Exploring copper (II) porphyrin complexes and their derivatives for electrochemical analysis and biological assessment in the study of breast cancer (MCF-7) cell lines.

In this study, several derivatives of tetraphenylporphyrin were synthesized, each with unique meso-substituent groups including phenyl, methoxyphenyl, butyloxyphenyl, octyloxyphenyl, and dectyloxyphenyl. Additionally, their corresponding copper complexes were prepared and thoroughly characterized. The structural confirmation of all compounds was established through CHN elemental analysis, mass spectrometry, and FT-IR spectroscopy. As the number of carbon atoms in the alkyl long-chain increased, a slight red shift in the electronic absorption band was observed, which was attributed to the electronic influence of the alkyl group. DFT analysis indicated that electron density predominantly localized on the porphyrin ring of both the metal free porphyrins and copper (II) porphyrin complexes, with relatively low electron density in the p orbital of the meso-aryl long-chain substituent group. EPR spectroscopy of the Copper (II) ion complexes revealed signals, indicating their paramagnetic properties. Additionally, the Copper (II) tetraphenylporphyrin (CuTPP) complexes displayed two reversible oxidation peaks at +0.97 V and +1.35 V, whereas other derivatives exhibited lower oxidation potentials. The cytotoxicity of these compounds against MCF-7 cell lines was assessed using MTT assay, revealing cytotoxic effects in all cases. Among them, Copper (II) tetrakis (4-methyloxyphenyl)porphyrin (CuTOMPP) demonstrated the highest potential, with an IC50 value of 32.07 µg/mL.

In situ synthesis of magnetic iron oxide nanoparticles in chitosan hydrogels as a reaction field: Effect of cross-linking density.

Magnetic iron oxides such as magnetite and γ-hematite have attracted considerable attention as thermoseeds for hyperthermia treatment because of their ability to generate heat under an alternating magnetic field. Control of the particle size and their combination with biocompatible polymers are expected to be beneficial for optimization of the nanoparticles. These processes can be accomplished through the synthesis of magnetite in gels, as the network structure of the polymer gel can control the grain growth of the magnetite. However, the effect of the cross-linking density of the gels remains unclear. In this study, we synthesized magnetic iron oxides in situ in chitosan hydrogels with different cross-linking densities and examined the crystalline structure and heat generation under alternating magnetic field. The crystalline phase and amount of magnetite were observed to be dependent on the cross-linking density of the gel, and the heat generation of the nanoparticles was governed by their crystalline structure and particle size rather than solely the amount of formed iron oxide.

Preparation of chitosan-hydroxyapatite composite mono-fiber using coagulation method and their mechanical properties.

Autograft has been carried out for anterior cruciate ligament (ACL) reconstruction surgery. However, it has negative aspect because patients lose their healthy ligaments from other part. We focus on a chitosan-hydroxyapatite (HAp) composite fiber as a scaffold of ligament regeneration. Chitosan- HAp composite fiber was made by using coagulation method. Chitosan-NaH2PO4 solution was coagulated with coagulation bath including calcium ion to get the mono-fiber and then treated with sodium hydroxide solution to form HAp in fiber matrix. The mechanical property of the fiber was improved by the stretching of the wet one because of the orientation of chitosan molecule and the interaction between chitosan and HAp. Maximum stress was improved with increasing of sodium dihydrogen phosphate until 0.03M. The swelling ratio of the fiber was inhibited by composited with HAp. Additionally, bone-bonding ability was confirmed by SBF soaking tests.

Enhanced biosafety of silica coated gadolinium based nanoparticles.

One of the most important and novel approaches of biomedical engineering is the development of new, effective and non-invasive medical diagnosis abilities, and treatments that have such requirements as advanced technologies for tumor imaging. Gadolinium (Gd) compounds can be used as MRI contrast agents, however the release of Gd3+ ions presents some adverse side effects such as renal failure, pancreatitis or local necrosis. The main aim of the work was the development and optimization of Gadolinium based nanoparticles coated with silica to be used as bioimaging agent. Gd based nanoparticles were prepared through a precipitation method and afterwards, these nanoparticles were covered with silica, using Stöber method with ammonia and functionalized with 3-Aminopropyltriethoxysilane (APTES). Results showed that nanoparticles were homogeneous regarding chemical composition, silica layer thickness, total size and morphology. Also, silica coating was successfully not degraded after 4 weeks at pH 5.5, 6.0 and 7.4, contrary to GdOHCO3 nanoparticles that degraded. Regarding the in vitro cell tests, very good cell proliferation and viability were observed. In conclusion, the results showed that Gd based nanoparticles coated with silica for imaging applications were successfully obtained under a well-controlled method. Furthermore, silica coating may enhance magnetic nanoparticles biosafety because it avoids GdOHCO3 degradation into harmful products (such as Gd3+ ions) at physiological conditions.

