Application of fingernail samples as a biomarker for human exposure to arsenic-contaminated drinking waters.

This study evaluated the relationship between arsenic uptake via drinking water ingestion and arsenic concentration in fingernails as a biomarker for human exposure. For this purpose, we collected fingernail samples from 40 healthy participants of arsenic-affected rural regions of Kaboudrahang County, the west of Iran. A total of 49 fingernail samples were also collected from individuals who lived in areas where contamination of drinking water sources with arsenic had not been reported. It was found that the fingernails arsenic contents in 50 and 4.08% of the samples collected from arsenic-contaminated and reference villages were higher than the normal arsenic values of nails (0.43-1.08 µg/g), respectively. Based on the results of adjusted multiple linear regression, a significant association was found between groundwater and fingernails arsenic concentration (p < 0.001). Moreover, a statistically significant association was shown between arsenic in the fingernail samples and gender (p = 0.037). Fingernails arsenic contents were not significantly affected by other variables including age, smoking habits, and BMI (p > 0.05). In light of the results of this study, the use of biological indicators such as fingernail tissues due to easier sampling and less risk of external contamination is suitable for assessing exposure to heavy metals in contaminated areas.

Deterministic and probabilistic human health risk assessment approach of exposure to heavy metals in drinking water sources: A case study of a semi-arid region in the west of Iran.

In the current study, the concentration of heavy metals (Ba, Mn, Pb, and Cd) in drinking water resources of 328 villages in Hamadan Province were measured using ICP-OES apparatus during two dry (September 2018) and wet (April 2019) seasons. The assessment of the non-carcinogenic risk of selected heavy metals was conducted based on the recommendations of the USEPA. Also, sensitivity analysis and uncertainty of the effective variables were performed using Monte-Carlo simulations. Based on the results, Mn level in drinking water samples ranged 0.08-25.63 µg/L and 0.08-20.03 µg/L in dry and wet seasons, respectively. Similarly, Ba levels in water samples ranged 0.15-70.13 µg/L and 0.84-65 µg/L. Also, Cd and Pb concentrations in all sampling sites were below the limits of detection (LOD) of the ICP-OES apparatus. The hazard index (HI) values for adult and children were 2.17 × 10-3 and 3.29 × 10-3, respectively, which show a lack of non-carcinogenic risk for the examined heavy metals (Mn and Ba) to the local inhabitants. The results of the sensitivity analyses for adults and children revealed that two variables including metal concentration and ingestion rate of drinking water (IR) had the highest positive effects on the non-carcinogenic risk estimates. It was also found that there was no significant non-carcinogenic risk for the local residents in the studied area due to drinking water consumption.

The relationship between chronic exposure to arsenic through drinking water and hearing function in exposed population aged 10-49 years: A cross-sectional study.

It has been documented that arsenic has a potential risk to human health and identified as a risk factor for hearing impairment. However, there are few studies that confirm the ototoxic effect of arsenic, especially on the human auditory system. Therefore, the current study was conducted to investigate the correlation between auditory thresholds at different frequencies (0.25, 0.5, 1, 2, 4 and 8 kHz) and arsenic levels in drinking water samples. A total of 240 people, divided into two equal groups: exposed and reference, were selected for the auditory tests. It should be noted that, at frequencies from 0.25 to 1 kHz, no hearing loss was observed in the both groups. Based on the results, no significant correlations (p > 0.05) were found between hearing thresholds and confounding variables including gender and BMI. However, smoking and age are known to be the main variables for hearing loss in univariate regression analysis. In the case of age, the hearing loss risk in the older participants was increased compared with the younger participants (4 kHz (OR =1.09; 95% CI: 1.04, 1.13) and 8 kHz (OR =1.12; 95% CI: 1.06, 1.18)). Smoking habits had significant associations with hearing loss risk at 4 kHz (OR = 3.48; 95% CI: 1.47, 8.22) and 8 kHz (OR = 3.01; 95% CI: 1.14, 7.95). The multivariate regression analysis showed that age, smoking status, and exposure to arsenic were significantly associated with increased risk of hearing loss. Moreover, no statistically significant correlation (p˃0.05) was observed between arsenic exposure and hearing loss in the logistic regression model compared to the reference group. These outcomes suggest that further investigation and cohort studies with a larger number of participants should be conducted to find an association between arsenic exposure and hearing loss in general population.

