Soil pollution indices and health risk assessment of metal(loid)s in the agricultural soil of pistachio orchards.

Elevated levels of metal(loid)s in soil may pose potential threats to the ecosystem and can be harmful for human health. The concentrations of As, Cd, Pb, Cr and Ni were determined in agricultural soil collected from 45 pistachio orchards around Feizabad city, Khorasan Razavi province, Iran using ICP-OES. Also, soil pollution indices including contamination factor (CF), pollution load index (PLI) and geo-accumulation index (Igeo) were evaluated. In addition, non-carcinogenic and carcinogenic risk indices were estimated. The mean concentrations of metal(loid)s were in the order of Ni = 466.256 > Cr = 120.848 > Pb = 12.009 > As = 5.486 > Cd = 0.394 mg/kg. Concentrations of As, Cd and Pb in the soil samples were within their respective permissible limits set by World Health Organization (WHO). But concentrations of Cr and Ni in 84.4 and 100% of the samples, respectively exceeded the WHO allowable limits. The CF, PLI and Igeo showed that soil of some of the pistachio orchards was contaminated with some metals. The possible sources of the metals in the soil are application of pesticides, chemical fertilizers, manures as well as irrigation water. Hazard quotient (HQ) ad Hazard index (HI) values from soil of all the orchards were found to be well below the respective threshold limit (1), suggesting that there is no immediate non-cancer threat arising from the contamination at all the orchards with metal(loid)s for children and adults. The highest cancer risk values (1.13E-02 for children and 1.25E-03 for adults) were estimated for Ni in the soil. Collectively, this study provides valuable information to improve the soil in the pistachio orchards to reduce metal(loid)s contamination and minimize the associated health risks to the population in the area.

Health risk assessment of heavy metal toxicity in the aquatic environment of the Persian Gulf.

This study aims to explore the potential health risks linked to four heavy metals/metalloids (Pb, Cd, As, Hg) present in four commercially important fish species (Scombromorus commerson, Pseudorhombus elevatus, Thunnus tonggol and Otolithes ruber) in the Persian Gulf. Metals in fish muscle tissue were analyzed via ICP-MS. The analysis revealed that Scombromorus commerson (except for Pb) and Thunnus tonggol (except for As) exhibited the highest and lowest contamination levels, respectively. The Hazard Index findings highlighted arsenic and mercury as the most hazardous elements. However, the Target Hazard Quotient values for each metal and fish species remained within safe thresholds. The highest and lowest Total Carcinogenic Risk was concerning Pseudorhombus elevates (As: 7.41-E05), and Thunnus thonggol (Pb: 3.21-E07), respectively. TCR analysis suggests that the cancer risk of studied metals was below the negligible level (TCR < 10-6) or within the acceptable level (10-6 < TCR < 10-4), potentially not posing carcinogenic risks through extended consumption.

Ecological risk assessment of trace elements (TEs) pollution and human health risk exposure in agricultural soils used for saffron cultivation.

Contamination of farmland soils by trace elements (TEs) has become an international issue concerning food safety and human health risks. In the present research, the concentrations of TEs including cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), manganese (Mn), nickel (Ni), lead (Pb), zinc (Zn) and iron (Fe) in soils of 16 farmlands were determined in Gonabad, Iran. In addition, the human health risks due to exposure to the TEs from the soils were assessed. Moreover, the soil contamination likelihood was evaluated based on various contamination indices including contamination factor [Formula: see text]), enrichment factor (EF), geo-accumulation index (Igeo), and pollution load index (PLI) calculations. The soil mean concentrations for Cd, Co, Cr, Cu, Mn, Ni, Pb, Zn and Fe ranges as 0.102, 6.968, 22.550, 29.263, 475.281, 34.234, 13.617, 54.482 and 19,683.6 mg/kg in farmland soils. The mean concentrations of the TEs decreased in the order of Fe > Mn > Zn > Ni > Cu > Cr > Pb > Co > As > Cd. Levels of all metals in this study were within the FAO/WHO and Iranian soil standards. The HQ values from investigated elements for adults and children in the studied farms were less than the limit of 1, indicating no health risks for the studied subpopulations. The results of the present research indicated no significant carcinogenic health hazards for both adults and children through ingestion, skin contact and inhalation exposure routes. [Formula: see text] values of Ni and Zn in 100% and 6.25% of farmlands were above 1, showing moderate contamination conditions. EF values of metals in farmlands were recorded as "no enrichment", "minimal enrichment" and "moderate enrichment" classes. Furthermore, it can be concluded that the all farms were uncontaminated except Ni (moderately contaminated) based on Igeo. This is an indication that the selected TEs in the agricultural soils have no appreciable threat to human health.

