Melt electrowriting of poly(ε-caprolactone) - poly(ethylene glycol) backbone polymer blend scaffolds with improved hydrophilicity and functionality.

Melt electrowriting (MEW) is an additive manufacturing technique that harnesses electro-hydrodynamic phenomena to produce 3D-printed fibres with diameters on the scale of 10's of microns. The ability to print at this small scale provides opportunities to create structures with incredibly fine resolution and highly defined morphology. The current gold standard material for MEW is poly(ε-caprolactone) (PCL), a polymer with excellent biocompatibility but lacking in chemical groups that can allow intrinsic additional functionality. To provide this functionality while maintaining PCL's positive attributes, blending was performed with a Poly(Ethylene Glycol) (PEG)-based Acrylate endcapped Urethane-based Precursor (AUP). AUPs are a group of polymers, built on a backbone of existing polymers, which introduce additional functionality by the addition of one or more acrylate groups that terminate the polymer chain of a backbone polymer. By blending with a 20kDa AUP-PEG in small amounts, it is shown that MEW attributes are preserved, producing high-quality meshes. Blends were produced in various PCL:AUP weight ratios (100:0, 90:10 and 0:100) and processed into both solvent-cast films and MEW meshes that were used to characterise the properties of the blends. It was found that the addition of AUP-PEG to PCL significantly increases the hydrophilicity of structures produced with these polymers, and adds swelling capability compared to the non-swelling PCL. The developed blend (90:10) is shown to be processable using MEW, and the quality of manufactured scaffolds is evaluated against pure PCL scaffolds by performing scanning electron microscopy image analysis, with the quality of the novel MEW blend scaffolds showing comparable quality to that of pure PCL. The presence of the functionalisable AUP material on the surface of the developed scaffolds is also confirmed using fluorescence labelling of the acrylate groups. Biocompatibility of the MEW-processable blend was confirmed through a cell viability study, which found a high degree of cytocompatibility.

Cotton Fabric-Reinforced Hydrogels with Excellent Mechanical and Broad-Spectrum Photothermal Antibacterial Properties.

Antibacterial hydrogel wound dressings hold great potential in eliminating bacteria and accelerating the healing process. However, it remains a challenge to fabricate hydrogel wound dressings that simultaneously exhibit excellent mechanical and photothermal antibacterial properties. Here we report the development of polydopamine-functionalized graphene oxide (rGO@PDA)/calcium alginate (CA)/Polypyrrole (PPy) cotton fabric-reinforced hydrogels (abbreviated as rGO@PDA/CA/PPy FHs) for tackling bacterial infections. The mechanical properties of hydrogels were greatly enhanced by cotton fabric reinforcement and an interpenetrating structure, while excellent broad-spectrum photothermal antibacterial properties based on the photothermal effect were obtained by incorporating PPy and rGO@PDA. Results indicated that rGO@PDA/CA/PPy FHs exhibited superior tensile strength in both the warp (289 ± 62.1 N) and weft directions (142 ± 23.0 N), similarly to cotton fabric. By incorporating PPy and rGO@PDA, the swelling ratio was significantly decreased from 673.5% to 236.6%, while photothermal conversion performance was significantly enhanced with a temperature elevated to 45.0 °C. Due to the synergistic photothermal properties of rGO@PDA and PPy, rGO@PDA/CA/PPy FHs exhibited excellent bacteria-eliminating efficiency for S. aureus (0.57%) and E. coli (3.58%) after exposure to NIR for 20 min. We believe that the design of fabric-reinforced hydrogels could serve as a guideline for developing hydrogel wound dressings with improved mechanical properties and broad-spectrum photothermal antibacterial properties for infected-wound treatment.

Gelatin-Based Hybrid Hydrogels as Matrices for Organoid Culture.

