Two protocols for the detection of oleaginous bacteria using Oil Red O.

The selection of oleaginous bacteria, potentially applicable to biotechnological approaches, is usually carried out by different expensive and time-consuming techniques. In this study, we used Oil Red O (ORO) as an useful dye for staining of neutral lipids (triacylglycerols and wax esters) on thin-layer chromatography plates. ORO could detect minimal quantities of both compounds (detection limit, 0.0025 mg of tripalmitin or 0.005 mg of cetylpalmitate). In addition, we developed a specific, rapid, and inexpensive screening methodology to detect triacylglycerol-accumulating microorganisms grown on the agar plate. This staining methodology detected 9/13 strains with a triacylglycerol content higher than 20% by cellular dry weight. ORO did not stain polyhydroxyalkanoates-producing bacteria. The four oleaginous strains not detected by this screening methodology exhibited a mucoid morphology of their colonies. Apparently, an extracellular polymeric substance produced by these strains hampered the entry of the lipophilic dye into cells. The utilization of the developed screening methodology would allow selecting of oleaginous bacteria in a simpler and faster way than techniques usually used nowadays, based on unspecific staining protocols and spectrophotometric or chromatographic methods. Furthermore, the use of ORO as a staining reagent would easily characterize the neutral lipids accumulated by microorganisms as reserve compounds. KEY POINTS: • Oil Red O staining is specific for triacylglycerols • Oil Red O staining is useful to detect oleaginous bacteria • Fast and inexpensive staining to isolate oleaginous bacteria from the environment.

Cyanophycin modifications for applications in tissue scaffolding.

Cyanophycin (CGP) is a polypeptide consisting of amino acids-aspartic acid in the backbone and arginine in the side chain. Owing to its resemblance to cell adhesive motifs in the body, it can be considered suitable for use in biomedical applications as a novel component to facilitate cell attachment and tissue regeneration. Although it has vast potential applications, starting with nutrition, through drug delivery and tissue engineering to the production of value-added chemicals and biomaterials, CGP has not been brought to the industry yet. To develop scaffolds using CGP powder produced by bacteria, its properties (e.g., biocompatibility, morphology, biodegradability, and mechanical strength) should be tailored in terms of the requirements of the targeted tissue. Crosslinking commonly stands for a primary modification method for renovating biomaterial features to these extents. Herein, we aimed to crosslink CGP for the first time and present a comparative study of different methods of CGP crosslinking including chemical, physical, and enzymatic methods by utilizing glutaraldehyde (GTA), UV exposure, genipin, 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS), and monoamine oxidase (MAO). Crosslinking efficacy varied among the samples crosslinked via the different crosslinking methods. All crosslinked CGP were non-cytotoxic to L929 cells, except for the groups with higher GTA concentrations. We conclude that CGP is a promising candidate for scaffolding purposes to be used as part of a composite with other biomaterials to maintain the integrity of scaffolds. The initiative study demonstrated the unknown characteristics of crosslinked CGP, even though its feasibility for biomedical applications should be confirmed by further examinations. KEY POINTS: • Cyanophycin was crosslinked by 5 different methods • Crosslinked cyanophycin is non-cytotoxic to L929 cells • Crosslinked cyanophycin is a promising new material for scaffolding purposes.

A comparative study between two carboxymethylated polysaccharides/protein electrostatic and cross-linked nanogels constructed for caffeic acid and eugenol delivery.

