Praziquantel meets Niclosamide: A dual-drug Antiparasitic Cocrystal.

In this paper we report a successful example of combining drugs through cocrystallization. Specifically, the novel solid is formed by two anthelminthic drugs, namely praziquantel (PZQ) and niclosamide (NCM) in a 1:3 molar ratio, and it can be obtained through a sustainable one-step mechanochemical process in the presence of micromolar amounts of methanol. The novel solid phase crystallizes in the monoclinic space group of P21/c, showing one PZQ and three NCM molecules linked through homo- and heteromolecular hydrogen bonds in the asymmetric unit, as also attested by SSNMR and FT-IR results. A plate-like habitus is evident from scanning electron microscopy analysis with a melting point of 202.89 °C, which is intermediate to those of the parent compounds. The supramolecular interactions confer favorable properties to the cocrystal, preventing NCM transformation into the insoluble monohydrate both in the solid state and in aqueous solution. Remarkably, the PZQ - NCM cocrystal exhibits higher anthelmintic activity against in vitro S. mansoni models than corresponding physical mixture of the APIs. Finally, due to in vitro promising results, in vivo preliminary tests on mice were also performed through the administration of minicapsules size M.

Co-Crystalline Solid Solution Affords a High-Soluble and Fast-Absorbing Form of Praziquantel.

Praziquantel (PZQ) is a chiral class-II drug, and it is used as a racemate for the treatment of schistosomiasis. The knowledge of several cocrystals with dicarboxylic acids has prompted the realization of solid solutions of PZQ with both enantiomers of malic acid and tartaric acid. Here, the solid form landscape of such a six-component system has been investigated. In the process, two new cocrystals were structural-characterized and three non-stoichiometric, mixed crystal forms identified and isolated. Thermal and solubility analysis indicates a fourfold solubility advantage for the newly prepared solid solutions over the pure drug. In addition, a pharmacokinetic study was conducted in rats, which involved innovative mini-capsules for the oral administration of the solid samples. The available data indicate that the faster dissolution rate of the solid solutions translates in faster absorption of the drug and helps maintain a constant steady-state concentration.

Dually Cross-Linked Core-Shell Structure Nanohydrogel with Redox-Responsive Degradability for Intracellular Delivery.

A redox-responsive nanocarrier is a promising strategy for the intracellular drug release because it protects the payload, prevents its undesirable leakage during extracellular transport, and favors site-specific drug delivery. In this study, we developed a novel redox responsive core-shell structure nanohydrogel prepared by a water in oil nanoemulsion method using two biocompatible synthetic polymers: vinyl sulfonated poly(N-(2-hydroxypropyl) methacrylamide mono/dilactate)-polyethylene glycol-poly(N-(2-hydroxypropyl) methacrylamide mono/dilactate) triblock copolymer, and thiolated hyaluronic acid. The influence on the nanohydrogel particle size and distribution of formulation parameters was investigated by a three-level full factorial design to optimize the preparation conditions. The surface and core-shell morphology of the nanohydrogel were observed by scanning electron microscope, transmission electron microscopy, and further confirmed by Fourier transform infrared spectroscopy and Raman spectroscopy from the standpoint of chemical composition. The redox-responsive biodegradability of the nanohydrogel in reducing environments was determined using glutathione as reducing agent. A nanohydrogel with particle size around 250 nm and polydispersity index around 0.1 is characterized by a thermosensitive shell which jellifies at body temperature and crosslinks at the interface of a redox-responsive hyaluronic acid core via the Michael addition reaction. The nanohydrogel showed good encapsulation efficiency for model macromolecules of different molecular weight (93% for cytochrome C, 47% for horseradish peroxidase, and 90% for bovine serum albumin), capacity to retain the peroxidase-like enzymatic activity (around 90%) of cytochrome C and horseradish peroxidase, and specific redox-responsive release behavior. Additionally, the nanohydrogel exhibited excellent cytocompatibility and internalization efficiency into macrophages. Therefore, the developed core-shell structure nanohydrogel can be considered a promising tool for the potential intracellular delivery of different pharmaceutical applications, including for cancer therapy.

