Background factors determining the time to intraocular lens dislocation.

PURPOSE: To clarify the characteristics of intraocular lens (IOL) dislocation requiring IOL suture or intraocular scleral fixation. METHODS: This retrospective consecutive case series included 21 eyes (21 patients) who required sutured or sutureless intrascleral IOL fixation following IOL extraction owing to IOL dislocation at the outpatient clinic in the Department of Ophthalmology, Saitama Red Cross Hospital, Japan, between January and December 2019. Medical records were retrospectively reviewed for background diseases, location of the dislocated IOL (intracapsular/extracapsular), insertion of a capsular tension ring (CTR), and the period from IOL insertion to dislocation. RESULTS: We included 21 eyes of 21 patients who required IOL suture or intrascleral fixation for IOL dislocation at our clinic from January to December 2019 were included. The most common background disease was pseudoexfoliation syndrome (four cases), followed by atopic dermatitis, dysplasia/dehiscence of the zonule, post-retinal detachment surgery, high myopia, and uveitis (three cases each). At the time of dislocation, the IOLs were either intracapsular (16 cases, including 3 cases with CTR insertion) or extracapsular (5 cases). The time from IOL insertion to IOL dislocation was 13.7 ± 8.1 years (maximum: 31.3 years, minimum: 1.7 years). CONCLUSIONS: In this study, all 21 cases represented late IOL dislocations occurring after 3 months postoperatively. Among these late IOL dislocation cases, IOL dislocation occurred in a short-medium period of time, especially in those with CTR insertion and weakness/dehiscence of the zonule, with an average of 3 to 5 years postoperatively. We propose referring to these cases as intermediate-term IOL dislocation.

Optical coherence tomography findings after surgery for sub-inner limiting membrane hemorrhage due to ruptured retinal arterial macroaneurysm.

Ruptured retinal arterial macroaneurysm (RAM) can cause sub-inner limiting membrane (ILM) hemorrhage, leading to acute vision loss in the elderly. Vitrectomy has been established as an effective treatment to remove hemorrhage and facilitate visual recovery. Although optical coherence tomography (OCT) is useful for the diagnosis of sub-ILM hemorrhage before surgery, little is known about the postoperative OCT findings. Here, we retrospectively investigated the records of nine eyes of nine patients who underwent surgery for sub-ILM hemorrhage due to RAM rupture. On postoperative OCT, hyperreflectivity throughout the full thickness of the central fovea was observed in eight eyes (88.9%), and disruption of the ellipsoid/interdigitation zone (EZ/IZ) was observed in seven out of eight eyes (87.5%). The widths of the hyperreflectivity and EZ disruption gradually decreased. Visual recovery was least favorable in two eyes, in which the EZ line continuation did not recover until the final follow-up. The OCT findings corresponded to the hemorrhagic staining identified on fundus photographs in at least four eyes; as per the fundus photographs the findings persisted even after the hemorrhage was absorbed. In contrast, the OCT findings resembled the appearance before the development of a full-thickness macular hole, suggesting fragility caused by the RAM rupture.

Bionic eye system mimicking microfluidic structure and intraocular pressure for glaucoma surgery training.

Among increasing eye diseases, glaucoma may hurt the optic nerves and lead to vision loss, the treatment of which is to reduce intraocular pressure (IOP). In this research, we introduce a new concept of the surgery simulator for Minimally Invasive Glaucoma Surgery (MIGS). The concept is comprised of an anterior eye model and a fluidic circulatory system. The model made of flexible material includes a channel like the Schlemm's canal (SC) and a membrane like the trabecular meshwork (TM) covering the SC. The system can monitor IOP in the model by a pressure sensor. In one of the MIGS procedures, the TM is cleaved to reduce the IOP. Using the simulator, ophthalmologists can practice the procedure and measure the IOP. First, considering the characteristics of human eyes, we defined requirements and target performances for the simulator. Next, we designed and manufactured the prototype. Using the prototype, we measured the IOP change before and after cleaving the TM. Finally, we demonstrated the availability by comparing experimental results and target performances. This simulator is also expected to be used for evaluations and developments of new MIGS instruments and ophthalmic surgery robots in addition to the surgical training of ophthalmologists.

Differential gene expression analysis using RNA sequencing: retinal pigment epithelial cells after exposure to continuous-wave and subthreshold micropulse laser.

