RESUMO
Developing effective amyloidosis inhibitors poses a significant challenge due to the dynamic nature of the protein structures, the complex interplay of interfaces in protein-protein interactions, and the irreversible nature of amyloid assembly. The interactions of amyloidogenic polypeptides with other peptides play a pivotal role in modulating amyloidosis and fibril formation. This study presents a novel approach for designing and synthesizing amyloid interaction surfaces using segments derived from the amyloid-promoting sequence of amyloid ß-peptide [VF(Aß(18-19)/FF(Aß(19-20)/LVF(Aß(17-19)/LVFF(Aß(17-20)], where VF, FF, LVF and LVFF stands for valine phenylalanine dipeptide, phenylalanine phenylalanine dipeptide, leucine valine phenylalanine tripeptide and leucine valine phenylalanine phenylalanine tetrapeptide, respectively. These segments are conjugated with side-chain proline-based methacrylate polymers serving as potent lysozyme amyloidosis inhibitors and demonstrating reduced cytotoxicity of amyloid aggregations. Di-, tri-, and tetra-peptide conjugated chain transfer agents (CTAs) were synthesized and used for the reversible addition-fragmentation chain transfer polymerization of tert-butoxycarbonyl (Boc)-proline methacryloyloxyethyl ester (Boc-Pro-HEMA). Deprotection of Boc-groups from the side-chain proline pendants resulted in water-soluble polymers with defined peptide chain ends as peptide-polymer bioconjugates. Among them, the LVFF-conjugated polymer acted as a potent inhibitor with significantly suppressed lysozyme amyloidosis, a finding supported by comprehensive spectroscopic, microscopic, and computational analyses. These results unveil the synergistic effect between the segment-derived amyloid ß-peptide and side-chain proline-based polymers, offering new prospects for targeting lysozyme amyloidosis.
Assuntos
Peptídeos beta-Amiloides , Amiloidose , Humanos , Peptídeos beta-Amiloides/química , Prolina , Leucina , Polímeros/química , Muramidase , Amiloidose/tratamento farmacológico , Amiloidose/metabolismo , Amiloide , Dipeptídeos/farmacologia , Fenilalanina , ValinaRESUMO
We report a novel method for the fabrication of polymeric Janus nanorods via sequential polymerization from anodic aluminum oxide (AAO) templates. Dual compositions can be incorporated into individual nanorods and endow versatile potential applications. This fabrication strategy paves the way for constructing multifunctional nanostructures and brings together different materials in a single entity.
RESUMO
Branched sulfonated polymers present considerable potential for application as proton exchange membranes, yet investigation of branched polymers containing sulfonated branched centers remains to be advanced. Herein, we report a series of polymers with ultradensely sulfonated branched centers, namely, B-x-SPAEKS, where x represents the degree of branching. In comparison with the analogous polymers bearing sulfonated branched arms, B-x-SPAEKS showed a reduced water affinity, resulting in less swelling and lower proton conductivity. The water uptake, swelling ratio (in-plane), and proton conductivity of B-10-SPAEKS at 80 °C were 52.2%, 57.7%, and 23.6% lower than their counterparts, respectively. However, further analysis revealed that B-x-SPAEKS featured significantly better proton conduction under the same water content due to the formation of larger hydrophilic clusters (â¼10 nm) that promoted efficient proton transportation. B-12.5-SPAEKS exhibited a proton conductivity of 138.8 mS cm-1 and a swelling ratio (in-plane) of only 11.6% at 80 °C, both of which were superior to Nafion 117. In addition, a decent single-cell performance of B-12.5-SPAEKS was also achieved. Consequently, the decoration of sulfonic acid groups on the branched centers represents a very promising strategy, enabling outstanding proton conductivity and dimensional stability simultaneously even with low water content.
RESUMO
Poly(ethylene oxide) block copolymers (PEOz BCP) have been demonstrated to exhibit remarkably high lithium ion (Li+) conductivity for Li+ batteries applications. For linear poly(isoprene)-b-poly(styrene)-b-poly(ethylene oxide) triblock copolymers (PIxPSyPEOz), a pronounced maximum ion conductivity was reported for short PEOz molecular weights around 2 kg mol-1. To later enable a systematic exploration of the influence of the PIx and PSy block lengths and related morphologies on the ion conductivity, a synthetic method is needed where the short PEOz block length can be kept constant, while the PIx and PSy block lengths could be systematically and independently varied. Here, we introduce a glycidyl ether route that allows covalent attachment of pre-synthesized glycidyl-end functionalized PEOz chains to terminate PIxPSy BCPs. The attachment proceeds to full conversion in a simplified and reproducible one-pot polymerization such that PIxPSyPEOz with narrow chain length distribution and a fixed PEOz block length of z = 1.9 kg mol-1 and a D = 1.03 are obtained. The successful quantitative end group modification of the PEOz block was verified by nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). We demonstrate further that with a controlled casting process, ordered microphases with macroscopic long-range directional order can be fabricated, as demonstrated by small-angle X-ray scattering (SAXS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It has already been shown in a patent, published by us, that BCPs from the synthesis method presented here exhibit comparable or even higher ionic conductivities than those previously published. Therefore, this PEOz BCP system is ideally suitable to relate BCP morphology, order and orientation to macroscopic Li+ conductivity in Li+ batteries.