Protective and regenerative effects of a novel medical device against esophageal mucosal damage using in vitro and ex vivo models.

Gastroesophageal reflux disease (GERD) is a common digestive disorder that causes esophagitis and injuries to the esophageal mucosa. GERD symptoms are recurrent during pregnancy and their treatment is focused on lifestyle changes and nonprescription medicines. The aim of this study was to characterize the mechanism of action of a new patented medical device, an oral formulation containing hyaluronic acid, rice extract, and amino acids dispersed in a bioadhesive polymer matrix, by assessing its protective effects in in vitro and ex vivo models of esophageal mucosa damage. Acidic bile salts and pepsin cocktail (BSC) added to CP-A and COLO-680 N esophagus cells were used as an in vitro GERD model to evaluate the binding capacities, anti-inflammatory effects and reparative properties of the investigational product (IP) in comparison to a viscous control. Our results showed that the IP prevents cell permeability and tight junction dysfunction induced by BSC. Furthermore, the IP was also able to down-regulate IL-6 and IL-8 mRNA expression induced by BSC stimulation and to promote tissue repair and wound healing. The results were confirmed by ex vivo experiments in excised rat esophagi through the quantification of Evans Blue permeability assay. These experiments provided evidence that the IP is able to bind to the human esophagus cells, preventing the damage caused by gastroesophageal reflux, showing potential anti-irritative, soothing, and reparative properties.

Exploring mechanochemical parameters using a DoE approach: Crystal structure solution from synchrotron XRPD and characterization of a new praziquantel polymorph.

A rotated Doehlert matrix was utilized to explore the experimental design space around the milling parameters of Praziquantel (PZQ) polymorph B formation in terms of frequency and milling time. Three experimental responses were evaluated on the resulting ground samples: two quantitative responses, i.e. median particle size by Laser Light scattering (LLS) and drug recovery by HPLC, and one qualitative dependent variable, i.e. the obtained PZQ crystalline form, characterized through X-Ray Powder Diffraction (XRPD) and confirmed by Differential Scanning Calorimetry (DSC) and Thermogravimetric analysis (TGA). Temperature inside the jars was kept under constant control during the milling process by using temperature sensor equipped jars (thermojars), thus allowing evaluation of the obtained solid states at each experimental point, considering the specific temperature of the process. This explorative analysis led to the finding of a novel PZQ polymorph, named "Form C", produced without degradation, then fully characterized, including by means of Synchrotron XRPD, Polarimetric, FT-IR, SS-NMR, ESEM and saturation solubility. Crystal structure was solved from XRPD data and its geometry was optimized by DFT calculations (CASTEP). Finally, Form C and Form A activity against adult schistosoma mansoni were compared through in vitro testing, and Form C's physical stability checked. The new polymorph, crystallizing in space group I2/c, physically stable for approximately 2 months, showed a m.p. of 106.84 °C and displayed excellent biopharmaceutical properties (water solubility of 382.69±9.26 mg/l), while preserving excellent activity levels against adult schistosoma mansoni.

Combining Mechanochemistry and Spray Congealing for New Praziquantel Pediatric Formulations in Schistosomiasis Treatment.