In response to the pressing demand for functional nanomaterials synthesis and applications, two polyelectrolyte complexes (PECs) [electrostatic and cross-linked nanogels (NGs)] loaded individually with caffeic acid (CafA) and eugenol (Eug) demonstrating multifunctionalities were proposed for the first time. Curdlan (Curd) and glucomannan (GM) were carboxymethylated (CMCurd and CMGM) successfully and polymeric ratios of 1:1 and 4:1 (v/v) for chitosan (Cs): CMCurd and lactoferrin (Lf): CMGM were selected for the synthesis of Cs/CMCurd and Lf/CMGM NGs. Due to the use of EDC/NHS, Cs/CMCurd/CafA and Lf/CMGM/Eug NGs possessed very uniform particles sizes of 177 ± 18 and 230 ± 17 nm with marked encapsulation efficiencies (EEs) of 76 ± 4 and 88 ± 3 %, respectively. The formation of a carbonyl-amide linkage in both cross-linked NGs was confirmed by FTIR. It should be noted, the self-assembly was not reliable in retaining enough of the encapsulated compounds. Owing to the excellent physicochemical characteristics of the loaded cross-linked NGs, they were prioritized over the electrostatic ones. Both Cs/CMCurd/CafA and Lf/CMGM/Eug NGs exhibited high colloidal stability over 12 weeks, elevated hemocompatibility, and in vitro serum stability. The generated NGs were also tailored to possess controlled release profiles for CafA and Eug over 72 h. Cs/CMCurd/CafA and Lf/CMGM/Eug NGs had promising antioxidant efficacies and could remarkably inhibit 4 bacterial pathogens at low 2-16 µg/mL concentration of encapsulated NGs compared to their unencapsulated counterparts. Interestingly, the respective NGs could significantly decline the IC50 against colorectal cancer HCT-116 than conventional drugs. Based on these data, it was conferred that the investigated NGs could be promising candidates for functional foods and pharmaceutics.

Theoretical Studies of Cyanophycin Dipeptides as Inhibitors of Tyrosinases.

The three-dimensional structure of tyrosinase has been crystallized from many species but not from Homo sapiens. Tyrosinase is a key enzyme in melanin biosynthesis, being an important target for melanoma and skin-whitening cosmetics. Several studies employed the structure of tyrosinase from Agaricus bisporus as a model enzyme. Recently, 98% of human genome proteins were elucidated by AlphaFold. Herein, the AlphaFold structure of human tyrosinase and the previous model were compared. Moreover, tyrosinase-related proteins 1 and 2 were included, along with inhibition studies employing kojic and cinnamic acids. Peptides are widely studied for their inhibitory activity of skin-related enzymes. Cyanophycin is an amino acid polymer produced by cyanobacteria and is built of aspartic acid and arginine; arginine can be also replaced by other amino acids. A new set of cyanophycin-derived dipeptides was evaluated as potential inhibitors. Aspartate-glutamate showed the strongest interaction and was chosen as a leading compound for future studies.

Functional analysis of active amino acid residues of the mercaptosuccinate dioxygenase of Variovorax paradoxus B4.

Thiol dioxygenases are non-heme mononuclear-iron proteins and belong to the cupin superfamily. In 2014, mercaptosuccinate dioxygenase (Msdo) of Variovorax paradoxus B4 was identified as another bacterial cysteine dioxygenase (Cdo) homolog catalyzing the conversion of mercaptosuccinate (MS) into succinate and sulfite. To gain further insights into potentially important amino acid residues for enzyme activity, seven enzyme variants were generated and analyzed. (i) Three variants comprised the substitution of one conserved histidine residue each by leucine, either supposed to be mandatory for coordination of the Fe(II) cofactor (H93 and H95) or to be important for substrate positioning within the active site (H163). The corresponding enzyme variants were completely inactive confirming their essential roles for enzyme activity. (ii) Mutation C100S resulted as well in an inactive enzyme demonstrating its importance for either stability or activity of the protein. (iii) For eukaryotic Cdo, a hydrogen bond network for substrate positioning was postulated, and the corresponding amino acids are basically present in Msdo. Albeit the MsdoQ64A mutation exhibited an increased Km of 0.29 mM when compared to the wildtype with 0.06 mM, it did not significantly affect the specific activity. (iv) The variant MsdoR66A showed only very low activity even when high amounts of enzyme were applied indicating that this residue might be important for catalysis. (v) No strong effect had the mutation Y165F for which a specific enzyme activity of 10.22 µmol min-1 mg-1 protein and a Km value of 0.06 mM with high similarity to those of the wildtype enzyme were obtained. This residue corresponds to Y157 of human Cdo, which is part of the catalytic triad and is supposed to be involved in substrate positioning. Apparently, another residue could fulfill this role in Msdo, since the loss of Y165 did not have a strong effect.

Recent developments in non-biodegradable biopolymers: Precursors, production processes, and future perspectives.