RESUMO
Herein, we report the design of styrene-based poly(ethylene oxide) (PEO) side-chain block copolymers featuring a microphase separation and their application as solid polymer electrolytes in high-voltage lithium-metal batteries. A straightforward synthesis was established, overcoming typical drawbacks of PEO block copolymers prepared by anionic polymerization or ester-based PEO side-chain copolymers. Both the PEO side-chain length and the LiTFSI content were varied, and the underlying relationships were elucidated in view of polymer compositions with high ionic conductivity. Subsequently, a selected composition was subjected to further analyses, including phase-separated morphology, providing not only excellent self-standing films with intrinsic mechanical stability but also the ability to suppress lithium dendrite growth as well as good flexibility, wettability, and good contacts with the electrodes. Furthermore, good thermal and electrochemical stability was demonstrated. To do so, linear sweep and cyclic voltammetry, lithium plating/stripping tests, and galvanostatic overcharging using high-voltage cathodes were conducted, demonstrating stable lithium-metal interfaces and a high oxidative stability of around 4.75 V. Consequently, cycling of Li||NMC622 cells did not exhibit commonly observed rapid cell failure or voltage noise associated with PEO-based electrolytes in Li||NMC622 cells, attributed to the high mechanical stability. A comprehensive view is provided, highlighting that the combination of PEO and high-voltage cathodes is not impossible per se.
RESUMO
Living cationic polymerization is known for a good control over chain growth yielding polymers with well-defined molar mass distributions and low dispersities. However, the practical challenges involved in the synthesis of poly(vinyl ether)s limited suitable post-polymerization modifications (PPM) via chemoselective click reactions. Herein the successful controlled cationic polymerization of vinyl ethers bearing pendant CC double and C≡C triple bonds using a single-component initiation under ambient conditions is reported. Furthermore, the PPM via thiol-ene/-yne and copper(I)-catalyzed alkyne-azide cycloaddition reaction of the obtained polymers is successfully realized laying the foundation for the synthesis of unprecedented functional poly(vinyl ether)s.
Assuntos
Polímeros , Compostos de Vinila , Alcinos , PolimerizaçãoRESUMO
A carbon-dioxide-responsive organic-inorganic nanocomposite membrane based on a through-hole anodic aluminum oxide (AAO) template was constructed. The composite was prepared via a surface-initiated reversible addition-fragmentation chain-transfer (SI-RAFT) polymerization strategy to achieve the grafting of poly(methyl methacrylate-co-2-(diethylamino)ethyl methacrylate) brushes on the AAO membrane. The grafted polymer chain length could be controlled based on the feed ratio between the free chain transfer agent (CTA) and reactive monomer, e.g., methyl methacrylate and 2-(diethylamino)ethyl methacrylate, resulting in a membrane that features adjustable water permeability. Importantly, the membrane pore size and surface wettability could be switched from hydrophobic to hydrophilic upon the introduction of carbon dioxide and nitrogen gases. This allowed for the nanocomposite membrane to be utilized for controlled water flux and oil/water emulsion separation. The simple fabrication methodology as well as sustainable gaseous stimulus will be useful for the construction of future smart membranes.
RESUMO
Directional dipole-dipole interaction mediated antiparallel dimerization of merocyanine dye (MD) has been explored for maneuvering supramolecular assembly of MD-conjugated flexible macromolecules leading to a cross-linked nanogel. The MD-functionalized copolymer was synthesized by a newly developed organocatalytic transesterification strategy for postpolymerization functionalization of poly(pentafluorophenyl acrylate) (polyPFPA)-based reactive copolymer. Presence of â¼35% pendant MD attached to a coil-like polymer chain leads to spontaneous formation of highly emitting cross-linked nanogel with efficient container property and appreciable stability in toluene owing to strong dimerization propensity among the MD. Considering the significance of MD in the context of nonlinear optics and photovoltaics, these results not only enrich the toolbox for engineering macromolecular assembly, but also open up new possibilities for future organic materials.