The application of liver organoids is very promising in the field of liver tissue engineering; however, it is still facing some limitations. One of the current major limitations is the matrix in which they are cultured. The mainly undefined and murine-originated tumor matrices derived from Engelbreth-Holm-Swarm (EHS) sarcoma, such as Matrigel, are still the standard culturing matrices for expansion and differentiation of organoids toward hepatocyte-like cells, which will obstruct its future clinical application potential. In this study, we exploited the use of newly developed highly defined hydrogels as potential matrices for the culture of liver organoids and compared them to Matrigel and two hydrogels that were already researched in the field of organoid research [i.e., polyisocyanopeptides, enriched with laminin-entactin complex (PIC-LEC) and gelatin methacryloyl (GelMA)]. The newly developed hydrogels are materials that have a physicochemical resemblance with native liver tissue. Norbornene-modified dextran cross-linked with thiolated gelatin (DexNB-GelSH) has a swelling ratio and macro- and microscale properties that highly mimic liver tissue. Norbornene-modified chondroitin sulfate cross-linked with thiolated gelatin (CSNB-GelSH) contains chondroitin sulfate, which is a glycosaminoglycan (GAG) that is present in the liver ECM. Furthermore, CSNB-GelSH hydrogels with different mechanical properties were evaluated. Bipotent intrahepatic cholangiocyte organoids (ICOs) were applied in this work and encapsulated in these materials. This research revealed that the newly developed materials outperformed Matrigel, PIC-LEC, and GelMA in the differentiation of ICOs toward hepatocyte-like cells. Furthermore, some trends indicate that an interplay of both the chemical composition and the mechanical properties has an influence on the relative expression of certain hepatocyte markers. Both DexNB-GelSH and CSNB-GelSH showed promising results for the expansion and differentiation of intrahepatic cholangiocyte organoids. The stiffest CSNB-GelSH hydrogel even significantly outperformed Matrigel based on ALB, BSEP, and CYP3A4 gene expression, being three important hepatocyte markers.

Bottom-Up Extrusion-Based Biofabrication of the Osteoid Niche.

Bone regeneration remains a clinical challenge given the transplantation incidence rate and the associated economic burden. Bottom-up osteoid tissue engineering has the potential to offer an alternative approach to current clinical solutions that suffer from various drawbacks. In this paper, deposition-based bioprinting is exploited while the effect is explored of both the crosslinking mechanism (gelatin methacryloyl (GelMA) versus gelatin norbornene (DS 91) crosslinked with thiolated gelatin (GelNBSH)) and the degree of substitution (GelNBSH versus norbornene-norbornene-modified gelatin (DS 169) crosslinked with thiolated gelatin (GelNBNBSH)) on the presented biophysical cues as well as on the osteogenic differentiation. The incorporation of tris(2-carboxyethyl)phosphine (TCEP) to the step-growth inks allows the production of reproducible and biocompatible scaffolds based on thiol-ene chemistry. Dental pulp stem cell encapsulation in GelNBNBSH biofabricated constructs shows a favorable response due to the combination of its stress relaxation and substrate rigidity (bulk compressive modulus of 11-30 kPa) as reflected by a sevenfold increase in calcium production compared to the tissue engineering standard GelMA. This work is the first to exploit a controlled biocompatible and cell-interactive thiolated macromolecular crosslinker (GelSH + TCEP) allowing the extrusion-based biofabrication of low concentration (5 w/v%) modified osteogenic gelatin-based inks (GelNBNBSH + TCEP).

Effect of Poly(Vinyl Pyrrolidone) on Iodine Release from Acrylate-Endcapped Urethane-Based Poly(Ethylene Glycol) Hydrogels as Antibacterial Wound Dressing.

Infections are still a major cause of morbidity in burn wounds. Although silver has been used strongly in past centuries as an anti-bacterial, it can lead to allergic reactions, bacterial resistance, and delayed wound healing. Iodine-based antibacterials are becoming an interesting alternative. In this work, the effect of complexation with poly(vinyl pyrrolidone) (PVP) and poly(ethylene oxide) (PEO)-based polymers is explored by using different acrylate-endcapped urethane-based poly(ethylene glycol) (AUP) polymers, varying the molar mass (MM) of the poly(ethylene glycol) (PEG) backbone, with possible addition of PVP. The higher MM AUP outperforms the swelling potential of commercial wound dressings such as Kaltostat, Aquacel Ag, and Hydrosorb and all MM show superior mechanical properties. The addition of iodine to the polymers is compared to Iso-Betadine Tulle (IBT). Interestingly, the addition of PVP does not lead to increased iodine complexation compared to the blank AUP polymers, while all have a prolonged iodine release compared to the IBT, which leads to a burst release. The observed prolonged release also leads to larger inhibition zones during antibacterial tests. Complexing iodine in AUP polymers with or without PVP leads to antimicrobial wound dressings which may hold potential for future application to treat infected wounds.