Capability of copper-nickel ferrite nanoparticles loaded onto multi-walled carbon nanotubes to degrade acid blue 113 dye in the sonophotocatalytic treatment process.

In this study, copper-nickel ferrite (CuNiFe2O4) nanoparticles were successfully loaded onto multi-walled carbon nanotubes (MWCNTs) by using the coprecipitation method and used as new catalysts (MWCNT-CuNiFe2O4) in the sonophotocatalytic degradation process of the acid blue 113 (AB113) dye. The success of the MWCNT-CuNiFe2O4 synthesis and its properties were determined by analyzing it using field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). A high efficiency of dye removal (100%), total organic carbon (93%), and chemical oxygen demand (95%) were achieved with the following conditions: pH of dye solution = 5, MWCNT-CuNiFe2O4 dosage = 0.6 g/L, AB113 dye concentration = 50 mg/L, UV light intensity = 36 W, ultrasonic wave frequency = 35 kHz, and treatment time = 30 min. The kinetic results revealed that the efficiency of the sonophotocatalytic process using MWCNT-CuNiFe2O4 was higher than that of the sonolysis, photolysis, photocatalysis, and sonocatalysis processes. Scavenging studies demonstrated that the holes (h+) and hydroxyl radical (•OH) were the main reactive species for the AB113 dye degradation. The stability and recyclability of MWCNT-CuNiFe2O4 were confirmed with eight consecutive cycles for a maximum efficiency of more than 92%. The high rate of BOD5/COD indicated that the sonophotocatalytic process had the potential to degrade the dye into degradable compounds. The toxicity study with an Escherichia coli growth inhibition rate emphasized that MWCNT-CuNiFe2O4 in the sonophotocatalytic degradation process of the AB113 dye had a significant effect on reducing toxicity, when compared to processes of photolysis and photocatalysis. During the sonophotocatalytic process using MWCNT-CuNiFe2O4, the AB113 dye was mineralized into CO2, H2O, NH4+, NO3-, and SO42-. The results of the present study proved that the MWCNT-CuNiFe2O4-based sonophotocatalytic process was a promising dye degradation technology to protect the aquatic environment.

Exposure to heavy metal contamination and probabilistic health risk assessment using Monte Carlo simulation: a study in the Southeast Iran.

The rice contamination to heavy metals and its associated health risks have been less addressed in the southeast of Iran. In the present study, in the mentioned region, we assessed the concentration of nine elements in rice, and the health risk related to the measured elements was determined using the data which were gathered by a questionnaire. For this purpose, 36 samples of the 12 most widely consumed rice brands were collected. Using ICP-MS, the concentrations of Ni, Cr, Hg, Sr, Mn, Fe, Se, Ba, and Zn were measured in the studied samples as 0.599 ± 0.124, 0.483 ± 0.28, 0.0157 ± 0.005, 0.85 ± 1.307, 11.5 ± 1.97, 178.46 ± 67.27, 0.212 ± 0.083, 0.845 ± 0.62, and 8.416 ± 1.611 mg/kg, respectively. We found that, regarding the other studies, the levels of Ni, Cr, Hg, Fe, and Ba were higher. Besides, using 258 distributed questionnaires among citizens, the daily rice consumption was determined to be 295.66 ± 171.005 g/person/ day. Based on this consumption rate and Monto Carlo uncertainty simulation, Fe (0.741 ± 0.54 mg/kg/day) and Se (8.95E-04 ± 6.33E-04 mg/kg/day) showed the highest and lowest daily intake, respectively. Also, using Hazard Quotient (HQ), the non-carcinogenic risk effects of the surveyed elements were estimated. The obtained results of HQ revealed that Fe (2.48) and Mn (1.06) could pose non-carcinogenic health risks to consumers. Moreover, the calculated hazard Index showed that the overall health risk of the surveyed elements is in an unsafe range.

Assessment of Heavy Metal Pollution and Human Health Risks Assessment in Soils Around an Industrial Zone in Neyshabur, Iran.

