Delayed Orbital Floor Reconstruction Using Mirroring Technique and Patient-Specific Implants: Proof of Concept.

Enophthalmos is a severe complication of primary reconstruction following orbital floor fractures, oncological resections, or maxillo-facial syndromes. The goal of secondary orbital reconstruction is to regain a symmetrical globe position to restore function and aesthetics. In this article, we present a method of computer-assisted orbital floor reconstruction using a mirroring technique and a custom-made titanium or high-density polyethylene mesh printed using computer-aided manufacturing techniques. This reconstructive protocol involves four steps: mirroring of the healthy orbit computer tomography files at the contralateral affected site, virtual design of a customized implant, computer-assisted manufacturing (CAM) of the implant using Direct Metal Laser Sintering (DMLS) or Computer Numerical Control (CNC) methods, and surgical insertion of the device. Clinical outcomes were assessed using 3dMD photogrammetry and computed tomography measures in 13 treated patients and compared to a control group treated with stock implants. An improvement of 3.04 mm (range 0.3-6 mm) in globe protrusion was obtained for the patients treated with patient-specific implants (PSI), and no major complications have been registered. The technique described here appears to be a viable method for correcting complex orbital floor defects needing delayed reconstruction.

Direct healthcare costs of oral cancer: A retrospective study from a tertiary care center.

The aim of this study was to retrospectively evaluate the direct costs of OSCC treatment and postsurgical surveillance in a tertiary hospital in northeast Italy. Sixty-three consecutive patients surgically treated for primitive OSCC at S. Orsola Hospital in Bologna (Italy) between January 2018 and January 2020 were analyzed. Billing records of the Emilia Romagna healthcare system and institutional costs were used to derive specific costs for the following clinical categories: operating theatre costs, intensive and ordinary hospitalization, radiotherapy, chemotherapy, postsurgical complications, visits, and examinations during the follow-up period. The study population comprised 17 OSCC patients classified at stage I, 14 at stage II, eight at stage III, and 24 at stage IV. The estimated mean total direct cost for OSCC treatment and postsurgical surveillance was €26 338.48 per patient (stage I: €10 733, stage II: €19 642.9, stage III: €30 361.4, stage IV: €39 957.2). An advanced diagnosis (stages III and IV), complex surgical procedure, and loco-regional recurrences resulted in variables that were significantly associated with a higher cost of OSCC treatment and postsurgical surveillance. Redirection of funds used for OSCC treatment to screening measures may be an effective strategy to improve overall health outcomes and optimize national health resources.

Dissecting human anatomy learning process through anatomical education with augmented reality: AEducAR 2.0, an updated interdisciplinary study.

Anatomical education is pivotal for medical students, and innovative technologies like augmented reality (AR) are transforming the field. This study aimed to enhance the interactive features of the AEducAR prototype, an AR tool developed by the University of Bologna, and explore its impact on human anatomy learning process in 130 second-year medical students at the International School of Medicine and Surgery of the University of Bologna. An interdisciplinary team of anatomists, maxillofacial surgeons, biomedical engineers, and educational scientists collaborated to ensure a comprehensive understanding of the study's objectives. Students used the updated version of AEducAR, named AEducAR 2.0, to study three anatomical topics, specifically the orbit zone, facial bones, and mimic muscles. AEducAR 2.0 offered two learning activities: one explorative and one interactive. Following each activity, students took a test to assess learning outcomes. Students also completed an anonymous questionnaire to provide background information and offer their perceptions of the activity. Additionally, 10 students participated in interviews for further insights. The results demonstrated that AEducAR 2.0 effectively facilitated learning and students' engagement. Students totalized high scores in both quizzes and declared to have appreciated the interactive features that were implemented. Moreover, interviews shed light on the interesting topic of blended learning. In particular, the present study suggests that incorporating AR into medical education alongside traditional methods might prove advantageous for students' academic and future professional endeavors. In this light, this study contributes to the growing research emphasizing the potential role of AR in shaping the future of medical education.

