Narrative review of occupational exposures and noncommunicable diseases.

OBJECTIVE: Within the scope of the Exposome Project for Health and Occupational Research on applying the exposome concept to working life health, we aimed to provide a broad overview of the status of knowledge on occupational exposures and associated health effects across multiple noncommunicable diseases (NCDs) to help inform research priorities. METHODS: We conducted a narrative review of occupational risk factors that can be considered to have "consistent evidence for an association," or where there is "limited/inadequate evidence for an association" for 6 NCD groups: nonmalignant respiratory diseases; neurodegenerative diseases; cardiovascular/metabolic diseases; mental disorders; musculoskeletal diseases; and cancer. The assessment was done in expert sessions, primarily based on systematic reviews, supplemented with narrative reviews, reports, and original studies. Subsequently, knowledge gaps were identified, e.g. based on missing information on exposure-response relationships, gender differences, critical time-windows, interactions, and inadequate study quality. RESULTS: We identified over 200 occupational exposures with consistent or limited/inadequate evidence for associations with one or more of 60+ NCDs. Various exposures were identified as possible risk factors for multiple outcomes. Examples are diesel engine exhaust and cadmium, with consistent evidence for lung cancer, but limited/inadequate evidence for other cancer sites, respiratory, neurodegenerative, and cardiovascular diseases. Other examples are physically heavy work, shift work, and decision latitude/job control. For associations with limited/inadequate evidence, new studies are needed to confirm the association. For risk factors with consistent evidence, improvements in study design, exposure assessment, and case definition could lead to a better understanding of the association and help inform health-based threshold levels. CONCLUSIONS: By providing an overview of knowledge gaps in the associations between occupational exposures and their health effects, our narrative review will help setting priorities in occupational health research. Future epidemiological studies should prioritize to include large sample sizes, assess exposures prior to disease onset, and quantify exposures. Potential sources of biases and confounding need to be identified and accounted for in both original studies and systematic reviews.

Elemental carbon - An efficient method to measure occupational exposure from materials in the graphene family.

Graphene is a 2D-material with many useful properties such as flexibility, elasticity, and conductivity among others. Graphene could therefore become a material used in many occupational fields in the future, which can give rise to occupational exposure. Today, exposure is unknown, due to the lack of efficient measuring techniques for occupational exposure to graphene. Readily available screening techniques for air sampling and -analysis are either nonspecific or nonquantitative. Quantifying materials from the broad graphene family by an easy-to-use method is important for the large-scale industrial application of graphene, especially when for the safety of working environment. Graphene consists primarily of elemental carbon, and the present study evaluates the organic carbon/elemental carbon (OC/EC)-technique for exposure assessment. The purpose of this work is to evaluate the OC/EC analysis technique as an efficient and easy-to-use method for quantification of occupational exposure to graphene. Methods that can identify graphene would be preferable for screening, but they are time consuming and semi-quantitative and therefore not suited for quantitative work environment assessments. The OC/EC-technique is a thermal optical analysis (TOA), that quantitively determines the amount of and distinguishes between two different types of carbon, organic and elemental. The technique is standardised, well-established and among other things used for diesel exposure measurements (ref standard). OC/EC could therefore be a feasible measuring technique to quantitively determine occupational exposure to graphene. The present evaluation of the technique provides an analytical method that works quantitatively for graphene, graphene oxide and reduced graphene oxide. Interestingly, the TOA technique makes it possible to distinguish between the three graphene forms used in this study. The technique was tested in an industrial setting and the outcome suggests that the technique is an efficient monitoring technique to be used in combination with characterisation techniques like for example Raman spectroscopy, scanning electron microscopy and atomic force microscopy.

Hexavalent chromium still a concern in Sweden - Evidence from a cross-sectional study within the SafeChrom project.