Praziquantel (PZQ) is the first line drug for the treatment of schistosome infections and is included in the WHO Model List of Essential Medicines for Children. In this study, the association of mechanochemical activation (MA) and the spray congealing (SC) technology was evaluated for developing a child-friendly PZQ dosage form, with better product handling and biopharmaceutical properties, compared to MA materials. A 1:1 by wt PZQ-Povidone coground-was prepared in a vibrational mill under cryogenic conditions, for favoring amorphization. PZQ was neat ground to obtain its polymorphic form (Form B), which has an improved solubility and bioactivity. Then, activated PZQ powders were loaded into microparticles (MPs) by the SC technology, using the self-emulsifying agent Gelucire® 50/13 as a carrier. Both, the activated powders and the corresponding loaded MPs were characterized for morphology, wettability, solubility, dissolution behavior, drug content, and drug solid state (Hot Stage Microscopy (HSM), Differential Scanning Calorimetry (DSC), X-Ray Powder Diffraction Studies (PXRD), and FT-IR). Samples were also in vitro tested for a comparison with PZQ against Schistosoma mansoni newly transformed schistosomula (NTS) and adults. MPs containing both MA systems showed a further increase of biopharmaceutical properties, compared to the milled powders, while maintaining PZQ bioactivity. MPs containing PZQ Form B represented the most promising product for designing a new PZQ formulation.

Antibacterial drug release from a biphasic gel system: Mathematical modelling.

Bacterial infections represent an important drawback in the orthopaedic field, as they can develop either immediately after surgery procedures or after some years. Specifically, in case of implants, they are alleged to be troublesome as their elimination often compels a surgical removal of the infected implant. A possible solution strategy could involve a local coating of the implant by an antibacterial system, which requires to be easily applicable, biocompatible and able to provide the desired release kinetics for the selected antibacterial drug. Thus, this work focusses on a biphasic system made up by a thermo-reversible gel matrix (Poloxamer 407/water system) hosting a dispersed phase (PLGA micro-particles), containing a model antibacterial drug (vancomycin hydrochloride). In order to understand the key parameters ruling the performance of this delivery system, we developed a mathematical model able to discriminate the drug diffusion inside micro-particles and within the gel phase, eventually providing to predict the drug release kinetics. The model reliability was confirmed by fitting to experimental data, proposing as a powerful theoretical approach to design and optimize such in situ delivery systems.

Urine metabolomics shows an induction of fatty acids metabolism in healthy adult volunteers after supplementation with green coffee (Coffea robusta L.) bean extract.

BACKGROUND AND OBJECTIVE: Green coffee bean extract is used as herbal medicine or supplement for weight reduction and obesity. The active constituents are considered caffeine and chlorogenic acid (CGA) derivatives. The mode of action of CGA is still unclear and can be related to peroxisome proliferator-activated receptor α (PPAR-α) and liver X receptor Rα (LXR-α). Metabolomics may be an innovative tool for the description and discovery of the multiple target nature of such phytocomplex. METHODS: 24 h urine samples were collected once a week from ten healthy adult volunteers consuming daily 400 mg of dry Green coffee bean extract (GCBE, 4.9% of chlorogenic acid) each day for 30 days (5 harvesting days, considering also the first day of supplementation). Urine samples were analyzed by LC-QTOF using both untargeted and targeted approaches. The latter was used to monitor two urinary markers of oxidative stress (allantoin, 8-OHdG). RESULTS: Metabolomics analysis (PLS-DA) revealed changes in urine composition before and during the treatment with GCBE. Markers related to treatment were metabolites related to polyphenol administration as hippuric acid, benzoic acid derivatives, dihydroferulic and dihydrosinapic acid sulphate, but also carnitine derivatives and dicarboxylic acids. On the other hand, no changes in the levels of allantoin and 8-OHdG were observed. CONCLUSION: This preliminary study showed the possible usefulness of metabolomics approach in the evaluation of GCBE consumption in healthy subjects. The observed changes in urinary composition can be related to the catabolism of GCBE constituents and to induced fatty acid metabolism, mainly related to carnitine derivatives. This latter result could be considered, at least in part, as a further proof of the mode of action of green coffee extract.

A new soluble and bioactive polymorph of praziquantel.