Morpho-functional analysis of the temporomandibular joint following mandible-first bimaxillary surgery with mandible-only patient-specific implants.

The aim of this study was to evaluate condylar and glenoid fossa remodeling after bimaxillary orthognathic surgery guided by patient-specific mandibular implants. In total, 18 patients suffering from dentofacial dysmorphism underwent a virtually planned bimaxillary mandibular PSI-guided orthognathic procedure. One month prior to surgery, patients underwent a CBCT scan and optical scans of the dental arches; these datasets were re-acquired 1 month and at least 9 months postsurgery. Three-dimensional models of the condyles, glenoid fossae, and interarticular surface space (IASS) were obtained and compared to evaluate the roto-translational positional discrepancy and surface variation of each condyle and glenoid fossa, and the IASS variation. The condylar position varied by an average of 4.31° and 2.18 mm, mainly due to surgically unavoidable ramus position correction. Condylar resorption remodeling was minimal (average ≤ 0.1 mm), and affected skeletal class III patients the most. Later condylar remodeling was positively correlated with patient age. No significant glenoid fossa remodeling was observed. No postoperative orofacial pain was recorded at clinical follow-up. The procedure was accurate in minimizing the shift in relationship between the bony components of the TMJ and their remodeling, and was effective in avoiding postoperative onset of orofacial pain. An increase in sample size, however, would be useful to confirm our findings.

Thirteen-gene DNA methylation analysis of oral brushing samples: A potential surveillance tool for periodic monitoring of treated patients with oral cancer.

BACKGROUND: We evaluated the prognostic role of 13-gene DNA methylation analysis by oral brushing repeatedly performed during the follow-up of patients surgically treated for oral cancer. METHODS: This is a nested case-control study including 61 patients for a total of 64 outcomes (2/61 patients experienced multiple relapses). Samples were collected at baseline (4-10 months after OSCC resection) and repeatedly every 4-10 months until relapse or death. DNA methylation scores were classified as persistently positive, persistently negative, or mixed. RESULTS: Twenty cases who had persistently positive scores and 30 cases with mixed scores had, respectively, an almost 42-fold (p < 0.001) and 32-fold (p = 0.006) higher likelihood of relapse, compared to 14 patients with persistently negative scores. The last score before reoccurrence was positive in 18/19 secondary events. CONCLUSIONS: The 13-gene DNA methylation analysis may be considered for the surveillance of patients treated for oral carcinoma.

Pre-operative incisional biopsy of oral squamous cell carcinoma: high podoplanin expression is related to perineural invasion and may be a useful predictor of disease progression.

OBJECTIVE: Immunohistochemical analysis of podoplanin expression as a pre-operative molecular marker for perineural invasion (PNI) may represent an attractive strategy for surgical management of oral squamous cell cancer (OSCC). We evaluated the relationship between podoplanin expression and PNI in pre-operative incisional biopsies of OSCC. STUDY DESIGN: After performing pathological staging and histologic and immunohistochemical evaluation of 83 surgical specimens, we performed multivariable logistic regression analysis to examine the relationship between PNI and independent variables. To evaluate the utility of podoplanin immunopositivity for discrimination of PNI status pre-operatively, we calculated the sensitivity, specificity, positive predictive value, and negative predictive value. We performed receiver operating characteristic curve analysis to evaluate the diagnostic accuracy of podoplanin immunopositivity for predicting PNI alone and in combination with age, T stage, N stage, and index site. RESULTS: We observed podoplanin expression in 42 (50.6%) of all the 83 pre-operative incisional biopsies and 29 of the pre-operative biopsies of the 31 (93.5%) postoperative specimens with PNI. The rate of podoplanin expression was significantly higher in patients with pT3 to pT4 stage and pN+ stage disease. Podoplanin positivity in the pre-operative biopsy showed high sensitivity in predicting PNI in the surgical specimen. CONCLUSION: Podoplanin expression appears to be an independent pre-operative variable significantly related to PNI and a possibly valuable prognostic marker for therapeutical planning and surgical treatment of OSCC.

