RESUMO
Targeting and treating intracellular pathogen infections has been long-standing challenge, particularly in light of the escalating prevalence of antimicrobial resistance. Herein, an optimum formulation of alginate (AL)-coated niosome-based carriers for delivery of herbal extract Gingerol (Gin) was developed to treat intracellular pathogen infections and cancer cells. We used Gin-Nio@AL as a model drug to assess its efficacy against Gram-negative/positive bacteria and breast cancer cell lines. Our investigation affirmed its heightened antibacterial and anticancer properties. The antibacterial activity of Gin-Nio@AL against intracellular Staphylococcus aureus (S. aureus) and pseudomonas aeruginosa (P. aeruginosa) was also tested. In the current study, the niosome nanoparticles containing herbal extract Gingerol were optimized regarding lipid content and Surfactant per Cholesterol molar ratio. The developed formulation provided potential advantages, such as smooth globular surface morphology, small diameter (240.68 nm), pH-sensitive sustained release, and high entrapment efficiency (94.85 %). The release rate of Gin from AL-coated niosomes (Gin-Nio@AL) in physiological and acidic pH is lower than uncoated nanoparticles (Gin-Nio). Besides, the release rate of Gin from niosomal formulations increased in acidic pH. The Gin-Nio@AL demonstrated good antimicrobial activity against S. aureus and P. aeruginosa, and compared to Gin-Nio, the MIC values decreased to 7.82 ± 0.00 and 1.95 ± 0.00 µg/mL, respectively. In addition, the time-kill assay results showed that the developed formulation significantly reduced the number of bacteria in both strains compared to other tested groups. The microtiter data and scanning electron microscope micrography showed that Gin-Nio@AL has a more significant inhibitory effect on biofilm formation than Gin-Nio and Gin. The cell cytotoxicity evaluation showed that Gin-Nio@AL reduced the survival rate of MDA-MB-231 cancer cells to 52.4 % and 45.2 % after 48 h and 72 h, respectively. The elimination of intracellular pathogens was investigated through a breast cancer cell infection in an in vitro model. Gin-Nio@AL exhibited an enhanced and sustained intracellular antibacterial activity against pathogens-infected breast cancer cells compared to other tested formulations. Overall, Gin-Nio@AL enables the triggered release and targeting of intra-extra cellular bacteria and cancer cells and provides a novel and promising candidate for treating intracellular pathogen infections and cancer cells.
Assuntos
Neoplasias da Mama , Catecóis , Álcoois Graxos , Nanopartículas , Humanos , Feminino , Lipossomos/química , Alginatos/farmacologia , Staphylococcus aureus , Antibacterianos/farmacologia , Nanopartículas/químicaRESUMO
Combination therapy has been considered one of the most promising approaches for improving the therapeutic effects of anticancer drugs. This is the first study that uses two different antioxidants in full-characterized niosomal formulation and thoroughly evaluates their synergistic effects on breast cancer cells. In this study, in-silico studies of hydrophilic and hydrophobic drugs (ascorbic acid: Asc and curcumin: Cur) interactions and release were investigated and validated by a set of in vitro experiments to reveal the significant improvement in breast cancer therapy using a co-delivery approach by niosomal nanocarrier. The niosomal nanoparticles containing surfactants (Span 60 and Tween 60) and cholesterol at 2:1 M ratio were prepared through the film hydration method. A systematic evaluation of nanoniosomes was carried out. The release profile demonstrated two phases (initial burst followed by sustained release) and a pH-dependent release schedule over 72 h. The optimized niosomal preparation displayed superior storage stability for up to 2 months at 4 °C, exhibiting extremely minor changes in pharmaceutical encapsulation efficiency and size. Free dual drugs (Asc + Cur) and dual-drug loaded niosomes (Niosomal (Asc + Cur)) enhanced the apoptotic activity and cytotoxicity and inhibited cell migration which confirmed the synergistic effect of co-encapsulated drugs. Also, significant up-regulation of p53 and Bax genes was observed in cells treated with Asc + Cur and Niosomal (Asc + Cur), while the anti-apoptotic Bcl-2 gene was down-regulated. These results were in correlation with the increase in the enzyme activity of SOD, CAT, and caspase, and the levels of malondialdehyde (MDA) and reactive oxygen species (ROS) upon treatment with the mentioned drugs. Furthermore, these anti-cancer effects were higher when using Niosomal (Asc + Cur) than Asc + Cur. Histopathological examination also revealed that Niosomal (Asc + Cur) had a lower mitosis index, invasion, and pleomorphism than Asc + Cur. These findings indicated that niosomal formulation for co-delivery of Asc and Cur would offer a promising delivery system for an effective breast cancer treatment.