During the last decades, biopolymers experienced a renaissance. The increasing limitation of fossil resources in combination with a public demand for environmental-friendly and sustainable processes has led to the formation of a market for biobased plastics. Especially non-biodegradable bioplastics are very interesting materials, as they combine the benefits of reduced carbon footprint during production and increased resource efficiency with the persistence to microbial degradation. Consequently, persistent biomass-derived plastic materials are highly promising to substitute conventional fossil-based plastics in applications, which require durability and longevity. Non-biodegradable bioplastics derived from renewable resources represent 57% of all bioplastics with partially biobased polyethylene terephthalate currently leading the market, followed by biobased polyamides and fully biomass-derived polyethylene. An exceptional biopolymer with thermoplastic properties was discovered only two decades ago, when-for the first time-polythioesters were synthesized by microbial fermentation. Though synthesized by bacteria, it turned out that polythioesters are non-biodegradable by microorganisms in contrast to all other biopolymers and thus, represent a novel non-biodegradable bioplastic material. This review gives an overview about the recent development and progress regarding bioplastics with special focus on persistent bioplastics. We describe the generation of the respective monomers from biomass-derived substrates and summarize the current status of production, which range from the laboratory-scale up to large-scale industrial processes.

Cyanophycin production from feather hydrolysate using biotechnological methods.

Cyanophycin is a bacterial storage polymer for carbon, nitrogen and energy with emerging industrial applications. As efficient cyanophycin production is enhanced by peptone, but commercial peptones are very expensive, thereby increasing the overall production cost, an enzymatically produced feather hydrolysate (FH) is assessed as a cheap replacement of peptone to lower the costs and make cyanophycin production more economically feasible. Keratinase production using feather as the sole carbon/nitrogen source by S.pactum 40530 at 30-L fermentation scale was achieved within 93 h with degradation rate of 96.5%. A concentration of 60 g/L of FH, generated by keratinolytic activity (8 × 103 U g-1L-1d-1) within 24 h, was used as the main carbon/peptone source to produce cyanophycin. The growth performances of E. coli DapE/L using FH was compared to that of casamino acids (CA) and up to 7.1 ± 0.4 and 5.3 ± 0.3 g/L of cell mass were obtained after 72 h from FH and CA, respectively. Cyanophycin production yielded 1.4 ± 0.1g/L for FH with average molecular mass of 28.8 and 1.4 ± 0.2 for CA with average molecular mass of 35.3, after 60 h. For the first time, FH generated by biotechnological methods from environmentally problematic, abundant and renewable feather bioresource was successfully used for cyanophycin biopolymer production.

In vitro biosynthesis of 3-mercaptolactate by lactate dehydrogenases.

3-Mercaptolactate (3ML) is an interesting mercapto compound with special regard to the biosynthesis of new polythioesters (PTEs). Unfortunately, this thioester analog of lactic acid is currently not commercially available. For this reason, we developed an in vitro biosynthesis pathway to convert cysteine to 3-mercaptopyruvate (3MPy), which is then rapidly and efficiently converted to 3ML by suitable lactate dehydrogenases (LDHs). As liver LDH from Rattus norvegicus (LDHRn) was previously described to Exhibit 3MPy reduction activity, in silico studies based on homology to LDHRn were performed and led to the identification of four potentially suitable bacterial LDH candidates from Escherichia coli (LDHEc), Corynebacterium glutamicum (LDHCg), Bacillus cereus (LDHBc) and Gloeobacter violaceus (LDHGv). After heterologous expression in E. coli followed by purification, the enzymes were assessed for their potential to reduce 3MPy to 3ML in comparison to LDHRn. With 3MPy, LDHs from E. coli, C. glutamicum and B. cereus showed no or only very low specific activities of 0.23±0.1U/mg (LDHCg) and 0.08±0.2U/mg (LDHBc), respectively. In contrast, LDHGv exhibited a remarkable specific activity of 63.6±8.1U/mg, being even twice as active as the R. norvegicus LDH. To verify LDH-catalyzed biosynthesis of 3ML we developed and optimized a detection method allowing qualitative analysis and quantification of 3MPy and 3ML by derivatization with Ellman's reagent and liquid chromatography-mass spectrometry. This study shows once more the impressive versatility of LDHs and presents a rapid and efficient biosynthesis process for 3ML, a biotechnologically interesting, yet hard-to-obtain, compound.