Heavy metal pollution of soils in industrial zones continues to attract attention because of its potential human health risks. The present research is an attempt to assess the pollution status of heavy metals including As, Cd, Cr, Ni, and Pb using various indices like contamination factor (CF), pollution index (IPOLL), and geo-accumulation index (Igeo). In total, 60 surface soil samples were collected from four area (north, south, east, and west) in Khayyam industrial zone from depths of 10-20 cm. The results indicated that average metal concentration ranges (in mg/kg) observed in study soils were 8.84, 1.9, 37.66, 15.77, and 57.33 for As, Cd, Cr, Ni, and Pb, respectively. The concentrations of heavy metals As, Cr, Ni, and Pb with the exception of Cd in soils of southern areas of the industrial zone were higher. Cd concentration vary negligibly in sampling sites of north, south, east, and west. Based on the CF, IPOLL, and Igeo indices, the pollution of soil in regard to concentration of heavy metals was in the following order: Cd > As > Pb > Ni > Zn. Industrial activities have therefore resulted in elevated concentrations of so in the soil environments in the Khayyam industrial zone. Based on the results of human health risk assessments, the soil metals pose negligible carcinogenic and non-carcinogenic risks to the adults and children living in this area. The need for the monitoring of the soil around the industrial zone, especially for Cd and As, is needed to reduce potential environmental issues.

Ecological and health risk assessment of exposure to atmospheric heavy metals.

In the present study, we assessed the concentration of airborne HMs (Zn, Cu, Pb, and Cd) and their probable sources using the bark of Pinus eldarica as a bio-indicator. Hence, 47 tree bark samples were harvested according to the land uses and biomonitoring techniques in the city of Yazd, Iran. The potential health risks in 13 age groups, ecological risk, as well as the possible relationship between HM concentrations and traffic indicators, were evaluated. The order of average HM concentrations in the P. eldarica bark samples was as Zn > Pb > Cu > Cd. The mean values of non-carcinogenic risks of all HMs in entire age groups were within secure range (HQ < 1); however, the carcinogenic risk of Cd was higher than the allowed level (TCR > 1 × 10-6). About Pb, it was in the safe level. The main element causing potential ecological risks was Cd, indicating moderate to very high ecological risk in most of the study areas. There was an inverse significant association between distance from major roads and Pb concentration (ß = -0.011 95% confidence interval (CI): 0.022, -0.0001). All HMs in bark samples render the negative Moran's index, representing a random spatial distribution pattern. Besides, according to principal component analysis (PCA), the first component accounted for 36.55% of the total variance, dominated by Cd, Pb, Cu, and Zn, respectively, and characterized by vehicle and industrial emissions. Our results infer that industrial activities and traffic are the main sources of HMs pollution in urban environments that should be considered by decision-makers.

Concentration and Prevalence of Aflatoxin M1 in Human Breast Milk in Iran: Systematic Review, Meta-Analysis, and Carcinogenic Risk Assessment: A Review.

This meta-analysis was designed to review the published reports regarding the concentration and/or prevalence of aflatoxin M1 (AFM1) in human breast milk in Iran. The carcinogenic risk for Iranian infants consuming this milk was estimated with the hazard index. The PubMed and Scopus databases and the Scientific Information Database were screened for relevant studies between 1995 and 2017, and 11 of the 112 collected studies were included in the systematic review and meta-analysis. The mean (95% confidence interval) concentration of AFM1 was 5.85 ng/L (4.54 to 7.15 ng/L), which was lower than the European Union standard (25 ng/L). The mean prevalence of AFM1 in breast milk in Iran was 42% (11 to 77%). The estimated daily intakes for male and female infants were 0.02 to 5.57 ng/kg and 0.02 to 3.68 ng/kg of body weight per day, respectively. The rank order of estimated daily intake for both male and female infants according to age was 1 week > 1 month > 6 months > 12 months. The hazard index for all age groups of infants in all provinces in Iran was less than 1. Therefore, infants in Iran were not considered at carcinogenic risk from AFM1 in human breast milk.

Probabilistic risk assessment of occupational exposure to volatile organic compounds in the rendering plant of a poultry slaughterhouse.