Calcium phosphate crystallization on titania in a flowing Kokubo solution.

Dry titania layers on air-oxidized titanium substrates have been found to be active enough to cause apatite to be deposited in Kokubo's simulated body fluid (SBF) in narrow confined spaces, such as those in narrow grooves and thin gaps. Such in vitro apatite deposition is the basis of the GRAPE(®) technique. The aim of the present study is to determine why GRAPE conditions favor apatite deposition when laminar SBF flow (at 0.01-0.3 ml/min) passes through a shallow channel (0.5 mm) between a pair of titanium substrates each with a dry layer of titania. Assessing the factors that control the heterogeneous nucleation process led to the proposal of the working hypothesis that there are nucleation pre-embryos, ion assemblies that can be stabilized to form embryos, on the titania layer but that they are removed by the SBF flow. Specimens were subjected to different combinations of processes. One combination was that titania layers were exposed to still or flowing SBF, and the other was that half of a specimen, the inlet or outlet side, was exposed to still or flowing SBF with the other half being covered. The surface morphologies of the specimens were then compared in detail. The conclusion was that exposure to still SBF for 2 days before exposure to flowing SBF was required for apatite to be deposited. Some complicated apatite deposition modes were observed, e.g., apatite was deposited even on areas unexposed to still SBF. All of the results were successfully interpreted using the working hypothesis. The conclusion was that the GRAPE(®) technique depends on the confined space holding pre-embryo and embryo assemblies.

The role of hybrid chitosan membranes on scarring process following lumbar surgery: post-laminectomy experimental model.

OBJECTIVES: Post-operative scarring process on lumbar surgery is object of several studies mainly because of the epidural fibrosis formation. Hybrid chitosan have shown promising effect on fibrosis prevention. The aim of this study was to determine the influence of chitosan-silane membrane on the lumbar surgery scarring process. These membranes have improved mechanical strength which makes them suitable to maintain a predefined shape. METHODS: A two level lumbar laminectomy was performed in 14 New Zealand male rabbits. Laminectomy sites were randomly selected for biomaterial or control. Chitosan membranes were prepared and care was taken in order to make it adapted to the bone defect dimensions covering the totality of the defect including the bone margins. Histological analysis was performed by haematoxylin/eosin and by Masson's trichrome staining four weeks after laminectomy. RESULTS: Microscope observations revealed the presence of a well-organized regenerating tissue, integrated in the surrounding vertebral bone tissue with a regular and all-site interface on the chitosan sites, in clear contrast with the presence of a disorganized regenerating tissue with aspects consistent with the persistence of a chronic inflammatory condition, on control sites. DISCUSSION: The results of this study clearly demonstrated that hybrid chitosan had an organizing effect on post-operative scarring process. The presence of the hybrid chitosan membrane resulted on a well-organized tissue integrated in the surrounding vertebral bone tissue with signs of regenerative bone tissue in continuity with native bone. This can be a major feature on the dynamics of epidural fibrosis formation.

Challenges for nerve repair using chitosan-siloxane hybrid porous scaffolds.

The treatment of peripheral nerve injuries remains one of the greatest challenges of neurosurgery, as functional recover is rarely satisfactory in these patients. Recently, biodegradable nerve guides have shown great potential for enhancing nerve regeneration. A major advantage of these nerve guides is that no foreign material remains after the device has fulfilled its task, which spares a second surgical intervention. Recently, we studied peripheral nerve regeneration using chitosan-γ-glycidoxypropyltrimethoxysilane (chitosan-GPTMS) porous hybrid membranes. In our studies, these porous membranes significantly improved nerve fiber regeneration and functional recovery in rat models of axonotmetic and neurotmetic sciatic nerve injuries. In particular, the number of regenerated myelinated nerve fibers and myelin thickness were significantly higher in rat treated with chitosan porous hybrid membranes, whether or not they were used in combination with mesenchymal stem cells isolated from the Wharton's jelly of the umbilical cord. In this review, we describe our findings on the use of chitosan-GPTMS hybrids for nerve regeneration.

Bisphosphonate release profiles from magnetite microspheres.

