Methods for three-dimensional characterization of the acetabulum prior to pelvic reorientation osteotomy: a scoping review.

Periacetabular osteotomy is the gold standard treatment for acetabular dysplasia. The great variability of acetabular dysplasia requires a personalized preoperative planning improved by 3D reconstruction and computer-assisted surgery. To plan the displacement of the acetabular fragment by a pelvic osteotomy, it is necessary to define a reference plane and a method to characterize 3D acetabular orientation. A scoping review was performed on PubMed to search for articles with a method to characterize the acetabulum of native hips in a 3D reference frame. Ninety-eight articles out of 3815 reports were included. Three reproducible reference planes were identified: the anterior pelvic plane, the Standardization and Terminology Committee plane used in gait analysis, and the sacral base plane. The different methods for 3D analysis of the acetabulum were divided in four groups: global orientation, triplanar measurements, segmentation, and surface coverage of the femoral head. Two methods were found appropriate for reorientation osteotomies: the global orientation by a vector method and the triplanar method. The global orientation method relies on the creation of a vector from the acetabular rim, from the acetabular surface or from successive planes. Normalization of the global acetabular vector would correct acetabular dysplasia by a single alignment maneuver on an ideal vector. The triplanar method, based on angle measurements at the center of the femoral head, would involve correction of anomalies by considering axial, frontal, and sagittal planes. Although not directly fit for reorientation, the two others would help to candidate patients and verify both planning and postoperative result.

The Impact of Pelvic Incidence on Spinopelvic and Hip Alignment and Mobility in Asymptomatic Subjects.

BACKGROUND: The influence of pelvic incidence (PI) on spinopelvic and hip alignment and mobility has not been well investigated. The aim of this study was to evaluate the influence of PI on spinopelvic and hip alignment and mobility, including the pelvic-femoral angle (PFA) and motion (ΔPFA), in functional positions in a cohort of asymptomatic volunteers. METHODS: This was a single-center, prospective, cross-sectional study. We included 136 healthy volunteers (69% female; mean age, 38 ± 11 years; mean body mass index, 22 ± 3 kg/m2) divided into 3 subgroups on the basis of their PI: PI < 45° (low PI), 45° ≤ PI ≤ 60° (medium PI), and PI > 60° (high PI). We made full-body lateral radiographs in free-standing, standing with extension, relaxed-seated, and flexed-seated positions. We measured the sacral slope (SS), lumbar lordosis (LL), and PFA. We calculated lumbar (∆LL), pelvic (∆SS), and hip (∆PFA) mobilities as the change between the standing (i.e., standing with or without extension) and sitting (i.e., relaxed-seated or flexed-seated) positions. RESULTS: There were significant differences between some of the 3 subgroups with respect to the LL, SS, and PFA in each of the 4 positions. There were no significant differences in ΔLL, ΔSS, or ΔPFA between the 3 groups when moving from a standing to a sitting position. PI had an inverse linear correlation with PFAextension (R = -0.48; p < 0.0001), PFAstanding (R = -0.53; p < 0.0001), PFArelaxed-seated (R = -0.37; p < 0.0001), and PFAflexed-seated (R = -0.47; p < 0.0001). However, PI was not correlated with ΔPFAstanding/relaxed-seated (R = -0.062; p = 0.48) or ΔPFAextension/flexed-seated (R = -0.12; p = 0.18). Similarly, PI was not significantly correlated with ΔLL or ΔSS in either pair of positions. CONCLUSIONS: This study confirmed that spinopelvic and hip parameters in functional positions were affected by PI, whereas lumbar, pelvic, and hip mobilities did not depend on PI. These findings suggest that hip surgeons should consider the PI of the patient to determine the patient's specific functional safe zones before and after total hip arthroplasty. LEVEL OF EVIDENCE: Prognostic Level II. See Instructions for Authors for a complete description of levels of evidence.

Spinal axial torque assessment after surgical correction in adolescent idiopathic scoliosis: a new approach to 3D barycentremetry and mass distribution based on biplanar radiographs.