OBJECTIVES: Hexavalent chromium (Cr(VI)) is classified as a human carcinogen. Occupational Cr(VI) exposure can occur during different work processes, but the current exposure to Cr(VI) at Swedish workplaces is unknown. METHODS: This cross-sectional study (SafeChrom) recruited non-smoking men and women from 14 companies with potential Cr(VI) exposure (n = 113) and controls from 6 companies without Cr(VI) exposure (n = 72). Inhalable Cr(VI) was measured by personal air sampling (outside of respiratory protection) in exposed workers. Total Cr was measured in urine (pre- and post-shift, density-adjusted) and red blood cells (RBC) (reflecting Cr(VI)) in exposed workers and controls. The Bayesian tool Expostats was used to assess risk and evaluate occupational exposure limit (OEL) compliance. RESULTS: The exposed workers performed processing of metal products, steel production, welding, plating, and various chemical processes. The geometric mean concentration of inhalable Cr(VI) in exposed workers was 0.15 µg/m3 (95% confidence interval: 0.11-0.21). Eight of the 113 exposed workers (7%) exceeded the Swedish OEL of 5 µg/m3, and the Bayesian analysis estimated the share of OEL exceedances up to 19.6% for stainless steel welders. Median post-shift urinary (0.60 µg/L, 5th-95th percentile 0.10-3.20) and RBC concentrations (0.73 µg/L, 0.51-2.33) of Cr were significantly higher in the exposed group compared with the controls (urinary 0.10 µg/L, 0.06-0.56 and RBC 0.53 µg/L, 0.42-0.72). Inhalable Cr(VI) correlated with urinary Cr (rS = 0.64) and RBC-Cr (rS = 0.53). Workers within steel production showed the highest concentrations of inhalable, urinary and RBC Cr. Workers with inferred non-acceptable local exhaustion ventilation showed significantly higher inhalable Cr(VI), urinary and RBC Cr concentrations compared with those with inferred acceptable ventilation. Furthermore, workers with inferred correct use of respiratory protection were exposed to significantly higher concentrations of Cr(VI) in air and had higher levels of Cr in urine and RBC than those assessed with incorrect or no use. Based on the Swedish job-exposure-matrix, approximately 17 900 workers were estimated to be occupationally exposed to Cr(VI) today. CONCLUSIONS: Our study demonstrates that some workers in Sweden are exposed to high levels of the non-threshold carcinogen Cr(VI). Employers and workers seem aware of Cr(VI) exposure, but more efficient exposure control strategies are required. National strategies aligned with the European strategies are needed in order to eliminate this cause of occupational cancer.

Time trends in occupational exposure to chemicals in Sweden: proportion exposed, distribution across demographic and labor market strata, and exposure levels.

OBJECTIVE: This study investigated time trends in occupational exposure to various chemicals in Sweden and the distribution across demographic and labor market sectors. METHODS: Exposure to six chemicals was investigated from 1980 to 2013 by application of a job exposure matrix to national population registers. Respirable crystalline silica (RCS), diesel engine exhaust, welding fumes, wood dust, chlorinated hydrocarbon solvents, and lead were selected to represent different groups of chemicals. Trends in exposure prevalence were investigated by linear regression and compared to the occupationally active population. Confidence intervals for the rate of change over time were obtained by bootstrapping. RESULTS: The proportion of workers born outside the Nordic countries increased over time in those exposed to RCS, diesel exhaust and wood dust. There was a shift of exposed jobs to small companies (<50 employees), especially for RCS, welding fumes, wood dust, and chlorinated hydrocarbon solvents. For RCS and welding fumes, there was a marked drop in exposure levels from 1980 to 1990 but small changes thereafter. Exposure to lead diminished, both in terms of prevalence and intensity. CONCLUSIONS: Over time, several exposures tended to shift to small companies, the construction sector, and migrant workers, all factors being indicative of less well-controlled working conditions. Occupational exposure to chlorinated organic solvents and lead diminished, while exposure levels to RCS and welding fumes have changed little since 1990. In view of the serious and well-established negative health effects, increased efforts to reduce exposure to RCS and welding fumes are needed.

Exploring Methods for Surveillance of Occupational Exposure from Additive Manufacturing in Four Different Industrial Facilities.

