Triboelectric-Responsive Drug Delivery Hydrogel for Accelerating Infected Wound Healing.

Electrotherapy is of great interest in the field of tissue repair as an effective, well-tolerated, and noninvasive treatment. Triboelectric nanogenerator (TENG) has shown advantages in promoting wound healing due to its peak output characteristic and low Joule heating effect. However, it is limited in infected wound healing due to poor antimicrobial capacity. Here, a wearable triboelectric stimulator (WTS) is developed that consists of a flexible TENG (F-TENG) and a triboelectric-responsive drug delivery hydrogel (TR-DDH) for healing of bacterium-infected wounds. F-TENG can generate pulsed current to wounds by converting mechanical energy from body movements. Polypyrrole is prone to reduction and volume contraction under electrical stimulation, resulting in desorption of curcumin nanoparticles (CUR NPs) from the polypyrrole in TR-DDH. Therefore, the highly efficient and controllable release of CUR NPs can be achieved by triboelectric stimulation. According to the in vitro and in vivo experiments, WTS has the greatest antimicrobial effect and the fastest promotion of infected wound healing compared to treatment with electrical stimulation or curcumin. Finally, the safety assessment demonstrates that the WTS has excellent tissue safety for chronic wound healing. Synergistic therapy with WTS provides an efficient strategy for chronic wound healing and smart-responsive drug delivery systems.

In situ polymerization of a melamine-based microsphere into 3D nickel foam for supercapacitors.

An in situ synthesis approach is used to directly grow a microsphere of melamine-glutaraldehyde (MAGA) polymer over three-dimensional (3D) nickel foam (NF). The materials are used to produce nitrogen-doped carbon (NC) with and without NF. These precursors undergo carbonization at various temperatures, namely 400 °C, 500 °C, and 700 °C. The electrochemical properties of the materials would be significantly improved by directly growing MAGA polymer on the surface of NF. The electrochemical performance of NC/NF-400 was excellent, with a capacitance of 297 F g-1 achieved at a current density of 1 A g-1. The in situ growing approach does not necessitate the use of additional chemical agents, such as binders or conductive compounds when preparing the electrode. In addition, the material exhibits only 10% reduction in capacitance after undergoing 5000 cycles, indicating excellent cycling performance. The outstanding electrochemical performance achieved by using the in situ method of MAGA microsphere polymer on NF may be attributed to the rapid transit of ions to the electrode surfaces, facilitating effortless redox reactions.

A Bio-Inspired Spiking Neural Network with Few-Shot Class-Incremental Learning for Gas Recognition.

The sensitivity and selectivity profiles of gas sensors are always changed by sensor drifting, sensor aging, and the surroundings (e.g., temperature and humidity changes), which lead to a serious decline in gas recognition accuracy or even invalidation. To address this issue, the practical solution is to retrain the network to maintain performance, leveraging its rapid, incremental online learning capacity. In this paper, we develop a bio-inspired spiking neural network (SNN) to recognize nine types of flammable and toxic gases, which supports few-shot class-incremental learning, and can be retrained quickly with a new gas at a low accuracy cost. Compared with gas recognition approaches such as support vector machine (SVM), k-nearest neighbor (KNN), principal component analysis (PCA) +SVM, PCA+KNN, and artificial neural network (ANN), our network achieves the highest accuracy of 98.75% in five-fold cross-validation for identifying nine types of gases, each with five different concentrations. In particular, the proposed network has a 5.09% higher accuracy than that of other gas recognition algorithms, which validates its robustness and effectiveness for real-life fire scenarios.

Prediction of •OH-Initiated and •NO3-Initiated Transformation Products of Polycyclic Aromatic Hydrocarbons by Electronic Structure Approaches.

The abiotic reaction products of polycyclic aromatic hydrocarbons (PAHs) with hydroxyl radicals (•OH) and nitrate radicals (•NO3) are nitro-, oxygen-, and hydroxyl-containing PAHs (NPAHs, OPAHs, and OHPAHs). Four methods of the highest occupied molecular orbital (HOMO), Fukui function (FF), dual descriptor (DD), and population of π electrons (PP-π) are selected to predict the chemical reactivity of PAHs attacked by •OH and •NO3 in this study. The predicted •OH-initiated and •NO3-initiated transformation products are compared with the main PAH transformation products (PAH-TPs) observed in the laboratory. The results indicate that PP-π and DD approaches fail to predict the transformation products of fused PAHs containing five-membered rings. By predicting the PAH-TPs of 13-14 out of the 15 parent PAHs accurately, HOMO and FF methods were shown to be suitable for predicting the transformation products formed from the abiotic reactions of fused PAHs with •OH and •NO3.