Studies on the aerobic utilization of synthesis gas (syngas) by wild type and recombinant strains of Ralstonia eutropha H16.

The biotechnical platform strain Ralstonia eutropha H16 was genetically engineered to express a cox subcluster of the carboxydotrophic Oligotropha carboxidovoransOM5, including (i) the structural genes coxM, -S and -L, coding for an aerobic carbon monoxide dehydrogenase (CODH) and (ii) the genes coxD, -E, -F and -G, essential for the maturation of CODH. The coxOc genes expressed under control of the CO2 -inducible promoter PL enabled R. eutropha to oxidize CO to CO2 for the use as carbon source, as demonstrated by 13 CO experiments, but the recombinant strains remained dependent on H2 as external energy supply. Therefore, a synthetic metabolism, which could be described as 'carboxyhydrogenotrophic', was established in R. eutropha. With this extension of the bacterium's substrate range, growth in CO-, H2 - and CO2 -containing artificial synthesis gas atmosphere was enhanced, and poly(3-hydroxybutyrate) synthesis was increased by more than 20%.

Sphingomonas jeddahensis sp. nov., isolated from Saudi Arabian desert soil.

A novel Sphingomonas strain was isolated from a sample of desert soil collected near Jeddah in Saudi Arabia. A polyphasic approach was performed to characterize this strain, initially designated as G39T. Cells of strain G39T are motile, Gram-negative, catalase- and oxidase-positive. The strain is able to grow aerobically at 20-35 °C, pH 6.5-8 and tolerates up to 4 % (w/v) NaCl. Based on 16S rRNA gene sequence similarity, the closest relative type strains of G39T are Sphingomonas mucosissima DSM 17494T (98.6 %), S. dokdonensis DSM 21029T (98.4 %) and S. hankookensis DSM 23329T (97.4 %). Furthermore, the average nucleotide identities between the draft genome sequence of strain G39T and the genome sequences of all other available and related Sphingomonas species are significantly below the threshold of 94 %. The G+C content of the draft genome (3.12 Mbp) is 65.84 %. The prevalent (>5 %) cellular fatty acids of G39T were C18 : 1ω7c, C16 : 1ω7c and/or C16 : 1ω6c, C14 : 0 2-OH and C16 : 0. The only detectable respiratory quinone was ubiquinone-10 and the polar lipids profile is composed of diphosphatidylglycerol, phosphatidylglycerol, phosphatidylethanolamine, sphingoglycolipid, as well as unidentified lipids, phospholipids and glycolipids. The results of the conducted polyphasic approach confirmed that this isolate represents a novel species of the genus Sphingomonas, for which the name Sphingomonas jeddahensis sp. nov. is proposed. The type strain of this species is G39T (=DSM 103790T=LMG 29955T).

Streptomyces jeddahensis sp. nov., an oleaginous bacterium isolated from desert soil.

A novel strain, G25T, was isolated from desert soil collected near Jeddah in Saudi Arabia. The strain could accumulate nearly 65 % of its cell dry weight as fatty acids, grow on a broad range of carbon sources and tolerate temperatures of up to 50 °C. With respect to to its 16S rRNA gene sequence, G25T is most closely related to Streptomyces massasporeus DSM 40035T, Streptomyces hawaiiensis DSM 40042T, Streptomyces indiaensis DSM 43803T, Streptomyces luteogriseus DSM 40483T and Streptomyces purpurascens DSM 40310T. Conventional DNA-DNA hybridization (DDH) values ranged from 18.7 to 46.9 % when G25T was compared with these reference strains. Furthermore, digital DDH values between the draft genome sequence of G25T and the genome sequences of other species of the genus Streptomyces were also significantly below the threshold of 70 %. The DNA G+C content of the draft genome sequence, consisting of 8.46 Mbp, was 70.3 %. The prevalent cellular fatty acids of G25T comprised anteiso-C15 : 0, iso-C15 : 0, C16 : 0 and iso-C16 : 0. The predominant menaquinones were MK-9(H6), MK-9(H8) and MK-9(H4). The polar lipids profile contained diphosphatidylglycerol, phosphatidylethanolamine, phosphatidylinositol, phosphatidylglycerol and phosphatidylinositol mannosides as well as unidentified phospholipids and phosphoaminolipids. The cell wall contained ll-diaminopimelic acid. Whole-cell sugars were predominantly glucose with small traces of ribose and mannose. The results of the polyphasic approach confirmed that this isolate represents a novel species of the genus Streptomyces, for which the name Streptomyces jeddahensis sp. nov. is proposed. The type strain of this species is G25T (=DSM 101878T =LMG 29545T =NCCB 100603T).

