Restoration-repair potential of resin-modified glass ionomer cement

Abstract: This in vitro study aimed to evaluate the repair bond strength of resin-modified glass ionomer cement using either the same material or a universal adhesive in the etch-and-rinse and self-etch modes plus resin composite. Twenty-four resin-modified glass ionomer cement blocks were stored in distilled water for 14 d and thermocycled. Sandpaper ground specimens were randomly assigned to three experimental groups according to the repair protocol: resin-modified glass ionomer cement (Riva Light Cure, SDI) and universal adhesive (Scotchbond Universal Adhesive, 3M Oral Care) in etch-and-rinse or self-etch modes and nanohybrid resin composite (Z350 XT, 3M Oral Care). After 24 h of water storage, the blocks were sectioned, and bonded sticks were subjected to the microtensile bond strength (μTBS) test. One-way ANOVA and Tukey's test were used to analyze the data. The failure mode was descriptively analyzed. The highest μTBS values were obtained when the resin-modified glass ionomer cement was repaired using the same material (p < 0.01). In addition, the mode of application of the universal adhesive system did not influence the repair bond strength of the resin-modified glass ionomer cement. Adhesive/mixed failures prevailed in all groups. Repair of resin-modified glass ionomers with the same material appears to be the preferred option to improve bond strength.

Taxa de publicação de resumos da área de Endodontia apresentados na Sociedade Brasileira de Pesquisa Odontológica entre 2013 e 2016 / Full-length publication rates of endodontic abstracts presented at the Brazilian Society of Oral Research meetings between 2013 and 2016

O conceito de Odontologia baseada em evidências requer a produção e publicação de pesquisas de alta qualidade em periódicos internacionais criteriosos. Objetivo: O presente estudo teve como objetivo avaliar as taxas de publicação de resumos endodônticos apresentados na reunião da SBPqO nos anos de 2013, 2014, 2015 e 2016. Material e Métodos: O fator de impacto e a classificação Qualis dos periódicos, e o tempo decorrido entre o congresso e a publicação completa também foram avaliados. Em seguida, foram classificados em seis categorias: pesquisa básica endodôntica, revisão de temas endodônticos, estudos clínicos, ensaios clínicos randomizados, pesquisa básica tecnológica ou relatos de caso. Uma pesquisa em bancos de dados eletrônicos usando o mecanismo Medline (PubMed) foi realizada de janeiro de 2018 a julho de 2018, para identificar publicações escritas em inglês com texto completo dos resumos endodônticos previamente selecionados. A identificação da publicação em texto completo dos resumos foi inicialmente realizada utilizando o sobre- nome do primeiro autor e as principais palavras-chave do título do resumo. Após a verificação do artigo em texto completo, informações adicionais foram registradas, tais como: tempo decorrido até a publicação; nome, fator de impacto e classificação Qualis da revista; e o tipo de estudo. Resultados: Após a leitura do conteúdo da reunião, 1.238 resumos (10,2%) foram considerados de interesse endodôntico e, em seguida, foi realizada uma busca eletrônica no banco de dados. Conclusão: Um grande número de resumos endodônticos não foi publicado como um manuscrito completo. Estudos clínicos e ensaios clínicos randomizados representaram uma pequena parte das publicações (AU).

Evidence-based dentistry consists in the clinical application of concepts based on researches pub- lished as scientific papers in indexed periodicals. Objective: This study aimed to evaluate the publication rates of endodontic abstracts presented in the meeting of SBPqO in the years of 2013, 2014, 2015 and 2016. Materials and Methods: Endodontic abstracts presented between 2013 and 2016 were included. Then, they were classified into six categories: endodontic basic research, review endodontic topics, clinical studies, randomized clinical trials, technological basic research or case reports. An electronic database search using the Medline (PubMed) engine was performed from January 2018 to July 2018 to identify full-text English-written publications of the endodontic abstracts previously selected. The identification of full-text publication of the abstracts was initially performed using the first authors last name and the main keywords from the title of the abstract. Following full-text article verification, additional information was recorded such as: elapsed time until publication; name, impact factor and Qualis classification of the journal; and type of study. Results: After reading the content of the meeting, 1,238 abstracts (10.2%) were considered to be of endodontic interest, and then an electronic database search was performed. Conclusion: A large number of endodontic abstracts were not published as a full-length manuscript. Clinical studies and randomized clinical trials represented the small part of the publications (AU).

Does use of silane-containing universal adhesive eliminate the need for silane application in direct composite repair?

Abstract This in vitro study aimed to evaluate the effect of a silane-containing universal adhesive used with or without a silane agent on the repair bond strength between aged and new composites. Forty nanohybrid composite resin blocks were stored in distilled water for 14 d and thermo-cycled. Sandpaper ground, etched, and rinsed speciments were randomly assigned into four experimental groups: silane + two-step etch-and-rinse adhesive system, two-step etch-and-rinse adhesive system, silane + silane-containing universal adhesive system, and silane-containing universal adhesive system. Blocks were repaired using the same composite. After 24 h of water storage, the blocks were sectioned and bonded sticks were submitted to microtensile testing. Ten unaged, non-repaired composite blocks were used as a reference group to evaluate the cohesive strength of the composite. Two-way ANOVA and Tukey's tests were used to analyze average µTBS. One-way ANOVA and Dunnet post-hoc tests were used to compare the cohesive strength values and bond strength obtained in the repaired groups (α = 0.05). The µTBS values were higher for the silane-containing universal adhesive compared to the two-step etch-and-rinse adhesive system (p = 0.002). Silane application improved the repair bond strength (p = 0.03). The repair bond strength ranged from 39.3 to 65.8% of the cohesive strength of the reference group. Using universal silane-containing adhesive improved the repair bond strength of composite resin compared to two-step etch-and-rinse adhesive. However, it still required prior application of a silane agent for best direct composite resin repair outcomes.