PURPOSE: Barycentremetry in adolescent idiopathic scoliosis (AIS) allows the distribution of masses and their loading of the spine to be studied. In particular, the axial torque on the spine has been studied in AIS, but not after surgical correction. Spinal axial torque was studied in AIS before and after surgery. METHODS: All AIS (Lenke 1 and 3) who underwent posterior spinal fusion surgery at our center in 2019 were included retrospectively. AIS underwent frontal and sagittal biplanar radiographs in the free-standing position before surgery, 4 months after surgery, and at the last follow-up. Their spine and external envelope were reconstructed with validated methods. Spinal axial torque at the apex and the upper and lower end vertebra was calculated. Finally, the preoperative and postoperative values were compared to a previously published reference corridor for asymptomatic subjects. RESULTS: Twenty-nine patients were included (54 ± 11° Cobb angle, 15 ± 2 years old at surgery). The surgical procedure decreased the Cobb angle by 36° ± 11° and decreased the spinal axial torque at the upper end vertebra by 2.5 N/m (95% CI = [1.9; 3]; p < 0.001), at the apex by 0.6 N/m (95% CI = [0.4; 1]; p = 0.004), at the lower end vertebra by 2 N/m (95% CI = [1.5; 2.8]; p < 0.001). Compared to 95th percentile of torque, which was previously evaluated in asymptomatic subjects, more than 90% of patients had higher values at the upper and lower end vertebrae before surgery. Postoperatively, 62% of patients still had higher torque at the upper end vertebra than asymptomatic subjects, while only 38% patients showed abnormal values at the lower junction. CONCLUSION: Results of this study confirm that AIS patients show abnormally high spinal axial torque, especially at the end vertebrae, and that this parameter is normalized postoperatively for only a small number of patients.

The relationship between spino-pelvic-hip mobility and quality of life before and after total hip arthroplasty.

INTRODUCTION: Total hip arthroplasty (THA) can significantly improve quality of life (QOL) in patients with hip osteoarthritis. A relationship exists between activity levels and postoperative QOL, but its determinants are not well known. The aim of this work was to investigate the relationship between hip, pelvis and lumbar spine mobility and alignment before and after THA with QOL. MATERIAL AND METHODS: Consecutive patients with hip arthrosis and an indication for THA were included prospectively between July 2019 and December 2020, and they underwent lateral radiographs in free-standing, extension, relaxed- and flexed-seated position. Spinopelvic and hip parameters were measured, as well as their changes between positions to assess hip, pelvis and lumbar spine mobility. Patients were also administered QOL questionnaires. Data were collected preoperatively and 6 and 12 months postoperatively. RESULTS: Seventy patients were included; QOL significantly increased 6 months after THA (from 18 [10; 27] to 61 [48; 72], p < 0.001). QOL further increased by 10 points or more after 6 months in 18% of patients, while it decreased in 16%. The latter showed higher pelvic range of motion (between flexion and extension) than the former. CONCLUSIONS: This study confirmed that QOL is significantly improved by THA, and that spinopelvic alignment and function can play a role. Future work should elucidate how to better predict postoperative QOL from preoperative patient characteristics to improve patient treatment and establish early postoperative physical therapy for patients who could benefit from postoperative improvement of activity-related QOL.

Evidence of spinal stiffening following fusionless bipolar fixation for neuromuscular scoliosis: a shear wave elastography assessment of lumbar annulus fibrosus.

OBJECTIVES: There are no established criteria for stiffness after fusionless surgery for neuromuscular scoliosis (NMS). As a result, there is no consensus regarding the surgical strategy to propose at long-term follow-up. This study reports the first use of shear wave elastography for assessing the mechanical response of lumbar intervertebral discs (IVDs) after fusionless bipolar fixation (FBF) for NMS and compares them with healthy controls. The aim was to acquire evidence from the stiffness of the spine following FBF. PATIENTS AND METHODS: Nineteen NMS operated on with FBF (18 ± 2y at last follow-up, 6 ± 1 y after surgery) were included prospectively. Preoperative Cobb was 89 ± 20° and 35 ± 1° at latest follow-up. All patients had reached skeletal maturity. Eighteen healthy patients (20 ± 4 y) were also included. Shear wave speed (SWS) was measured in the annulus fibrosus of L3L4, L4L5 and L5S1 IVDs and compared between the two groups. A measurement reliability was performed. RESULTS: In healthy subjects, average SWS (all disc levels pooled) was 7.5 ± 2.6 m/s. In NMS patients, SWS was significantly higher at 9.9 ± 1.4 m/s (p < 0.05). Differences were significant between L3L4 (9.3 ± 1.8 m/s vs. 7.0 ± 2.5 m/s, p = 0.004) and L4L5 (10.3 ± 2.3 m/s vs. 7.1 ± 1.1 m/s, p = 0.0006). No difference was observed for L5S1 (p = 0.2). No correlation was found with age at surgery, Cobb angle correction and age at the SWE measurement. CONCLUSIONS: This study shows a significant increase in disc stiffness at the end of growth for NMS patients treated by FBF. These findings are a useful adjunct to CT-scan in assessing stiffness of the spine allowing the avoidance of surgical final fusion at skeletal maturity.