3D printing, a type of additive manufacturing (AM), is a rapidly expanding field. Some adverse health effects have been associated with exposure to printing emissions, which makes occupational exposure studies important. There is a lack of exposure studies, particularly from printing methods other than material extrusion (ME). The presented study aimed to evaluate measurement methods for exposure assessment in AM environments and to measure exposure and emissions from four different printing methods [powder bed fusion (PBF), material extrusion (ME), material jetting (MJ), and vat photopolymerization] in industry. Structured exposure diaries and volatile organic compound (VOC) sensors were used over a 5-day working week. Personal and stationary VOC samples and real-time particle measurements were taken for 1 day per facility. Personal inhalable and respirable dust samples were taken during PBF and MJ AM. The use of structured exposure diaries in combination with measurement data revealed that comparatively little time is spent on actual printing and the main exposure comes from post-processing tasks. VOC and particle instruments that log for a longer period are a useful tool as they facilitate the identification of work tasks with high emissions, highlight the importance of ventilation and give a more gathered view of variations in exposure. No alarming levels of VOCs or dust were detected during print nor post-processing in these facilities as adequate preventive measures were installed. As there are a few studies reporting negative health effects, it is still important to keep the exposure as low as reasonable.

Effect of welding fumes on the cardiovascular system: a six-year longitudinal study.

Objective This study investigated whether low-to-moderate exposure to welding fumes is associated with adverse effects on the cardiovascular system. Methods To test this, we performed a longitudinal analysis of 78 mild steel welders and 96 controls; these subjects were examined twice, six years apart (ie, timepoints 1 and 2). All subjects (male and non-smoking at recruitment) completed questionnaires describing their health, work history, and lifestyle. We measured their blood pressure, endothelial function (by EndoPAT), and risk markers for cardiovascular disease [low-density lioprotein (LDL), homocysteine, C-reactive protein]. Exposure to welding fumes was assessed from the responses to questionnaires and measurements of respirable dust in their breathing zones adjusted for use of respiratory protection equipment. Linear mixed-effect regression models were used for the longitudinal analysis. Results Median respirable dust concentrations, adjusted for respirable protection, of the welders were 0.7 (5-95 percentile range 0.2-4.2) and 0.5 (0.1-1.9) mg/m 3at timepoints 1 and 2, respectively. Over the six-year period, welders showed a statistically significant increase in systolic [5.11 mm Hg, 95% confidence interval (CI) 1.92-8.31] and diastolic (3.12 mm Hg, 95% CI 0.74-5.5) blood pressure compared with controls (multi-variable adjusted mixed effect models). Diastolic blood pressure increased non-significantly by 0.22 mm Hg (95% CI -0.02-0.45) with every additional year of welding work. No consistent significant associations were found between exposure and endothelial function, LDL, homocysteine, or C-reactive protein. Conclusion Exposure to welding fumes at low-to-moderate levels is associated with increased blood pressure, suggesting that reducing the occupational exposure limit (2.5 mg/m 3for inorganic respirable dust in Sweden) is needed to protect cardiovascular health of workers.

Fluorene exposure among PAH-exposed workers is associated with epigenetic markers related to lung cancer.

OBJECTIVES: Exposure to high-molecular-weight polycyclic aromatic hydrocarbons (PAHs) may cause cancer in chimney sweeps and creosote-exposed workers, however, knowledge about exposure to low-molecular-weight PAHs in relation to cancer risk is limited. In this study, we aimed to investigate occupational exposure to the low-molecular-weight PAHs phenanthrene and fluorene in relation to different cancer biomarkers. METHODS: We recruited 151 chimney sweeps, 19 creosote-exposed workers and 152 unexposed workers (controls), all men. We measured monohydroxylated metabolites of phenanthrene and fluorene in urine using liquid chromatography coupled to tandem mass spectrometry. We measured, in peripheral blood, the cancer biomarkers telomere length and mitochondrial DNA copy number using quantitative PCR; and DNA methylation of F2RL3 and AHRR using pyrosequencing. RESULTS: Median PAH metabolite concentrations were higher among chimney sweeps (up to 3 times) and creosote-exposed workers (up to 353 times), compared with controls (p<0.001; adjusted for age and smoking). ∑OH-fluorene (sum of 2-hydroxyfluorene and 3-hydroxyfluorene) showed inverse associations with percentage DNA methylation of F2RL3 and AHRR in chimney sweeps (B (95% CI)=-2.7 (-3.9 to -1.5) for F2RL3_cg03636183, and -7.1 (-9.6 to -4.7) for AHRR_cg05575921: adjusted for age and smoking), but not in creosote-exposed workers. In addition, ∑OH-fluorene showed a 42% mediation effect on the inverse association between being a chimney sweep and DNA methylation of AHRR CpG2. CONCLUSIONS: Chimney sweeps and creosote-exposed workers were occupationally exposed to low-molecular-weight PAHs. Increasing fluorene exposure, among chimney sweeps, was associated with lower DNA methylation of F2RL3 and AHRR, markers for increased lung cancer risk. These findings warrant further investigation of fluorene exposure and toxicity.