Assuntos
Antineoplásicos , Neoplasias da Mama , Curcumina , Humanos , Feminino , Neoplasias da Mama/tratamento farmacológico , Antineoplásicos/farmacologia , Antineoplásicos/química , Antineoplásicos/uso terapêutico , Lipossomos/química , Lipossomos/farmacologia , Lipossomos/uso terapêutico , Curcumina/farmacologia , Curcumina/química , Polissorbatos/química , Polissorbatos/uso terapêuticoRESUMO
Despite many efforts, breast cancer remains one of the deadliest cancers and its treatment faces challenges related to cancer drug side effects and metastasis. Combining 3D printing and nanocarriers has created new opportunities in cancer treatment. In this work, 3D-printed gelatin-alginate nanocomposites containing doxorubicin-loaded niosomes (Nio-DOX@GT-AL) were recruited as an advanced potential pH-sensitive drug delivery system. Morphology, degradation, drug release, flow cytometry, cell cytotoxicity, cell migration, caspase activity, and gene expression of nanocomposites and controls (Nio-DOX and Free-DOX) were evaluated. Results show that the obtained niosome has a spherical shape and size of 60-80 nm. Sustained drug release and biodegradability were presented by Nio-DOX@GT-AL and Nio-DOX. Cytotoxicity analysis revealed that the engineered Nio-DOX@GT-AL scaffold had 90 % cytotoxicity against breast cancer cells (MCF-7), whereas exhibited <5 % cytotoxicity against the non-tumor breast cell line (MCF-10A), which was significantly more than the antitumor effect of the control samples. Scratch-assay as an indicator cell migration demonstrated a reduction of almost 60 % of the covered surface. Gene expression could provide an explanation for the antitumor effect of engineered nanocarriers, which significantly reduced metastasis-promoting genes (Bcl2, MMP-2, and MMP-9), and significantly enhanced the expression and activity of genes that promote apoptosis (CASP-3, CASP-8, and CASP-9). Also, considerable inhibition of metastasis-associated genes (Bax and p53) was observed. Moreover, flow-cytometry data demonstrated that Nio-DOX@GT-AL decreased necrosis and enhanced apoptosis drastically. The findings of this research can confirm that employing 3D-printing and niosomal formulation can be an effective strategy in designing novel nanocarriers for efficient drug delivery applications.
Assuntos
Neoplasias da Mama , Nanopartículas , Humanos , Feminino , Lipossomos/uso terapêutico , Gelatina , Alginatos/uso terapêutico , Doxorrubicina/farmacologia , Doxorrubicina/uso terapêutico , Sistemas de Liberação de Medicamentos , Neoplasias da Mama/patologia , Concentração de Íons de Hidrogênio , Células MCF-7 , Portadores de Fármacos/uso terapêutico , Liberação Controlada de FármacosRESUMO
Breast cancer is one of the most lethal cancers, especially in women. Despite many efforts, side effects of anti-cancer drugs and metastasis are still the main challenges in breast cancer treatment. Recently, advanced technologies such as 3D-printing and nanotechnology have created new horizons in cancer treatment. In this work, we report an advanced drug delivery system based on 3D-printed gelatin-alginate scaffolds containing paclitaxel-loaded niosomes (Nio-PTX@GT-AL). The morphology, drug release, degradation, cellular uptake, flow cytometry, cell cytotoxicity, migration, gene expression, and caspase activity of scaffolds, and control samples (Nio-PTX, and Free-PTX) were investigated. Results demonstrated that synthesized niosomes had spherical-like, in the range of 60-80 nm with desirable cellular uptake. Nio-PTX@GT-AL and Nio-PTX had a sustained drug release and were biodegradable. Cytotoxicity studies revealed that the designed Nio-PTX@GT-AL scaffold had <5 % cytotoxicity against non-tumorigenic breast cell line (MCF-10A) but showed 80 % cytotoxicity against breast cancer cells (MCF-7), which was considerably more than the anti-cancer effects of control samples. In migration evaluation (scratch-assay), approximately 70 % reduction of covered surface area was observed. The anticancer effect of the designed nanocarrier could be attributed to gene expression regulation, where a significant increase in the expression and activity of genes promoting apoptosis (CASP-3, CASP-8, and CASP-9) and inhibiting metastasis (Bax, and p53) and a remarkable decrease in metastasis-enhancing genes (Bcl2, MMP-2, and MMP-9) were observed. Also, flow cytometry results declared that Nio-PTX@GT-AL reduced necrosis and increased apoptosis considerably. The results of this study prove that employing 3D-printing and niosomal formulation is an effective approach in designing nanocarriers for efficient drug delivery applications.