A preclinical platform for assessing long-term drug efficacy exploiting mechanically tunable scaffolds colonized by a three-dimensional tumor microenvironment.

BACKGROUND: Long-term drug evaluation heavily relies upon rodent models. Drug discovery methods to reduce animal models in oncology may include three-dimensional (3D) cellular systems that take into account tumor microenvironment (TME) cell types and biomechanical properties. METHODS: In this study we reconstructed a 3D tumor using an elastic polymer (acrylate-endcapped urethane-based poly(ethylene glycol) (AUPPEG)) with clinical relevant stiffness. Single cell suspensions from low-grade serous ovarian cancer (LGSOC) patient-derived early passage cultures of cancer cells and cancer-associated fibroblasts (CAF) embedded in a collagen gel were introduced to the AUPPEG scaffold. After self-organization in to a 3D tumor, this model was evaluated by a long-term (> 40 days) exposure to a drug combination of MEK and HSP90 inhibitors. The drug-response results from this long-term in vitro model are compared with drug responses in an orthotopic LGSOC xenograft mouse model. RESULTS: The in vitro 3D scaffold LGSOC model mimics the growth ratio and spatial organization of the LGSOC. The AUPPEG scaffold approach allows to test new targeted treatments and monitor long-term drug responses. The results correlate with those of the orthotopic LGSOC xenograft mouse model. CONCLUSIONS: The mechanically-tunable scaffolds colonized by a three-dimensional LGSOC allow long-term drug evaluation and can be considered as a valid alternative to reduce, replace and refine animal models in drug discovery.

Effect of molar mass and alkyl chain length on the surface properties and biocompatibility of poly(alkylene terephthalate)s for potential cardiovascular applications.

Cardiovascular diseases are the leading cause of death worldwide. Treatments for occluded arteries include balloon angioplasty with or without stenting and bypass grafting surgery. Poly(ethylene terephthalate) is frequently used as a vascular graft material, but its high stiffness leads to compliance mismatch with the human blood vessels, resulting in altered hemodynamics, thrombus formation and graft failure. Poly(alkylene terephthalate)s (PATs) with longer alkyl chain lengths hold great potential for improving the compliance. In this work, the effect of the polymer molar mass and the alkyl chain length on the surface roughness and wettability of spin-coated PAT films was investigated, as well as the endothelial cell adhesion and proliferation on these samples. We found that surface roughness generally increases with increasing molar mass and alkyl chain length, while no trend for the wettability could be observed. All investigated PATs are non-cytotoxic and support endothelial cell adhesion and growth. For some PATs, the endothelial cells even reorganized into a tubular-like structure, suggesting angiogenic maturation. In conclusion, this research demonstrates the biocompatibility of PATs and their potential to be applied as materials serving cardiovascular applications.

Vascularized adipose tissue engineering: moving towards soft tissue reconstruction.

Soft tissue defects are a common clinical challenge mostly caused by trauma, congenital anomalies and oncological surgery. Current soft tissue reconstruction options include synthetic materials (fillers and implants) and autologous adipose tissue transplantation through flap surgery and/or lipotransfer. Both reconstructive options hold important disadvantages to which vascularized adipose tissue engineering (VATE) strategies could offer solutions. In this review, we first summarized pivotal characteristics of functional adipose tissue such as the structure, function, cell types, development and extracellular matrix (ECM). Next, we discussed relevant cell sources and how they are applied in different state-of-the-art VATE techniques. Herein, biomaterial scaffolds and hydrogels, ECMs, spheroids, organoids, cell sheets, three dimensional printing and microfluidics are overviewed. Also, we included extracellular vesicles and emphasized their potential role in VATE. Lastly, current challenges and future perspectives in VATE are pointed out to help to pave the road towards clinical applications.

Nature-Inspired Dual Purpose Strategy toward Cell-Adhesive PCL Networks: C(-linker-)RGD Incorporation via Thiol-ene Crosslinking.