Hyperthermia has been suggested as a novel, minimally invasive cancer treatment method. After implantation of magnetic nano- or microparticles around a tumour through blood vessels, irradiation with alternating magnetic fields facilitates the efficient in situ hyperthermia even for deep-seated tumours. On the basis of this idea, if the microspheres are capable of delivering drugs, they could be promising multifunctional biomaterials effective for chemotherapy as well as hyperthermia. In the present study, magnetite microspheres were prepared by aggregation of the iron oxide colloid in water-in-oil (W/O) emulsion. The release behaviour of alendronate, a typical bisphosphonate, from the microspheres was examined in vitro as a model of the bone tumour prevention and treatment system. The alendronate was successfully incorporated onto the porous magnetite microspheres in vacuum conditions. The drug-loaded microspheres maintained their original spherical shapes even after shaking in ultrapure water for 3 days, suggesting that they have sufficient mechanical integrity for clinical use. It was attributed to high aggregation capability of the magnetite nanoparticles through van der Waals and weak magnetic attractions. The microspheres showed slow release of the alendronate in vitro, resulting from tight covalent or ionic interaction between the magnetite and the alendronate. The release rate was diffusion-controlled type and well controlled by the alendronate concentration in drug incorporation to the microspheres.

Use of hybrid chitosan membranes and human mesenchymal stem cells from the Wharton jelly of umbilical cord for promoting nerve regeneration in an axonotmesis rat model.

Many studies have been dedicated to the development of scaffolds for improving post-traumatic nerve regeneration. The goal of this study was to assess the effect on nerve regeneration, associating a hybrid chitosan membrane with non-differentiated human mesenchymal stem cells isolated from Wharton's jelly of umbilical cord, in peripheral nerve reconstruction after crush injury. Chromosome analysis on human mesenchymal stem cell line from Wharton's jelly was carried out and no structural alterations were found in metaphase. Chitosan membranes were previously tested in vitro, to assess their ability in supporting human mesenchymal stem cell survival, expansion, and differentiation. For the in vivo testing, Sasco Sprague adult rats were divided in 4 groups of 6 or 7 animals each: Group 1, sciatic axonotmesis injury without any other intervention (Group 1-Crush); Group 2, the axonotmesis lesion of 3 mm was infiltrated with a suspension of 1 250-1 500 human mesenchymal stem cells (total volume of 50 µL) (Group 2-CrushCell); Group 3, axonotmesis lesion of 3 mm was enwrapped with a chitosan type III membrane covered with a monolayer of non-differentiated human mesenchymal stem cells (Group 3-CrushChitIIICell) and Group 4, axonotmesis lesion of 3 mm was enwrapped with a chitosan type III membrane (Group 4-CrushChitIII). Motor and sensory functional recovery was evaluated throughout a healing period of 12 weeks using sciatic functional index, static sciatic index, extensor postural thrust, and withdrawal reflex latency. Stereological analysis was carried out on regenerated nerve fibers. Results showed that infiltration of human mesenchymal stem cells, or the combination of chitosan membrane enwrapment and human mesenchymal stem cell enrichment after nerve crush injury provide a slight advantage to post-traumatic nerve regeneration. Results obtained with chitosan type III membrane alone confirmed that they significantly improve post-traumatic axonal regrowth and may represent a very promising clinical tool in peripheral nerve reconstructive surgery. Yet, umbilical cord human mesenchymal stem cells, that can be expanded in culture and induced to form several different types of cells, may prove, in future experiments, to be a new source of cells for cell therapy, including targets such as peripheral nerve and muscle.

Synthesis and characterization of chitosan-silicate hydrogel as resorbable vehicle for bonelike-bone graft.

The use of bone grafts is required to restore skeletal integrity and enhance bone healing of large defects in several areas of regenerative medicine, such as: orthopedic and maxillofacial procedures. Some of these bone grafts can be resorbed in a time controlled way, in order to allow the correct process of natural re-construction of the involved bone tissue to occur. The Bonelike graft is a bone substitute that mimics the inorganic composition of bone; this biomaterial was developed and characterized over the last decade. In a granular form, Bonelike has proved its highly bioactive behavior in medical applications, such as; maxillofacial and orthopedics surgery. The clinical applications in maxillary bone defects indicated a good bone bonding between new formed bone and the Bonelike granules. The purpose of this study was to develop a new injectable system for the application of Bonelike using a resorbable vehicle which may be used in minimal invasive surgery. A new hydrogel derived from chitosan and y-glycidoxypropyltrimethoxysilane (GPTMS) was synthesized and characterized. The mixture derived from chitosan and GPTMS existed in sol state at room temperature and formed a hydrogel at 37 degrees C. The degradability of the hydrogel could be controlled by the concentration of chitosan and GPTMS, and the presence the presence of Bonelike did not affect its degradability. The pH changes caused by the degradation of this hydrogel were small, so it is not expected to cause any deleterious effect in vivo conditions.

Physical, chemical and in vitro biological profile of chitosan hybrid membrane as a function of organosiloxane concentration.

