Huge quantities of microplastics are "hidden" in the sediment of China's largest urban lake-Tangxun Lake.

Microplastics (MPs) pollution in Tangxun Lake, the largest urban lake in China, was investigated. The average MPs pollution in sediment (1.81 ± 1.75 × 104 items kg-1) is at a high level, while the MPs in lakeshore water (917.77 ± 742.17 items m-3) is in the middle to low level compared with existing studies, which is related to the government's protection. Fragments and fibers are the most common shapes in sediment and water, respectively. MPs size <1 mm dominates in the sediment, while the MPs in water has a larger size. The distribution of MPs in the inner lake shows that pellets tend to "hidden" in sediments. Suspected MPs are randomly selected for polymer detection by Micro-Raman microscopy. Polypropylene (PP), polyethylene (PE) and polyethylene terephthalate (PET) are the most common polymer types in water, sediment and atmospheric deposition MPs samples. The input of wastewater, fishery and surrounding human activities are the main sources of MPs in sediment. Atmospheric deposition has a great impact on the distribution of MPs, while the contribution of surface runoff to lake MPs is not remarkable. In addition, MPs in sediments have exceeded the environmental carrying capacity. More attention should be focused on the sediment, where huge amounts of MPs are "hidden".

Contact-Resistance-Free Stretchable Strain Sensors with High Repeatability and Linearity.

Most of the existing stretchable strain sensors are based on the contact-resistance mechanism, where the stretchability and resistance variation depend on the change of the contact relationship of the conductive microstructures. These sensors usually exhibit large sensing ranges and gauge factors but unsatisfactory repeatability and linearity of the electrical responses because the contact is unstable. Here, we report a completely different design for stretchable strain sensors based on a contact-resistance-free structure, i.e., the off-axis serpentine sandwich structure (OASSS), with the mechanism of the stretch-bending-stretch transformation (SBST). Neither unstable contact resistance nor nonlinear constitutive and geometric behaviors occur for the OASSS while the sensor undergoes a large applied strain (50%), which guarantees high repeatability (repeatability error = 1.58%) and linearity (goodness-of-fit >0.999). Owing to such performances, the present sensors are not only applied to monitoring human activities and medical surgery but also to the ground tests of Tianwen-1, China's first Mars exploration mission.

[Characteristics and Health Risk Assessment of Heavy Metals in PM2.5 Under Winter Haze Conditions in Central China: A Case Study of Huanggang, Hubei Province].

To explore the pollution characteristics and potential health risks of heavy metals in PM2.5 on haze days in Central China, PM2.5 samples were collected from the Huanggang monitoring station, a regional observation point in Central China, between January 13 and 24, 2018. The contents of Cr, Mn, Co, Ni, Cu, Zn, As, Cd, Sn, and Pb in PM2.5 were analyzed by inductively coupled plasma mass spectrometry(ICP-MS), and the enrichment factor method was used to determine the potential risk based on the exposure model recommended by the Environmental Protection Administration(EPA). The results showed that during the observation period, the concentrations of Zn in PM2.5 were highest, and the concentrations of the carcinogens As and Cd were higher than the secondary standard limits of China's ambient air quality standard(GB 3095-2012), with 70% of these elemental concentrations accounting for the largest proportion in the middle haze period. The enrichment factor analysis showed that Cd, Sn, Co, Pb, and Zn were the most abundant elements, especially during the middle haze period, and were mostly derived from transportation and coal combustion. The results of the human health risk assessment showed that exposure via hand-mouth feeding was the main non-carcinogenic risk, and the exposure and non-carcinogenic risks of children were significantly higher than those of adults. Pb poses a non-carcinogenic risk to children, while heavy metals in PM2.5 pose no non-carcinogenic risks to adults and carcinogenic heavy metals pose no carcinogenic risks.