In an attempt to mimic nature's ability to adhere cells, PCL is often coated with nature-derived polymers or its surface is functionalized with a cell-binding motif. However, said surface modifications are limited to the material's surface, include multiple steps, and are mediated by harsh conditions. Here, we introduce a single-step strategy toward cell-adhesive polymer networks where thiol-ene chemistry serves a dual purpose. First, alkene-functionalized PCL is crosslinked by means of a multifunctional thiol. Second, by means of a cysteine coupling site, the cell-binding motif C(-linker-)RGD is covalently bound throughout the PCL networks during crosslinking. Moreover, the influence of various linkers (type and length), between the cysteine coupling site and the cell-binding motif RGD, is investigated and the functionalization is assessed by means of static contact angle measurements and X-ray photoelectron spectroscopy. Finally, successful introduction of cell adhesiveness is illustrated for the networks by seeding fibroblasts onto the functionalized PCL networks.

Fine-Tuning the Endcap Chemistry of Acrylated Poly(Ethylene Glycol)-Based Hydrogels for Efficient Burn Wound Exudate Management.

Most commercial dressings with moderate to high exudate uptake capacities are mechanically weaker and/or require a secondary dressing. The current research article focuses on the development of hydrogel-based wound dressings combining mechanical strength with high exudate absorption capacities using acrylate-endcapped urethane-based precursors (AUPs). AUPs with varying poly(ethylene glycol) backbone molar masses (10 and 20 kg mol-1 ) and endcap chemistries are successfully synthesized in toluene, subsequently processed into UV-cured hydrogel sheets and are benchmarked against several commercial wound dressings (Hydrosorb, Kaltostat, and Mepilex Ag). The AUP materials show high gel fractions (>90%) together with strong swelling degrees in water, phosphate buffered saline and simulated wound fluid (12.7-19.6 g g-1 ), as well as tunable mechanical properties (e.g., Young's modulus: 0.026-0.061 MPa). The AUPs have significantly (p < 0.05) higher swelling degrees than the tested commercial dressings, while also being mechanically resistant. The elasticity of the synthesized materials leads to an increased resistance against fatigue. The di- and hexa-acrylated AUPs show excellent in vitro biocompatibility against human foreskin fibroblasts, as evidenced by indirect MTS assays and live/dead cell assays. In conclusion, the processed AUP materials demonstrate high potential for wound healing application and can even compete with commercially available dressings.

Pharmacokinetics of Intramuscularly Administered Thermoresponsive Polymers.

Aqueous solutions of some polymers exhibit a lower critical solution temperature (LCST); that is, they form phase-separated aggregates when heated above a threshold temperature. Such polymers found many promising (bio)medical applications, including in situ thermogelling with controlled drug release, polymer-supported radiotherapy (brachytherapy), immunotherapy, and wound dressing, among others. Yet, despite the extensive research on medicinal applications of thermoresponsive polymers, their biodistribution and fate after administration remained unknown. Thus, herein, they studied the pharmacokinetics of four different thermoresponsive polyacrylamides after intramuscular administration in mice. In vivo, these thermoresponsive polymers formed depots that subsequently dissolved with a two-phase kinetics (depot maturation, slow redissolution) with half-lives 2 weeks to 5 months, as depot vitrification prolonged their half-lives. Additionally, the decrease of TCP of a polymer solution increased the density of the intramuscular depot. Moreover, they detected secondary polymer depots in the kidneys and liver; these secondary depots also followed two-phase kinetics (depot maturation and slow dissolution), with half-lives 8 to 38 days (kidneys) and 15 to 22 days (liver). Overall, these findings may be used to tailor the properties of thermoresponsive polymers to meet the demands of their medicinal applications. Their methods may become a benchmark for future studies of polymer biodistribution.

Flexor tendon repair using a reinforced tubular, medicated electrospun construct.