Augmented reality for orthopedic and maxillofacial oncological surgery: a systematic review focusing on both clinical and technical aspects.

This systematic review offers an overview on clinical and technical aspects of augmented reality (AR) applications in orthopedic and maxillofacial oncological surgery. The review also provides a summary of the included articles with objectives and major findings for both specialties. The search was conducted on PubMed/Medline and Scopus databases and returned on 31 May 2023. All articles of the last 10 years found by keywords augmented reality, mixed reality, maxillofacial oncology and orthopedic oncology were considered in this study. For orthopedic oncology, a total of 93 articles were found and only 9 articles were selected following the defined inclusion criteria. These articles were subclassified further based on study type, AR display type, registration/tracking modality and involved anatomical region. Similarly, out of 958 articles on maxillofacial oncology, 27 articles were selected for this review and categorized further in the same manner. The main outcomes reported for both specialties are related to registration error (i.e., how the virtual objects displayed in AR appear in the wrong position relative to the real environment) and surgical accuracy (i.e., resection error) obtained under AR navigation. However, meta-analysis on these outcomes was not possible due to data heterogenicity. Despite having certain limitations related to the still immature technology, we believe that AR is a viable tool to be used in oncological surgeries of orthopedic and maxillofacial field, especially if it is integrated with an external navigation system to improve accuracy. It is emphasized further to conduct more research and pre-clinical testing before the wide adoption of AR in clinical settings.

Pretreatment Tumor Volume and Tumor Sphericity as Prognostic Factors in Patients with Oral Cavity Squamous Cell Carcinoma: A Prospective Clinical Study in 95 Patients.

The prognostic impact of tumor volume and tumor sphericity was analyzed in 95 patients affected by oral cancer. The pre-operative computed tomography (CT) scans were used to segment the tumor mass with threshold tools, obtaining the corresponding volume and sphericity. Events of recurrence and tumor-related death were detected for each patient. The mean follow-up time was 31 months. A p-value of 0.05 was adopted. Mean tumor volume resulted higher in patients with recurrence or tumor-related death at the Student's t-test (respectively, 19.8 cm3 vs. 11.1 cm3, p = 0.03; 23.3 cm3 vs. 11.7 cm3, p = 0.02). Mean tumor sphericity was higher in disease-free patients (0.65 vs. 0.59, p = 0.04). Recurrence-free survival and disease-specific survival were greater for patients with a tumor volume inferior to the cut-off values of 21.1 cm3 (72 vs. 21 months, p < 0.01) and 22.4 cm3 (85 vs. 32 months, p < 0.01). Recurrence-free survival and disease-specific survival were higher for patients with a tumor sphericity superior to the cut-off value of 0.57 (respectively, 49 vs. 33 months, p < 0.01; 56 vs. 51 months, p = 0.01). To conclude, tumor volume and sphericity, three-dimensional parameters, could add useful information for better stratification of prognosis in oral cancer.

Preclinical Application of Augmented Reality in Pediatric Craniofacial Surgery: An Accuracy Study.

BACKGROUND: Augmented reality (AR) allows the overlapping and integration of virtual information with the real environment. The camera of the AR device reads the object and integrates the virtual data. It has been widely applied to medical and surgical sciences in recent years and has the potential to enhance intraoperative navigation. MATERIALS AND METHODS: In this study, the authors aim to assess the accuracy of AR guidance when using the commercial HoloLens 2 head-mounted display (HMD) in pediatric craniofacial surgery. The Authors selected fronto-orbital remodeling (FOR) as the procedure to test (specifically, frontal osteotomy and nasal osteotomy were considered). Six people (three surgeons and three engineers) were recruited to perform the osteotomies on a 3D printed stereolithographic model under the guidance of AR. By means of calibrated CAD/CAM cutting guides with different grooves, the authors measured the accuracy of the osteotomies that were performed. We tested accuracy levels of ±1.5 mm, ±1 mm, and ±0.5 mm. RESULTS: With the HoloLens 2, the majority of the individuals involved were able to successfully trace the trajectories of the frontal and nasal osteotomies with an accuracy level of ±1.5 mm. Additionally, 80% were able to achieve an accuracy level of ±1 mm when performing a nasal osteotomy, and 52% were able to achieve an accuracy level of ±1 mm when performing a frontal osteotomy, while 61% were able to achieve an accuracy level of ±0.5 mm when performing a nasal osteotomy, and 33% were able to achieve an accuracy level of ±0.5 mm when performing a frontal osteotomy. CONCLUSIONS: despite this being an in vitro study, the authors reported encouraging results for the prospective use of AR on actual patients.