Filaggrin variations are associated with PAH metabolites in urine and DNA alterations in blood.

Dermal chemical exposure is common in many professions. The filaggrin protein is important for the skin barrier and variations in the filaggrin gene (FLG) may influence the uptake of chemicals via the skin, and consequently, the degree of systemic effects. The aim of this study was to investigate, in chimney sweeps with occupational exposure to polycyclic aromatic hydrocarbons (PAH) from soot, the influence of variation in FLG on internal PAH dose and DNA alterations, including epigenetic, previously linked to cancer and cardiovascular disease. We used TaqMan PCR to genotype 151 chimney sweeps and 152 controls for four FLG null variants (R501X, R2447X, S3247X and 2282del4) which cause impaired skin barrier, and FLG copy number variation (12th repeat, CNV12) which potentially is beneficial for the skin barrier. The internal dose of PAH was represented by urinary PAH metabolites (e.g. 1-hydroxypyrene and 3-hydroxybenzo[a]pyrene) that we measured by LC-MS/MS. We measured epigenetic alterations (methylation of AHRR and F2RL3) in blood by pyrosequencing; and DNA alterations (telomere length and mitochondrial DNA copy number) by real-time PCR. Hypomethylation of AHRR or F2RL3 is a risk factor for lung cancer and shorter telomere length a risk factor for cardiovascular disease. The frequencies of FLG null were 8.6 and 11.8% (p = 0.35), and CNV12 27.8 and 19.7% (p = 0.09) in chimney sweeps and controls, respectively. We found that among chimney sweeps working predominately with soot sweeping (high PAH exposure), CNV12 carriers had lower concentrations of PAH metabolites in urine compared with non-carriers (median 1-hydroxypyrene = 0.37 vs 0.86 µg/g creatinine respectively; p = 0.025 by linear regression models adjusted for age, BMI and smoking) compared to sweeps not carrying CNV12. Further, FLG null was associated with approximately 2.5% higher methylation of F2RL3 (cg03636183, p = 0.019 after adjustment for exposure group, age, BMI and smoking). FLG null was associated with approximately 7% shorter telomere length (p = 0.015, adjusted model). Our results suggest that FLG variations may influence the dose of PAH in highly exposed workers, possibly via dermal uptake. It also suggests that FLG variation may influence the degree of (epi)genotoxicity in the body. FLG variation is common in the working population and should be considered in risk assessment.

Cancer-related proteins in serum are altered in workers occupationally exposed to polycyclic aromatic hydrocarbons: a cross-sectional study.

Exposure to some polycyclic aromatic hydrocarbons (PAH) increases the risk of cancer and is common particularly for workers in occupations such as chimney sweeping. In exposed workers, screening of early cancer-related markers provides important information to identify individuals at risk. Here, we aimed to elucidate the associations between PAH exposure and serum levels of cancer-related proteins in 118 chimney sweeps and 126 occupationally unexposed controls, all non-smoking males from Sweden. Monoydroxylated metabolites of pyrene, phenanthrene, benzo[a]pyrene and benzo[a]anthracene were measured in urine using liquid chromatography coupled to tandem mass spectrometry and 90 cancer-related proteins were measured in serum using a proximity extension assay. Linear regression analysis adjusted for age and body mass index, and false discovery rate (FDR) identified 17 serum proteins that were differentially expressed (16 upregulated and 1 downregulated) in chimney sweeps compared with controls (FDR < 0.05). Concentrations of the peptidase kallikrein 13 (KLK13) showed significant positive associations with urinary concentrations of the PAH metabolites 3-hydroxybenzo[a]pyrene (3-OH-BaP) [B, 95% confidence interval (CI): 0.042, 0.008-0.076] and 3-hydroxybenzo[a]anthracene (3-OH-BaA) (B, 95% CI: 0.068, 0.002-0.134). Moreover, dose-response relationships were observed between KLK13 and 3-OH-BaP (trend test P = 0.027) and 3-OH-BaA (P = 0.035). Pathway and gene ontology analyses showed that cell movement, cell adhesion and cell migration were the predominant molecular functions associated with the top differentially expressed proteins. In conclusion, we found a number of putative cancer-related proteins differentially expressed in workers exposed to PAH. This warrants effective measure to reduce PAH exposure among workers as well as further investigation to confirm these findings.