A reinforced tubular, medicated electrospun construct was developed for deep flexor tendon repair. This construct combines mechanical strength with the release of anti-inflammatory and anti-adhesion drugs. In this study, the reinforced construct was evaluated using a rabbit model. It was compared to its components (a tubular, medicated electrospun polymer without reinforcement and a tubular braid as such) on the one hand to a modified Kessler suture as a control group. Forty New Zealand rabbits were randomly divided into two groups. Surgery was performed in the second and fourth deep flexor tendons of one hind paw of the rabbits in the two groups using four repair techniques. Biomechanical tensile testing and macroscopic and histological evaluations were performed at 3 and 8 weeks postoperatively. A two-way analysis of variance with pairwise comparisons revealed that the three experimental surgical techniques (a reinforced tubular medicated electrospun construct, tubular-medicated construct, and tubular braid as such) showed similar strength as that of a modified Kessler suture repair, which was characterized by a mean load at ultimate failure of 19.85 N (standard deviation [SD] 5.29 N) at 3 weeks and 18.15 N (SD 8.01 N) at 8 weeks. Macroscopically, a significantly different adhesion pattern was observed at the suture knots, either centrally or peripherally, depending on the technique. Histologically, a qualitative assessment showed good to excellent repair at the tendon repair site, irrespective of the applied technique. This study demonstrates that mechanical and biological repair strategies for flexor tendon repair can be successfully combined.

Toward Adipose Tissue Engineering Using Thiol-Norbornene Photo-Crosslinkable Gelatin Hydrogels.

Nowadays, breast implants, lipofilling, and microsurgical free tissue transfer are the most often applied procedures to repair soft tissue defects resulting from mastectomies/lumpectomies following breast cancer. Due to the drawbacks and limitations associated with these conventional clinical practices, there is a need for alternative reconstructive strategies. The development of biomimetic materials able to promote cell proliferation and adipogenic differentiation has gained increasing attention in the context of adipose reconstructive purposes. Herein, thiol-norbornene crosslinkable gelatin-based materials were developed and benchmarked to the current commonly applied methacryloyl-modified gelatin (GelMA) with different degrees of substitutions focussing on bottom-up tissue engineering. The developed hydrogels resulted in similar gel fractions, swelling, and in vitro biodegradation properties compared to the benchmark materials. Furthermore, the thiol-ene hydrogels exhibited mechanical properties closer to those of native fatty tissue compared to GelMA. The mechanical cues of the equimolar GelNB DS55% + GelSH DS75% composition resulted not only in similar biocompatibility but also, more importantly, in superior differentiation of the encapsulated cells into the adipogenic lineage, as compared to GelMA. It can be concluded that the photo-crosslinkable thiol-ene systems offer a promising strategy toward adipose tissue engineering through cell encapsulation compared to the benchmark GelMA.

Design and development of a reinforced tubular electrospun construct for the repair of ruptures of deep flexor tendons.

This research aims at developing a more potent solution for deep flexor tendon repair by combining a mechanical and biological approach. A reinforced, multi-layered electrospun tubular construct is developed, composed of three layers: an inner electrospun layer containing an anti-inflammatory component (Naproxen), a middle layer of braided monofilament as reinforcement and an outer electrospun layer containing an anti-adhesion component (hyaluronic acid, HA). In a first step, a novel acrylate endcapped urethane-based precursor (AUP) is developed and characterized by measuring molar mass, acrylate content and thermo-stability. The AUP material is benchmarked against commercially available poly(ε-caprolactone) (PCL). Next, the materials are processed into multi-layered, tubular constructs with bio-active components (Naproxen and HA) using electrospinning. In vitro assays using human fibroblasts show that incorporation of the bio-active components is successful and not-cytotoxic. Moreover, tensile testing using ex vivo sheep tendons prove that the developed multi-layered constructs fulfill the required strength for tendon repair (i.e. 2.79-3.98 MPa), with an ultimate strength of 8.56 ±â€¯1.92 MPa and 8.36 ±â€¯0.57 MPa for PCL and AUP/PCL constructs respectively. In conclusion, by combining a mechanical approach (improved mechanical properties) with the incorporation of bio-active compounds (biological approach), this solution shows its potential for application in deep flexor tendon repair.

High-throughput fabrication of vascularized adipose microtissues for 3D bioprinting.

