Resorbable engineered barrier membranes for oral surgery applications.

Population aging, reduced economic capacity, and neglecting the treatments for oral pathologies, are the main causal factors for about 3 billion individuals who are suffering from partial/total edentulism or alveolar bone resorption: thus, the demand for dental implants is increasingly growing. To achieve a good prognosis for implant-supported restorations, adequate peri-implant bone volume is mandatory. The Guided Bone Regeneration (GBR) technique is one of the most applied methods for alveolar bone reconstruction and treatment of peri-implant bone deficiencies. This technique involves the use of different types of membranes in association with some bone substitutes (autologous, homologous, or heterologous). However, time for bone regeneration is often too long and the bone quality is not simply predictable. This study aims at engineering and evaluating the efficacy of modified barrier membranes, enhancing their bioactivity for improved alveolar bone tissue regeneration. We investigated membranes functionalized with chitosan (CS) and chitosan combined with the peptide GBMP1α (CS + GBMP1α), to improve bone growth. OsseoGuard® membranes, derived from bovine Achilles tendon type I collagen crosslinked with formaldehyde, were modified using CS and CS + GBMP1α. The functionalization, carried out with 1-ethyl-3-(3 dimethylaminopropyl)carbodiimide and sulfo-N-Hydroxysuccinimide (EDC/sulfo-NHS), was assessed through FT-IR and XPS analyses. Biological assays were performed by directly seeding human osteoblasts onto the materials to assess cell proliferation, mineralization, gene expression of Secreted Phosphoprotein 1 (SPP1) and Runt-Related Transcription Factor 2 (Runx2), and antibacterial properties. Both CS and CS + GBMP1α functionalizations significantly enhanced human osteoblast proliferation, mineralization, gene expression, and antibacterial activity compared to commercial membranes. The CS + GBMP1α functionalization exhibited superior outcomes in all biological assays. Mechanical tests showed no significant alterations of membrane biomechanical properties post-functionalization. The engineered membranes, especially those functionalized with CS + GBMP1α, are suitable for GBR applications thanks to their ability to enhance osteoblast activity and promote bone tissue regeneration. These findings suggest a potential advancement in the treatment of oral cavity problems requiring bone regeneration.

Cysteine-Modified Self-Assembling Peptides on Gold: The Role of the Head and Tail.

Molecular self-assembly consists of the spontaneous aggregation of molecules into a well-defined structure guided by noncovalent bonds. The self-assembly strategy is ubiquitous in nature and recently has been proposed as a nature-mimetic strategy in polymer science and biomaterial engineering. In this context, we aim at designing and testing innovative but simple chemical strategies to efficiently modify surfaces by exploiting minor modifications in the bioactive molecule functionalities, for example, introducing cysteine (Cys) as a terminal residue in self-assembling peptides (SAPs). In this work, we report the attenuated total reflection-Fourier transform infrared spectroscopy, synchrotron radiation-induced X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, and time-of-flight secondary ion mass spectrometry investigation of self-assembled layers of oligopeptides anchored onto gold surfaces through cysteine residues, opportunely inserted in an SAP (EAK16-II) main chain in three different positions: at the amine end group, at the carboxyl end group, and at both terminal groups (i.e., a bidentate SAP). This study, which allowed us to individuate in the bidentate SAP the best candidate for the controlled production of ordered SAP layers on the gold substrate surface, is envisaged to open wide perspectives for efficient chemical modification of surfaces with biomolecules, leading to obtaining innovative bioactive materials for applications in the field of tissue engineering.

Bifunctionalized Silver Nanoparticles as Hg2+ Plasmonic Sensor in Water: Synthesis, Characterizations, and Ecosafety.

In this work, hydrophilic silver nanoparticles (AgNPs), bifunctionalized with citrate (Cit) and L-cysteine (L-cys), were synthesized. The typical local surface plasmon resonance (LSPR) at λ max = 400 nm together with Dynamic Light Scattering (DLS) measurements (<2RH> = 8 ± 1 nm) and TEM studies (Ø = 5 ± 2 nm) confirmed the system nanodimension and the stability in water. Molecular and electronic structures of AgNPs were investigated by FTIR, SR-XPS, and NEXAFS techniques. We tested the system as plasmonic sensor in water with 16 different metal ions, finding sensitivity to Hg2+ in the range 1-10 ppm. After this first screening, the molecular and electronic structure of the AgNPs-Hg2+ conjugated system was deeply investigated by SR-XPS. Moreover, in view of AgNPs application as sensors in real water systems, environmental safety assessment (ecosafety) was performed by using standardized ecotoxicity bioassay as algal growth inhibition tests (OECD 201, ISO 10253:2006), coupled with determination of Ag+ release from the nanoparticles in fresh and marine aqueous exposure media, by means of ICP-MS. These latest studies confirmed low toxicity and low Ag+ release. Therefore, these ecosafe AgNPs demonstrate a great potential in selective detection of environmental Hg2+, which may attract a great interest for several biological research fields.

ToF-SIMS and principal component analysis of lipids and amino acids from inflamed and dysplastic human colonic mucosa.