The effect of breathing on the in vivo mechanical characterization of linea alba by ultrasound shearwave elastography.

The most common surgical repair of abdominal wall hernia consists in implanting a mesh to reinforce hernia defects during the healing phase. Ultrasound shearwave elastography (SWE) is a promising non-invasive method to estimate soft tissue mechanical properties at bedside through shear wave speed (SWS) measurement. Combined with conventional ultrasonography, it could help the clinician plan surgery. In this work, a novel protocol is proposed to reliably assess the stiffness of the linea alba, and to evaluate the effect of breathing and of inflating the abdomen on SWS. Fifteen healthy adults were included. SWS was measured in the linea alba, in the longitudinal and transverse direction, during several breathing cycle and during active abdominal inflation. SWS during normal breathing was 2.3 [2.0; 2.5] m/s in longitudinal direction and 2.2 [1.9; 2.7] m/s in the transversal. Inflating the abdomen increased SWS both in longitudinal and transversal direction (3.5 [2.8; 5.8] m/s and 5.2 [3.0; 6.0] m/s, respectively). The novel protocol significantly improved the reproducibility relative to the literature (8% in the longitudinal direction and 14% in the transverse one). Breathing had a mild effect on SWS, and accounting for it only marginally improved the reproducibility. This study proved the feasibility of the method, and its potential clinical interest. Further studies on larger cohort should focus on improving our understanding of the relationship between abdominal wall properties and clinical outcomes, but also provide a cartography of the abdominal wall, beyond the linea alba.

Sagittal plane assessment of manual concave rod bending for posterior correction in adolescents with idiopathic thoracic scoliosis (Lenke 1 and 3).

OBJECTIVES: The objectives of this study were to evaluate the repeatability and reproducibility of a method for measuring freehand rod bending and to analyze the relationship between the rod's bend and the resulting sagittal correction. MATERIALS AND METHODS: All the children who underwent correction by posterior translation using pedicle screws at all levels were included prospectively in 2018 and 2019. The rod's sagittal parameters were measured retrospectively by three independent surgeons on two separate occasions using the same protocol. After the rods were bent but before they were inserted, the surgeon traced the contours of the rods on a sheet of paper that was later scanned and analyzed semiautomatically. The spinal parameters were calculated based on biplanar radiographs taken preoperatively, postoperatively and at the final follow-up visit. Patients who had less than 10° thoracic kyphosis (T5-T12) made up the "Lenke N-" subgroup. RESULTS: Thirty patients were included (14 of whom were Lenke N-) who had a Cobb angle of 59.2±11.3° preoperatively and 13.3±8.4° postoperatively (p<0.00001). The inter- and intrarater ICC for the rod measurements were>0.9 (excellent). The mean kyphosis of the concave rod was 48.4±5.7° (38.3-60.9°). The mean change in T5-T12 kyphosis was 9.7±10.8° (-14.3-30.8°) (p<0.0001) in the entire population, while it was 17.7±7.1° (5.5-30.8°) (p<0.0001) in the Lenke N- subgroup. The change in thoracic kyphosis was positively correlated with the kyphosis of the concave rod (rho=0.52; p=0.003). CONCLUSION: This study found excellent reproducibility and repeatability of measuring freehand rod bending. The kyphosis applied to the concave rod is positively correlated to the change in the resulting kyphosis and made it possible to restore satisfactory thoracic kyphosis. LEVEL OF EVIDENCE: III.

Sagittal alignment in patients with flexion contracture of the hip before and after total hip arthroplasty.