In this study, occupational exposure to volatile organic compounds (VOCs) in the rendering plant of poultry slaughterhouse was determined and subsequently, carcinogen and non-carcinogenic risks were assessed using the US Environmental Protection Agency (USEPA). National Institute for Occupational Safety and Health (NIOSH) methods of 1501 and 1600 were used to measure VOCs in the breathing zone of the workers. Samples were analyzed by GC/MS. Carcinogenic and non-carcinogenic risks and sensitivity analysis were carried out using Monte Carlo simulations technique. The concentration of benzene and CS2 was higher than the occupational exposure limits (OEL). The hazard quotient (HQ) values for all measured compounds was more than 1, which indicating the high potential for non-carcinogenic risks. Furthermore, the calculated Lifetime Cancer Risks (LCR) for carcinogenic compounds revealed that cancer risk due to benzene is higher than the maximum acceptable level provided by USEPA (10-6). Based on the sensitivity analysis, the concentration and exposure frequency are the most important variable influencing both carcinogen and non-carcinogenic risks. Therefore, the concentration levels of the VOCs and exposure frequency should be controlled using engineering control measures.

The Concentration of BTEX in the Air of Tehran: A Systematic Review-Meta Analysis and Risk Assessment.

In the current study, the concentration of some pollutants which are categorized as volatile organic compounds (VOCs), including benzene (B), toluene (T), ethylbenzene (E), and o-xylenes (o-X), in the air of Tehran was evaluated by the aid of a systematic review and meta-analysis approach. Also, the health risk for the exposed population was estimated using the recommended methods by the Environmental Protection Agency (EPA). The rank order based on their concentration in BTEX was benzene (149.18 µg/m³: 31%) > o-xylene (127.16 µg/m³: 27%) > ethylbenzene (110.15 µg/m³: 23%) > toluene (87.97 µg/m³: 19%). The ratio B/T in this study was calculated as 1.69, repressing that both stationary and mobile sources of emission can be considered as the main sources for benzene and toluene. Moreover, strong photochemical activity in Tehran was demonstrated by the high ratio of E/o-X. Meta-regression indicates that the concentration of BTEX has insignificantly (p-value > 0.05) increased over time. The BTEX compounds based on the target hazard quotient (THQ) were ordered as benzene > o-xylene > ethylbenzene > toluene. Percentile 95% of THQ due to benzene (4.973) and o-xylene (1.272) was higher than a value of 1. Percentile 95% excessive cancer risk (ECR) for benzene (1.25 × 106) and ethylbenzene (1.11 × 106) was higher than a value of 1.00 × 106. The health risk assessment indicated that the population of Tehran are at considerable non-carcinogenic and carcinogenic risks.

Metal concentrations in fillet and gill of parrotfish (Scarus ghobban) from the Persian Gulf and implications for human health.

Despite the benefits of seafood's consumption, the bioaccumulation of metals in fish can endanger consumers' health. This study analyzed lead (Pb), mercury (Hg), Arsenic (As), and Cadmium (Cd) concentrations in fillet and gill of parrotfish (Scarus ghobban) using flame atomic adsorption spectroscopy (FAAS). The potential non-carcinogenic and carcinogenic health risks due to consumption of Scarus ghobban fillet were assessed by estimating average target hazard quotient (THQ) and total target hazard quotient (TTHQ) and Incremental Lifetime Cancer Risk cancer risk (ILCR) of the analyzed metals. This study indicated that Cd, Pb, As and Hg concentrations were significantly (p < 0.05) lower than Food and Agriculture Organization (FAO) and national standard limits. The meal concentrations (µg/kg dry weight) in both fillet and gill were ranked as follows Pb > Cd > As > Hg. THQ and TTHQ were lower than 1 for adults and children, indicating that consumers were not at considerable non-carcinogenic risk. However, ILCR value for As was greater than 10-4, indicating that consumers are at carcinogenic risk. Overall, this research highlighted that although the consumption of parrotfish from the Persian Gulf does not pose non-carcinogenic health risks, carcinogenic risks derived from toxic As can be detrimental for local consumers.

Stochastic exposure and health risk assessment of rice contamination to the heavy metals in the market of Iranshahr, Iran.

An investigation of some heavy metals content in rice (Oryza sativa) and associated health risks was carried out for residents of Iranshahr city, Iran. Average daily rice consumption of the citizens and most widely used rice brands in the market of Iranshahr were determined using a questionnaire. Besides, the concentration of heavy metals in the gathered rice samples was measured by inductively coupled plasma mass spectrometry (ICP-MS). Monte Carlo uncertainty simulation was utilized in conducting exposure assessment and investigating the non-carcinogenic effects of the studied elements as well as the carcinogenic effect of As. Concentrations of As, Cd, Pb, Cu, Al, and Mo were 0.369 ±â€¯0.094, 0.0337 ±â€¯0.039, 0.123 ±â€¯0.14, 3.095 ±â€¯439.42, 39.6 ±â€¯14.73, and 1.106 ±â€¯0.133 mg kg-1, respectively. Al (0.18 ±â€¯0.15 mg kg-1 d-1) and Cd (0.00015 ±â€¯0.00034 mg kg-1 d-1) were the highest and lowest estimated daily intake, respectively. Except As (5.23 ±â€¯4.01), the calculated hazard quotient for investigated elements showed no non-carcinogenic health risk. Besides, the simulation of the carcinogenic risk effect for As (2.37E-3) revealed that the ingestion of the studied rice brands would cause cancer risk due to lifetime consumption. Results show that consumption of rice in the Iranshahr city is a potential source of exposure to the studied elements.

