Synthesis of lipophilic antioxidant tyrosol laurate using imidazolium ionic liquid [Bmim]HSO4 as a catalyst.

Tyrosol is a natural phenolic compound with potent antioxidant properties in the field of food manufacturing. However, the low lipophilicity of tyrosol limited its application. Therefore, the construction of tyrosol laurate (Tyr-L) could effectively overcome the limitations of tyrosol. In this work, four ionic liquids (ILs) were applied for TYr-L preparation. Among them, the 1-butyl-3-methylimidazolium hydrogen sulfate ([Bmim]HSO4) showed the best catalytic performance. The maximum TYr-L yield was achieved (94.24 ± 1.23 %) under the optimal conditions (reaction temperature 119 °C, substrate ratio 1:6.7, IL dosage 9.2 %, and reaction time 12 h). The kinetic and thermodynamic parameters were also evaluated and it was found that Ea, ΔH, ΔS, and ΔG were 80.81 kJ·mol-1, 77.63 kJ·mol-1, -82.08 J·(mol·K)-1, and 109.89 kJ·mol-1, respectively. The acidic [Bmim]HSO4 demonstrated excellent reusability and stability, even after 6 cycles. Furthermore, TYr-L showed superior ABTS radical scavenging ability, which could be further applied in various industrial processes.

Tiger nut (Cyperus esculentus L.) oil: A review of bioactive compounds, extraction technologies, potential hazards and applications.

Tiger nut is a tuber of a plant native in the Mediterranean coastal countries, which is of great interest in food industry due to its richness in carbohydrates, lipids, starches, minerals, etc. Recent studies have focused on the analysis of the phytochemical composition of tiger nut, including six essential nutrients, polyphenols, and the extraction of proteins, starches, and phenolic compounds from the by-products of tiger nut milk 'horchata'. Few works were focused on the possibility of using tiger nut oil, a nutritious oil comparable to olive oil, as an edible oil. Therefore, this review discussed some extraction technologies of tiger nut oil, and their effects on the properties of oil, such as bioactive compounds, oxidative stability and potential hazards. The information on the emerging applications of tiger nut oil was summarized and an outlook on the utilization of tiger nut oil by-products were also reviewed.

Preparation of a novel healthy tiger nut oil-based margarine fat with low trans and saturated fatty acids.

The present study sought to develop a novel healthy margarine fat with low levels of trans and saturated fatty acids in order to promote healthier alternatives. In this work, tiger nut oil was first used as a raw material to prepare margarine fat. The effects of mass ratio, reaction temperature, catalyst dosage, and time on the interesterification reaction were investigated and optimized. The results showed that, the margarine fat with ≤40% saturated fatty acids was achieved using a 6:4 mass ratio of tiger nut oil to palm stearin. The ideal interesterification parameters were 80 °C, 0.36% (w/w) catalyst dosage, and 32 min. Compared with physical blends, the interesterified oil had lower solid fat content (3.71% at 35 °C), lower slip melting point (33.5 °C), and lower levels of tri-saturated triacylglycerols (1.27%). This investigation provides important information for the utilization of tiger nut oil in healthy margarine formulation.

Towards the development of novel bicomponent phytosterol-based oleogels with natural phenolics.

Structuring liquid oils into edible oleogels from natural and abundant plant ingredients has great significance in fields ranging from foods to pharmaceuticals but has proven challenging. Herein, novel bicomponent phytosterol-based oleogels were developed with natural phenolics. Investigating diverse natural phenolics, cinnamic acid (CA) and ethyl ferulate (EF) successfully formed oleogels in combination with phytosterols (PS), where a synergistic effect on the oleogelation and crystallization was observed compared to the corresponding single component formulations. FTIR and UV-vis spectra showed that the gel network was primarily driven by hydrogen bonding and π-π stacking. Furthermore, oscillatory shear demonstrated oleogels featured higher elastic and network structure deformation at molar ratio of 5:5 and 3:7. Moreover, the bicomponent phytosterol-based oleogels displayed partially reversible shear deformation and a reversible solid-liquid transition. Such information was useful for engineering the functional properties of oleogel-based lipidic materials, providing significance for the application in foods, cosmetics and pharmaceuticals industries.

Fabrication and characterization of novel thermoresponsive emulsion gels and oleogels stabilizied by assembling nanofibrous from dual natural triterpenoid saponins.