INTRODUCTION: In hip osteoarthritis, hip flexion contracture can severely alter the patient's alignment, and, therefore, affect the patient's quality of life (QOL). Hip contracture is not well-studied, partly because of the difficulties of its diagnosis. The aim of this study was to propose a quantitative definition of hip flexion contracture, and to analyse sagittal alignment in these patients compared to non-contracture ones, before and 12 months after total hip arthroplasty (THA). MATERIALS AND METHODS: Consecutive patients with hip arthrosis and an indication for THA were included (N = 123). Sagittal full-body radiographs were acquired in free standing position and in extension. QOL questionnaires were administered before and after surgery. Spinopelvic parameters were measured, including the pelvic-femur angle (PFA). Patients with low pelvic incidence (< 45°) were included in the hip contracture group if PFA > 5°, or PFA > -5° when pelvic incidence ≥ 45°. RESULTS: 29% of patients were in the hip flexion contracture group, and they showed lower pelvic tilt than the no-contracture group (p < 0.001), larger lumbar lordosis (LL) and smaller PI-LL (p < 0.001), as well as a forward position of the head. 16% of patients still had hip contracture 12-months postop. Contracture patients showed higher QOL scores after surgery. CONCLUSIONS: The proposed method to diagnose hip contracture group allowed to define a group of patients who showed a specific pattern of sagittal spinopelvic alignment. These patients improved their alignment and quality of life postoperatively, but their hip mobility was not always restored. Diagnosing these patients is a first step toward the development of more specific surgical approaches, aiming to improve their surgical outcome.

An analysis on the determinants of head to pelvic balance in a Chinese adult population.

Background: Balanced global spinopelvic balance is important in the maintenance of the physiological alignment of all body segments above the pelvis with minimum energy expenditure. The key determinants affecting the 3D index-odontoid-hip axis (OD-HA) angle, and in particular its alterations, have not been clearly defined. The aim of this study is to identify the determinants of the 3D OD-HA angle in maintaining global spinopelvic balance in a large Chinese adult cohort of different gender and age groups. Methods: A total of 516 asymptomatic adults were enrolled in this study. Biplanar radiographies were performed to reconstruct the subject's inter-acetabular axis and C2 odontoid process. The 3D angle formed by the vertical and the line between odontoid and mid-interacetabular axis (OD-HA angle) was computed and projected in the subject's sagittal and coronal planes. Thoracic kyphosis (TK), lumbar lordosis (LL), T1 pelvic angle (TPA) and sagittal vertical axis (SVA) were measured. Results: The mean values of sagittal and coronal OD-HA were -0.2°±2.5° and 0.2°±1.1°, respectively. Both sagittal and coronal OD-HA had significant correlation with age (r=0.265 and r=-0.143, P<0.01, respectively), sagittal OD-HA showed increment from 20s to 80s (-1.3° to 0.8° for female, -0.3° to 1.5° for male) and a significant difference between male and female from 20 to 69 years old. Further analysis showed that sex, weight, TK, PT, SVA, TPA and ODI were determinants of OD-HA. Conclusions: 3D OD-HA angle showed physiological stability with little variability from young to elderly adults, with SD of 2.45° and 1.06° in sagittal and coronal planes, respectively. OD-HA angle confirms the hypothesis that the head tends to remain above the pelvis in a small cone of stability. This study provides an analysis of the determinants of OD-HA and the reference range of the head-pelvis balance in each decade and gender based on a large-scale asymptomatic population.

Assessment of the axial plane deformity in subjects with adolescent idiopathic scoliosis and its relationship to the frontal and sagittal planes.

PURPOSE: Investigate the axial plane deformity in the scoliotic segment and its relationship to the deformity in the frontal and sagittal planes. METHODS: Two hundred subjects with AIS (Cobb ≥ 20°) underwent low dose biplanar X-rays with 3D reconstruction of the spine and pelvis. All structural curves were considered and were distributed as follows: 142 thoracic (T), 70 thoracolumbar (TL), and 47 lumbar curves (L). Common 3D spino-pelvic and scoliosis parameters were collected such as: frontal Cobb; torsion index (TI); hypokyphosis/lordosis index (HI). Parameters were compared between each type of curvature and correlations were investigated between the 3 planes. RESULTS: Frontal Cobb was higher in all T (45 ± 19°) and TL (41 ± 15°) curves compared to L curves (35 ± 14°, p = 0.004). TI was higher in T curves when compared to TL and L curves (TI: 15 ± 8°, 9 ± 6°, 7 ± 5°, p < 0.001). HI was similar between curve types. T curves showed significant correlations between the 3 planes: Cobb vs. TI (r = 0.76), Cobb vs. HI (r = - 0.54) and HI vs. TI (r = - 0.42). The axial plane deformity was related to the frontal deformity and the type of curvature (adjusted-R2 = 0.6). CONCLUSION: Beside showing the most severe deformity frontally and axially compared to TL and L curves, the T curves showed strong correlations between the 3 planes of the deformity. Moreover, this study showed that the axial plane deformity cannot be fully determined by the frontal and sagittal deformities, which highlights the importance of 3D assessment in the setting of AIS.

