Microfluidics-assisted fabrication of natural killer cell-laden microgel enhances the therapeutic efficacy for tumor immunotherapy.

Recently, interest in cancer immunotherapy has increased over traditional anti-cancer therapies such as chemotherapy or targeted therapy. Natural killer (NK) cells are part of the immune cell family and essential to tumor immunotherapy as they detect and kill cancer cells. However, the disadvantage of NK cells is that cell culture is difficult. In this study, porous microgels have been fabricated using microfluidic channels to effectively culture NK cells. Microgel fabrication using microfluidics can be mass-produced in a short time and can be made in a uniform size. Microgels consist of photo cross-linkable polymers such as methacrylic gelatin (GelMa) and can be regulated via controlled GelMa concentrations. NK92 cell-laden three-dimensional (3D) microgels increase mRNA expression levels, NK92 cell proliferation, cytokine release, and anti-tumor efficacy, compared with two-dimensional (2D) cultures. In addition, the study confirms that 3D-cultured NK92 cells enhance anti-tumor effects compared with enhancement by 2D-cultured NK92 cells in the K562 leukemia mouse model. Microgels containing healthy NK cells are designed to completely degrade after 5 days allowing NK cells to be released to achieve cell-to-cell interaction with cancer cells. Overall, this microgel system provides a new cell culture platform for the effective culturing of NK cells and a new strategy for developing immune cell therapy.

3D-printed versatile biliary stents with nanoengineered surface for anti-hyperplasia and antibiofilm formation.

Biliary strictures are characterized by the narrowing of the bile duct lumen, usually caused by surgical biliary injury, cancer, inflammation, and scarring from gallstones. Endoscopic stent placement is a well-established method for the management of biliary strictures. However, maintaining optimal mechanical properties of stents and designing surfaces that can prevent stent-induced tissue hyperplasia and biofilm formation are challenges in the fabrication of biodegradable biliary stents (BBSs) for customized treatment. This study proposes a novel approach to fabricating functionalized polymer BBSs with nanoengineered surfaces using 3D printing. The 3D printed stents, fabricated from bioactive silica poly(ε-carprolactone) (PCL) via a sol-gel method, exhibited tunable mechanical properties suitable for supporting the bile duct while ensuring biocompatibility. Furthermore, a nanoengineered surface layer was successfully created on a sirolimus (SRL)-coated functionalized PCL (fPCL) stent using Zn ion sputtering-based plasma immersion ion implantation (S-PIII) treatment to enhance the performance of the stent. The nanoengineered surface of the SRL-coated fPCL stent effectively reduced bacterial responses and remarkably inhibited fibroblast proliferation and initial burst release of SRL in vitro systems. The physicochemical properties and biological behaviors, including in vitro biocompatibility and in vivo therapeutic efficacy in the rabbit bile duct, of the Zn-SRL@fPCL stent demonstrated its potential as a versatile platform for clinical applications in bile duct tissue engineering.

Longitudinal long term follow up investigation on the carcinogenic impact of polyhexamethylene guanidine phosphate in rat models.

Polyhexamethylene guanidine phosphate (PHMG-p) is a major component in humidifier disinfectants, which cause life-threatening lung injuries. However, to our knowledge, no published studies have investigated associations between PHMG-p dose and lung damage severity with long-term follow-up. Therefore, we evaluated longitudinal dose-dependent changes in lung injuries using repeated chest computed tomography (CT). Rats were exposed to low (0.2 mg/kg, n = 10), intermediate (1.0 mg/kg, n = 10), and high (5.0 mg/kg, n = 10) doses of PHMG-p. All rats underwent repeated CT scans after 10 and 40 weeks following the first exposure. All CT images were quantitatively analyzed using commercial software. Inflammation/fibrosis and tumor counts underwent histopathological evaluation. In both radiological and histopathologic results, the lung damage severity increased as the PHMG-p dose increased. Moreover, the number, size, and malignancy of the lung tumors increased as the dose increased. Bronchiolar-alveolar hyperplasia developed in all groups. During follow-up, there was intergroup variation in bronchiolar-alveolar hyperplasia progression, although bronchiolar-alveolar adenomas or carcinomas usually increase in size over time. Thirty-three carcinomas were detected in the high-dose group in two rats. Overall, lung damage from PHMG-p and the number and malignancy of lung tumors were shown to be dose-dependent in a rat model using repeated chest CT scans during a long-term follow-up.