DNA methylation of the cancer-related genes F2RL3 and AHRR is associated with occupational exposure to polycyclic aromatic hydrocarbons.

Some polycyclic aromatic hydrocarbons (PAH) are known carcinogens and workplace PAH exposure may increase the risk of cancer. Monitoring early cancer-related changes can indicate whether the exposure is carcinogenic. Here, we enrolled 151 chimney sweeps, 152 controls and 19 creosote-exposed male workers from Sweden. We measured urinary PAH metabolites using LC/MS/MS, the cancer-related markers telomere length (TL) and mitochondrial DNA copy number (mtDNAcn) using qPCR, and DNA methylation of lung cancer-related genes F2RL3 and AHRR using pyrosequencing. The median 1-hydroxypyrene (PAH metabolite) concentrations were highest in creosote-exposed workers (8.0 µg/g creatinine) followed by chimney sweeps (0.34 µg/g creatinine) and controls (0.05 µg/g creatinine). TL and mtDNAcn did not differ between study groups. Chimney sweeps and creosote-exposed workers had significantly lower methylation of AHRR CpG site cg05575921 (88.1 and 84.9%, respectively) than controls (90%). Creosote-exposed workers (73.3%), but not chimney sweeps (76.6%) had lower methylation of F2RL3 cg03636183 than controls (76.7%). Linear regression analyses showed that chimney sweeps had lower AHRR cg05575921 methylation (B = -2.04; P < 0.057, adjusted for smoking and age) and lower average AHRR methylation (B = -2.05; P < 0.035), and non-smoking chimney sweeps had lower average F2RL3 methylation (B = -0.81; P < 0.042, adjusted for age) compared with controls. These cancer-related markers were not associated with urinary concentrations of PAH metabolites. In conclusion, although we found no associations with PAH metabolites in urine (short-term exposure), our results suggest dose-response relationship between PAH exposure and DNA hypomethylation of lung cancer-related loci. These findings indicate that further protective measures should be taken to reduce PAH exposure.

Early markers of cardiovascular disease are associated with occupational exposure to polycyclic aromatic hydrocarbons.

Occupational exposure to soot, rich in polycyclic aromatic hydrocarbons (PAH), has been associated with increased risk of cardiovascular disease (CVD). However, our knowledge about PAH exposure and early markers of CVD remains limited. In this cross-sectional study of 151 chimney sweeps and 152 controls, we investigated occupational exposure to PAH and early markers of CVD. Blood pressure (BP) (chimney sweeps only), urinary PAH metabolites and serum biomarkers were measured (C-reactive protein, homocysteine, gamma-glutamyltransferase, cholesterol, HDL, LDL, and triglycerides). Chimney sweeps had up to 7 times higher concentrations of PAH metabolites in urine than controls (P < 0.001): median concentrations (adjusted for specific gravity) for 1-hydroxypyrene, 2-hydroxyphenanthrene, 3-hydroxybenzo[a]pyrene, and 3-hydroxybenzo[a]anthracene were 0.56 µg/L, 0.78 µg/L, 4.75 ng/L, and 6.28 ng/L, respectively. Compared with controls, chimney sweeps had increased homocysteine, cholesterol, and HDL (ß = 3.4 µmol/L, 0.43 mmol/L, and 0.13 mmol/L, respectively, P ≤ 0.003, adjusted for age, BMI, and smoking). In chimney sweeps, PAH metabolites correlated positively with the percentage of soot sweeping (P < 0.001). 2-hydroxyphenanthrene, 3-hydroxybenzo[a]pyrene, and 3-hydroxybenzo[a]anthracene were positively associated with diastolic BP (P < 0.044, adjusted for age, BMI, and smoking). PAH exposure among chimney sweeps resulted in elevated levels of markers for CVD risk. These findings stress the need to reduce occupational exposure to PAH.