Estimating pulmonary function after surgery for adolescent idiopathic scoliosis using biplanar radiographs of the chest with 3D reconstruction.

AIMS: This study addressed two questions: first, does surgical correction of an idiopathic scoliosis increase the volume of the rib cage, and second, is it possible to evaluate the change in lung function after corrective surgery for adolescent idiopathic scoliosis (AIS) using biplanar radiographs of the ribcage with 3D reconstruction? METHODS: A total of 45 patients with a thoracic AIS which needed surgical correction and fusion were included in a prospective study. All patients underwent pulmonary function testing (PFT) and low-dose biplanar radiographs both preoperatively and one year after surgery. The following measurements were recorded: forced vital capacity (FVC), slow vital capacity (SVC), and total lung capacity (TLC). Rib cage volume (RCV), maximum rib hump, main thoracic curve Cobb angle (MCCA), medial-lateral and anteroposterior diameter, and T4-T12 kyphosis were calculated from 3D reconstructions of the biplanar radiographs. RESULTS: All spinal and thoracic measurements improved significantly after surgery (p < 0.001). RCV increased from 4.9 l (SD 1) preoperatively to 5.3 l (SD 0.9) (p < 0.001) while TLC increased from 4.1 l (SD 0.9) preoperatively to 4.3 l (SD 0.8) (p < 0.001). RCV was correlated with all functional indexes before and after correction of the deformity. Improvement in RCV was weakly correlated with correction of the mean thoracic Cobb angle (p = 0.006). The difference in TLC was significantly correlated with changes in RCV (p = 0.041). It was possible to predict postoperative TLC from the postoperative RCV. CONCLUSION: 3D rib cage assessment from biplanar radiographs could be a minimally invasive method of estimating pulmonary function before and after spinal fusion in patients with an AIS. The 3D RCV reflects virtual chest capacity and hence pulmonary function in this group of patients. Cite this article: Bone Joint J 2022;104-B(1):112-119.

Contribution of shear wave elastography in evaluation of the deltoid in reverse shoulder arthroplasty: reproducibility study and preliminary results.

AIMS: The current difficulty of reverse shoulder arthroplasty (RSA) is soft tissue management, and adequate deltoid tension and at present there is no consensus and available tools (X-ray, MRI, EMG) remain difficult to apply in clinical follow-up. The objective of this study was (1) to determine reliability and feasibility of deltoid elasticity assessment using ultrasound elastographyand (2) to assess the change of deltoid stiffness after RSA by comparing shear wave speed (SWS) between healthy and RSA shoulders. MATERIAL AND METHODS: Twenty-six healthy (native shoulder, painless and complete range of motion) subjects and twelve patients with RSA were included. Two independent investigators performed 3 measurements on each segment. Measurements were bilateral. Anterior segment was also evaluated at 45° and 60° of passive abduction. Reliability and feasibility have been assessed (ISO5725-standard). RESULTS: Coefficient of measurements variation was less than 6.1% and 0.13 m/s. In the healthy group, SWS was not significantly different between anterior and middle segments; however, the SWS of the posterior segment was significantly lower than others (p<0.0001). In abduction position, compared to the rest position, SWS of the anterior segment decreased at 45° abduction (p=0.0003) and increased at 60° abduction (p<0.0001). Variability of measurement was higher in the RSA group. No significant difference was found between the SWS measurement of the operated and non-operated side. SWS measurements of the operated side of the anterior and middle segment were significantly higher compared to the healthy group. In abduction position, compared to rest position, no difference in SWS of the anterior segment was found at 45° abduction (p=0.71) and nor at 60° abduction (p=0.75). CONCLUSION: This study demonstrated feasibility and reliability of shoulder assessment with shear wave elastography. Reference values for asymptomatic patients can already be used in future studies on shoulder pathology and surgery.