Assuntos
Neoplasias da Mama , Paclitaxel , Feminino , Humanos , Paclitaxel/farmacologia , Lipossomos/uso terapêutico , Gelatina , Alginatos/uso terapêutico , Células MCF-7 , Neoplasias da Mama/tratamento farmacológico , Neoplasias da Mama/patologia , Impressão Tridimensional , Linhagem Celular TumoralRESUMO
Cells and their derived extracellular vesicles (EVs) or exosomes contain unique molecular signatures that could be used as biomarkers for the detection of severe diseases such as cancer, as well as monitoring the treatment response. Revealing these molecular signatures requires developing non-invasive ultrasensitive tools to enable single molecule/cell-level detection using a small volume of sample with low signal-to-noise ratio background and multiplex capability. Surface-enhanced Raman scattering (SERS) can address the current limitations in studying cells and EVs through two main mechanisms: plasmon-enhanced electric field (the so-called electromagnetic mechanism (EM)), and chemical mechanism (CM). In this review, we first highlight these two SERS mechanisms and then discuss the nanomaterials that have been used to develop SERS biosensors based on each of the aforementioned mechanisms as well as the combination of these two mechanisms in order to take advantage of the synergic effect between electromagnetic enhancement and chemical enhancement. Then, we review the recent advances in designing label-aided and label-free SERS biosensors in both colloidal and planar systems to investigate the surface biomarkers on cancer cells and their derived EVs. Finally, we discuss perspectives of emerging SERS biosensors in future biomedical applications. We believe this review article will thus appeal to researchers in the field of nanobiotechnology including material sciences, biosensors, and biomedical fields.
Assuntos
Técnicas Biossensoriais , Vesículas Extracelulares , Nanoestruturas , Análise Espectral Raman , Nanoestruturas/química , BiomarcadoresRESUMO
The great promise of photodynamic therapy (PDT) has thrusted the rapid progress of developing highly effective photosensitizers (PS) in killing cancerous cells and bacteria. To mitigate the intrinsic limitations of the classical molecular photosensitizers, researchers have been looking into designing new generation of nanomaterial-based photosensitizers (nano-photosensitizers) with better photostability and higher singlet oxygen generation (SOG) efficiency, and ways of enhancing the performance of existing photosensitizers. In this paper, we review the recent development of nano-photosensitizers and nanoplasmonic strategies to enhance the SOG efficiency for better PDT performance. Firstly, we explain the mechanism of reactive oxygen species generation by classical photosensitizers, followed by a brief discussion on the commercially available photosensitizers and their limitations in PDT. We then introduce three types of new generation nano-photosensitizers that can effectively produce singlet oxygen molecules under visible light illumination, i.e., aggregation-induced emission nanodots, metal nanoclusters (< 2 nm), and carbon dots. Different design approaches to synthesize these nano-photosensitizers were also discussed. To further enhance the SOG rate of nano-photosensitizers, plasmonic strategies on using different types of metal nanoparticles in both colloidal and planar metal-PS systems are reviewed. The key parameters that determine the metal-enhanced SOG (ME-SOG) efficiency and their underlined enhancement mechanism are discussed. Lastly, we highlight the future prospects of these nanoengineering strategies, and discuss how the future development in nanobiotechnology and theoretical simulation could accelerate the design of new photosensitizers and ME-SOG systems for highly effective image-guided photodynamic therapy.