Novel thermoresponsive emulsion gels and oleogels were fabricated by assembling nanofibrous from natural triterpenoid Quillaja saponin (QS) and glycyrrhizic acid (GA). The viscoelasticity of QS-coated emulsion was observed to be remarkably improved by GA and thus obtain the advantages of excellent gelatinous, thermoresponsive and reversible manner due to the viscoelastic texture from GA nanofibrous as scaffolds in continuous phase. In the gelled emulsions, the phase transition of the GA fibrosis network structure upon heating and cooling was attributed to a thermal sensitivity, whereas interface-induced fibrosis assembly of amphiphilic QS endowed the formation of stable emulsion droplets. Then these emulsion gels were further used as an effective template to fabricate soft-solid oleogels with high oil content of 96%. These findings open up new opportunities for the use of all-natural and sustainable ingredients to develop smart soft materials for replace trans and saturated fats in food industry and other fields.

Edible HIPE-Gels and oleogels formed by synergistically combining natural triterpenoid saponin and citrus dietary fiber.

High-internal-phase emulsion gels (HIPE-Gels) and oleogels were successfully fabricated through synergistically combination of natural triterpenoid Quillaja saponin (QS) and citrus dietary fiber (CDF). The amphiphilic QS significantly lowered the oil-water interface tension; whereas CDF could form compact structure at the interface as well as in the bulk under a hydrogen-bonding interaction with saponin. The combination endowed the emulsion gels with enhanced performance, such as decreasing droplet size, strengthening gel network structure and better viscoelastic. At a very low QS of 0.045 %, stable HIPE-Gels can be produced with 0.3 % CDF, which mainly attributing to the highly viscoelastic fiber networks in continuous phase and thus actively trap the QS-coated emulsion droplets. Consequently, the robust HIPE-Gels were applied as soft template to fabricate oleogels with controlled by QS and CDF loading. These findings proved an effective strategy towards structuring edible liquid oil into healthy gels for alternating saturated and trans fats in foods.

Co-occurrence of aflatoxins in plant oil products from China.

Aflatoxins have been detected as contaminants of oil crops before harvesting and drying, during storage and manufacturing and could be transferable to plant oils. There are more than 20 different types of aflatoxins, among which the most commonly occurring are the B1, B2, G1 and G2. Concentrations of these four aflatoxins were determined in plant oils from retail shops in China and in crude peanut oil extracted from culled mouldy peanuts by HPLC with fluorescence detection. Overall, aflatoxins were present in 25 of the 63 samples. The four aflatoxins co-existed in vegetable oil, but the content of AFB1 was usually higher than the other aflatoxins. Particularly in the case of highly contaminated oil samples, AFB1 accounted for 68% of the total aflatoxins. According to the health risk assessment, the low margin of exposure values from AFB1 in oils suggests a high level of concern for children.

Lipophilic antioxidant dodecyl caffeate preparation by the esterification of caffeic acid with dodecanol using ionic liquid [Hnmp]HSO4 as a catalyst.

Caffeic acid (CA) is widely found in nature, and has a broad spectrum of biological activities. However, the low hydrophilicity and lipophilicity of CA limited its application. Dodecyl caffeate (DC) is the lipophilic ester of caffeic acid (CA), and also has high antioxidant activity. In this work, CA, used as a substrate, and three ionic liquids with different acidities and H2SO4 were used as economic catalysts for DC preparation. The effects of variables on DC yield were investigated and optimized by response surface methodology (RSM). And the kinetic and thermodynamic parameters of the esterification of CA and dodecanol were evaluated. Results showed that lipophilic DC was successfully synthesized using ionic liquid ([Hnmp]HSO4) as a catalyst. And the optimal conditions by RSM were substrate ratio of 10.2 : 1, IL dosage of 9.8% at 87 °C for 118 min. Under the optional conditions, the maximum DC yield was 94.67 ± 1.32%. The k 0, E a, ΔH, ΔS, and ΔG were 7.18 × 107 mol (L min)-1, 65.77 kJ mol-1, 63.10 kJ (mol K)-1, -103.80 J (mol K)-1, and 99.78 kJ mol-1 at 363 K, respectively. DC prepared in this work showed a good DPPH radical scavenging activity, which indicated that DC can be used as a potential antioxidant in food and cosmetics.

Structuring of Edible Liquid Oil into Smart Thermo-Triggered Soft Matters for Controlled Bioactive Delivery.