Here, time of flight secondary ion mass spectrometry (ToF-SIMS) and multivariate analysis were combined to study the role of ulcerative colitis (UC), a type of inflammatory bowel disease (IBD), in the colon cancer progression. ToF-SIMS was used to obtain mass spectra and chemical maps from the mucosal surface of human normal (NC), inflamed (IC), and dysplastic (DC) colon tissues. Chemical mapping with a lateral resolution of ≈ 1 µm allowed to evaluate zonation of fatty acids and amino acids as well as the morphological condition of the intestinal glands. High mass resolution ToF-SIMS spectra showed chemical differences in lipid and amino acid composition as a function of pathological state. In positive ion mode, mono- (MAG), di- (DAG), and triacylglycerol (TAG) signals were detected in NC tissues, while in IC and DC tissues, the only cholesterol was present as lipid class representative. Signals from fatty acids, collected in negative ion mode, were subjected to principal component analysis (PCA). PCA showed a strict correlation between IC and DC samples, due to an increase of stearic, arachidonic, and linoleic acid. In the same way, differences in the amino acid composition were highlighted through multivariate analysis. PCA revealed that glutamic acid, leucine/isoleucine, and valine fragments are related to IC tissues. On the other hand, tyrosine, methionine, and tryptophan peaks contributed highly to the separation of DC tissues. Finally, a classification of NC, IC, and DC patients was also achieved through hierarchical cluster analysis of amino acid fragments. In this case, human colonic inflammation showed a stronger relationship with normal than dysplastic condition. Graphical Abstract ᅟ.

Characterization of naproxen-polymer conjugates for drug-delivery.

The synthesis and the characterization of three new naproxen decorated polymers are described. A versatile and general approach is employed to link the drug to polymers, affording the derivatives with a very high degree of purity. The release of the drug from the conjugates proved to be exceptionally slow, even in acidic aqueous media, and the kinetic of the process seems to be triggered by their solubility in water. On the other hand, the interesting outcome of the first ex vivo drug release experiments on human blood samples makes this preliminary study valuable for future investigations on the use of these polymeric prodrugs in in vivo treatment of inflammatory states.

The effect of post-mastectomy radiation therapy on breast implants: Unveiling biomaterial alterations with potential implications on capsular contracture.

Post-mastectomy breast reconstruction with expanders and implants is recognized as an integral part of breast cancer treatment. Its main complication is represented by capsular contracture, which leads to poor expansion, breast deformation, and pain, often requiring additional surgery. In such a scenario, the debate continues as to whether the second stage of breast reconstruction should be performed before or after post-mastectomy radiation therapy, in light of potential alterations induced by irradiation to silicone biomaterial. This work provides a novel, multi-technique approach to unveil the role of radiotherapy in biomaterial alterations, with potential involvement in capsular contracture. Following irradiation, implant shells underwent mechanical, chemical, and microstructural evaluation by means of tensile testing, Attenuated Total Reflectance Fourier Transform InfraRed spectroscopy (ATR/FTIR), Scanning Electron Microscopy (SEM), high resolution stylus profilometry, and Time of Flight Secondary Ion Mass Spectrometry (ToF-SIMS). Our findings are consistent with radiation-induced modifications of silicone that, although not detectable at the microscale, can be evidenced by more sophisticated nanoscale surface analyses. In light of these results, biomaterial irradiation cannot be ruled out as one of the possible co-factors underlying capsular contracture.

ß-Nitro derivatives of iron corrolates.

Two different methods for the regioselective nitration of different meso-triarylcorroles leading to the corresponding ß-substituted nitrocorrole iron complexes have been developed. A two-step procedure affords three Fe(III) nitrosyl products-the unsubstituted corrole, the 3-nitrocorrole, and the 3,17-dinitrocorrole. In contrast, a one-pot synthetic approach drives the reaction almost exclusively to formation of the iron nitrosyl 3,17-dinitrocorrole. Electron-releasing substituents on the meso-aryl groups of the triarylcorroles induce higher yields and longer reaction times than what is observed for the synthesis of similar triarylcorroles with electron-withdrawing functionalities, and these results can be confidently attributed to the facile formation and stabilization of an intermediate iron corrole π-cation radical. Electron-withdrawing substituents on the meso-aryl groups of triarylcorrole also seem to labilize the axial nitrosyl group which, in the case of the pentafluorophenylcorrole derivative, results in the direct formation of a disubstituted iron µ-oxo dimer complex. The influence of meso-aryl substituents on the progress and products of the nitration reaction was investigated. In addition, to elucidate the most important factors which influence the redox reactivity of these different iron nitrosyl complexes, selected compounds were examined by cyclic voltammetry and thin-layer UV-visible or FTIR spectroelectrochemistry in CH(2)Cl(2).

Nitration of iron corrolates: further evidence for non-innocence of the corrole ligand.

Mono- and di-substituted ß-nitro derivatives have been obtained from the reaction of ttcorrFeCl with sodium nitrite in refluxing DMF. This result is unprecedented for iron corrolates and further evidences the non-innocent character of the corrole ligand.