Moving-bed biofilm reactor combined with three-dimensional electrochemical pretreatment (MBBR-3DE) for 2,4-D herbicide treatment: application for real wastewater, improvement of biodegradability.

2,4-Dichlorophenoxyacetic acid (2,4-D) is a herbicide that is considered as a carcinogenic and highly toxic contaminant, and due to its biological and chemical stability, its degradation is very difficult. Therefore, this study aimed to investigate a hybrid system's efficiency of three-dimensional electrochemical (3DE) process and a moving bed biofilm reactor (MBBR) in removing 2,4-D herbicides from aqueous solutions. In this experimental study, the electrochemical degradation of 2,4-D herbicide in a 3DE process with a G/ß-PbO2 anode was first investigated as a pretreatment process. Then, in the post-treatment stage, MBBR with continuous flow was used. The amount of aeration in the MBBR reactor was 4 L min-1, and the amount of dissolved oxygen (DO) was in the range of 3-5 mg L-1. The effect of various parameters such as hydraulic retention time (HRT) and filling ratio were investigated. The amount of sewage injection was set between 0.001-0.004 L min-1. Routine microbiological biochemical tests were used to detect bacteria. BOD5/COD, COD/TOC, AOS, and COS ratio parameters were used to determine the biodegradability of 2.4-D due to the effluent of the 3DE process. The results showed that with increasing current density, decreasing pH, decreasing herbicide concentration and increasing electrolysis time, the herbicide degradation efficiency increased by 3DE pretreatment process. Based on the results of MBBR post-treatment process efficiency, with increasing HRT and filling ratio, the herbicide removal efficiency increased. According to the results, the highest removal efficiencies of 2,4-D and COD herbicides were obtained during HRT of 24 h, and the filling ratio of 70% were 97.33% and 88.95%, respectively. The consortium of 2,4-D degrading bacteria identified in this study included E. coli, Enterobacter spp., Bacillus spp., Alcaligenes spp., Proteus spp., Acinetobacter spp., Pseudomonas spp., Arthrobacter, and Brevundimonas vesicularis. In the MBBR biological process, the reaction kinetics followed the Grau second-order model (R 2 = 0.98). In general, the results showed that the combined process of 3DE with G/ß-PbO2 anode and MBBR biological process has relatively high efficiency in 2,4-D herbicide degradation and can be used as a suitable complementary treatment method in wastewater containing non-degradable compounds such as phenoxy herbicides, e.g., 2,4-D should be used.

Determination of Pesticides Residues in Cucumbers Grown in Greenhouse and the Effect of Some Procedures on Their Residues.

BACKGROUND: The objective of this study was to determine the residual concentrations of ethion and imidacloprid in cucumbers grown in greenhouse. The effect of some simple processing procedures on both ethion and imidacloprid residues were also studied. METHODS: Ten active greenhouses that produce cucumber were randomly selected. Ethion and imidacloprid as the most widely used pesticides were measured in cucumber samples of studied greenhouses. Moreover, the effect of storing, washing, and peeling as simple processing procedures on both ethion and imidacloprid residues were investigated. RESULTS: One hour after pesticide application; the maximum residue levels (MRLs) of ethion and imidacloprid were higher than that of Codex standard level. One day after pesticide application, the levels of pesticides were decreased about 35 and 31% for ethion and imidacloprid, respectively, which still were higher than the MRL. Washing procedure led to about 51 and 42.5% loss in ethion and imidacloprid residues, respectively. Peeling procedure also led to highest loss of 93.4 and 63.7% in ethion and imidacloprid residues, respectively. The recovery for both target analytes was in the range between 88 and 102%. CONCLUSION: The residue values in collected samples one hour after pesticides application were higher than standard value. The storing, washing, and peeling procedures lead to the decrease of pesticide residues in greenhouse cucumbers. Among them, the peeling procedure has the greatest impact on residual reduction. Therefore, these procedures can be used as simple and effective processing techniques for reducing and removing pesticides from greenhouse products before their consumption.