Accuracy Evaluation of an Alternative Approach for a CAD-AM Mandibular Reconstruction with a Fibular Free Flap via a Novel Hybrid Roto-Translational and Surface Comparison Analysis.

Although the fibula free flap represents the gold standard for mandibular reconstructions, when implanted as a single barrel, this flap does not have the cross-sectional requisites to restore the native mandibular height, which is in turn required for the implant-supported dental rehabilitation of the patient. Our team has developed a design workflow that already considers the predicted dental rehabilitation, positioning the fibular free flap in the correct craniocaudal position to restore the native alveolar crest. The remaining height gap along the inferior mandibular margin is then filled by a patient-specific implant. The aim of this study is to evaluate the accuracy in transferring the planned mandibular anatomy resulting from said workflow on 10 patients by means of a new rigid body analysis method, derived from the evaluation of orthognathic surgery procedures. The analysis method has proved to be reliable and reproducible, and the results obtained show that the procedure already has satisfactory accuracy (4.6° mean total angular discrepancy, 2.7 mm total translational discrepancy, 1.04 mm mean neo-alveolar crest surface deviation), while also pointing out possible improvements to the virtual planning workflow.

Shared epigenetic alterations between oral cancer and periodontitis: A preliminary study.

INTRODUCTION: We recently developed a non-invasive sampling procedure for oral squamous cell carcinoma (OSCC) detection based on DNA methylation analysis of a panel of 13 genes. Oral cancer, as well as acute and chronic inflammatory diseases, may influence the methylation level of several genes in the oral cavity. In the present study, we evaluated the presence of periodontal disease (PD) and the methylation status using our 13-gene panel. METHODS: Oral brushing specimens were collected from three different patient groups: 23 gingival OSCC patients, 15 patients affected by PD, and 15 healthy volunteers lacking evidence of PD. DNA methylation analysis was performed and each sample was determined to be positive or negative based on a predefined cut-off value. RESULTS: Positive results were found for 23/23 OSCC patients, 3/15 PD patients, and 0/15 samples from healthy volunteers. The GP1BB and MIR193 genes in the PD group exhibited mean methylation levels similar to OSCC patients. ZAP70 showed different methylation levels among three groups. CONCLUSION: Preliminary data identified shared epigenetic alterations between PD and OSCC patients in two inflammatory genes (GP1BB and MIR193). This study may help to identify potential links between the two diseases and serve as a starting point for the future research focused on pathogenesis.

Application of Augmented Reality to Maxillary Resections: A Three-Dimensional Approach to Maxillofacial Oncologic Surgery.

In the relevant global context, although virtual reality, augmented reality, and mixed reality have been emerging methodologies for several years, only now have technological and scientific advances made them suitable for revolutionizing clinical care and medical settings through the provision of advanced features and improved healthcare services. Over the past fifteen years, tools and applications using augmented reality (AR) have been designed and tested in the context of various surgical and medical disciplines, including maxillofacial surgery. The purpose of this paper is to show how a marker-less AR guidance system using the Microsoft® HoloLens 2 can be applied in mandible and maxillary demolition surgery to guide maxillary osteotomies. We describe three mandibular and maxillary oncologic resections performed during 2021 using AR support. In these three patients, we applied a marker-less tracking method based on recognition of the patient's facial profile. The surgeon, using HoloLens 2 smart glasses, could see the virtual surgical planning superimposed on the patient's anatomy. We showed that performing osteotomies under AR guidance is feasible and viable, as demonstrated by comparison with osteotomies performed using CAD-CAM cutting guides. This technology has advantages and disadvantages. However, further research is needed to improve the stability and robustness of the marker-less tracking method applied to patient face recognition.