Conversion of cysteine to 3-mercaptopyruvic acid by bacterial aminotransferases.

3-Mercaptopyruvate (3MPy), a structural analog of 3-mercaptopropionic acid, is a precursor compound for biosynthesis of polythioesters in bacteria. The cost-effectiveness and sustainability of the whole process could be greatly improved by using the cysteine degradation pathway for an intracellular supply of 3MPy. Transamination of cysteine to its corresponding α-keto acid 3MPy is catalyzed by cysteine aminotransferases (CAT). However, CAT activity has so far not been described for bacterial aminotransferases (AT), and it was unknown whether they can be applied for the conversion of cysteine to 3MPy. In this study, we selected eight bacterial aminotransferases based on sequence homology to CAT of Rattus norvegicus (Got1). The aminotransferases included four aspartate aminotransferases (AATs) and four aromatic amino acid aminotransferases (ArATs) from Advenella mimigardefordensis DPN7, Escherichia coli MG1655, Shimwellia blattae ATCC 33430, Ralstonia eutropha H16 and Paracoccus denitrificans PD1222. For a more detailed characterization, all selected AAT or ArAT encoding genes were heterologously expressed in E. coli and purified. CAT activity was detected for all aminotransferases when a novel continuous coupled enzyme assay was applied. Kinetic studies revealed the highest catalytic efficiency of 5.1mM/s for AAT from A. mimigardefordensis. Formation of 3MPy from cysteine could additionally be verified by an optimized approach using derivatization of 3MPy with the Girard T reagent and liquid chromatography-mass spectrometry analyses.

Synthesis Gas (Syngas)-Derived Medium-Chain-Length Polyhydroxyalkanoate Synthesis in Engineered Rhodospirillum rubrum.

The purple nonsulfur alphaproteobacterium Rhodospirillum rubrum S1 was genetically engineered to synthesize a heteropolymer of mainly 3-hydroxydecanoic acid and 3-hydroxyoctanoic acid [P(3HD-co-3HO)] from CO- and CO2-containing artificial synthesis gas (syngas). For this, genes from Pseudomonas putida KT2440 coding for a 3-hydroxyacyl acyl carrier protein (ACP) thioesterase (phaG), a medium-chain-length (MCL) fatty acid coenzyme A (CoA) ligase (PP_0763), and an MCL polyhydroxyalkanoate (PHA) synthase (phaC1) were cloned and expressed under the control of the CO-inducible promoter PcooF from R. rubrum S1 in a PHA-negative mutant of R. rubrum P(3HD-co-3HO) was accumulated to up to 7.1% (wt/wt) of the cell dry weight by a recombinant mutant strain utilizing exclusively the provided gaseous feedstock syngas. In addition to an increased synthesis of these medium-chain-length PHAs (PHAMCL), enhanced gene expression through the PcooF promoter also led to an increased molar fraction of 3HO in the synthesized copolymer compared with the Plac promoter, which regulated expression on the original vector. The recombinant strains were able to partially degrade the polymer, and the deletion of phaZ2, which codes for a PHA depolymerase most likely involved in intracellular PHA degradation, did not reduce mobilization of the accumulated polymer significantly. However, an amino acid exchange in the active site of PhaZ2 led to a slight increase in PHAMCL accumulation. The accumulated polymer was isolated; it exhibited a molecular mass of 124.3 kDa and a melting point of 49.6°C. With the metabolically engineered strains presented in this proof-of-principle study, we demonstrated the synthesis of elastomeric second-generation biopolymers from renewable feedstocks not competing with human nutrition. IMPORTANCE: Polyhydroxyalkanoates (PHAs) are natural biodegradable polymers (biopolymers) showing properties similar to those of commonly produced petroleum-based nondegradable polymers. The utilization of cheap substrates for the microbial production of PHAs is crucial to lower production costs. Feedstock not competing with human nutrition is highly favorable. Syngas, a mixture of carbon monoxide, carbon dioxide, and hydrogen, can be obtained by pyrolysis of organic waste and can be utilized for PHA synthesis by several kinds of bacteria. Up to now, the biosynthesis of PHAs from syngas has been limited to short-chain-length PHAs, which results in a stiff and brittle material. In this study, the syngas-utilizing bacterium Rhodospirillum rubrum was genetically modified to synthesize a polymer which consisted of medium-chain-length constituents, resulting in a rubber-like material. This study reports the establishment of a microbial synthesis of these so-called medium-chain-length PHAs from syngas and therefore potentially extends the applications of syngas-derived PHAs.