Thermodynamics-Kinetics-Balanced Metal-Organic Framework for In-Depth Radon Removal under Ambient Conditions.

Radon (Rn), a ubiquitous radioactive noble gas, is the main source of natural radiation to human and one of the major culprits for lung cancer. Reducing ambient Rn concentration by porous materials is considered as the most feasible and energy-saving option to lower this risk, but the in-depth Rn removal under ambient conditions remains an unresolved challenge, mainly due to the weak van der Waals (vdW) interaction between inert Rn and adsorbents and the extremely low partial pressure (<1.8 × 10-14 bar, <106 Bq/m3) of Rn in air. Adsorbents having either favorable adsorption thermodynamics or feasible diffusion kinetics perform poorly in in-depth Rn removal. Herein, we report the discovery of a metal-organic framework (ZIF-7-Im) for efficient Rn capture guided by computational screening and modeling. The size-matched pores in ZIF-7-Im abide by the thermodynamically favorable principle and the exquisitely engineered quasi-open apertures allow for feasible kinetics with little sacrifice of sorption thermodynamics. The as-prepared material can reduce the Rn concentration from hazardous levels to that below the detection limit of the Rn detector under ambient conditions, with an improvement of at least two orders of amplitude on the removal depth compared to the currently best-performing and only commercialized material activated charcoal.

Bone Repairment via Mechanosensation of Piezo1 Using Wearable Pulsed Triboelectric Nanogenerator.

Bone repair in real time is a challenging medical issue for elderly patients; this is mainly because aged bone marrow mesenchymal stem cells (BMSCs) possess limited osteogenesis potential and repair capacity. In this study, triboelectric stimulation technology is used to achieve bone repair via mechanosensation of Piezo1 by fabricating a wearable pulsed triboelectric nanogenerator (WP-TENG) driven by human body movement. A peak value of 30 µA has the optimal effects to rejuvenate aged BMSCs, enhance their osteogenic differentiation, and promote human umbilical vein endothelial cell tube formation. Further, previous studies demonstrate that triboelectric stimulation of a WP-TENG can reinforce osteogenesis of BMSCs and promote the angiogenesis of human umbilical vein endothelial cells (HUVECs). Mechanistically, aged BMSCs are rejuvenated by triboelectric stimulation via the mechanosensitive ion channel Piezo1. Thus, the osteogenesis potential of BMSCs is enhanced and the tube formation capacity of HUVECs is improved, which is further confirmed by augmented bone repair and regeneration in in vivo investigations. This study provides a potential signal transduction mechanism for rejuvenating aged BMSCs and a theoretical basis for bone regeneration using triboelectric stimulation generated by a WP-TENG.

Rejuvenation of Senescent Bone Marrow Mesenchymal Stromal Cells by Pulsed Triboelectric Stimulation.

Stem cell senescence contributes to stem cell exhaustion and drives various aging-associated disorders. However, strategies to rejuvenate senescent stem cells are limited. The present study proposes an approach based on triboelectric stimulation to rejuvenate senescent bone marrow mesenchymal stromal cells (BMSCs) by fabricating a pulsed triboelectric nanogenerator (P-TENG) that can produce stable pulsed current output unaffected by the triggered frequency. The senescence phenotypes of aged BMSCs are reversed by triboelectric stimulation at 30 µA at 1.5 Hz. Triboelectric stimulation enhances the proliferation of aged BMSCs and increases their pluripotency and differentiation capacity. Additionally, mechanistic investigations reveal that pulsed triboelectric stimulation by P-TENG rejuvenates senescent BMSCs by enhancing MDM2-dependent p53 degradation, which is demonstrated by loss-of-function studies of MDM2 and p53. Overall, this study identifies a new approach for the rejuvenation of senescent BMSCs and describes a promising therapeutic intervention for many diseases associated with aged BMSCs.