Deposition records of polycyclic aromatic hydrocarbons and black carbon in peat core from Dajiuhu, Shennongjia, Central China: human activity imprint since the industrial revolution.

Polycyclic aromatic hydrocarbons (PAHs) are a kind of organic pollutants with carcinogenic, teratogenic, and mutagenic effects. This study aims to assess the effects of changes in China's socio-economic indicators represented by energy consumption and number of motor vehicles, on PAHs and black carbon (BC) deposition. For this, a 50-cm peat core from Dajiuhu peatland, Central China, was collected and divided into 50 subsamples to establish a sedimentary record of about 200 years with radioactive 210Pb. The Σ16PAH concentration ranged from 212.67 to 830.10 ng·g-1, mainly composed of 2- and 3-ring PAHs, and BC ranged from 7.89 to 36.48%. The deposition characteristics of BC first increased and then decreased from the core bottom to the top. The predominant of the carcinogenic PAHs (C-PAHs) was Dibenzo[a,h]anthracene (DBA) before 1949, and then changed to Benzo[b]fluoranthene (BbF). Ratio of Fla/Pyr, (3+4)-ring/(5+6)-ring PAHs, and BaA/(BaA+Chr), IcdP/(IcdP+BghiP) suggested that long-range atmospheric transmission (LRAT) and pyrogenic were the main PAHs sources, but that local PAH emission contribution gradually increased since 1990, and mixed (petroleum and combustion) sources were the dominant since 2000. The high concentration of Phenanthrene (Phe) and Naphthalene (Nap) were likely from plant product. Furthermore, increased concentrations of 4-, 5-, and 6-ring PAHs showed significant correlations with increased coal and petroleum consumption and the number of motor vehicles, respectively, and this influence has strengthened after 2000. These were caused by rapid urbanization and industrialization following the implementation of the reform and opening up policy in 1978, and a new round of urbanization after 2000.

Growth model for large branched three-dimensional hydraulic crack system in gas or oil shale.

Recent analysis of gas outflow histories at wellheads shows that the hydraulic crack spacing must be of the order of 0.1 m (rather than 1 m or 10 m). Consequently, the existing models, limited to one or several cracks, are unrealistic. The reality is 10(5)-10(6) almost vertical hydraulic cracks per fracking stage. Here, we study the growth of two intersecting near-orthogonal systems of parallel hydraulic cracks spaced at 0.1 m, preferably following pre-existing rock joints. One key idea is that, to model lateral cracks branching from a primary crack wall, crack pressurization, by viscous Poiseuille-type flow, of compressible (proppant-laden) frac water must be complemented with the pressurization of a sufficient volume of micropores and microcracks by Darcy-type water diffusion into the shale, to generate tension along existing crack walls, overcoming the strength limit of the cohesive-crack or crack-band model. A second key idea is that enforcing the equilibrium of stresses in cracks, pores and water, with the generation of tension in the solid phase, requires a new three-phase medium concept, which is transitional between Biot's two-phase medium and Terzaghi's effective stress and introduces the loading of the solid by pressure gradients of diffusing pore water. A computer program, combining finite elements for deformation and fracture with volume elements for water flow, is developed to validate the new model.This article is part of the themed issue 'Energy and the subsurface'.

Dissolution chemistry and biocompatibility of single-crystalline silicon nanomembranes and associated materials for transient electronics.

Single-crystalline silicon nanomembranes (Si NMs) represent a critically important class of material for high-performance forms of electronics that are capable of complete, controlled dissolution when immersed in water and/or biofluids, sometimes referred to as a type of "transient" electronics. The results reported here include the kinetics of hydrolysis of Si NMs in biofluids and various aqueous solutions through a range of relevant pH values, ionic concentrations and temperatures, and dependence on dopant types and concentrations. In vitro and in vivo investigations of Si NMs and other transient electronic materials demonstrate biocompatibility and bioresorption, thereby suggesting potential for envisioned applications in active, biodegradable electronic implants.