A 13-Gene DNA Methylation Analysis Using Oral Brushing Specimens as an Indicator of Oral Cancer Risk: A Descriptive Case Report.

Analysis of genetic or epigenetic markers from saliva or brushing specimens has been proposed as a diagnostic aid to identify patients at risk of developing oral cancer. However, no reliable non-invasive molecular method for this purpose is commercially available. In the present report, we describe the potential application of a procedure based on a 13-gene DNA methylation analysis using oral brushing samples from a patient affected by oral leukoplakia who developed two metachronous oral carcinomas during the follow-up period. A positive or a negative score was calculated for each brushing sample based on a predefined cut-off value. In this patient, a positive score was detected in the oral leukoplakia diagnosed more than 2 years before the development of oral squamous cell carcinoma and subsequently in clinically healthy mucosa 8 months before the appearance of a secondary tumor. This suggests a potential role of our procedure as an indicator of oral cancer risk.

Craniofacial Osteomas: From Diagnosis to Therapy.

An osteoma is a benign bone lesion with no clear pathogenesis, almost exclusive to the craniofacial area. Osteomas show very slow continuous growth, even in adulthood, unlike other bony lesions. Since these lesions are frequently asymptomatic, the diagnosis is usually made by plain radiography or by a computed tomography (CT) scan performed for other reasons. Rarely, the extensive growth could determine aesthetic or functional problems that vary according to different locations. Radiographically, osteomas appear as radiopaque lesions similar to bone cortex, and may determine bone expansion. Cone beam CT is the optimal imaging modality for assessing the relationship between osteomas and adjacent structures, and for surgical planning. The differential diagnosis includes several inflammatory and tumoral pathologies, but the typical craniofacial location may aid in the diagnosis. Due to the benign nature of osteomas, surgical treatment is limited to symptomatic lesions. Radical surgical resection is the gold standard therapy; it is based on a minimally invasive surgical approach with the aim of achieving an optimal cosmetic result. Reconstructive surgery for an osteoma is quite infrequent and reserved for patients with large central osteomas, such as big mandibular or maxillary lesions. In this regard, computer-assisted surgery guarantees better outcomes, providing the possibility of preoperative simulation of demolitive and reconstructive surgery.

Mandibular reconstruction using a new design for a patient-specific plate to support a fibular free flap and avoid double-barrel technique.

Mandibular reconstruction is a primary concern for head and neck reconstructive surgeons because of the aesthetic restoration needs after ablative surgery, as well as for functional reasons: the mandible has a central functional role in speaking, swallowing and mastication. It is generally agreed that the gold standard for mandibular reconstruction is a bone free flap supported by a reconstructive titanium plate. The fibular flap represents the first choice for multi-segment mandibular reconstruction. The fibula, harvested as a single barrel graft, does not exhibit sufficient thickness to reach the original height of the native mandible; therefore, the positioning of dental implants is often deeper than that of the native alveolar crest. The aim of this study was to evaluate the positioning of the fibular free flap as it pertains to the restoration of vertical mandible height, by modifying the design of a 3D-printed titanium patient-specific implant (PSI). In this novel reconstructive workflow, the customised plate was projected to support the fibular flap at an alveolar bone position above the typical inferior mandibular border, and carried out on four patients. All patients were treated for benign neoplasms involving mandibular bone. Clinical outcomes and accuracy of the procedure are described. Our reconstructive proposal appears to be a valid alternative to the double-barrel technique in order to restore the vertical height of the reconstructed mandible.^ieng