Substrate and Cofactor Range Differences of Two Cysteine Dioxygenases from Ralstonia eutropha H16.

Cysteine dioxygenases (Cdos), which catalyze the sulfoxidation of cysteine to cysteine sulfinic acid (CSA), have been extensively studied in eukaryotes because of their roles in several diseases. In contrast, only a few prokaryotic enzymes of this type have been investigated. In Ralstonia eutropha H16, two Cdo homologues (CdoA and CdoB) have been identified previously. In vivo studies showed that Escherichia coli cells expressing CdoA could convert 3-mercaptopropionate (3MP) to 3-sulfinopropionate (3SP), whereas no 3SP could be detected in cells expressing CdoB. The objective of this study was to confirm these findings and to study both enzymes in detail by performing an in vitro characterization. The proteins were heterologously expressed and purified to apparent homogeneity by immobilized metal chelate affinity chromatography (IMAC). Subsequent analysis of the enzyme activities revealed striking differences with regard to their substrate ranges and their specificities for the transition metal cofactor, e.g., CdoA catalyzed the sulfoxidation of 3MP to a 3-fold-greater extent than the sulfoxidation of cysteine, whereas CdoB converted only cysteine. Moreover, the dependency of the activities of the Cdos from R. eutropha H16 on the metal cofactor in the active center could be demonstrated. The importance of CdoA for the metabolism of the sulfur compounds 3,3'-thiodipropionic acid (TDP) and 3,3'-dithiodipropionic acid (DTDP) by further converting their degradation product, 3MP, was confirmed. Since 3MP can also function as a precursor for polythioester (PTE) synthesis in R. eutropha H16, deletion of cdoA might enable increased synthesis of PTEs.

Strain and process development for poly(3HB-co-3HP) fermentation by engineered Shimwellia blattae from glycerol.

Poly(3-hydroxybytyrate-co-3-hydroxypropionate), poly(3HB-co-3HP), is a possible alternative to synthetic polymers such as polypropylene, polystyrene and polyethylene due to its low crystallinity and fragility. We already reported that recombinant strains of Shimwellia blattae expressing 1,3-propanediol dehydrogenase DhaT as well as aldehyde dehydrogenase AldD of Pseudomonas putida KT2442, propionate-CoA transferase Pct of Clostridium propionicum X2 and PHA synthase PhaC1 of Ralstonia eutropha H16 are able to accumulate up to 14.5% (wtPHA/wtCDW) of poly(3-hydroxypropionate), poly(3HP), homopolymer from glycerol as a sole carbon source (Appl Microbiol Biotechnol 98:7409-7422, 2014a). However, the cell density was rather low. In this study, we optimized the medium aiming at a more efficient PHA synthesis, and we engineered a S. blattae strain accumulating poly(3HB-co-3HP) with varying contents of the constituent 3-hydroxypropionate (3HP) depending on the cultivation conditions. Consequently, 7.12, 0.77 and 0.32 gPHA/L of poly(3HB-co-3HP) containing 2.1, 8.3 and 18.1 mol% 3HP under anaerobic/aerobic (the first 24 hours under anaerobic condition, thereafter, aerobic condition), low aeration/agitation (the minimum stirring rate required in medium mixing and small amount of aeration) and anaerobic conditions (the minimum stirring rate required in medium mixing without aeration), respectively, were synthesized from glycerol by the genetically modified S. blattae ATCC33430 strains in optimized culture medium.