Occupational exposure to particles and mitochondrial DNA - relevance for blood pressure.

BACKGROUND: Particle exposure is a risk factor for cardiovascular diseases. Mitochondrial DNA (mtDNA) is a primary target for oxidative stress generated by particle exposure. We aimed to elucidate the effects of occupational exposure to particle-containing welding fumes on different biomarkers of mtDNA function, and in turn, explore if they modify the association between particle exposure and cardiovascular response, measured as blood pressure. METHODS: We investigated 101 welders and 127 controls (all non-smoking males) from southern Sweden. Personal sampling of the welders' exposure to respirable dust was performed during work hours (average sampling time: 6.8 h; range: 2.4-8.6 h) and blood pressure was measured once for each subject. We measured relative mtDNA copy number by quantitative PCR and methylation of the mitochondrial regulatory region D-loop and the tRNA encoding gene MT-TF by bisulfite-pyrosequencing. We calculated the relative number of unmethylated D-loop and MT-TF as markers of mtDNA function to explore the modification of mtDNA on the association between particle exposure and blood pressure. General linear models were used for statistical analyses. RESULTS: Welders had higher mtDNA copy number (ß = 0.11, p = 0.003) and lower DNA methylation of D-loop (ß = -1.4, p = 0.002) and MT-TF (ß = -1.5, p = 0.004) than controls. Higher mtDNA copy number was weakly associated with higher personal respirable dust exposure among welders with exposure level above 0.7 mg/m3 (ß = 0.037, p = 0.054). MtDNA function modified the effect of welding fumes on blood pressure: welders with low mtDNA function had higher blood pressure than controls, while no such difference was found in the group with high mtDNA function. CONCLUSION: Increased mtDNA copy number and decreased D-loop and MT-TF methylation were associated with particle-containing welding fumes exposure, indicating exposure-related oxidative stress. The modification of mtDNA function on exposure-associated increase in blood pressure may represent a mitochondria-environment interaction.

Chimney sweeps in Sweden: a questionnaire-based assessment of long-term changes in work conditions, and current eye and airway symptoms.

OBJECTIVES: To explore chimney sweeping work tasks, chimney sweeps' use of protective equipment, and type of fuel used by clients, over time. Further, to assess work-relatedness of current eye and airway symptoms. METHODS: In a cross-sectional study in 2011, male Swedish chimney sweeps (n = 483; age 21-69 years) answered a questionnaire about their occupational history and eye and airway symptoms. RESULTS: Between 1960 and 2010, black-soot-sweeping in private homes was the major task, although it decreased during the time period, for chimney sweeps. Between 1975 and 2010, the use of petroleum oil decreased, whereas the use of pellets and wood increased. Also, the use of gloves and masks increased significantly. Black-soot-sweeping in industry was associated with work-related eye symptoms (prevalence odds ratio POR = 3.76, 95% CI: 1.72-8.24, for every 10% increment of working time, adjusted for age and tobacco smoking). Chimney sweeps also had slightly higher prevalence of cough with increasing black-soot-sweeping (POR = 1.06, 95% CI: 0.99-1.13 for every 10% increment, further adjusted for the use of mask), and the association was more pronounced, although nonsignificant, for black-soot-sweeping in industry (adjusted POR = 1.26, 95% CI: 0.98-1.61). CONCLUSIONS: Chimney sweeping tasks and use of protective equipment as well as type of fuel used by the clients changed significantly over the last 35 years, which may have changed chimney sweeps' exposure to soot. Still, chimney sweeps in Sweden have black-soot-sweeping-related eye and airway symptoms.

Exposure to welding fumes is associated with hypomethylation of the F2RL3 gene: a cardiovascular disease marker.