Growing interest is being dedicated to smart soft matters because of their potential in controlling bioactives upon exposure to an appropriate stimulus. Herein, structuring of edible liquid oil into oleogels and emulgels as smart thermo-triggered soft vehicles for controllable release of diverse nutrients was developed. Edible liquid oil was trapped inside the crystal network structure of phytosterols and monoglycerides resulting in bicomponent solidlike oleogels. Subsequently, both water-in-oleogel (W/O) emulgels and glycerol-in-oleogel (G/O) emulgels were further fabricated by spatial distribution of the stabilizing interfacial crystals around dispersed droplets as well as the network crystals in the continuous phase. Rheological measurements showed that the gel strength of the oleogel-based emulgels depends on the fraction of the aqueous phase and is greater than that of corresponding oleogels due to a filler effect of dispersed aqueous droplets within the crystal network, offering an additional strategy to tune the structure and rheology. Comparatively, introducing glycerol endowed a higher gel strength for the oleogel-based emulgels than water, particularly at increased filler loads. In addition, these soft matters exhibited interesting thermoresponsive nature, which exhibit the flexibility for programmed release of coencapsulated bioactive components upon exposure to an appropriate thermal triggered switchable. The resulted smart thermo-triggered soft matters have emerging opportunities for application in functional active ingredient delivery by on-demand strategies.

Oil-Water Interfacial-Directed Spontaneous Self-Assembly of Natural Quillaja Saponin for Controlling Interface Permeability in Colloidal Emulsions.

Assembly of amphiphiles at the interface of two immiscible fluids is of great scientific and technological interest in offering efficient routes to smart vehicles for functional deliveries. Natural Quillaja saponin (QS) has gathered widespread interest within the scientific community as a result of its unique interfacial properties. Herein, spontaneously interface-driven self-assembly (SIDSA) of QS at the oil-water interface was systematically studied by morphology and spectroscopy. It was found to self-assemble into a micrometer-scale network in helical fibers by combined intermolecular π-π stacking and hydrogen bonding among saponins at the liquid-liquid interface. From SIDSA, multilayer films on the surfaces of dispersed droplets were formed and enhanced emulsion stability. Interfacial QS-based films on droplet surfaces were also shown to confine interfacial diffusion processes by serving as transport barriers. Furthermore, they can be exploited to control the release of volatiles from the dispersed liquid phase by regulating the interface film, which is shown by molecular dynamics to occur through a hydrogen-bonded mechanism. These results provide new insight into the interfacial assembly structure that can enable unique controllable release in a broad range of applications in food, beverages, pharmaceuticals, and cosmetics.

Hydrophilic Glyceryl Ferulates Preparation Catalyzed by Free Lipase B from Candida antartica.

Ferulic acid (FA), 4-hydroxyl-3-methoxy-2-benzylacrylic acid, has antioxidant, anticancer and ultraviolet absorption activities. However, the low hydrophilicity of FA has limited its application. Glyceryl ferulate (FG), which is an all-natural hydrophilic derivative of FA, can be used as an antioxidant and UV filter in food and cosmetic formulations. However, the applications of FG in these fields are limited due to its low content in nature. In this work, free liquid lipase was firstly used as a catalyst for FG preparation. Several different free liquid lipases (Candida antartica lipase-B, Candida antartica lipase-A, Thermomyces lanuginosus (Lipozyme TL 100L)) were screened and compared. The effects of the transesterification parameters (time, temperature, enzyme load and substrate ratio) were optimized and evaluated by response surface methodology. A reaction thermodynamic investigation was also performed. The results showed that, among the tested free lipases, the maximum FG yield (84.8±1.5%) was achieved using free Candida antartica lipase-B. Under the optimized conditions (an atmospheric system, an enzyme load of 11.1% and a 20:1 molar ratio of glycerol to EF at 70°C for 39.5 h), the FG yield and EF conversion were 84.8±1.5% and 95.7±1.2%, respectively. The activation energies of FG formation and EF conversion were 56.4 and 58.0kJ/mol, respectively.

Influence of ionic liquid on Novozym 435-catalyzed the transesterification of castor oil and ethyl caffeate.