Mercaptosuccinate dioxygenase, a cysteine dioxygenase homologue, from Variovorax paradoxus strain B4 is the key enzyme of mercaptosuccinate degradation.

The versatile thiol mercaptosuccinate has a wide range of applications, e.g. in quantum dot research or in bioimaging. Its metabolism is investigated in Variovorax paradoxus strain B4, which can utilize this compound as the sole source of carbon and sulfur. Proteomic studies of strain B4 resulted in the identification of a putative mercaptosuccinate dioxygenase, a cysteine dioxygenase homologue, possibly representing the key enzyme in the degradation of mercaptosuccinate. Therefore, the putative mercaptosuccinate dioxygenase was heterologously expressed, purified, and characterized in this study. The results clearly demonstrated that the enzyme utilizes mercaptosuccinate with concomitant consumption of oxygen. Thus, the enzyme is designated as mercaptosuccinate dioxygenase. Succinate and sulfite were verified as the final reaction products. The enzyme showed an apparent Km of 0.4 mM, and a specific activity (Vmax) of 20.0 µmol min(-1) mg(-1) corresponding to a kcat of 7.7 s(-1). Furthermore, the enzyme was highly specific for mercaptosuccinate, no activity was observed with cysteine, dithiothreitol, 2-mercaptoethanol, and 3-mercaptopropionate. These structurally related thiols did not have an inhibitory effect either. Fe(II) could clearly be identified as metal cofactor of the mercaptosuccinate dioxygenase with a content of 0.6 mol of Fe(II)/mol of enzyme. The recently proposed hypothesis for the degradation pathway of mercaptosuccinate based on proteome analyses could be strengthened in the present study. (i) Mercaptosuccinate is first converted to sulfinosuccinate by this mercaptosuccinate dioxygenase; (ii) sulfinosuccinate is spontaneously desulfinated to succinate and sulfite; and (iii) whereas succinate enters the central metabolism, sulfite is detoxified by the previously identified putative molybdopterin oxidoreductase.

Mercaptosuccinate metabolism in Variovorax paradoxus strain B4--a proteomic approach.

Variovorax paradoxus B4 was isolated due to its ability to degrade the organic thiol compound mercaptosuccinate, which could be a promising precursor for novel polythioesters. The analysis of the proteome of this Gram-negative bacterium revealed several proteins with significantly increased expression during growth of cells with mercaptosuccinate as carbon source when compared to cells grown with gluconate or succinate. Among those, a large number of proteins involved in amino acid metabolism were identified, e.g., adenosylhomocysteinase and glutamate-ammonia ligase. Additionally, detection of superoxide dismutase strengthened the assumption of enhanced stress levels in mercaptosuccinate-grown cells. Several isoforms of a rhodanese domain-containing protein exhibited particularly increased expression during growth with mercaptosuccinate in comparison to gluconate (factor 14.2, stationary phase) or to succinate (factor 15.4, stationary phase). Besides this, augmented expression of the hypothetical protein VAPA_1c41240 raised attention. VAPA_1c41240 exhibited up to 13.3-fold (mercaptosuccinate vs gluconate) or 9.5-fold (mercaptosuccinate vs succinate) increased expression levels, and in silico searches revealed that this protein might be a thiol dioxygenase. Based on these results, a novel degradation pathway is proposed for mercaptosuccinate. The newly identified putative mercaptosuccinate dioxygenase could convert mercaptosuccinate to sulfinosuccinate by the introduction of two molecules of oxygen. Subsequently, sulfinosuccinate would be cleaved into succinate and sulfite either by a yet unknown enzyme, by spontaneous hydrolysis, or by the putative mercaptosuccinate dioxygenase itself. Succinate could then enter the central metabolism, while detoxification of sulfite could be achieved by the previously identified putative molybdopterin oxidoreductase. Biochemical studies will be done in the future to confirm this pathway.