Hyaluronic acid/polyphenol sunscreens with broad-spectrum UV protection properties from tannic acid and quercetin.

Currently, commercial sunscreens cause a number of biotoxicity and environmental issues, making it imperative to develop biocompatible alternatives. In this study, we aimed to develop an alternative sunscreen from two ecofriendly and biocompatible natural polyphenolic compounds, tannic acid (TA) and quercetin (Que). The sunscreen was prepared through a simple process using an oil-in-water emulsion as the medium and hyaluronic acid (HA) as the base polymer to improve biocompatibility. The HA/TA/Que. sunscreen prepared in this study exhibits 0 % transmittance in the UVB region and <15 % transmittance in the UVA region, resulting in excellent sun-protection properties (SPF 30). Remarkably, the as-prepared HA/TA/Que. sunscreen has a suitable viscosity and similar UV protection properties to those of commercial sunscreens. The HA/TA/Que. sunscreen also exhibits 90.4 % antioxidant activity against 2,2-diphenyl-1-picrylhydrazyl, demonstrating an ability to effectively capture reactive oxygen species that directly affect the skin. In addition, the cell viability was >90 % at a concentration of 50 µg/mL after 7 days, indicating excellent cytocompatibility. Owing to its various advantageous features, the HA/TA/Que. sunscreen with excellent sun protection properties and multiple functionalities is expected to resolve many environmental and biological issues caused by commercial sunscreens.

Artificial Intelligence in Breast Cancer Diagnosis and Personalized Medicine.

Breast cancer is a significant cause of cancer-related mortality in women worldwide. Early and precise diagnosis is crucial, and clinical outcomes can be markedly enhanced. The rise of artificial intelligence (AI) has ushered in a new era, notably in image analysis, paving the way for major advancements in breast cancer diagnosis and individualized treatment regimens. In the diagnostic workflow for patients with breast cancer, the role of AI encompasses screening, diagnosis, staging, biomarker evaluation, prognostication, and therapeutic response prediction. Although its potential is immense, its complete integration into clinical practice is challenging. Particularly, these challenges include the imperatives for extensive clinical validation, model generalizability, navigating the "black-box" conundrum, and pragmatic considerations of embedding AI into everyday clinical environments. In this review, we comprehensively explored the diverse applications of AI in breast cancer care, underlining its transformative promise and existing impediments. In radiology, we specifically address AI in mammography, tomosynthesis, risk prediction models, and supplementary imaging methods, including magnetic resonance imaging and ultrasound. In pathology, our focus is on AI applications for pathologic diagnosis, evaluation of biomarkers, and predictions related to genetic alterations, treatment response, and prognosis in the context of breast cancer diagnosis and treatment. Our discussion underscores the transformative potential of AI in breast cancer management and emphasizes the importance of focused research to realize the full spectrum of benefits of AI in patient care.

Peptide derived from stromal cell-derived factor 1δ enhances the in vitro expression of osteogenic proteins via bone marrow stromal cell differentiation and promotes bone formation in in vivo models.