RESUMO
In this paper, a template-assisted replication method is demonstrated for the fabrication of hierarchically branched polymeric nanostructures composed of post-modifiable poly(pentafluorophenyl acrylate). Anodic aluminum oxide templates with various shapes of hierarchically branched pores are fabricated by an asymmetric two-step anodization process. The hierarchical polymeric nanostructures are obtained by infiltration of pentafluorophenyl acrylate with a cross-linker and photoinitiator, followed by polymerization and selective removal of the template. Furthermore, the nanostructures containing reactive pentafluorophenyl ester are modified with spiropyran amine via post-polymerization modification to fabricate ultraviolet-responsive nanostructures. This method can be readily extended to other amines and offers a generalized strategy for controlling functionality and wettability of surfaces.
RESUMO
A unique fabrication process of low molar mass, crystalline polypeptoid fibers is described. Thermoresponsive fiber mats are prepared by electrospinning a homogeneous blend of semicrystalline poly(N-(n-propyl) glycine) (PPGly; 4.1 kDa) with high molar mass poly(ethylene oxide) (PEO). Annealing of these fibers at ≈100 °C selectively removes the PEO and produces stable crystalline fiber mats of pure PPGly, which are insoluble in aqueous solution but can be redissolved in methanol or ethanol. The formation of water-stable polypeptoid fiber mats is an important step toward their utilization in biomedical applications such as tissue engineering or wound dressing.
RESUMO
Temperature-triggered formation of nanostructures with distinct biological activity offers opportunities in selective modification of matrices and in drug delivery. Toward these ends, diblock polymers comprising poly(diethylene glycol methyl ether methacrylate) (PDEGMEMA) conjugated to a triple helix-forming collagen-like peptide were produced. Triggered by the collapse of the thermoresponsive domain above its LCST, the conjugate undergoes a reversible transition in aqueous solution to form well-defined nanovesicles with diameters of approximately 100 nm, with a transition temperature of 37 °C. The incorporation of CLP domains in these nanostructures may offer opportunities for the selective targeting of collagen-containing matrices.
Assuntos
Colágeno/química , Temperatura Alta , Substâncias Macromoleculares/síntese química , Nanoestruturas/química , Peptídeos/química , Polímeros/química , Vesículas Transportadoras/química , Acrilatos/química , Cromatografia em Gel , Dicroísmo Circular , Sistemas de Liberação de Medicamentos/métodos , Substâncias Macromoleculares/química , Espectroscopia de Ressonância Magnética , Microscopia Eletrônica de Transmissão , Nanomedicina/métodos , Nanomedicina/tendências , Polietilenoglicóis/químicaRESUMO
Peptide sequences, which exhibit a reversible pH-responsive coil to α-helix secondary structure transition, are conjugated to polymer precursors to yield linear AB and graft ABA peptide-poly(ethylene oxide) conjugates. While the PEO B-block is comparable, the conjugates differ in topologies of the peptide bearing A-blocks. The influences of topology on the structure transitions in the peptide segments are investigated, comparing linear AB-bioconjugates with graft ABA-bioconjugates having multiple peptide segments combined in star or pom-pom topologies.
Assuntos
Peptídeos/química , Microscopia de Força Atômica , Polietilenoglicóis/química , Estrutura Secundária de ProteínaRESUMO
Substituted polyphenylacetylenes featuring reactive pentafluorophenyl (PFP) ester moieties are synthesized. Parts of the reactive PFP groups are then converted with a mono ortho-nitrobenzyl-protected diamine in variable ratios. Thin films are prepared from these copolymers and irradiated with UV light (λ = 365 nm), resulting in crosslinking of the irradiated areas and hence enabling a photopatterning. We found that during the photocrosslinking process, the excess of PFP ester moieties is stable and remained intact, enabling a subsequent post-polymerization modification step with amines. Noteworthy, this subsequent modification with amines results in a dramatically shift in the UV-vis absorption spectra, rendering these patterned conjugated polymer films ideal candidates for optical sensors.
Assuntos
Alcinos/química , Dispositivos Ópticos , Polímeros/síntese química , Aminas/química , Ésteres , Processos Fotoquímicos , Espectroscopia de Infravermelho com Transformada de Fourier , Raios UltravioletaAssuntos
Sistemas de Liberação de Medicamentos , Compostos Férricos/química , Nanopartículas , RNA de Cadeia Dupla/química , Receptores de Superfície Celular/química , Receptor 3 Toll-Like/química , Linhagem Celular Tumoral , Humanos , Rim/citologia , Ligantes , Magnetismo , Estrutura Molecular , RNA de Cadeia Dupla/metabolismo , RNA Mensageiro/biossínteseRESUMO
Polymer coated superparamagnetic gamma-Fe(2)O(3) nanoparticles were derivatized with a synthetic double-stranded RNA [poly(IC)], a known allosteric activator of the latent (2-5)A synthetase, to separate a single 35 kDa protein from a crude extract which cross reacted with antibodies raised against the sponge enzyme.