Guanidination of soluble lysine-rich cyanophycin yields a homoarginine-containing polyamide.

Soluble cyanobacterial granule polypeptide (CGP), especially that isolated from recombinant Escherichia coli strains, consists of aspartic acid, arginine, and a greater amount of lysine than that in insoluble CGP isolated from cyanobacteria or various other recombinant bacteria. In vitro guanidination of lysine side chains of soluble CGP with o-methylisourea (OMIU) yielded the nonproteinogenic amino acid homoarginine. The modified soluble CGP consisted of 51 mol% aspartate, 14 mol% arginine, and 35 mol% homoarginine. The complete conversion of lysine residues to homoarginine was confirmed by (i) nuclear magnetic resonance spectrometry, (ii) coupled liquid chromatography-mass spectrometry, and (iii) high-performance liquid chromatography. Unlike soluble CGP, this new homoarginine-containing polyamide was soluble only under acidic or alkaline conditions and was insoluble in water or at a neutral pH. Thus, it showed solubility behavior similar to that of the natural insoluble polymer isolated from cyanobacteria, consisting of aspartic acid and arginine only. Polyacrylamide gel electrophoresis revealed similar degrees of polymerization of the native (12- to 40-kDa) and modified (10- to 35-kDa) polymers. This study showed that the chemical structure and properties of a biopolymer could be changed by in vitro introduction of a new functional group after biosynthesis of the native polymer. In addition, the modified CGP could be digested in vitro using the cyanophycinase from Pseudomonas alcaligenes strain DIP1, yielding a new dipeptide consisting of aspartate and homoarginine.

Functional diversity of Nocardia in metabolism.

Bacteria affiliated in the genus Nocardia are aerobic and Gram-positive actinomycetes that are widely found in aquatic and terrestrial habitats. As occasional pathogens, several of them cause infection diseases called 'nocardiosis' affecting lungs, central nervous system, cutaneous tissues and others. In addition, members of the genus Nocardia exhibit an enormous metabolic versatility. On one side, many secondary metabolites have been isolated from members of this genus that exhibit various biological activities such as antimicrobial, antitumor, antioxidative and immunosuppressive activities. On the other side, many species are capable of degrading or converting aliphatic and aromatic toxic hydrocarbons, natural or synthetic polymers, and other widespread environmental pollutants. Because of these valuable properties and the application potential, Nocardia species have attracted much interest in academia and industry in recent years. A solid basis of genetic tools including a set of shuttle vectors and an efficient electroporation method for further genetic and metabolic engineering studies has been established to conduct efficient research. Associated with the increasing data of nocardial genome sequences, the functional diversity of Nocardia will be much faster and better understood.

Increased lysine content is the main characteristic of the soluble form of the polyamide cyanophycin synthesized by recombinant Escherichia coli.

Cyanophycin, a polyamide of cyanobacterial or noncyanobacterial origin consisting of aspartate, arginine, and lysine, was synthesized in different recombinant strains of Escherichia coli expressing cphA from Synechocystis sp. strain PCC 6308 or PCC 6803, Anabaena sp. strain PCC 7120, or Acinetobacter calcoaceticus ADP1. The molar aspartate/arginine/lysine ratio of the water-soluble form isolated from a recombinant strain expressing CphA6308 was 1:0.5:0.5, with a lysine content higher than any ever described before. The water-insoluble form consisted instead of mainly aspartate and arginine residues and had a lower proportion of lysine, amounting to a maximum of only 5 mol%. It could be confirmed that the synthesis of soluble cyanobacterial granule polypeptide (CGP) is independent of the origin of cphA. Soluble CGP isolated from all recombinant strains contained a least 17 mol% lysine. The total CGP portion of cell dry matter synthesized by CphA6308 from recombinant E. coli was about 30% (wt/wt), including 23% (wt/wt) soluble CGP, by using terrific broth complex medium for cultivation at 30°C for 72 h. Enhanced production of soluble CGP instead of its insoluble form is interesting for further application and makes recombinant E. coli more attractive as a suitable source for the production of polyaspartic acid or dipeptides. In addition, a new low-cost, time-saving, effective, and common isolation procedure for mainly soluble CGP, suitable for large-scale application, was established in this study.