Mesenchymal stem cells (MSCs) rely on chemokines and chemokine receptors to execute their biological and physiological functions. Stromal cell-derived factor-1 (SDF-1) is upregulated in injury sites, where it acts as a chemotactic agent, attracting CXCR4-expressing MSCs, which play a pivotal role in the healing and regeneration of tissue throughout the body. Furthermore, SDF-1 expression has been observed in regions experiencing inflammation-induced bone destruction and fracture sites. In this study, we identified a novel peptide called bone-forming peptide-5 (BFP-5), derived from SDF-1δ, which can promote the osteogenesis of MSCs as well as bone formation and healing. Multipotent bone marrow stromal cells treated with BFP-5 showed enhanced alizarin red S staining and higher alkaline phosphatase (ALP) activity. Moreover, ALP and osterix proteins were more abundantly expressed when cells were treated with BFP-5 than SDF-1α. Histology and microcomputed tomography data at 12 weeks demonstrated that both rabbit and goat models transplanted with polycaprolactone (PCL) scaffolds coated with BFP-5 showed significantly greater bone formation than animals transplanted with PCL scaffolds alone. These findings suggest that BFP-5 could be useful in the development of related therapies for conditions associated with bones.

A wearable colorimetric sweat pH sensor-based smart textile for health state diagnosis.

Sweat pH is an important indicator for diagnosing disease states, such as cystic fibrosis. However, conventional pH sensors are composed of large brittle mechanical parts and need additional instruments to read signals. These pH sensors have limitations for practical wearable applications. In this study, we propose wearable colorimetric sweat pH sensors based on curcumin and thermoplastic-polyurethane (C-TPU) electrospun-fibers to diagnose disease states by sweat pH monitoring. This sensor aids in pH monitoring by changing color in response to chemical structure variation from enol to di-keto form via H-atom separation. Its chemical structure variation changes the visible color due to light absorbance and reflectance changes. Furthermore, it can rapidly and sensitively detect sweat pH due to its superior permeability and wettability. By O2 plasma activation and thermal pressing, this colorimetric pH sensor can be easily attached to various fabric substrates such as swaddling and patient clothing via surface modification and mechanical interlocking of C-TPU. Furthermore, the diagnosable clothing is durable and reusable enough to neutral washing conditions due to the reversible pH colorimetric sensing performance by restoring the enol form of curcumin. This study contributes to the development of smart diagnostic clothing for cystic fibrosis patients who require continuous sweat pH monitoring.

NK cells encapsulated in micro/macropore-forming hydrogels via 3D bioprinting for tumor immunotherapy.

BACKGROUND: Patients face a serious threat if a solid tumor leaves behind partial residuals or cannot be completely removed after surgical resection. Immunotherapy has attracted attention as a method to prevent this condition. However, the conventional immunotherapy method targeting solid tumors, that is, intravenous injection, has limitations in homing in on the tumor and in vivo expansion and has not shown effective clinical results. METHOD: To overcome these limitations, NK cells (Natural killer cells) were encapsulated in micro/macropore-forming hydrogels using 3D bioprinting to target solid tumors. Sodium alginate and gelatin were used to prepare micro-macroporous hydrogels. The gelatin contained in the alginate hydrogel was removed because of the thermal sensitivity of the gelatin, which can generate interconnected micropores where the gelatin was released. Therefore, macropores can be formed through bioprinting and micropores can be formed using thermally sensitive gelatin to make macroporous hydrogels. RESULTS: It was confirmed that intentionally formed micropores could help NK cells to aggregate easily, which enhances cell viability, lysis activity, and cytokine release. Macropores can be formed using 3D bioprinting, which enables NK cells to receive the essential elements. We also characterized the functionality of NK 92 and zEGFR-CAR-NK cells in the pore-forming hydrogel. The antitumor effects on leukemia and solid tumors were investigated using an in vitro model. CONCLUSION: We demonstrated that the hydrogel encapsulating NK cells created an appropriate micro-macro environment for clinical applications of NK cell therapy for both leukemia and solid tumors via 3D bioprinting. 3D bioprinting makes macro-scale clinical applications possible, and the automatic process shows potential for development as an off-the-shelf immunotherapy product. This immunotherapy system could provide a clinical option for preventing tumor relapse and metastasis after tumor resection. Micro/macropore-forming hydrogel with NK cells fabricated by 3D bioprinting and implanted into the tumor site.

Assessment of Esophageal Reconstruction via Bioreactor Cultivation of a Synthetic Scaffold in a Canine Model.