PURPOSE: Subthreshold micropulse laser (SMPL) is more clinically efficient for the treatment of diabetic macular edema (DME) than the conventional continuous-wave (CW) laser. We aimed to characterize transcriptome changes after the application of these lasers and to compare the transcripts. METHODS: Human pluripotent stem cell-derived retinal pigment epithelial cells were exposed to laser irradiation. Differentially expressed genes (DEGs), distribution of heat shock protein (Hsp) family, gene expression profile, and gene ontology (GO) enrichment analysis based on RNA sequencing data were investigated at 3 h and 24 h after irradiation. RESULTS: CW laser induced more DEGs than SMPL (1771 vs. 520 genes). The expression of the Hsp family was confirmed in both groups: however, the induction patterns was different for different genes. GO enrichment analysis revealed that CW laser upregulated the expression of DEGs involved in vasculature development (GO: 0001944), related to apoptosis and repair after cell injury whereas SMPL upregulated the expression of DEGs involved in photoreceptor cell maintenance (GO: 0045494), photoreceptor cell development (GO: 0042461), and sensory perception of light stimuli (GO: 0050953). CONCLUSIONS: The results provide insights into the genetic responses and may contribute to the understanding of the molecular mechanisms of laser-induced thermal effects.

Changes in entropy on polarized-sensitive optical coherence tomography images after therapeutic subthreshold micropulse laser for diabetic macular edema: A pilot study.

PURPOSE: To investigate the dynamics of the healing process after therapeutic subthreshold micropulse laser (SMPL) for diabetic macular edema (DME) using polarization-sensitive optical coherence tomography (PS-OCT). METHODS: Patients with treatment-native or previously-treated DME were prospectively imaged using PS-OCT at baseline, 1, 2, 3, and 6 months. The following outcomes were evaluated: changes in the entropy value per unit area (pixel2) in the retinal pigment epithelium (RPE) on the B-scan image; changes in the entropy value in each stratified layer (retina, RPE, choroid) based on the ETDRS grid circle overlaid with en face entropy mapping, not only the whole ETDRS grid area but also a sector irradiated by the SMPL; and the relationship between edema reduction and entropy changes. RESULTS: A total of 11 eyes of 11 consecutive DME patients were enrolled. No visible signs of SMPL treatment were detected on PS-OCT images. The entropy value per unit area (pixel2) in the RPE tended to decrease at 3 and 6 months from baseline (35.8 ± 17.0 vs 26.1 ± 9.8, P = 0.14; vs 28.2 ± 18.3, P = 0.14). Based on the en face entropy mapping, the overall entropy value did not change in each layer in the whole ETDRS grid; however, decrease of entropy in the RPE was observed at 2, 3, and 6 months post-treatment within the SMPL-irradiated sectors (P < 0.01, each). There was a positive correlation between the change rate of retinal thickness and that of entropy in the RPE within the SMPL-irradiated sector at 6 months (r2 = 0.19, P = 0.039). CONCLUSION: Entropy measured using PS-OCT may be a new parameter that facilitates objective monitoring of SMPL-induced functional changes in the RPE that could not previously be assessed directly. This may contribute to a more promising therapeutic evaluation of DME. CLINICAL TRIAL: This clinical study was registered in UMIN-CTR (ID: UMIN000042420).

Ursodeoxycholic Acid Attenuates the Retinal Vascular Abnormalities in Anti-PDGFR-ß Antibody-Induced Pericyte Depletion Mouse Models.

As a clinical manifestations of diabetic retinopathy (DR), pericytes (PCs) loss from the capillary walls is thought to be an initial pathological change responsible for the breakdown of the blood-retinal barrier (BRB). This study was performed to investigate the effects of ursodeoxycholic acid (UDCA) in PC depletion mice by injection of an antibody against platelet-derived growth factor reception-ß (PDGFR-ß clone APB5). To assess the integrity of the retinal vessels, their density, diameters, vessel branching points, and number of acellular capillaries were evaluated. While all types of retinal vessels became enlarged in APB5-induced mice, treatment with UDCA rescued the vasculature; the vessel density, diameter of the veins and capillaries, and vessel branching points were significantly lower in mice treated with UDCA. Although APB5-induced mice displayed progressive exacerbation of retinal edema, whole retinal thickness upon treatment with UDCA was significantly decreased. Additionally, UDCA reduced the expression of F4/80+ macrophages in the APB5-induced retina according to immunofluorescent labeling. UDCA also reduced the increased expression of angiogenic factors and inflammatory mediators (vascular endothelial growth factor, intercellular adhesion molecule-1, and monocyte chemotactic protein-1). These findings suggest that UDCA can be used to prevent the progression of and treat DR.

The role of sphingosine 1-phosphate receptors on retinal pigment epithelial cells barrier function and angiogenic effects.