La ricostruzione mandibolare è particolarmente rilevante per il chirurgo cervico-cefalico, in quanto influenza significativamente i successi in termini di risultati estetici e funzionali per il paziente. Il gold standard per tale ricostruzione è l'utilizzo di lembi ossei rivascolarizzati, stabilizzati mediante una placca ricostruttiva in titanio. Il lembo di fibula rappresenta la prima scelta ricostruttiva laddove necessitino molteplici segmenti ossei. Tuttavia questo lembo, allestito secondo la tecnica della singola barra, non permette di ripristinare l'altezza mandibolare nativa, adeguata per una corretta riabilitazione masticatoria implanto-supportata. Lo scopo di questo studio è quindi presentare un nuovo design di placca ricostruttiva custom-made, atta a posizionare il segmento osseo di fibula in una posizione più coronale, evitando pertanto la necessità di allestire il lembo secondo la tecnica della doppia barra. La placca custom-made contribuisce inoltre al mantenimento del profilo mandibolare, garantendo il ripristino morfologico della ricostruzione. Questo protocollo è stato eseguito su quattro pazienti sottoposti a resezione mandibolare per tumori benigni. I risultati clinici e di accuratezza della procedura sono presentati. Il protocollo presentato sembra una valida alternativa alla tecnica della doppia barra al fine di ripristinare l'altezza mandibolare nativa.

Prognostic role of pre-treatment magnetic resonance imaging (MRI)-based radiomic analysis in effectively cured head and neck squamous cell carcinoma (HNSCC) patients.

OBJECTIVES: To identify and validate baseline magnetic resonance imaging (b-MRI) radiomic features (RFs) as predictors of disease outcomes in effectively cured head and neck squamous cell carcinoma (HNSCC) patients. MATERIALS AND METHODS: Training set (TS) and validation set (VS) were retrieved from preexisting datasets (HETeCo and BD2Decide trials, respectively). Only patients with both pre- and post-contrast enhancement T1 and T2-weighted b-MRI and at least 2 years of follow-up (FUP) were selected. The combination of the best extracted RFs was used to classify low risk (LR) vs. high risk (HR) of disease recurrence. Sensitivity, specificity, and area under the curve (AUC) of the radiomic model were computed on both TS and VS. Overall survival (OS) and 5-year disease-free survival (DFS) Kaplan-Meier (KM) curves were compared for LR vs. HR. The radiomic-based risk class was used in a multivariate Cox model, including well-established clinical prognostic factors (TNM, sub-site, human papillomavirus [HPV]). RESULTS: In total, 57 patients of TS and 137 of VS were included. Three RFs were selected for the signature. Sensitivity of recurrence risk classifier was 0.82 and 0.77, specificity 0.78 and 0.81, AUC 0.83 and 0.78 for TS and VS, respectively. VS KM curves for LR vs. HR groups significantly differed both for 5-year DFS (p<.0001) and OS (p=.0004). A combined model of RFs plus TNM improved prognostic performance as compared to TNM alone, both for VS 5-year DFS (C-index: 0.76 vs. 0.60) and OS (C-index: 0.74 vs. 0.64). CONCLUSIONS: Radiomics of b-MRI can help to predict recurrence and survival outcomes in HNSCC.

Clinical validation of 13-gene DNA methylation analysis in oral brushing samples for detection of oral carcinoma: Italian multicenter study.

BACKGROUND: The aim of this Italian multicenter study was to evaluate the diagnostic performance of a minimally invasive method for the detection of oral squamous cell carcinoma (OSCC) based on 13-gene DNA methylation analysis in oral brushing samples. METHODS: Oral brushing specimens were collected in 11 oral medicine centers across Italy. Twenty brushing specimens were collected by each center, 10 from patients with OSCC, and 10 from healthy volunteers. DNA methylation analysis was performed in blindness, and each sample was determined as positive or negative based on a predefined cutoff value. RESULTS: DNA amplification failed in 4 of 220 (1.8%) samples. Of the specimens derived from patients with OSCC, 93.6% (103/110) were detected as positive, and 84.9% (90/106) of the samples from healthy volunteers were negative. CONCLUSION: These data confirmed the diagnostic performance of our novel procedure in a large cohort of brushing specimens collected from 11 different centers and analyzed in blindness.

