Kraft lignin fast (catalytic) pyrolysis for the production of high value-added chemicals (HVACs): A techno-economic screening of valorization pathways.

This paper presents a techno-economic analysis (TEA) of six (6) scenarios of the kraft lignin catalytic (CFP) and thermal (TFP) fast pyrolysis towards the production of high value-added chemicals (HVACs) and electric energy, based on experimental data from our previous work. ASPEN PLUS was used to simulate the proposed plants/scenarios and retrofitted custom-based economic models that were developed in Microsoft EXCEL. The results showed that scenarios 1 and 2 in which the produced bio-oil is used as fuel for electricity production are the most cost-deficient. On the other hand, scenarios 3 and 6 that utilize the light bio-oil fraction to recover distinct HVACs, along with the use of heavier fractions for electricity production, have showed a significant investment viability, since profitability measures are high. Furthermore, scenarios 4 and 5 that refer to the recovery of mixtures (fractions) of HVACs, are considered an intermediate investment option due to the reduced cost of separation. All the proposed scenarios have a substantial total capital investment (TCI) which ranges from 135 MM€ (scenario 4) to 380 MM€ (scenario 6) with a Lang factor of 6.08, which shows that the CAPEX results are within reason. As far as the comparison of lignin CFP and TFP goes, it is shown that lignin CFP leads to the production of aromatic and phenolic monomers which have a substantial market value, while TFP can lead to important value-added chemicals with a lower OPEX than CFP. A target of return of investment (ROI) of 32% has been set for the selling prices of the HVACs. In summary, this study aims at listing and assessing a set of economic indicators for industrial size plants that use lignin CFP and TFP towards the production of high value-added chemicals and energy production and to provide simulation data for comparative analysis of three bio-oil separation methods, i.e. distillation, liquid-liquid extraction and moving bed chromatography.

Comparative Study of the U(VI) Adsorption by Hybrid Silica-Hyperbranched Poly(ethylene imine) Nanoparticles and Xerogels.

Two different silica conformations (xerogels and nanoparticles), both formed by the mediation of dendritic poly (ethylene imine), were tested at low pHs for problematic uranyl cation sorption. The effect of crucial factors, i.e., temperature, electrostatic forces, adsorbent composition, accessibility of the pollutant to the dendritic cavities, and MW of the organic matrix, was investigated to determine the optimum formulation for water purification under these conditions. This was attained with the aid of UV-visible and FTIR spectroscopy, dynamic light scattering (DLS), ζ-potential, liquid nitrogen (LN2) porosimetry, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Results highlighted that both adsorbents have extraordinary sorption capacities. Xerogels are cost-effective since they approximate the performance of nanoparticles with much less organic content. Both adsorbents could be used in the form of dispersions. The xerogels, though, are more practicable materials since they may penetrate the pores of a metal or ceramic solid substrate in the form of a precursor gel-forming solution, producing composite purification devices.

Propensity and appraisal of biochar performance in removal of oil spills: A comprehensive review.

Recently, the adsorption-based environmental remediation techniques have gained a considerable attention, due to their economic viability and simplicity over other methods. Hence, detailed presentation and analysis were herein focused on describing the role of biochar in oil spill removal. Oil removal by utilizing biochar is assumed as a green-oriented concept. Biochar is a carbon-rich low-cost material with high porosity and specific surface chemistry, with a tremendous potentiality for oil removal from aqueous solutions. Oil sorption properties of biochar mainly depend on the biochar production/synthesis method, and the biomass feedstock type. In order to preserve the stability of functional groups in the structure, biochar needs to be produced/activated at low temperatures (<700 ᵒC). In general, biochar derived from biomass containing high lignin content via slow pyrolysis is more favorable for oil removal. Exceptional characteristics of biochar which intensify the oil removal capability such as hydrophobicity, oleophilicity or/and specific contaminant-surface interaction of biochar can be enhanced and be tuned by chemical and physical activation methods. Considering all the presented results, future perspectives such as the examination of biochar efficacy on oil removal efficiency in multi-element contaminated aqueous solutions to identify the best biomass feedstocks, the production protocols and large-scale field trials, are also discussed.

Cultivation, characterization, and properties of Chlorella vulgaris microalgae with different lipid contents and effect on fast pyrolysis oil composition.

A systematic study of the effect of nitrogen levels in the cultivation medium of Chlorella vulgaris microalgae grown in photobioreactor (PBR) on biomass productivity, biochemical and elemental composition, fatty acid profile, heating value (HHV), and composition of the algae-derived fast pyrolysis (bio-oil) is presented in this work. A relatively high biomass productivity and cell concentration (1.5 g of dry biomass per liter of cultivation medium and 120 × 106 cells/ml, respectively) were achieved after 30 h of cultivation under N-rich medium. On the other hand, the highest lipid content (ca. 36 wt.% on dry biomass) was obtained under N-depletion cultivation conditions. The medium and low N levels favored also the increased concentration of the saturated and mono-unsaturated C16:0 and C18:1(n-9) fatty acids (FA) in the lipid/oil fraction, thus providing a raw lipid feedstock that can be more efficiently converted to high-quality biodiesel or green diesel (via hydrotreatment). In terms of overall lipid productivity, taking in consideration both the biomass concentration in the medium and the content of lipids on dry biomass, the most effective system was the N-rich one. The thermal (non-catalytic) pyrolysis of Chlorella vulgaris microalgae produced a highly complex bio-oil composition, including fatty acids, phenolics, ethers, ketones, etc., as well as aromatics, alkanes, and nitrogen compounds (pyrroles and amides), originating from the lipid, protein, and carbohydrate fractions of the microalgae. However, the catalytic fast pyrolysis using a highly acidic ZSM-5 zeolite, afforded a bio-oil enriched in mono-aromatics (BTX), reducing at the same time significantly oxygenated compounds such as phenolics, acids, ethers, and ketones. These effects were even more pronounced in the catalytic fast pyrolysis of Chlorella vulgaris residual biomass (after extraction of lipids), thus showing for the first time the potential of transforming this low value by-product towards high added value platform chemicals.

PLGA/SBA-15 mesoporous silica composite microparticles loaded with paclitaxel for local chemotherapy.

In this work, high surface area mesoporous silica (SBA-15) was loaded with paclitaxel (taxol, PTX) and was further entrapped into poly(lactic acid-co-glycolic acid) (PLGA) microparticles (MPs). A modified solvent evaporation-emulsion method was used in order to formulate the composite microparticles with sizes of 8-12µm. PTX loaded SBA-15 as well as the PLGA/PTX-SBA-15 composites were characterized in terms of their morphology, crystal structure and thermal properties. Drug content, loading efficiency, particle size and the in-vitro drug release kinetics of the PLGA/PTΧ-SBA-15 microspheres were also investigated. The in vitro release studies were carried out using Simulated Body Fluid (SBF) at 37°C revealing that the prepared formulations present higher dissolution rate than pure PTX and sustained pattern which is ideal for anticancer carriers. Modeling and data analysis of the in vitro drug release was also investigated. It was also shown that all microparticles have low cytotoxicity in HUVE cells. Finally, it was found that drug loaded microparticles are very effective in Human Cervical Adenocarcinoma (HeLa) cells.