BACKGROUND: Welders are at risk for cardiovascular disease. Recent studies linked tobacco smoke exposure to hypomethylation of the F2RL3 (coagulation factor II (thrombin) receptor-like 3) gene, a marker for cardiovascular disease prognosis and mortality. However, whether welding fumes cause hypomethylation of F2RL3 remains unknown. METHODS: We investigated 101 welders (median span of working as a welder: 7 years) and 127 unexposed controls (non-welders with no obvious exposure to respirable dust at work), age range 23-60 years, all currently non-smoking, in Sweden. The participants were interviewed about their work history, lifestyle factors and diseases. Personal sampling of respirable dust was performed for the welders. DNA methylation of F2RL3 in blood was assessed by pyrosequencing of four CpG sites, CpG_2 (corresponds to cg03636183) to CpG_5, in F2RL3. Multivariable linear regression analysis was used to assess the association between exposure to welding fumes and F2RL3 methylation. RESULTS: Welders had 2.6% lower methylation of CpG_5 than controls (p<0.001). Higher concentrations of measured respirable dust among the welders were associated with hypomethylation of CpG_2, CpG_4 and CpG_5 (ß=-0.49 to -1.4, p<0.012); p<0.029 adjusted for age, previous smoking, passive smoking, education, current residence and respirator use. Increasing the number of years working as a welder was associated with hypomethylation of CpG_4 (linear regression analysis, ß=-0.11, p=0.039, adjusted for previous smoking). Previous tobacco smokers had 1.5-4.7% (p<0.014) lower methylation of 3 of the 4 CpG sites in F2RL3 (CpG_2, CpG_4 and CpG_5) compared to never-smokers. A non-significant lower risk of cardiovascular disease with more methylation was observed for all CpG sites. CONCLUSIONS: Welding fumes exposure and previous smoking were associated with F2RL3 hypomethylation. This finding links low-to-moderate exposure to welding fumes to adverse effects on the cardiovascular system, and suggests a potential mechanistic pathway for this link, via epigenetic effects on F2RL3 expression.

A Cross-Sectional Study of the Cardiovascular Effects of Welding Fumes.

OBJECTIVES: Occupational exposure to particulate air pollution has been associated with an increased risk of cardiovascular disease. However, the risk to welders working today remains unclear. We aimed to elucidate the cardiovascular effects of exposure to welding fumes. METHODS: In a cross-sectional study, structured interviews and biological sampling were conducted for 101 welders and 127 controls (all non-smoking males) from southern Sweden. Personal breathing zone sampling of respirable dust was performed. Blood pressure (BP) and endothelial function (using peripheral arterial tonometry) were measured. Plasma and serum samples were collected from peripheral blood for measurement of C-reactive protein, low-density lipoprotein, homocysteine, serum amyloid A, and cytokines. RESULTS: Welders were exposed to 10-fold higher levels of particles than controls. Welders had significantly higher BP compared to controls, an average of 5 mm Hg higher systolic and diastolic BP (P ≤ 0.001). IL-8 was 3.4 ng/L higher in welders (P=0.010). Years working as a welder were significantly associated with increased BP (ß=0.35, 95%CI 0.13 - 0.58, P=0.0024 for systolic BP; ß=0.32, 95%CI 0.16 - 0.48, P<0.001 for diastolic BP, adjusted for BMI) but exposure to respirable dust was not associated with BP. No clear associations occurred between welding and endothelial function, or other effect markers. CONCLUSIONS: A modest increase in BP was found among welders compared to controls suggesting that low-to-moderate exposure to welding fumes remains a risk factor for cardiovascular disease.

Toluene diisocyanate: Induction of the autotaxin-lysophosphatidic acid axis and its association with airways symptoms.