Augmented Reality to Assist Skin Paddle Harvesting in Osteomyocutaneous Fibular Flap Reconstructive Surgery: A Pilot Evaluation on a 3D-Printed Leg Phantom.

BACKGROUND: Augmented Reality (AR) represents an evolution of navigation-assisted surgery, providing surgeons with a virtual aid contextually merged with the real surgical field. We recently reported a case series of AR-assisted fibular flap harvesting for mandibular reconstruction. However, the registration accuracy between the real and the virtual content needs to be systematically evaluated before widely promoting this tool in clinical practice. In this paper, after description of the AR based protocol implemented for both tablet and HoloLens 2 smart glasses, we evaluated in a first test session the achievable registration accuracy with the two display solutions, and in a second test session the success rate in executing the AR-guided skin paddle incision task on a 3D printed leg phantom. METHODS: From a real computed tomography dataset, 3D virtual models of a human leg, including fibula, arteries and skin with planned paddle profile for harvesting, were obtained. All virtual models were imported into Unity software to develop a marker-less AR application suitable to be used both via tablet and via HoloLens 2 headset. The registration accuracy for both solutions was verified on a 3D printed leg phantom obtained from the virtual models, by repeatedly applying the tracking function and computing pose deviations between the AR-projected virtual skin paddle profile and the real one transferred to the phantom via a CAD/CAM cutting guide. The success rate in completing the AR-guided task of skin paddle harvesting was evaluated using CAD/CAM templates positioned on the phantom model surface. RESULTS: On average, the marker-less AR protocol showed comparable registration errors (ranging within 1-5 mm) for tablet-based and HoloLens-based solution. Registration accuracy seems to be quite sensitive to ambient light conditions. We found a good success rate in completing the AR-guided task within an error margin of 4 mm (97% and 100% for tablet and HoloLens, respectively). All subjects reported greater usability and ergonomics for HoloLens 2 solution. CONCLUSIONS: Results revealed that the proposed marker-less AR based protocol may guarantee a registration error within 1-5 mm for assisting skin paddle harvesting in the clinical setting. Optimal lightening conditions and further improvement of marker-less tracking technologies have the potential to increase the efficiency and precision of this AR-assisted reconstructive surgery.

Congenital fibrous hamartoma of the tip of the tongue: A novel peculiar entity.

Congenital fibrous hamartoma of the tip of the tongue, a peculiar and novel entity, consists of one or two asymptomatic pearly or yellowish nodules, not exceeding 0.5 cm in maximum diameter, at the tip of the tongue, ventrally or dorsally. Unlike other localizations, congenital fibrous hamartoma of the tip of the tongue is not associated with cleft lip or palate, or with feeding problems. Surgical excision should be avoided, reserved only for dubious cases, since the lesions are benign and stable over time.

Osteosarcoma of the Jaws: A Literature Review.

Osteosarcoma of the jaws (OSJ) is a relatively rare disease, accounting for between 2% and 10% of all cases of osteosarcoma. It is morphologically and radiologically identical to the trunk and extremity variant, but distinct in several crucial aspects. The lesion is characterized by sarcomatous cells which produce a variable amount of osteoid bone. It arises centrally within the bone and can be subdivided into osteoblastic, chondroblastic and fibroblastic subtype, depending on the predominant cell type. Radiographically, these tumors display a spectrum of bone changes from well-demarcated borders to lytic bone destruction with indefinite margins and variable cortical bone erosion or, in some cases, images of sclerotic bone. Therapeutic options for OSJ include surgery, chemotherapy and radiotherapy, which are employed according to age of the patient, histological classification and localization of the tumor. Today, there is no general consensus in the treatment guidelines for the OSJ though surgery represents the key to the treatment. The main prognostic factor deeply influencing the patient's prognosis remains the complete tumor resection with negative surgical margins. The aim of the present review is to describe state of the art regarding diagnostic and surgical treatment aspects of the primary osteosarcoma of the jaws.