RESUMO
In the present study, a magnetic niosomal nanocarrier for co-delivery of curcumin and letrozole into breast cancer cells has been designed. The magnetic NiCoFe2O4 core was coated by a thin layer of silica, followed by a niosomal structure, allowing us to load letrozole and curcumin into the silica layer and niosomal layer, respectively, and investigate their synergic effects on breast cancer cells. Furthermore, the nanocarriers demonstrated a pH-dependent release due to the niosomal structure at their outer layer, which is a promising behavior for cancer treatment. Additionally, cellular assays revealed that the nanocarriers had low cellular uptake in the case of non-tumorigenic cells (i.e., MCF-10A) and related high viability but high cellular uptake in cancer cell lines (i.e., MDA-MB-231 and SK-BR-3) and related low viability, which is evidenced in their high cytotoxicity against different breast cancer cell lines. The cytotoxicity of the letrozole/curcumin co-loaded nanocarrier is higher than that of the aqueous solutions of both drugs, indicating their enhanced cellular uptake in their encapsulated states. In particular, NiCoFe2O4@L-Silica-L@C-Niosome showed the highest cytotoxicity effects on MDA-MB-231 and SK-BR-3 breast cancer cells. The observed cytotoxicity was due to regulation of the expression levels of the studied genes in breast cancer cells, where downregulation was observed for the Bcl-2, MMP 2, MMP 9, cyclin D, and cyclin E genes while upregulation of the expression of the Bax, caspase-3, and caspase-9 genes was observed. The flow cytometry results also revealed that NiCoFe2O4@L-Silica-L@C-Niosome enhanced the apoptosis rate in both MDA-MB-231 and SK-BR-3 cells compared to the control samples. The findings of our research show the potential of designing magnetic niosomal formulations for simultaneous targeted delivery of both hydrophobic and hydrophilic drugs into cancer cells in order to enhance their synergic chemotherapeutic effects. These results could open new avenues into the future of nanomedicine and the development of theranostic agents.
Assuntos
Protocolos de Quimioterapia Combinada Antineoplásica , Neoplasias da Mama/tratamento farmacológico , Campos Magnéticos , Protocolos de Quimioterapia Combinada Antineoplásica/química , Protocolos de Quimioterapia Combinada Antineoplásica/farmacocinética , Protocolos de Quimioterapia Combinada Antineoplásica/farmacologia , Neoplasias da Mama/metabolismo , Neoplasias da Mama/patologia , Linhagem Celular Tumoral , Curcumina/química , Curcumina/farmacocinética , Curcumina/farmacologia , Feminino , Humanos , Letrozol/química , Letrozol/farmacocinética , Letrozol/farmacologia , Lipossomos , Nanopartículas de Magnetita/química , Nanopartículas de Magnetita/uso terapêutico , Proteínas de Neoplasias/metabolismoRESUMO
Synthesis of value added products from wastes is of importance from different perspectives. Wood and paper industry produces tons of wastewaters that contains lignin. In this paper, we report a new approach, called solvent-shifting method, to synthesize lignin sulfonate nanoparticles (LS-NPs). The effective parameters on size of LS-NPs were carefully tuned and the size of LS-NPs was minimized by response surface methodology. The results suggested that LS-NPs with size of 53 nm can be synthesized at low lignin sulfonate concentration (0.28 g/mL), moderate surfactant concentration (0.32 g/mL) but relatively high anti-solvent content (92 mL of ethanol for 40 mL of the aqueous phase). The as-synthesized LS-NPs were characterized by different analytical techniques, where presence of various negatively charged functional groups on surface of LS-NPs was conformed. To investigate the potential of LS-NPs for adsorptive removal of pollutant molecules, basic red 2 (known as Safranin-O) was used as a model pollutant dye. The results suggested that the maximum removal occurs at alkaline pH, where there is strong electrostatic interactions between LS-NPs and cationic Safranin-O molecules. The adsorption capacity was 85.14 mg/gr, where the isotherm data was best described by Redlich-Peterson isotherm model. The kinetic data also revealed that the adsorption is very fast in the first 20 min, where there is three diffusional steps to complete the adsorption in 90 min. The results of this study could open up new window to the field of value-added products to synthesize waste-driven nanomaterials for environmental applications.