OBJECTIVES: Using tissue-engineered materials for esophageal reconstruction is a technically challenging task in animals that requires bioreactor training to enhance cellular reactivity. There have been many attempts at esophageal tissue engineering, but the success rate has been limited due to difficulty in initial epithelialization in the special environment of peristalsis. The purpose of this study was to evaluate the potential of an artificial esophagus that can enhance the regeneration of esophageal mucosa and muscle through the optimal combination of a double-layered polymeric scaffold and a custom-designed mesenchymal stem cell-based bioreactor system in a canine model. METHODS: We fabricated a novel double-layered scaffold as a tissue-engineered esophagus using an electrospinning technique. Prior to transplantation, human-derived mesenchymal stem cells were seeded into the lumen of the scaffold, and bioreactor cultivation was performed to enhance cellular reactivity. After 3 days of cultivation using the bioreactor system, tissue-engineered artificial esophagus was transplanted into a partial esophageal defect (5×3 cm-long resection) in a canine model. RESULTS: Scanning electron microscopy (SEM) showed that the electrospun fibers in a tubular scaffold were randomly and circumferentially located toward the inner and outer surfaces. Complete recovery of the esophageal mucosa was confirmed by endoscopic analysis and SEM. Esophagogastroduodenoscopy and computed tomography also showed that there were no signs of leakage or stricture and that there was a normal lumen with complete epithelialization. Significant regeneration of the mucosal layer was observed by keratin-5 immunostaining. Alpha-smooth muscle actin immunostaining showed significantly greater esophageal muscle regeneration at 12 months than at 6 months. CONCLUSION: Custom-designed bioreactor cultured electrospun polyurethane scaffolds can be a promising approach for esophageal tissue engineering.

Clinical significance of extrathyroidal extension to major vessels in papillary thyroid carcinoma.

PURPOSE: Gross extrathyroidal extension (gETE) into major vessel is considered the most advanced stage of the locally advanced papillary thyroid cancer (PTC). Surgical intervention may not benefit some patients at this disease stage or even result in intraoperative death due to massive hemorrhage; however, it is still considered an effective strategy for most cases. The lack of description for this challenging invasion in PTC warrants detailed characterization of its pattern, risk factors, optimal surgical method, and prognostic value. METHODS: In total, 3127 patients diagnosed as having PTC were enrolled and categorized into two the following groups, namely the major vessel invasion (MVI) group (n = 30) and the control group (n = 3097). Data regarding clinicopathological and demographic characteristics, vascular invasion sites, postoperative complications, locoregional recurrence, distant metastasis, and surgical strategies were collected. Predictive disease-free survival (DFS) was also compared between the two groups. RESULTS: MVI was independently associated with invasion of the esophageal extension, age < 55 years, tumor size > 1 cm, lateral lymph node metastasis, and distant metastasis (P = 0.00; P = 0.01; 0.05; P = 0.00; P = 0.00, respectively). The difference in the predictive DFS between the two groups was significant (P = 0.00), and the difference remained significant even in patients with ETE when compared with patients without ETE (P = 0.00). Additionally, predictive DFS did not differ significantly between patients who received vessel repairment and those who received vessel resection (P = 0.28). CONCLUSIONS: This study first characterized the gross MVI pattern exhibited by PTC and the risk factors for MVI. Additionally, it demonstrated the DFS of patients with PTC. Extensive gross MVI significantly worsened the biological characteristics of PTC. Regardless of the high risk and difficulty of the operation, patients still benefited from the surgical intervention, and vessel repairment may be the optimal surgical strategy.

[Enterostomy based on abdominal wall tension and fascial locking: a theory of preventing stoma complications and parahernia].