Caffeic acid (CA), one kind of phenolic acids widely occurring in the plant kingdom, can be used as potential UV protective ingredient and antioxidant. However, the application of CA was limited because of its unsatisfactory solubility in hydrophilic and lipophilic media. In this work, BMIMPF6, one kind of ionic liquids (ILs), was developed as an environmental friendly reaction media for the enzymatic preparation of CA derivatives by the transesterification of castor oil (CO) and ethyl caffeate (EC). Different series of ILs with BF 4 - , TF 2 - , and PF 6 - were screened and compared, and the effects of transesterification variables [temperature (60-100 °C) enzyme concentration (10-90 mg/mL), substrate molar ratio (CO/EC, 1:1-5:1), water load (0-8%), and reaction pressure] were also investigated. Results showed that, in the IL system, hydrophilic and lipophilic products were formed by two competitive reactions [(i) hydrolysis + transesterification and (ii) transesterification]. The maximum hydrophilic caffeoyl lipids yield (26.10 ± 0.28%) and reaction selectivity for hydrophilic caffeoyl lipids (0.4) was achieved in BMIMPF6 system. The increases of substrate ratio (molar ratio of CO to EC, from 1:1 to 5:1), water load (from 0 to 8%), and enzyme concentration (from 10 to 90 mg/mL) were in favor of hydrophilic caffeoyl lipid formation. However, the vacuum system and high temperature (from 70 to 100 °C) are favorable for lipophilic caffeoyl lipids formation. Under the optimal reaction conditions (90 °C, 75 mg/mL enzyme concentration, substrate ratio 3:1, 60 h, and 10 mmHg vacuum pressures), the maximum EC conversion was 72.48 ± 2.67%. The activation energies of the transesterification, and the selective formations of lipophilic and hydrophilic products were calculated as 44.55, 47.65, and 54.96 kJ/mol, respectively.

Engineering phytosterol-based oleogels for potential application as sustainable petrolatum replacement.

Phytosterol-based oleogels have been engineered in edible oils for potential applications as sustainable replacements for petrolatum. Oleogels have emerged with a crystal network structure with oil molecules trapped inside. In addition, the viscosity of highly thixotropic oleogels could be tuned by manipulating the concentration of phytosterols and monoglycerides, and the type of surface-active small molecules and bulk vegetable oils. Furthermore, viscous soft matter could also be tunably made with 8-20% oleogelators in olive oil with favourable water vapour occlusive and wettability properties, in addition to having good texture, and outstanding thixotropic and thermal reversibility properties. These properties are quite similar to those of commercial petrolatum. This work demonstrates that the natural phytosterol-oleogels in edible oils can be a novel source of sustainable and green replacements for petrolatum.

Enzymatic incorporation of caffeoyl into castor oil to prepare the novel castor oil-based caffeoyl structured lipids.

In this work, a novel castor oil-based caffeoyl structured lipids was successfully prepared by the enzymatic transesterification using castor oil (CO) as caffeoyl acceptor. During the structured lipids preparation, two competitive reactions, the hydrolysis of CO to form hydrophilic caffeoyl glycerols (CG)+dicaffeoyl glycerols (DCG) and the transesterification of CO with ethyl caffeate (EC) to form lipophilic caffeoyl mono- and di-acylglycerols (CMAG and CDAG), were found. Reaction progress was monitored using HPLC-ESI-MS and HPLC-UV. The effects of by-product ethanol removal and reaction variables on the transesterification and reaction selectivity were evaluated. Results showed that, the activation energies for the transesterification and for the selective formations of CMAG+CDAG and CG+DCG were 57.60kJ/mol, 58.86kJ/mol, and 60.53kJ/mol, respectively. Under the optimal reaction conditions (enzyme load 23%, 90°C, 1:3 molar ratio of EC to CO, and 46.5h), EC conversion and the yield of CMAG+CDAG were 93.68±2.52% and 78.11±1.35%, respectively.

Thermal Losses of Tertiary Butylhydroquinone (TBHQ) and Its Effect on the Qualities of Palm Oil.

The rules and patterns of thermal losses of tertiary butylhydroquinone (TBHQ) in palm oil (PO) and its effect on the qualities of PO were investigated by oven heating method. Volatilization and transformation products of TBHQ in PO were also studied in detail under heating treatment. Results showed that at low temperature (< 135°C), TBHQ had better antioxidative properties, while its antioxidative potency to PO was significantly weakened at high temperature (≥ 135°C). In addition, as heating temperatures increased and heating time prolonged, losses of TBHQ significantly increased in PO. Volatilization was the major pathway for losses of TBHQ in PO under heating treatment. Meanwhile, a small portion of TBHQ was transformed and the major transformation product was 2-tertbutyl-1,4- benzoquinone (TQ). Moreover, TQ and several decomposition products of PO were also observed in the volatilization products of TBHQ.

Enhanced Extraction of Oil from Flaxseed (Linum usitatissimum L.) Using Microwave Pre-treatment.