Assuntos
Poluentes Ambientais , Nanopartículas , Poluentes Químicos da Água , Adsorção , Cinética , Lignina , Solventes , Poluentes Químicos da Água/análiseRESUMO
Dual-functional aggregation-induced photosensitizers (AIE-PSs) with singlet oxygen generation (SOG) ability and bright fluorescence in aggregated state have received much attention in image-guided photodynamic therapy (PDT). However, designing an AIE-PS with both high SOG and intense fluorescence via molecular design is still challenging. In this work, we report a new nanohybrid consisting of gold nanostar (AuNS) and AIE-PS dots with enhanced fluorescence and photosensitization for theranostic applications. The spectral overlap between the extinction of AuNS and fluorescence emission of AIE-PS dots (665 nm) is carefully selected using five different AuNSs with distinct localized surface plasmon (LSPR) peaks. Results show that all the AuNSs can enhance the 1O2 production of AIE-PS dots, among which the AuNS with LSPR peak at 585 nm exhibited the highest 1O2 enhancement factor of 15-fold with increased fluorescence brightness. To the best of our knowledge, this is the highest enhancement factor reported for the metal-enhanced singlet oxygen generation systems. The Au585@AIE-PS nanodots were applied for simultaneous fluorescence imaging and photodynamic ablation of HeLa cancer cells with strongly enhanced PDT efficiency in vitro. This study provides a better understanding of the metal-enhanced AIE-PS nanohybrid systems, opening up new avenue towards advanced image-guided PDT with greatly improved efficacy.
RESUMO
Visible-light driven photocatalysts are of great importance in wastewater treatment. In this work, fluorine and nitrogen co-doped titanium dioxide/silica nanocomposite (F-N-TiO2/SiO2) was synthetized using a sol-gel approach. The as-developed nanocomposite was well characterized using different techniques. In particular, an anatase structure with high surface area (345.69 m2/g) and a band gap of 2.97 eV were observed for the as-synthesized nanocomposite, which makes it a potential candidate for photocatalytic applications under visible light. A systematic density functional theory calculation was performed to get more insight into the effect of dopant atoms on the band gap of TiO2 nanoparticles. To enhance the reusability of the photocatalyst in semi-pilot scale, the as-developed nanocomposite was immobilized onto the glass beads by coupling dip-coating and heat attachment methods. A semi-pilot scale custom-designed fixed-bed photoreactor was used to evaluate the photocatalytic performance of the as-developed nanocomposite under both visible and solar irradiations. A mixture of three azo dyes (i.e., basic red 29, basic blue 41 and basic yellow 51) was used as the model industrial wastewater. The analysis of the wastewater showed that the complete removal of the pollutants under visible light and sunlight can occurred at pH of 3 and flow rate of 280 mL/min. The durability results demonstrated the successful degradation of the pollutants for five cycles. The results of this study show how careful controlling the operational parameters as well as using a highly photocatalytic nanomaterial can lead to successful decontamination of organic water pollutants. This approach might open up new windows to the future applications of photocatalytic nanomaterials for wastewater treatment.