Efficient degradation of naproxen by persulfate activated with zero-valent iron: performance, kinetic and degradation pathways.

Degradation of naproxen (NAP) by persulfate (PS) activated with zero-valent iron (ZVI) was investigated in our study. The NAP in aqueous solution was degraded effectively by the ZVI/PS system and the degradation exhibited a pseudo-first-order kinetics pattern. Both sulfate radical (SO4 •-) and hydroxyl radical (HO•) participate in the NAP degradation. The second-order rate constants for NAP reacting with SO4 •- and HO• were (5.64 ± 0.73) × 109 M- 1 s- 1 and (9.05 ± 0.51) × 109 M- 1 s- 1, respectively. Influence of key parameters (initial pH, PS dosage, ZVI dosage, and NAP dosage) on NAP degradation were evaluated systematically. Based on the detected intermediates, the pathways of NAP degradation in ZVI/PS system was proposed. It was found that the presence of ammonia accelerated the corrosion of ZVI and thus promoted the release of Fe2+, which induced the increased generation of sulfate radicals from PS and promoted the degradation of NAP. Compared to its counterpart without ammonia, the degradation rates of NAP by ZVI/PS were increased to 3.6-17.5 folds and 1.2-2.2 folds under pH 7 and pH 9, respectively.

Spiral Steel Wire Based Fiber-Shaped Stretchable and Tailorable Triboelectric Nanogenerator for Wearable Power Source and Active Gesture Sensor.

Continuous deforming always leads to the performance degradation of a flexible triboelectric nanogenerator due to the Young's modulus mismatch of different functional layers. In this work, we fabricated a fiber-shaped stretchable and tailorable triboelectric nanogenerator (FST-TENG) based on the geometric construction of a steel wire as electrode and ingenious selection of silicone rubber as triboelectric layer. Owing to the great robustness and continuous conductivity, the FST-TENGs demonstrate high stability, stretchability, and even tailorability. For a single device with ~ 6 cm in length and ~ 3 mm in diameter, the open-circuit voltage of ~ 59.7 V, transferred charge of ~ 23.7 nC, short-circuit current of ~ 2.67 µA and average power of ~ 2.13 µW can be obtained at 2.5 Hz. By knitting several FST-TENGs to be a fabric or a bracelet, it enables to harvest human motion energy and then to drive a wearable electronic device. Finally, it can also be woven on dorsum of glove to monitor the movements of gesture, which can recognize every single finger, different bending angle, and numbers of bent finger by analyzing voltage signals.

Electrochemical synthesis of ferrate(VI) using sponge iron anode and oxidative transformations of antibiotic and pesticide.

Passivation of anode is a main challenge in the electrochemical synthesis of ferrate(VI) (FeVIO42-, Fe(VI)). A series of electrochemical approaches were employed including polarization curve, cyclic voltammetry, and electrochemical impedance spectroscopy (EIS) to analyze the physicochemical processes involved in electrochemical synthesis of Fe(VI) using sponge iron and cast iron anodes. The results demonstrate that the sponge iron anode achieved higher yield of Fe(VI) compared to grey cast iron anode. The optimum condition to generate Fe(VI) using sponge iron was 35-50°C and 30mA/cm2. Significantly, the sponge iron anode could generate Fe(VI) for a long duration (>10h) under these conditions; possibly suitable for large scale synthesis of Fe(VI). The prepared Fe(VI) solution was used to treat antibiotic (sulfamethoxazole (SMX)) and pesticide (atrazine (ATZ)) in water. At a molar ratio of Fe(VI) to SMX as 20:1 in the pH range from 5.0 to 9.0, almost complete oxidative transformation of SMX could be obtained. Comparatively, oxidative transformation of ATZ was incomplete (∼70%) even when [Fe(VI)]:[ATZ]=87 at pH 5.0-9.0. Fluorescence spectra and cytotoxicity studies suggest that the oxidative transformation products of both SMX and ATZ possess lower toxicity than the parent antibiotic and pesticide, respectively.

Nanogenerators for Self-Powered Gas Sensing.