The effect of microwave (MW) pre-treatment on the extraction of flaxseed oil was investigated by hot extraction (HE). Nine MW pre-treatments were established, combining three MW radiation intensities (12, 18 and 24 W/g) and three MW radiation times of pre-treatment (90, 150 and 210 s). Extraction yield increased significantly with MW pre-treatments of flaxseed, and a max oil extraction yield (78.11%) can be obtained using MW pre-treatment at 18 W/g for 210 s. Scanning electronic microscopy showed that the microstructure of treated samples (18 W/g and 210 s) was modified compared with that of untreated samples. The fatty acid compositions (palmitic acid 5.85±0.01%, stearic acid 3.00±0.01%, oleic acid 17.64±0.07%, linoleic acid 16.16±0.06%, and linolenic acid 57.37±1.32%) of the oils extracted by the MW pre-treatments HE were similar with that of the conventional HE method. Results showed that fatty acid compositions of flaxseed oil were not affected by MW pre-treatments.

Comparative Study of Soybean Oil and the Mixed Fatty Acids as Acyl Donors for Enzymatic Preparation of Feruloylated Acylglycerols in Ionic Liquids.

Feruloylated acylglycerols (FAGs) are the lipophilic derivatives of ferulic acid. In this work, soybean oil (SBO) and the mixed fatty acids (MFA) were selected as fatty acyl donors, and reacted with glyceryl monoferulate (GMF) to prepare FAGs in ionic liquids (ILs). Effect of various reaction parameters (time, temperature, enzyme concentration, and substrate ratio) and ILs on the GMF conversion and the reaction selectivity for FAGs formation were investigated. Response surface methodology (RSM) based on a 3-level-4-factor Box-Behnken experimental design was employed to evaluate the inactive effect of reaction parameters. For the esterification of GMF with MFA, the maximum GMF conversion (98.9 ± 0.9%) and FAG yield (88.9 ± 0.6%) were achieved in [C10mim]PF6. However, for the transesterification of GMF with SBO, the maximum GMF conversion (94.3 ± 0.7%) and FAG yield (83.8 ± 1.0%) were obtained in [C12mim]PF6. High FAG selectivities (∼0.90) were also obtained using SBO or MFA as acyl donors.

Detection and quantification of adulteration of sesame oils with vegetable oils using gas chromatography and multivariate data analysis.

This study was performed to develop a hierarchical approach for detection and quantification of adulteration of sesame oil with vegetable oils using gas chromatography (GC). At first, a model was constructed to discriminate the difference between authentic sesame oils and adulterated sesame oils using support vector machine (SVM) algorithm. Then, another SVM-based model is developed to identify the type of adulterant in the mixed oil. At last, prediction models for sesame oil were built for each kind of oil using partial least square method. To validate this approach, 746 samples were prepared by mixing authentic sesame oils with five types of vegetable oil. The prediction results show that the detection limit for authentication is as low as 5% in mixing ratio and the root-mean-square errors for prediction range from 1.19% to 4.29%, meaning that this approach is a valuable tool to detect and quantify the adulteration of sesame oil.

Lipase-catalyzed hydrolysis of linseed oil: optimization using response surface methodology.

Lipase-catalyzed hydrolysis of linseed oil was investigated. Four commercially available microbial lipases of Lipase AY, Lipozyme RMIM, Lipozyme TLIM, and Novozym 435 were used. Among these tested lipases, Lipase AY exhibited the best hydrolysis effeciency to linseed oil. The effect of reaction variables was also evaluated and optimized using response surface methodology. A second-order regression for the Box-Behken design was used to study the effect of five independent variables, such as, temperature, pH, oil-aqueous phase ratio, enzyme load, and reaction time, on the hydrolysis of linseed oil. The optimal conditions were as follows: temperature 33°C, pH 5.80, oil-aqueous phase ratio 0.90 (w/w), enzyme load 1.20% (relative to the weight of total substrates), and reaction time 3.33 h. Under these conditions, the hydrolysis ratio of linseed oil was 93.92±0.54%.

Solvent-free enzymatic synthesis of feruloylated structured lipids by the transesterification of ethyl ferulate with castor oil.

A novel enzymatic route of feruloylated structured lipids synthesis by the transesterification of ethyl ferulate (EF) with castor oil, in solvent-free system, was investigated. The transesterification reactions were catalysed by Novozym 435, Lipozyme RMIM, and Lipozyme TLIM, among which Novozym 435 showed the best catalysis performance. Effects of feruloyl donors, reaction variables, and ethanol removal on the transesterification were also studied. High EF conversion (∼100%) was obtained under the following conditions: enzyme load 20% (w/w, relative to the weight of substrates), reaction temperature 90 °C, substrate molar ratio 1:1 (EF/castor oil), 72 h, vacuum pressure 10 mmHg, and 200 rpm. Under these conditions, the transesterification product consisted of 62.6% lipophilic feruloylated structured lipids and 37.3% hydrophilic feruloylated lipids.