The Impact of Hip Mobility on Lumbar and Pelvic Mobility before and after Total Hip Arthroplasty.

Hip arthrosis and total hip arthroplasty (THA) can alter a patient's balance and spinopelvic mobility. In this study, we hypothesized that lumbar, pelvic, and hip mobility and their inter-relations are affected by THA and that their study could give an insight in our understanding of postoperative balance and mobility. A total of 165 patients with hip arthrosis and with an indication for THA were included in this single-center prospective cohort. Sagittal radiographs were acquired in four positions: free-standing, standing extension, relaxed-seating and flexed-seating preoperatively and at 6 and 12 months. Spinopelvic parameters were measured (pelvic tilt and incidence, sacral slope, lumbar lordosis, pelvic-femoral angle). Standing spinopelvic parameters did not significantly change postoperatively. However, the postural changes occurring between positions were significantly altered after THA. In particular, pelvic and lumbar mobility was significantly reduced postoperatively, while hip mobility was increased. Correlations were observed between the changes in lumbar, pelvic and hip mobility before and after THA. This study confirmed that there is a relationship between lumbar, pelvic and hip mobility in osteoarthritis, and that this relationship is modified by the postoperative compensation mechanisms deployed by the patient in dynamic postures. Hence, surgeons should consider these relationships when planning surgery, in order to obtain a physiological pelvic tilt postoperatively and to account for the potential increased risk of impingement and dislocation with hip hypermobility.

From in vitro evaluation of a finite element model of the spine to in silico comparison of spine instrumentations.

Growth-preserving spinal surgery suffer from high complications rate. A recent bipolar instrumentation using two anchoring points (thoracic and pelvic) showed lower rates, but its biomechanical behaviour has not been characterised yet. The aim of this work was to combine in vitro and in vivo data to improve and validate a finite element model (FEM) of the spine, and to apply it to compare bipolar and classical all-screws implants. Spinal segments were tested in vitro to measure range of motion (ROM). Thoracic segments were also tested with bipolar instrumentation to measure ROM and rod strain using a strain gage. A subject-specific FEM of the spine, pelvis and ribcage of an in vivo asymptomatic subject was built. Spinal segments were extracted from it to reproduce the in-vitro mechanical tests. Experimental and simulated ROM and rod strain were compared. Then, the full trunk FEM was used to compare bipolar and all-screws instrumentations. The FEM fell within 1° of the experimental corridors, and both in silico and in vitro instrumentation rods showed 0.01% maximal axial strain. Bipolar and all-screws constructs had similar maximal Von Mises stresses. This work represents a first step towards subject-specific simulation to evaluate spinal constructs for neuromuscular scoliosis in children.

Comparison of 3D and 2D characterization of spinal geometry from biplanar X-rays: a large cohort study.

BACKGROUND: Biplanar X-ray system providing anteroposterior and sagittal plane with an ultra-low radiation dose and in weight-bearing position is increasingly used for spine imaging. The original three-dimensional (3D) reconstruction method from biplanar X-rays has been widely used for clinical parameters, however, the main issue is that manual adjustments of the 3D model was quite time-consuming and limited to thoracolumbar spine. A quasi-automated 3D reconstruction method of the spine from cervical vertebra to pelvis was proposed, which proved fast and accurate in 57 patients with adolescent idiopathic scoliosis. The aim of this study was to compare the newly developed technique of quasi-automatic 3D measurement with classical 2D measurements in a large cohort. METHODS: A total of 494 adults with biplanar EOS X-ray scanning were included in this study and divided into health and deformity group according to the presence of spinal deformity. The proposed method of quasi-automatic 3D measurement was applied to all these subjects. The radiographic parameters included: thoracic kyphosis (TK), lumbar lordosis (LL), pelvic incidence (PI), pelvic tilt (PT), sagittal vertical axis (SVA), T1 pelvic angle (TPA) in sagittal plane, and cobb angle in coronal plane. Comparison was made between quasi-automatic and manual measurement. RESULTS: The mean age was 53.7±19.9 years old. In the whole population, the mean differences between the two methods were 3.9° for TK (30.5°±9.9° vs. 26.5°±9.3°, P<0.001), -5.2° for LL (-47.5°±11.2° vs. -42.4°±11.0°, P<0.001), 3.6° for PI (46.9°±10.3° vs. 43.9°±10.3°, P<0.001), -0.2° for PT (11.9°±7.7° vs. 12.0°±8.2°, P=0.328), -2.1 mm for SVA (15.7±26.2 vs. 17.8±26.3 mm, P=0.221) and -1.1° for TPA (9.0°±7.6° vs. 10.1°±7.8°, P=0.051). The deformity group had similar mean differences with the asymptomatic group with the values ranged from -4.1° to 3.8° for sagittal parameters. The mean differences of Cobb angle were 1.9° for patients with Cobb angle <30° and 2.3° for patients with Cobb angle >30°, respectively. Correlation analysis showed r2 for all clinical parameters ranged from 0.667 to 0.923. On average, the new method takes 5 minutes to compute all the parameters for one case. CONCLUSIONS: In conclusion, this ergonomic and efficient quasi-automatic method for full spine proved fast and accurate measurement in a large population, which showed great potential in extensive clinical application.