Assuntos
Nanocompostos , Poluentes Químicos da Água , Poluentes da Água , Catálise , Teoria da Densidade Funcional , Luz , Fotólise , Dióxido de Silício , Titânio , Poluentes Químicos da Água/análiseRESUMO
In this study, polypyrrole/carboxymethyl cellulose nanocomposite particles (PPy/CMC NPs) were synthesized and applied for removal of reactive red 56 (RR56)and reactive blue 160 (RB160) as highly toxic dyes. The amount of CMC was found significantly effective on the surface adsorption efficiency. Different optimization methods including the genetic programming, response surface methodology, and artificial neural network (ANN) were used to optimize the effect of different parameters including pH, adsorption time, initial dye concentration and adsorbent dose. The maximum adsorption of RR56 and RB160 were found under the following optimum conditions: pH of 4 and 5, adsorption time of 55 min and 52 min for RR56 and RB160, respectively, initial dye concentration of 100 mg/L and adsorbent dose of 0.09 g for both dyes. were obtained for RR56 and RB160, respectively. Also, the results indicated that ANN method could predict the experimental adsorption data with higher accuracy than other methods. The analysis of ANN results indicated that the adsorbent dose is the main factor in RR56 removal, followed by time, pH and initial concentration, respectively. However, initial concentration mostly determines the RB160 removal process. The isotherm data for both dyes followed the Langmuir isotherm model with a maximum adsorption capacity of 104.9 mg/g and 120.7 mg/g for RR56 and RB160, respectively. In addition, thermodynamic studies indicated the endothermic adsorption process for both studied dyes. Moreover, DFT calculations were carried out to obtain more insight into the interactions between the dyes and adsorbent. The results showed that the hydrogen bondings and Van der Waals interactions are dominant forces between the two studied dyes and PPy/CMC composite. Furthermore, the interaction energies calculated by DFT confirmed the experimental adsorption data, where PPy/CMC resulted in higher removal of both dyes compared to PPy. The developed nanocomposite showed considerable reusability up to 3 cylces of the batch adsorption process.
Assuntos
Carboximetilcelulose Sódica/química , Corantes/química , Nanocompostos/química , Adsorção , Compostos Azo , Benzenossulfonatos , Teoria da Densidade Funcional , Cinética , Nanopartículas , Polímeros , Pirróis , Termodinâmica , Poluentes Químicos da ÁguaRESUMO
Developing new nanocarriers and understanding the interactions between the drug and host molecules in the nanocarrier at the molecular level is of importance for future of nanomedicine. In this work, we synthesized and characterized a series of iron oxide nanoparticles (IONPs) functionalized with different organic molecules (citric acid, α-cyclodextrin, and citric acid/α-cyclodextrin composite). It was found that incorporation of citric acid into the α-cyclodextrin had negligible effect on the adsorption efficiency (<5%) of citric acid/α-cyclodextrin functionalized IONPs, while the isotherm adsorption data were well described by the Langmuir isotherm model (qmax = 2.92 mg/g at T = 25 °C and pH = 7). In addition, the developed nanocarrier showed pH-responsive behavior for releasing the quercetin molecules as drug model, where the Korsmeyer-Peppas model could describe the release profile with Fickian diffusion (n < 0.45 for at all pH and temperatures). Then, Density functional theory was applied to calculate the absolute binding energies (ΔEb) of the complexation of quercetin with different host molecules in the developed nanocarriers. The calculated energies are as follow: 1) quercetin and citric acid: ΔEb = -16.58 kcal/mol, 2) quercetin and α-cyclodextrin: ΔEb = -46.98 kcal/mol, and 3) quercetin and citric acid/α-cyclodextrin composite: ΔEb = -40.15 kcal/mol. It was found that quercetin tends to interact with all hosts via formation of hydrogen bonds and van der Waals interactions. Finally, the cytotoxicity of the as-developed nanocarriers was evaluated using MTT assay and both normal NIH-3T3 and cancereous HeLa cells. The cell viability results showed that the quercetin could be delivered effectively to the HeLa cells due to the acidic environment inside the cells with minimum effect on the viability of NIH-3T3 cells. These results might open a new window to design of stimuli-responsive nanocarriers for drug delivery applications.