For patients with soft tissue defects, repair with autologous in vitro engineered adipose tissue could be a promising alternative to current surgical therapies. A volume-persistent engineered adipose tissue construct under in vivo conditions can only be achieved by early vascularization after transplantation. The combination of 3D bioprinting technology with self-assembling microvascularized units as building blocks can potentially answer the need for a microvascular network. In the present study, co-culture spheroids combining adipose-derived stem cells (ASC) and human umbilical vein endothelial cells (HUVEC) were created with an ideal geometry for bioprinting. When applying the favourable seeding technique and condition, compact viable spheroids were obtained, demonstrating high adipogenic differentiation and capillary-like network formation after 7 and 14 days of culture, as shown by live/dead analysis, immunohistochemistry and RT-qPCR. Moreover, we were able to successfully 3D bioprint the encapsulated spheroids, resulting in compact viable spheroids presenting capillary-like structures, lipid droplets and spheroid outgrowth after 14 days of culture. This is the first study that generates viable high-throughput (pre-)vascularized adipose microtissues as building blocks for bioprinting applications using a novel ASC/HUVEC co-culture spheroid model, which enables both adipogenic differentiation while simultaneously supporting the formation of prevascular-like structures within engineered tissues in vitro.

Bioprinting predifferentiated adipose-derived mesenchymal stem cell spheroids with methacrylated gelatin ink for adipose tissue engineering.

The increasing number of mastectomies results in a greater demand for breast reconstruction characterized by simplicity and a low complication profile. Reconstructive surgeons are investigating tissue engineering (TE) strategies to overcome the current surgical drawbacks. 3D bioprinting is the rising technique for the fabrication of large tissue constructs which provides a potential solution for unmet clinical needs in breast reconstruction building on decades of experience in autologous fat grafting, adipose-derived mesenchymal stem cell (ASC) biology and TE. A scaffold was bioprinted using encapsulated ASC spheroids in methacrylated gelatin ink (GelMA). Uniform ASC spheroids with an ideal geometry and diameter for bioprinting were formed, using a high-throughput non-adhesive agarose microwell system. ASC spheroids in adipogenic differentiation medium (ADM) were evaluated through live/dead staining, histology (HE, Oil Red O), TEM and RT-qPCR. Viable spheroids were obtained for up to 14 days post-printing and showed multilocular microvacuoles and successful differentiation toward mature adipocytes shown by gene expression analysis. Moreover, spheroids were able to assemble at random in GelMA, creating a macrotissue. Combining the advantage of microtissues to self-assemble and the controlled organization by bioprinting technologies, these ASC spheroids can be useful as building blocks for the engineering of soft tissue implants.

Evaluation of 3D Printed Gelatin-Based Scaffolds with Varying Pore Size for MSC-Based Adipose Tissue Engineering.

Adipose tissue engineering aims to provide solutions to patients who require tissue reconstruction following mastectomies or other soft tissue trauma. Mesenchymal stromal cells (MSCs) robustly differentiate into the adipogenic lineage and are attractive candidates for adipose tissue engineering. This work investigates whether pore size modulates adipogenic differentiation of MSCs toward identifying optimal scaffold pore size and whether pore size modulates spatial infiltration of adipogenically differentiated cells. To assess this, extrusion-based 3D printing is used to fabricate photo-crosslinkable gelatin-based scaffolds with pore sizes in the range of 200-600 µm. The adipogenic differentiation of MSCs seeded onto these scaffolds is evaluated and robust lipid droplet formation is observed across all scaffold groups as early as after day 6 of culture. Expression of adipogenic genes on scaffolds increases significantly over time, compared to TCP controls. Furthermore, it is found that the spatial distribution of cells is dependent on the scaffold pore size, with larger pores leading to a more uniform spatial distribution of adipogenically differentiated cells. Overall, these data provide first insights into the role of scaffold pore size on MSC-based adipogenic differentiation and contribute toward the rational design of biomaterials for adipose tissue engineering in 3D volumetric spaces.

Extrusion-based 3D printing of photo-crosslinkable gelatin and κ-carrageenan hydrogel blends for adipose tissue regeneration.