No consensus on standardized technique of enterostomy creation has been made meanwhile high heterogeneity of surgical procedure exists in 'stoma creation' chapters of textbooks or atlases of colorectal surgery. The present article reviews the anatomy of tendinous aponeurotic fibers which is crucial for abdominal wall tension and integrity. Through empirical practice we hypothesize a procedure of enterostomy creation basied on abdominal wall tension plus anchor suture for fascia fixation which could theoretically decrease short-term stoma complication rates and long-term parastomal hernia rates. Surgical techniques are as followed: (1) preoperative stoma site mark for de-functioning ileostomy should be positioned at the lateral border of rectus abdominis muscle (RAM) to decrease the difficulty of stoma reversal and for permanent colostomy should be placed overlying the RAM to promote adhesion; (2)Optimal circular removal or lineal opening of skin, and avoid dissection of subcutaneous tissue; (3) Lineal dissection of natural strong fascia (rectus sheath) at stoma site and blunt separation of muscular fibers. The tunnel of the fascia should be made with appropriate size without undue tension. To prevent the formation of dead space, additional suturing at fascia layer is unnecessary. (4) Anchor suture for fascia fixation at two ends of fascia opening could be considered to avoid delayed fascia disruption and parastomal hernia. (5) After pull-through of ileum or colon loop, 4-8 interrupted seromuscular sutures could be placed to attach loop to skin. For ileostomy, self-eversion of mucosa can be successful in vast majority of cases and a Brooke ileostomy is not necessary. The efficacy and safety of this procedure should be tested in future trials.

Three-dimensional bioprinting of mesenchymal stem cells using an osteoinductive bioink containing alginate and BMP-2-loaded PLGA nanoparticles for bone tissue engineering.

Hydrogels mimicking the physicochemical properties of the native extracellular matrix have attracted great attention as bioinks for three-dimensional (3D) bioprinting in tissue engineering applications. Alginate is a widely used bioink with beneficial properties of fast gelation and biocompatibility; however, bioprinting using alginate-based bioinks has several limitations, such as poor printability, structural instability, and limited biological activities. To address these issues, we formulated various bioinks using bone morphogenetic protein-2 (BMP-2)-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles and alginate for mesenchymal stem cell (MSC) printing and induction of osteogenic differentiation. Incorporation of PLGA nanoparticles into alginate could enhance the mechanical properties and printability of the bioink. In particular, Alg/NPN30 (30 mg/mL PLGA nanoparticles and 3% w/v alginate) was most suitable for 3D printing with respect to printability and stability. BMP-2-loaded PLGA nanoparticles (NPBMP-2) displayed sustained in vitro release of BMP-2 for up to two weeks. Further in vitro studies indicated that bioinks composed of alginate and NPBMP-2 significantly induced osteogenesis of the MSCs compared with other controls, evidenced by enhanced calcium deposition, alkaline phosphatase activity, and gene expression of osteogenic markers. Our novel bioink consisting of widely used biocompatible components displays good printability, stability, and osteogenic inductivity, and holds strong potential for cell printing and bone tissue engineering applications.

Evaluation of the inflammatory profile following uncomplicated elective colectomy.

BACKGROUND: Attenuation of the inflammatory response in patients undergoing colectomy with modern perioperative care and laparoscopic surgery has been a focus of research in recent years. Despite reported benefits, significant heterogeneity remains with studies including patients undergoing both rectal and colon surgery and including surgery with postoperative complications. Therefore, the aim of the study was to evaluate the inflammatory response in patients undergoing elective colectomy without complications, specifically comparing open and laparoscopic approaches. METHODS: A multicenter prospective study was conducted across four public hospitals in Auckland and Christchurch, New Zealand. Consecutive adults undergoing elective colectomy were included over a 3-year period. Perioperative blood samples were collected and analysed for the following inflammatory markers: IL-6, IL-1ß, TNFα, IL-10, CRP, leucocyte and neutrophil count. Statistical analysis was performed using SPSS statistical software. RESULTS: A total of 168 colectomy patients without complications were included in the analysis. Patients that underwent laparoscopy had significantly reduced IL-6, neutrophils and CRP on postoperative day (POD) 1 (p < 0.05) compared to an open approach. IL-10 and TNFα were significantly reduced on POD 2 (p < 0.05) in laparoscopic patients. Patients with a Body Mass Index (BMI) greater than 30 kg/m2 had significantly higher levels of CRP regardless of operative approach. Statins altered both preoperative and postoperative inflammatory markers. CONCLUSION: The postoperative inflammatory response is influenced by surgical approach, perioperative medications, and patient factors. These findings have important implications in the utility of biomarkers in the diagnosis of postoperative surgical complications, in particular in the early diagnosis of anastomotic leak.