We attempted to prepare chitosan-silicate hybrid for use in a medical application and evaluated the physico-chemical properties and osteocompatibility of the hybrids as a function of gamma-glycidoxypropyltrimethoxysilane (GPTMS) concentration. Chitosan-silicate hybrids were synthesized using GPTMS as the reagent for cross-linking of the chitosan chains. Fourier transform infrared spectroscopy, (29)Si CP-MAS NMR spectroscopy and the ninhydrin assay were used to analyze the structures of the hybrids, and stress-strain curves were recorded to estimate their Young's modulus. The swelling ability, contact angle and cytocompatibility of the hybrids were investigated as a function of the GPTMS concentration. A certain fraction of GPTMS in each hybrid was linked at the epoxy group to the amino group of chitosan, which was associated with the change in the methoxysilane group of GPTMS due to hybridization. The cross-linking density was around 80% regardless of the volume of GPTMS. As the content of GPTMS increased, the water uptake decreased and the hydrophilicity of the hybrids increased except when the content exceeded amolar ratio of 1.5, when it caused a decrease. The values of the mechanical parameters assessed indicated that significant stiffening of the hybrids was obtained by the addition of GPTMS. The adhesion and proliferation of the MG63 osteoblast cells cultured on the chitosan-GPTMS hybrid surface were improved compared to those on the chitosan membrane, regardless of the GPTMS concentration. Moreover, human bone marrow osteoblast cells proliferated on the chitosan-GPTMS hybrid surface and formed a fibrillar extracellular matrix with numerous calcium phosphate globular structures, both in the presence and in the absence of dexamethasone. Therefore, the chitosan-GPTMS hybrids are promising candidates for basic materials that can promote bone regeneration because of their controllable composition (chitosan/GPTMS ratio).

Use of PLGA 90:10 scaffolds enriched with in vitro-differentiated neural cells for repairing rat sciatic nerve defects.

Poly(lactic-co-glycolic acid) (PLGA) nerve tube guides, made of a novel proportion (90:10) of the two polymers, poly(L-lactide): poly(glycolide) and covered with a neural cell line differentiated in vitro, were tested in vivo for promoting nerve regeneration across a 10-mm gap of the rat sciatic nerve. Before in vivo testing, the PLGA 90:10 tubes were tested in vitro for water uptake and mass loss and compared with collagen sheets. The water uptake of the PLGA tubes was lower, and the mass loss was more rapid and higher than those of the collagen sheets when immersed in phosphate-buffered saline (PBS) solution. The pH values of immersing PBS did not change after soaking the collagen sheets and showed to be around 7.4. On the other hand, the pH values of PBS after soaking PLGA tubes decreased gradually during 10 days reaching values around 3.5. For the in vivo testing, 22 Sasco Sprague adult rats were divided into four groups--group 1: gap not reconstructed; group 2: gap reconstructed using an autologous nerve graft; group 3: gap reconstructed with PLGA 90:10 tube guides; group 4: gap reconstructed with PLGA 90:10 tube guides covered with neural cells differentiated in vitro. Motor and sensory functional recovery was evaluated throughout a healing period of 20 weeks using sciatic functional index, static sciatic index, extensor postural thrust, withdrawal reflex latency, and ankle kinematics. Stereological analysis was carried out on regenerated nerve fibers. Both motor and sensory functions improved significantly in the three experimental nerve repair groups, although the rate and extent of recovery was significantly higher in the group where the gap was reconstructed using the autologous graft. The presence of neural cells covering the inside of the PLGA tube guides did not make any difference in the functional recovery. By contrast, morphometric analysis showed that the introduction of N1E-115 cells inside PLGA 90:10 tube guides led to a significant lower number and size of regenerated nerve fibers, suggesting thus that this approach is not adequate for promoting peripheral nerve repair. Further studies are warranted to assess the role of other cellular systems as a foreseeable therapeutic strategy in peripheral nerve regeneration.

In vitro cytocompatibility of MG63 cells on chitosan-organosiloxane hybrid membranes.

Chitosan-silicate hybrids were synthesized using gamma-glycidoxypropyltrimethoxysilane (GPSM) as the agent for cross-linking the chitosan chains. CaCl2 was introduced in the hybrids in expectation that it would improve cell adhesion and differentiation of the hybrid surfaces. Fourier-transform infrared (FT-IR) spectroscopy and 29Si CP-MAS NMR spectroscopy were used to analyze the structures of the hybrids. Cytocompatibility of the hybrids was investigated in terms of proliferation of an osteoblastic cell line, MG63. The adhesion and proliferation of the osteoblastic cells cultured on the surface of a chitosan-GPSM hybrid without calcium were similar to those on a control culture plate, and were better than those on a chitosan membrane. The ALP activity of the cells cultured on this hybrid was higher than that on the chitosan membrane. Contrary to expectations, the incorporation of calcium ions into the hybrids did not improve cell attachment and proliferation on their surfaces.