Current soft tissue repair techniques for women with breast cancer remain associated with several drawbacks including surgical complications and a high resorption rate for lipofilling techniques. Hence, the need to develop improved adipose tissue reconstruction strategies. Additive manufacturing can be a promising tool towards the development of patient-specific scaffolds which are able to support adipose tissue engineering. In the present work, scaffolds composed of both methacrylamide-modified gelatin (Gel-MA) and methacrylated κ-carrageenan (Car-MA), i.e. hydrogel blends, were developed using extrusion-based 3D printing in order to establish a close resemblance to the native extracellular matrix. The hydrogel blends were benchmarked to scaffolds constituting of only Gel-MA. Our results indicate that both types of scaffolds remain stable over time (21 days), are able to absorb large amounts of water and exhibit mechanical properties comparable to those of native breast tissue (2 kPa). Furthermore, a similar cell viability (> 90%) and proliferation rate after 14 days was obtained for adipose tissue-derived stem cells (ASCs) upon seeding onto both types of scaffolds. Additionally, the ASCs were able to differentiate into the adipogenic lineage on the hydrogel blend scaffolds, although their differentiation potential was lower compared to that of ASCs seeded onto the Gel-MA scaffolds.

Collagen-Based Tissue Engineering Strategies for Vascular Medicine.

Cardiovascular diseases (CVDs) account for the 31% of total death per year, making them the first cause of death in the world. Atherosclerosis is at the root of the most life-threatening CVDs. Vascular bypass/replacement surgery is the primary therapy for patients with atherosclerosis. The use of polymeric grafts for this application is still burdened by high-rate failure, mostly caused by thrombosis and neointima hyperplasia at the implantation site. As a solution for these problems, the fast re-establishment of a functional endothelial cell (EC) layer has been proposed, representing a strategy of crucial importance to reduce these adverse outcomes. Implant modifications using molecules and growth factors with the aim of speeding up the re-endothelialization process has been proposed over the last years. Collagen, by virtue of several favorable properties, has been widely studied for its application in vascular graft enrichment, mainly as a coating for vascular graft luminal surface and as a drug delivery system for the release of pro-endothelialization factors. Collagen coatings provide receptor-ligand binding sites for ECs on the graft surface and, at the same time, act as biological sealants, effectively reducing graft porosity. The development of collagen-based drug delivery systems, in which small-molecule and protein-based drugs are immobilized within a collagen scaffold in order to control their release for biomedical applications, has been widely explored. These systems help in protecting the biological activity of the loaded molecules while slowing their diffusion from collagen scaffolds, providing optimal effects on the targeted vascular cells. Moreover, collagen-based vascular tissue engineering substitutes, despite not showing yet optimal mechanical properties for their use in the therapy, have shown a high potential as physiologically relevant models for the study of cardiovascular therapeutic drugs and diseases. In this review, the current state of the art about the use of collagen-based strategies, mainly as a coating material for the functionalization of vascular graft luminal surface, as a drug delivery system for the release of pro-endothelialization factors, and as physiologically relevant in vitro vascular models, and the future trend in this field of research will be presented and discussed.

Screening of two-photon activated photodynamic therapy sensitizers using a 3D osteosarcoma model.

Photodynamic therapy (PDT) involves a photosensitizing agent activated with light to induce cell death. Two-photon excited PDT (TPE-PDT) offers numerous benefits compared to traditional one-photon induced PDT, including an increased penetration depth and precision. However, the in vitro profiling and comparison of two-photon photosensitizers (PS) are still troublesome. Herein, we report the development of an in vitro screening platform of TPE-PS using a 3D osteosarcoma cell culture. The platform was tested using three different two-photon (2P) active compounds - a 2P sensitizer P2CK, a fluorescent dye Eosin Y, and a porphyrin derivative (TPP). Their 2P absorption cross-sections (σ2PA) were characterised using a fully automated z-scan setup. TPP exhibited a remarkably high σ2PA at 720 nm (8865 GM) and P2CK presented a high absorption at 850 nm (405 GM), while Eosin Y had the lowest 2P absorption at the studied wavelengths (<100 GM). The cellular uptake of PS visualized using confocal laser scanning microscopy showed that both TPP and P2CK were internalized by the cells, while Eosin Y stayed mainly in the surrounding media. The efficiency of the former two TPE-PS was quantified using the PrestoBlue metabolic assay, showing a significant reduction in cell viability after two-photon irradiation. The possibility of damage localization was demonstrated using a co-culture of adipose derived stem cells together with osteosarcoma spheroids showing no signs of damage to the surrounding healthy cells after TPE-PDT.