 preadipocytes.

BACKGROUND: Turnover of mRNA is a critical step in the regulation of gene expression, and an important step in mRNA decay is removal of the 5' cap. We previously demonstrated that the expression of some immediate early gene mRNAs is controlled by RNA stability during early differentiation of 3T3-L1 preadipocytes. METHODOLOGY/PRINCIPAL FINDINGS: Here we show that the mouse decapping protein Dcp1a is phosphorylated via the ERK signaling pathway during early differentiation of preadipocytes. Mass spectrometry analysis and site-directed mutagenesis combined with a kinase assay identified ERK pathway-mediated dual phosphorylation at Ser 315 and Ser 319 of Dcp1a. To understand the functional effects of Dcp1a phosphorylation, we examined protein-protein interactions between Dcp1a and other decapping components with co-immunoprecipitation. Dcp1a interacted with Ddx6 and Edc3 through its proline-rich C-terminal extension, whereas the conserved EVH1 (enabled vasodilator-stimulated protein homology 1) domain in the N terminus of Dcp1a showed a stronger interaction with Dcp2. Once ERK signaling was activated, the interaction between Dcp1a and Ddx6, Edc3, or Edc4 was not affected by Dcp1a phosphorylation. Phosphorylated Dcp1a did, however, enhanced interaction with Dcp2. Protein complexes immunoprecipitated with the recombinant phosphomimetic Dcp1a(S315D/S319D) mutant contained more Dcp2 than did those immunoprecipitated with the nonphosphorylated Dcp1a(S315A/S319A) mutant. In addition, Dcp1a associated with AU-rich element (ARE)-containing mRNAs such as MAPK phosphatase-1 (MKP-1), whose mRNA stability was analyzed under the overexpression of Dcp1a constructs in the Dcp1a knockdown 3T3-L1 cells. CONCLUSIONS/SIGNIFICANCE: Our findings suggest that ERK-phosphorylated Dcp1a enhances its interaction with the decapping enzyme Dcp2 during early differentiation of 3T3-L1 cells.

Tristetraprolin inhibits poly(A)-tail synthesis in nuclear mRNA that contains AU-rich elements by interacting with poly(A)-binding protein nuclear 1.

BACKGROUND: Tristetraprolin binds mRNA AU-rich elements and thereby facilitates the destabilization of mature mRNA in the cytosol. METHODOLOGY/PRINCIPAL FINDINGS: To understand how tristetraprolin mechanistically functions, we biopanned with a phage-display library for proteins that interact with tristetraprolin and retrieved, among others, a fragment of poly(A)-binding protein nuclear 1, which assists in the 3'-polyadenylation of mRNA by binding to immature poly(A) tails and thereby increases the activity of poly(A) polymerase, which is directly responsible for polyadenylation. The tristetraprolin/poly(A)-binding protein nuclear 1 interaction was characterized using tristetraprolin and poly(A)-binding protein nuclear 1 deletion mutants in pull-down and co-immunoprecipitation assays. Tristetraprolin interacted with the carboxyl-terminal region of poly(A)-binding protein nuclear 1 via its tandem zinc finger domain and another region. Although tristetraprolin and poly(A)-binding protein nuclear 1 are located in both the cytoplasm and the nucleus, they interacted in vivo in only the nucleus. In vitro, tristetraprolin bound both poly(A)-binding protein nuclear 1 and poly(A) polymerase and thereby inhibited polyadenylation of AU-rich element-containing mRNAs encoding tumor necrosis factor α, GM-CSF, and interleukin-10. A tandem zinc finger domain-deleted tristetraprolin mutant was a less effective inhibitor. Expression of a tristetraprolin mutant restricted to the nucleus resulted in downregulation of an AU-rich element-containing tumor necrosis factor α/luciferase mRNA construct. CONCLUSION/SIGNIFICANCE: In addition to its known cytosolic mRNA-degrading function, tristetraprolin inhibits poly(A) tail synthesis by interacting with poly(A)-binding protein nuclear 1 in the nucleus to regulate expression of AU-rich element-containing mRNA.