Spatial variation and probabilistic risk assessment of exposure to fluoride in drinking water.

Assessing the health risks of exposure to fluoride in developing countries has been unclear. In this study, the concentration of fluoride and its spatial analysis in groundwater of 6 counties of Yazd province, Iran, were investigated. Health risk assessment of three age groups (children, teens and adults), sensitivity analysis and uncertainties of effective variables were carried out using Monte Carlo simulation. The results showed that 68.77% of the samples taken were within the standard range set by the WHO guidelines (0.5-1.5 mg/l). The mean (Standard division) of fluoride in Ardakan, Azezar, Mehriz, Meybod, Taft and Yazd were 0.83 (0.31), 0.73 (0.41), 0.56 (0.20), 0.91 (0.32), 0.60 (0.32) and 0.64 (0.25) respectively. Among the studied counties, Ashkezar has the highest dispersion in terms of high concentration of fluoride. The hazard quotient (HQ) value for all age groups except children was less than 1, indicated potential of non-cancer risk of exposure to fluoride for this group. The most important variable in calculating the HQ was the drinking water ingestion rate, concentration of fluoride and the fraction of skin in contact with water, so more focused on these parameters should be made for a more accurate health risk assessment.

Health risk assessment of heavy metal intake due to fish consumption in the Sistan region, Iran.

The heavy metal (Pb, Cd, Cr, and Ni) content of a fish species consumed by the Sistan population and its associated health risk factors were investigated. The mean concentrations of Pb, Cd, and Cr were slightly higher than the standard levels. The Ni content of fish was below the maximum guideline proposed by the US Food and Drug Administration (USFDA). The average estimated weekly intake was significantly below the provisional tolerable intake based on the FAO and WHO standards for all studied metals. The target hazard quotients (THQ) of all metals were below 1, showing an absence of health hazard for the population of Sistan. The combined target hazard quotient for the considered metals was 26.94 × 10-3. The cancer risk factor for Pb (1.57 × 10-7) was below the acceptable lifetime carcinogenic risk (10-5). The results of this study reveal an almost safe level of Pb, Cd, Cr, and Ni contents in the fish consumed by the Sistan population. Graphical abstract ᅟ.

Kinetic and isotherm modeling of Cd (II) adsorption by L-cysteine functionalized multi-walled carbon nanotubes as adsorbent.

In this study, multi-walled carbon nanotubes were functionalized by L-cysteine to show the kinetic and isotherm modeling of Cd (II) ions onto L-cysteine functionalized multi-walled carbon nanotubes. The adsorption behavior of Cd (II) ion was studied by varying parameters including dose of L-MWCNTs, contact time, and cadmium concentration. Equilibrium adsorption isotherms and kinetics were also investigated based on Cd (II) adsorption tests. The results showed that an increase in contact time and adsorbent dosage resulted in increase of the adsorption rate. The optimum condition of the Cd (II) removal process was found at pH=7.0, 15 mg/L L-MWCNTs dosage, 6 mg/L cadmium concentration, and contact time of 60 min. The removal percent was equal to 89.56 at optimum condition. Langmuir and Freundlich models were employed to analyze the experimental data. The data showed well fitting with the Langmuir model (R2=0.994) with q max of 43.47 mg/g. Analyzing the kinetic data by the pseudo-first-order and pseudo-second-order equations revealed that the adsorption of cadmium using L-MWSNTs following the pseudo-second-order kinetic model with correlation coefficients (R2) equals to 0.998, 0.992, and 0.998 for 3, 6, and 9 mg/L Cd (II) concentrations, respectively. The experimental data fitted very well with the pseudo-second-order. Overall, treatment of polluted solution to Cd (II) by adsorption process using L-MWCNT can be considered as an effective technology.