Looking toward world technology trends over the next few decades, self-powered sensing networks are a key field of technological and economic driver for global industries. Since 2006, Zhong Lin Wang's group has proposed a novel concept of nanogenerators (NGs), including piezoelectric nanogenerator and triboelectric nanogenerator, which could convert a mechanical trigger into an electric output. Considering motion ubiquitously exists in the surrounding environment and for any most common materials used every day, NGs could be inherently served as an energy source for our daily increasing requirements or as one of self-powered environmental sensors. In this regard, by coupling the piezoelectric or triboelectric properties with semiconducting gas sensing characterization, a new research field of self-powered gas sensing has been proposed. Recent works have shown promising concept to realize NG-based self-powered gas sensors that are capable of detecting gas environment without the need of external power sources to activate the gas sensors or to actively generate a readout signal. Compared with conventional sensors, these self-powered gas sensors keep the approximate performance. Meanwhile, these sensors drastically reduce power consumption and additionally reduce the required space for integration, which are significantly suitable for the wearable devices. This paper gives a brief summary about the establishment and latest progress in the fundamental principle, updated progress and potential applications of NG-based self-powered gas sensing system. The development trend in this field is envisaged, and the basic configurations are also introduced.

Spectroscopic Investigation of Plasma-Fluorinated Monolayer Graphene and Application for Gas Sensing.

Large-area monolayer fluorinated graphene (FG) is synthesized by a controllable SF6 plasma treatment. The functional groups of FG are elucidated by various spectroscopies, including Raman spectroscopy, X-ray photoemission spectroscopy (XPS), and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. Raman results suggest that the defects are introduced into the monolayer graphene during the fluorination process. The fluorine content can be varied by the plasma treatment and can reach the maximum (∼24.6 atom % F) under 20 s of plasma treatment as examined by XPS measurement. The angle-dependent NEXAFS results reveal that the fluorine atoms interact with the graphene matrix to form covalent C-F bonds, which are perpendicular to the basal plane of FG. FG is applied as a gas-sensing material and owns much better performance for ammonia detection compared to pristine graphene. On the basis of our density functional theory simulation results, the fast response/recovery behavior and high sensitivity of the FG gas sensor are attributed to enhanced physical absorption due to the C-F covalent bonds on the surface of FG.

A uniform porous multilayer-junction thin film for enhanced gas-sensing performance.

Highly-uniform In2O3/CuO bilayer and multilayer porous thin films were successfully fabricated using a self-assembled soft template and a simple sputtering deposition technique. The sensor based on the In2O3/CuO bilayer porous thin film shows obviously improved sensing performance to ethanol at a lower working temperature, compared to its single layer counterpart sensors. The response of the In2O3/CuO bilayer sensors exhibit nearly 3 and 5 times higher performance than those of the single layer In2O3 and CuO porous film sensors over the same ethanol concentration, respectively. The sensing mechanism based on the p-n hetero-junction, which contributed to the enhanced sensing performance, was also experimentally confirmed by a control experiment in which an SiO2 insulation layer was inserted between the In2O3 and CuO layers to break the p-n junction. In addition, the sensing performance can be further enhanced by increasing the number of In2O3/CuO junction layers. The facile process can be easily extended to the fabrication of other semiconductor oxide gas sensors for practical sensing applications.

Probing the Interfacial Interaction in Layered-Carbon-Stabilized Iron Oxide Nanostructures: A Soft X-ray Spectroscopic Study.

We have stabilized the iron oxide nanoparticles (NPs) of various sizes on layered carbon materials (Fe-oxide/C) that show excellent catalytic performance. From the characterization of X-ray absorption spectroscopy (XAS), X-ray emission spectroscopy (XES), scanning transmission X-ray microscopy (STXM) and X-ray magnetic circular dichroism spectroscopy (XMCD), a strong interfacial interaction in the Fe-oxide/C hybrids has been observed between the small iron oxide NPs and layered carbon in contrast to the weak interaction in the large iron oxide NPs. The interfacial interaction between the NPs and layered carbon is found to link with the improved catalytic performance. In addition, the Fe L-edge XMCD spectra show that the large iron oxide NPs are mainly γ-Fe2O3 with a strong ferromagnetic property, whereas the small iron oxide NPs with strong interfacial interaction are mainly α-Fe2O3 or amorphous Fe2O3 with a nonmagnetic property. The results strongly suggest that the interfacial interaction plays a key role for the catalytic performance, and the experimental findings may provide guidance toward rational design of high-performance catalysts.