Diisocyanates are industrial chemicals which have a wide range of applications in developed and developing countries. They are notorious lung toxicants and respiratory sensitizers. However, the mechanisms behind their adverse effects are not adequately characterized. Autotaxin (ATX) is an enzyme producing lysophosphatidic acid (LPA), and the ATX-LPA axis has been implicated in lung related inflammatory conditions and diseases, including allergic asthma, but not to toxicity of environmental low-molecular-weight chemicals. We investigated effects of toluene diisocyanate (TDI) on ATX induction in human lung epithelial cell models, and we correlated LPA-levels in plasma to biomarkers of TDI exposure in urine collected from workers exposed to <5ppb (parts per billion). Information on workers' symptoms was collected through interviews. One nanomolar TDI robustly induced ATX release within 10min in vitro. A P2X7- and P2X4-dependent microvesicle formation was implicated in a rapid ATX release and a subsequent protein synthesis. Co-localization between purinergic receptors and ATX was documented by immunofluorescence and confocal microscopy. The release was modulated by monocyte chemoattractant protein-1 (MCP-1) and by extracellular ATP. In workers, we found a dose-response relationship between TDI exposure biomarkers in urine and LPA levels in plasma. Among symptomatic workers reporting "sneezing", the LPA levels were higher than among non-symptomatic workers. This is the first report indicating induction of the ATX-LPA axis by an environmental low-molecular-weight chemical, and our data suggest a role for the ATX-LPA axis in TDI toxicity.

Oxidative stress, telomere shortening, and DNA methylation in relation to low-to-moderate occupational exposure to welding fumes.

Evidence suggests that exposure to welding fumes is a risk factor for lung cancer. We examined relationships between low-to-moderate occupational exposure to particles from welding fumes and cancer-related biomarkers for oxidative stress, changes in telomere length, and alterations in DNA methylation. We enrolled 101 welders and 127 controls (all currently nonsmoking men) from southern Sweden. We performed personal sampling of respirable dust and measured 8-oxodG concentrations in urine using a simplified liquid chromatography tandem mass spectrometry method. Telomere length in peripheral blood was measured by quantitative polymerase chain reaction. Methylation status of 10 tumor suppressor genes was determined by methylation-sensitive high-resolution melting analysis. All analyses were adjusted for age, body mass index, previous smoking, passive smoking, current residence, and wood burning stove/boiler at home. Welders were exposed to respirable dust at 1.2 mg/m(3) (standard deviation, 3.3 mg/m(3); range, 0.1-19.3), whereas control exposures did not exceed 0.1 mg/m(3) (P < 0.001). Welders and controls did not differ in 8-oxodG levels (ß = 1.2, P = 0.17) or relative telomere length (ß = -0.053, P = 0.083) in adjusted models. Welders showed higher probability of adenomatous polyposis coli (APC) methylation in the unadjusted model (odds ratio = 14, P = 0.014), but this was not significant in the fully adjusted model (P = 0.052). Every working year as a welder was associated with 0.0066 units shorter telomeres (95% confidence interval -0.013 to -0.00053, P = 0.033). Although there were no clear associations between concentrations of respirable dust and the biomarkers, there were modest signs of associations between oxidative stress, telomere alterations, DNA methylation, and occupational exposure to low-to-moderate levels of particles.

The ordinary work environment increases symptoms from eyes and airways in mild steel welders.

PURPOSE: We aimed to follow diary-registered symptoms from eyes and airways in mild steel welders and relate them to different exposure measures. Furthermore, we would clarify the influence of possible effect modifiers. METHODS: Non-smoking welders with (N = 74) and without (N = 32) work-related symptoms the last month were enroled. Symptoms and work tasks each day for three two-week periods during 1 year were obtained. Respirable dust (RD) was measured 1 day each period for each worker. The personal daily exposure was assessed as: (1) days at work, (2) welding time and (3) estimates of RD from welding and grinding, calculated from diary entries and measurements. RESULTS: Only 9.2 % of the particle measurements exceed the Swedish occupational exposure limit (OEL; 5 mg/m(3)). Days at work increased the risk of symptoms studied: eyes: 1.79 (1.46-2.19), nasal: 2.16 (1.81-2.58), dry cough: 1.50 (1.23-1.82) and wheezing and/or dyspnoea: 1.27 (1.03-1.56; odds ratio, 95 % confidence interval). No clear dose-response relationships were found for the other exposure estimates. Eye symptoms increased by number of years welding. Nasal symptoms and dry cough increased having forced expiratory volume in first second below median at baseline. Wheezing and/or dyspnoea increased in winter, by number of years welding, having a negative standard skin-prick test and having a vital capacity above median at baseline. CONCLUSION: The current Swedish OEL may not protect welders against eye and airway symptoms. The results add to the evidence that welders should be offered regular medical surveillance from early in the career.