Minimally Invasive Surgery for Neuromuscular Scoliosis: Results and Complications at a Minimal Follow-up of 5 Years.

STUDY DESIGN: A prospective study. OBJECTIVE: The aim of this study was to report the results of an alternative technique to growing rods (GR) for neuromuscular scoliosis using a minimally invasive fusionless surgery with a minimum of 5 years' follow-up. SUMMARY OF BACKGROUND DATA: Conservative treatment is not effective in progressive neuromuscular scoliosis. Early surgery using GR is increasingly advocated to control the deformity while preserving spinal and thoracic growth before arthrodesis. These techniques still provide a high rate of complications. METHODS: The technique relies on a bilateral double rod sliding instrumentation anchored proximally by four hooks claws and distally to the pelvis by iliosacral screws through a minimally invasive approach. The clinical and radiological outcomes of 100 consecutive patients with neuromuscular scoliosis who underwent this fusionless surgery with a minimum follow-up of 5 years were reviewed. RESULTS: 6.5 ±â€Š0.7 years after initial surgery, six patients were lost of follow-up and 11 died of unrelated raison. Of the 83 remaining patients at latest follow-up, mean Cobb angle was stable to 35.0° which correspond to 61% correction of the initial deformation. Mean pelvic obliquity was 29.6° (0.3°-80.0°) preoperatively and 7.2 (0.2°-23.5°) at latest follow-up. Correction of the hyper kyphosis remained stable. Skeletal maturitywas reached in 42 of 83 patients (50.6%). None of these patients has required spinal fusion. The global complication rate was 31.3%. CONCLUSION: The outcomes of this minimally invasive fusionless technique at 5 years follow-up showed a stable correction of spinal deformities and pelvic obliquity over time, with a reduced rate of complication. The arthrodesis was not required for all patients at skeletal maturity. This technique could be a good alternative to arthrodesis for neuromuscular scoliosis.Level of Evidence: 3.

Global sagittal alignment after surgery of right thoracic idiopathic scoliosis in adolescents and adults with and without thoracic hypokyphosis.

This study aimed to characterize global sagittal alignment in adolescent idiopathic scoliosis (AIS) with normal kyphosis (NTK, kyphosis > 10°) and with thoracic hypokyphosis (THK, kyphosis < 10°), before and after posterior spinal fusion, and compare them with asymptomatic controls. 27 AIS girls and young adults with right thoracic curves were included (seventeen with age ≤ 18 years, then age > 21). Biplanar radiographies were acquired at baseline, immediate post-operatively, 1-year and 2-year follow-up, and 3D reconstruction of the spine and pelvis was performed. NTK and THK showed different global sagittal alignment, as well as differences compared to controls. AIS with THK at baseline had higher SVA/SFD (2.0 ± 2.9 vs - 0.4 ± 1.9; P < 0.05) and OD-HA (0.2 ± 1.4° vs - 1.3 ± 1.6°; P < 0.05) than controls, indicating that THK had compensated balance with unusual forward leaning posture. Immediately post-operation, SVA/SFD remained high (1.3 ± 3.0) while OD-HA reversed (- 1.2 ± 1.7°), indicating that THK patients had found partially compensated balance. After 2-yeas, both SVA/SFD (- 1.3 ± 2.1) and OD-HA (- 1.4 ± 0.9°) were normalized. The changes in global sagittal alignment and mechanism of balance are different in AIS with or without THK. As the head plays a critical role on balance during immediate and delayed post-operation, OD-HA can be complementary parameter for assessing global balance during post-operative follow-up of AIS patients with THK.