Assuntos
Ácido Cítrico , Portadores de Fármacos , Nanopartículas de Magnetita/química , Quercetina , alfa-Ciclodextrinas , Animais , Ácido Cítrico/química , Ácido Cítrico/farmacocinética , Ácido Cítrico/farmacologia , Portadores de Fármacos/química , Portadores de Fármacos/farmacocinética , Portadores de Fármacos/farmacologia , Células HeLa , Humanos , Camundongos , Células NIH 3T3 , Quercetina/química , Quercetina/farmacocinética , Quercetina/farmacologia , alfa-Ciclodextrinas/química , alfa-Ciclodextrinas/farmacocinética , alfa-Ciclodextrinas/farmacologiaRESUMO
In this study, optimized cephalexin-loaded niosomal formulations based on span 60 and tween 60 were prepared as a promising drug carrier system. The niosomal formulations were characterized using a series of techniques such as scanning electron microscopy, Fourier transformed infrared spectroscopy, dynamic light scattering, and zeta potential measurement. The size and drug encapsulation efficiency are determined by the type and composition of surfactant. The developed niosomal formulations showed great storage stability up to 30â¯days with low change in size and drug entrapment during the storage, making them potential candidates for real applications. Moreover, the prepared niosomes showed negligible cytotoxicity for HepG2 cells, measured by MTT assay. The antibacterial properties of cephalexin-loaded niosome were investigated using S. aureus and E. coli as gram-positive and gram-negative bacteria, respectively. The results showed that the encapsulation of antibiotic drug in niosomal formulation could enhance the antibacterial efficiency of the drug, where the minimum inhibitory concentration was droped from 8⯵g/mL (cephalexin) to 4⯵g/mL (cephalexin-loaded niosome) and from 4⯵g/mL (cephalexin) to 1⯵g/mL (cephalexin-loaded niosome) against E. coli and S. aureus, respectively. The findings of our study show that the improvement of cephalexin bioavailability and prolonged drug release profile could be obtained by niosomal formulation as a favorable antibiotic drug delivery system.
Assuntos
Antibacterianos/administração & dosagem , Cefalexina/administração & dosagem , Escherichia coli/efeitos dos fármacos , Staphylococcus aureus/efeitos dos fármacos , Antibacterianos/química , Sobrevivência Celular/efeitos dos fármacos , Cefalexina/química , Liberação Controlada de Fármacos , Estabilidade de Medicamentos , Escherichia coli/crescimento & desenvolvimento , Células Hep G2 , Humanos , Lipossomos , Staphylococcus aureus/crescimento & desenvolvimentoRESUMO
Circulating exosomes in body fluids are involved in many diseases and have important roles in pathophysiological processes. Specifically, they have emerged as a promising new class of biomarkers in cancer diagnosis and prognosis because of their high concentration and availability in a variety of biological fluids. The ability to quantitatively detect and characterize these nano-sized vesicles is crucial to make use of exosomes as a reliable biomarker for clinical applications. However, current methods are mostly technically challenging and time-consuming which prevents them from being adopted in clinical practice. In this work, we have developed a rapid sensitive platform for exosome detection and quantification by employing MoS2-multiwall carbon nanotubes as a fluorescence quenching material. This exosome biosensor shows a sensitive and selective biomarker detection. Using this MoS2-MWCNT based fluorometric nanosensor to analyze exosomes derived from MCF-7 breast cancer cells, we found that CD63 expression could be measured based on the retrieved fluorescence of the fluorophore with a good linear response range of 0-15% v/v. In addition, this nanosensing technique is able to quantify exosomes with different surface biomarker expressions and has revealed that exosomes secreted from MCF-7 breast cancer cells have a higher CD24 expression compared to CD63 and CD81.
RESUMO
An experimental study of bioethanol adsorption on natural Iranian clinoptilolite was carried out. Dynamic breakthrough curves were used to investigate the best adsorption conditions in bioethanol liquid phase. A laboratory setup was designed and fabricated for this purpose. In order to find the best operating conditions, the effect of liquid pressure, temperature and flow rate on breakthrough curves and consequently, maximum ethanol uptake by adsorbent were studied. The effects of different variables on final bioethanol concentration were investigated using Response Surface Methodology (RSM). The results showed that by working at optimum condition, feed with 96% (v/v) initial ethanol concentration could be purified up to 99.9% (v/v). In addition, the process was modeled using Box-Behnken model and optimum operational conditions to reach 99.9% for final ethanol concentration were found equal to 10.7 °C, 4.9 bar and 8 mL/min for liquid temperature, pressure and flow rate, respectively. Therefore, the selected natural Iranian clinoptilolite was found to be a promising adsorbent material for bioethanol dehydration process.