Sphingosine-1-phosphate (S1P) is a lysophospholipid mediator, promoting angiogenesis and inflammation via interactions with its receptors (S1P1-5), but the receptors and signaling pathways responsible for the progression of choroidal neovascularization (CNV) remain unknown. We investigated the roles of S1P/S1P receptors in RPE cells. ARPE-19 cells were treated with S1P dissolved in carrier proteins of albumin or apolipoprotein M (ApoM). The mRNA expression levels of interleukin-8 (IL-8), C-C motif chemokine ligand 2 (CCL2), and vascular endothelial growth factor (VEGF) were evaluated using quantitative real-time polymerase chain reaction. The protein level of hypoxia-inducible factor (HIF)-1α was assessed via enzyme-linked immunosorbent assay. HIF transcriptional activity was evaluated with a dual-reporter luciferase assay. Cellular barrier integrity was evaluated using transepithelial electrical resistance and the FITC-dextran permeability assay. The suppressive effect of an S1P antagonist on CNV progression was investigated with a laser-induced CNV model in mice. The increase in expression of IL-8, CCL2, and VEGF due to albumin-bound S1P was significantly mitigated by an S1P2 antagonist. The expression of HIF-1α significantly decreased with inhibition of S1P2 and S1P3. In addition, albumin-bound S1P disrupted the barrier integrity of retinal pigment epithelial cells via S1P2, whereas integrity was strengthened by ApoM-bound S1P. CNV lesions were significantly reduced in the mouse model with intravitreal injection of S1P2 antagonist. This study demonstrated that S1P significantly promotes angiogenesis, inflammation, and barrier integrity, which was attenuated by inhibition of S1P2 or S1P3, suggesting that regulation of S1P2 and S1P3 is a novel therapeutic target for CNV.

Development of a Spherical Model with a 3D Microchannel: An Application to Glaucoma Surgery.

Three-dimensional (3D) microfluidic channels, which simulate human tissues such as blood vessels, are useful in surgical simulator models for evaluating surgical devices and training novice surgeons. However, animal models and current artificial models do not sufficiently mimic the anatomical and mechanical properties of human tissues. Therefore, we established a novel fabrication method to fabricate an eye model for use as a surgical simulator. For the glaucoma surgery task, the eye model consists of a sclera with a clear cornea; a 3D microchannel with a width of 200-500 µm, representing the Schlemm's canal (SC); and a thin membrane with a thickness of 40-132 µm, representing the trabecular meshwork (TM). The sclera model with a clear cornea and SC was fabricated by 3D molding. Blow molding was used to fabricate the TM to cover the inner surface of the sclera part. Soft materials with controllable mechanical behaviors were used to fabricate the sclera and TM parts to mimic the mechanical properties of human tissues. Additionally, to simulate the surgery with constraints similar to those in a real operation, the eye model was installed on a skull platform. Therefore, in this paper, we propose an integration method for fabricating an eye model that has a 3D microchannel representing the SC and a membrane representing the TM, to develop a glaucoma model for training novice surgeons.

Autonomous Positioning of Eye Surgical Robot Using the Tool Shadow and Kalman Filtering.

Vitreoretinal surgery is one of the most difficult surgical operations, even for experienced surgeons. Thus, a master-slave eye surgical robot has been developed to assist the surgeon in safely performing vitreoretinal surgeries; however, in the master-slave control, the robotic positioning accuracy depends on the surgeon's coordination skills. This paper proposes a new method of autonomous robotic positioning using the shadow of the surgical instrument. First, the microscope image is segmented into three regions-namely, a micropipette, its shadow, and the eye ground-using a Gaussian mixture model (GMM). The tips of the micropipette and its shadow are then extracted from the contour lines of the segmented regions. The micropipette is then autonomously moved down to the simulated eye ground until the distance between the tips of micropipette and its shadow in the microscopic image reaches a predefined threshold. To handle possible occlusions, the tip of the shadow is estimated using a Kalman filter. Experiments to evaluate the robotic positioning accuracy in the vertical direction were performed. The results show that the autonomous positioning using the Kalman filter enhanced the accuracy of robotic positioning.

A surgical simulator for peeling the inner limiting membrane during wet conditions.

The present study was performed to establish a novel ocular surgery simulator for training in peeling of the inner limited membrane (ILM). This simulator included a next-generation artificial ILM with mechanical properties similar to the natural ILM that could be peeled underwater in the same manner as in actual surgery. An artificial eye consisting of a fundus and eyeball parts was fabricated. The artificial eye was installed in the eye surgery simulator. The fundus part was mounted in the eyeball, which consisted of an artificial sclera, retina, and ILM. To measure the thickness of the fabricated ILM on the artificial retina, we calculated the distance of the step height as the thickness of the artificial ILM. Two experienced ophthalmologists then assessed the fabricated ILM by sensory evaluation. The minimum thickness of the artificial ILM was 1.9 ± 0.3 µm (n = 3). We were able to perform the peeling task with the ILM in water. Based on the sensory evaluation, an ILM with a minimum thickness and 1000 degrees of polymerization was suitable for training. We installed the eye model on an ocular surgery simulator, which allowed for the performance of a sequence of operations similar to ILM peeling. In conclusion, we developed a novel ocular surgery simulator for ILM peeling. The artificial ILM was peeled underwater in the same manner as in an actual operation.