A Novel Classification of 3D Rib Cage Deformity in Subjects With Adolescent Idiopathic Scoliosis.

STUDY DESIGN: This was a multicentric cross-sectional descriptive study. OBJECTIVE: To analyze patterns of 3D rib cage deformity in subjects with adolescent idiopathic scoliosis (AIS) and their relationship with the spinal deformity. SUMMARY OF BACKGROUND DATA: Subjects with AIS present with rib cage deformity that can affect respiratory functions. The 3D rib cage deformities in AIS and their relationship to the spinal deformity are still unelucidated. METHODS: A total of 200 AIS and 71 controls underwent low-dose biplanar x-rays and had their spine and rib cage reconstructed in 3-dimensional (D). Classic spinopelvic parameters were calculated in 3D and: rib cage gibbosity, thickness, width, volume and volumetric spinal penetration index (VSPI). Subjects with AIS were classified as: group I with mild rib cage deformity (n=88), group II with severe rib cage deformity (n=112) subgrouped into IIa (high gibbosity, n=48), IIb (high VSPI, n=48), and IIc (both high gibbosity and VSPI, n=16). RESULTS: Groups IIa and IIb had a higher Cobb angle (33 vs. 54 degrees and 46 degrees, respectively) and torsion index (11 vs. 14 degrees and 13 degrees, respectively) than group I. Group IIb showed more severe hypokyphosis (IIb=21 degrees; IIa=33 degrees; I=36 degrees; control=42 degrees) with a reduced rib cage volume (IIb=4731 cm3; IIa=4985 cm3; I=5257 cm3; control=5254 cm3) and thickness (IIb=135 mm; IIa=148 mm; I=144 mm; control=144 mm). Group IIa showed an increasingly large local gibbosity descending from proximal to distal levels and did not follow the axial rotation of the spine. Group IIc showed characteristics of both groups IIa and IIb. CONCLUSIONS: This new classification of 3D rib cage deformity in AIS shows that the management of cases with high VSPI (groups IIb and IIc) should focus on restoring as much kyphosis as possible to avoid respiratory repercussions. Treatment indications in groups I and IIa would follow the consensual basic principles reported in the literature regarding bracing and surgery.

Prediction of clinical height gain from surgical posterior correction of idiopathic scoliosis.

OBJECTIVE: The best predictors of height gain due to surgical correction are the number of fused vertebrae and the degrees of the corrected Cobb angle. Existing studies of predictive models measured the radiographic spinal height and did not report the clinical height gain. The aims of this study were to determine the best predictive factors of clinical height gain before surgical correction, construct a predictive model using patient population data for machine learning, and test the performance of this model on a validation population. METHODS: The authors reviewed 145 medical records of consecutive patients who underwent surgery that included placement of posterior spinal instrumentation and fusion for idiopathic scoliosis between 2012 and 2016. Standing and sitting clinical heights were measured before and after surgery in patients who had been surgically treated under similar conditions. Multivariate analysis was then performed and the results were used to develop a predictive model for height gain after surgery. The data from the included patients were randomly assigned to a learning set or a test set. RESULTS: In total, 116 patients were included in the analysis, for whom the average postoperative clinical height gain in a standing position was 4.2 ± 1.8 cm (range 0-11 cm). The best prediction model was calculated as follows: standing clinical height gain (cm) = 1 - 0.023 × sitting clinical height (cm) - 0.19 × Risser stage + 0.058 × Cobb preoperative angle (°) + 0.021 × T5-12 kyphosis (°) + 0.14 × number of levels fused. In the validation cohort, 91% of the predicted values had an error of less than one-half of the actual height gain. CONCLUSIONS: This predictive model formula for calculating the potential postoperative height gain after surgical treatment can be used preoperatively to inform idiopathic scoliosis patients of what outcomes they may expect from posterior spinal instrumentation and fusion (taking into account the model's uncertainty).