Changing the routine: a move to patient initiated follow up to improve surgical outpatient clinic.

INTRODUCTION: Patient initiated follow up (PIFU) allows patients to initiate a hospital follow up appointment on an 'as required' basis in contrast to the traditional physician-initiated model. We present a clinical pathway for patients referred with rectal bleeding at a large tertiary public hospital in South Auckland, New Zealand and demonstrate the utility of PIFU and its impact on reducing follow up appointments. METHOD: The purpose of the pathway was to allow standardized care by the clinicians and allow for PIFU. Two separate protocols were developed - 'Painful PR bleeding' and 'Painless PR bleeding'. A new clinic (NC) was started following these protocols, and this was compared to historical controls (HC). The primary outcome was the rate of follow up appointments. RESULTS: There were 133 patients in the NC and 135 in the HC, with significantly less follow ups in the NC (6% versus 45%, p < 0.0001). A small percentage of patients in the NC group were directly discharged (10%) whilst 70% of patients were discharged with a PIFU card. Thirty phone calls were made using PIFU, with 10 patients returning to clinic and 20 requiring advice and reassurance only. At 5 year follow up, there was a single colorectal malignancy found in both groups. CONCLUSION: Initiating a protocol that includes patient initiated follow up vastly reduces the need for routine return to clinic for the majority of patients, without sacrificing patient care. A protocolised approach to clinic for other areas in general surgery should be considered.

Detection of Anastomotic Leakage Following Elective Colonic Surgery: Results of the Prospective Biomarkers and Anastomotic Leakage (BALL) Study.

BACKGROUND: Anastomotic leakage (AL) is an infrequent but life-threatening surgical complication following colorectal surgery. Early diagnosis remains clinically difficult but is a necessity to reduce associated morbidity and mortality. Clinical review and radiological modalities for the diagnosis of leakage remain non-specific and often only detect AL once it is well developed. Inflammatory biomarkers however have shown promise in early pre-clinical detection of leakage following colorectal surgery. METHODS: A multi-center, prospective observational study was conducted across four public hospitals in Auckland and Christchurch, New Zealand. Consecutive adults undergoing elective colectomy were initially recruited over a 3-y period. Perioperative blood samples were collected to measure interleukin (IL)-6, IL-1ß, tumor necrosis factor α, IL-10, C-reactive protein (CRP), leukocyte and neutrophil counts. Statistical analysis was performed to compare patients with an uncomplicated recovery with patients with AL. RESULTS: Sixteen patients developed AL (5.7%), diagnosed at a median post-operative (POD) day 7. CRP and IL-6 were consistently elevated in the early post-operative period in patients with AL, and had the best diagnostic accuracy on POD 3 (area under the curve 0.70; P = 0.02) and POD 1 (area under the curve 0.69; P = 0.02), respectively. IL-10, once adjusted for body mass index and surgical approach, was the sole biomarker significantly elevated in patients with AL on POD 4. CONCLUSIONS: Early post-operative elevations of CRP and IL-6 provide utility for early detection of AL after elective colectomy. Application of these inflammatory biomarkers and their combinations in daily practice warrants further investigation.

MiR-590 suppresses the progression of non-small cell lung cancer by regulating YAP1 and Wnt/ß-catenin signaling.

OBJECTIVE: Accumulating evidence has been revealed that miR-590 is involved in the progression and carcinogenesis of various cancers. However, the molecular mechanism of miR-590 in non-small-cell lung cancer (NSCLC) remains unclear. METHODS: Quantitative reverse transcription-PCR (qRT-PCR), western blot, MTT, and transwell assay were applied to investigate the functional role of miR-590 in this study. Dual luciferase reporter assay was utilized to investigate the interaction between YAP1 and miR-590 expression. Cells transfected with miR-590 mimic or inhibitor were subjected to western blot to investigate the role of Wnt/ß-catenin signaling in NSCLC modulated by miR-590. RESULTS: MiR-590 was down-regulated in NSCLC tissues and cells. Kaplan-Meier analysis found that the higher expression of miR-590 in NSCLC patients, the more improved survival rate of NSCLC patients. Over-expression of miR-590 inhibited NSCLC cell proliferation, migration, and invasion. Moreover, increasing miR-590 suppressed Yes-associated protein 1 (YAP1) expression and inhibited the Wnt/ß-catenin pathway in NSCLC cells. Furthermore, miR-590 was negatively correlated with YAP1 expression. CONCLUSION: These findings demonstrated that the miR-590/YAP1 axis exerted an important role in the progression of NSCLC, suggesting that miR-590 might be the appealing prognostic marker for NSCLC treatment.

Inflammatory Proteins in the Amniotic Fluid, Plasma, and Cervicovaginal Fluid for the Prediction of Intra-Amniotic Infection/Inflammation and Imminent Preterm Birth in Preterm Labor.

OBJECTIVE: This study was aimed to develop models using multiple cytokine/chemokine levels in cervicovaginal fluid (CVF) and plasma and widely used noninvasive parameters that have better accuracy for predicting intra-amniotic infection and/or inflammation (IAI) and imminent spontaneous preterm delivery (SPTD, ≤48 hours) in women with preterm labor (PTL). STUDY DESIGN: This was a retrospective cohort study of 95 singleton pregnant women with PTL (23-34 weeks) who underwent amniocentesis. Both CVF and plasma samples were obtained at the time of amniocentesis, and serum C-reactive protein (CRP) levels were measured. The amniotic fluid (AF), CVF, and plasma samples were assayed for interleukin (IL)-6, IL-8, IL-10, monocyte chemotactic protein-1 (MCP-1), and macrophage inflammatory protein-1ß (MIP-1ß) levels using a multiplex immunoassay kit. RESULTS: The levels of most cytokines/chemokines measured in the AF and CVF were significantly higher in the women with than in those without IAI and imminent SPTD, whereas only high-plasma IL-10 level showed a significant association with imminent SPTD. In predicting IAI, proteins in AF had significantly higher areas under the curves (AUCs) than those in CVF and plasma. However, for predicting imminent SPTD, no significant differences in the AUCs of the outcome-associated proteins were observed among the measurements in AF, CVF, and maternal plasma. By using stepwise regression analyses, noninvasive models (using protein levels in CVF and baseline clinical parameters) were developed for the prediction of IAI and imminent SPTD. The AUC of these noninvasive models were similar to those of the invasive models (using AF protein levels and baseline clinical parameters). CONCLUSION: Noninvasive models based on CVF cytokine/chemokine levels and widely used noninvasive parameters (especially CRP) act as good indicators for predicting the risk of IAI and imminent SPTD in women with PTL. Evaluation of cytokine/chemokine levels in plasma samples did not add valuable information regarding the two outcome measures in the PTL setting. KEY POINTS: · Markers in either CVF or plasma alone did not have sufficient accuracy for predicting IAI and SPTD.. · Noninvasive models using CVF cytokine and CRP act as effective tools for predicting two outcomes.. · Evaluation of cytokine level in plasma did not add valuable information regarding two outcomes..

Surface engineering of 3D-printed scaffolds with minerals and a pro-angiogenic factor for vascularized bone regeneration.

Scaffolds functionalized with biomolecules have been developed for bone regeneration but inducing the regeneration of complex structured bone with neovessels remains a challenge. For this study, we developed three-dimensional printed scaffolds with bioactive surfaces coated with minerals and platelet-derived growth factor. The minerals were homogeneously deposited on the surface of the scaffold using 0.01 M NaHCO3 with epigallocatechin gallate in simulated body fluid solution (M2). The M2 scaffold demonstrated enhanced mineral coating amount per scaffold with a greater compressive modulus than the others which used different concentration of NaHCO3. Then, we immobilized PDGF on the mineralized scaffold (M2/P), which enhanced the osteogenic differentiation of human adipose derived stem cells in vitro and promoted the secretion of pro-angiogenic factors. Cells cultured in M2/P showed remarkable ratio of osteocalcin- and osteopontin-positive nuclei, and M2/P-derived medium induced endothelial cells to form tubule structures. Finally, the implanted M2/P scaffolds onto mouse calvarial defects had regenerated bone in 80.8 ± 9.8% of the defect area with the arterioles were formed, after 8 weeks. In summary, our scaffold, which composed of minerals and pro-angiogenic growth factor, could be used therapeutically to improve the regeneration of bone with a highly vascularized structure. STATEMENT OF SIGNIFICANCE: Surface engineered scaffolds have been developed for bone regeneration but inducing the volumetric regeneration of bone with neovessels remains a challenge. In here, we developed 3D printed scaffolds with bioactive surfaces coated with bio-minerals and platelet-derived growth factors. We proved that the 0.01 M NaHCO3 with polyphenol in simulated body fluid solution enhanced the deposition of bio-minerals and even distribution on the surface of scaffold. The in vitro studies demonstrated that the attached cells on the bioactive surface showed the enhanced osteogenic differentiation and secretion of pro-angiogenic factors. Finally, the scaffold with bioactive surface not only improved the regenerated volume of bone tissues but also increased neovessel formation after in vivo implantation onto mouse calvarial defect.

Long-term carbon black inhalation induced the inflammation and autophagy of cerebellum in rats.

Carbon black (CB) has been demonstrated to have adverse effects on the lung tissue. Few studies explored the effects of CB on the cerebellum, widely recognized to contribute to gait and balance coordination and timing in the motor domain. Some studies have reported that inflammatory response and damaged autophagy are important mechanisms of CB toxicity and can be repaired after the recovery. The present study aimed to determine whether long-term CB exposure could induce the inflammation and damaged autophagy of the cerebellum. The rats were randomly divided into four groups. The control group received the filtered air for 90 days; the carbon black (CB) group received CB particles for 90 days; the recovery (R) group received CB for 90 days and recovered for another 14 days; the recovery control (RC) group received filtered air for 104 days. The purpose of the R group was to test whether neuroinflammation and autophagy could be repaired after short-term recovery. The western blot and immunohistochemistry revealed that long-term CB exposure induced augmented level of pro-inflammatory cytokines (Interleukin-1ß, IL-1ß; Interleukin-6, IL-6; and Tumor Necrosis Factor-α, TNF-α) and anti-inflammatory cytokine (Interleukin-10, IL-10). The autophagic markers (Beclin1 and LC3) were increased in both CB group and R group. These findings clearly demonstrated that long-term CB exposure induced inflammation and autophagy in the cerebellum, which were not obviously improved after short-term recovery.

Absolute oral and subcutaneous bioavailability of ortho-topolin riboside in mice.

Among essential phytohormones playing a pivotal role in regulating growth and development, ortho-topolin riboside (oTR) exerts the most substantial anti-tumor potency in various cancer cell lines. This study was designed to establish a quantitative determination method for oTR in mouse plasma using high-performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS), to validate the analytical method including stability, and to characterise its pharmacokinetic behaviour in mice. After simple protein precipitation with acetonitrile including kinetin riboside (internal standard), oTR was eluted on a reversed-phase column using a mobile phase of water and acetonitrile (3:7 v/v, including 0.1% formic acid). The protonated precursor ion [M+H]+ and major fragment ion were confirmed at m/z 374.06 and 241.99 for oTR, and 348.23 and 216.06 for the IS, respectively. oTR was stable under bench and storage conditions. The analytical method met the criteria of FDA-validated bioanalytical methods and was successfully applied to a pharmacokinetic study for the first time following oral, subcutaneous, and intravenous administrations. While oTR was merely absorbed by an oral route, 90% of the absolute subcutaneous bioavailability was observed.