Praziquantel is the only available drug to treat Schistosomiasis. However, its utilization is limited by many drawbacks, including the high therapeutic dose needed, resulting in large tablets and capsules difficult to be swallowed, especially from pediatric patients. In this study, an alternative option to overcome these disadvantages is proposed: to switch to a novel crystalline polymorph of racemic compound praziquantel. The preparation of the crystalline polymorph was realized via a neat grinding process in a vibrational mill. The new phase (Form B) was chemically identical to the starting material (as proved by HPLC, 1H NMR, and polarimetry), but showed different physical properties (as evaluated by SEM, differential scanning calorimetry, thermogravimetry, ATR-FTIR spectroscopy, X-ray powder diffraction, and solid-state NMR). Furthermore, the crystal structure of the new phase was solved from the powder synchrotron X-ray diffraction pattern, resulting in a monoclinic C2/c cell and validated by DFT-D calculation. Moreover the simulated solid-state NMR 13C chemical shifts were in excellent agreement with the experimental data. The conversion of original praziquantel into Form B showed to affect positively the water solubility and the intrinsic dissolution rate of praziquantel. Both the in vitro and in vivo activity against Schistosoma mansoni were maintained. Our findings suggest that the new phase, that proved to be physically stable for at least one year, is a promising product for designing a new praziquantel formulation.

Milling and comilling Praziquantel at cryogenic and room temperatures: Assessment of the process-induced effects on drug properties.

This study is a comprehensive evaluation of praziquantel (PZQ) behavior upon grinding considering the influence of milling temperature (cryogenic vs room temperature), frequency and time and presence of polymers (milled raw PZQ vs comilled PZQ/povidone and PZQ/crospovidone at 50:50 w/w) on two experimental responses (residual crystallinity and PZQ recovery). To this aim a full factorial design was set up and the responses of the experimental design were statistically assessed. The powder temperature, measured in different milling conditions, was found to increase with increasing milling frequency and time, up to a maximum recorded value of 46.9 °C (after 90 min at R.T.), for all the three powder systems. When PZQ was ground in RT environment, the recovery was 100%, independently from frequency and time of milling. Its residual crystallinity remained pronounced (>70%) upon milling, even if treated at the most severe conditions. Conversely, when the drug was milled in presence of the polymers, it showed a higher tendency to degradation and amorphysation, independently from the choice of the polymer. The use of cryogenic conditions, operating at temperatures lower than PZQ glass transition, permitted to dramatically reduce PZQ residual crystallinity when the drug was ground by itself. In the case of binary mixtures, the switch to a cryogenic environment did not affect significantly the experimental responses, but permitted to obtain a more predictable trend of both drug recovery and residual crystallinity when varying time and frequency of milling.

The antiadhesive activity of cranberry phytocomplex studied by metabolomics: Intestinal PAC-A metabolites but not intact PAC-A are identified as markers in active urines against uropathogenic Escherichia coli.

Cranberry procyanidins and quercetin derivatives are considered possible active compounds against urinary tract infections (UTIs). In this paper a small group (n=6) of healthy subjects consumed a product containing 360mg of cranberry extract (42.6% w/w of PAC-A and 14.6% w/w of PAC-B) and 200mg of quercetin. Urine samples were collected after 2,4,6,8, and 24h. The changes in antiadhesive properties against urophatogenic E. coli of the urinary output were determined in vitro and modification to urinary metabolome were studied by LC-MS. Significant antiadhesive properties of urine samples were observed, with the greatest effect 6-8h after oral administration, confirming the possible usefulness of cranberry containing products in urinary tract infections (UTI). Metabolomic analysis revealed that valeric acid and valerolactone derivatives that were detected in 6 and 8h sample, while 4-hydroxy-5-(phenyl)-valeric acid-O-glucuronide and 5-(3',4'-dihydroxyphenyl)-γ-valerolactone at 6h and 4-hydroxy-5-(phenyl)-valeric acid-O-sulphate, 3-hydroxyphenyl-valeric acid, 5-(4'-hydroxyphenyl)-gamma-valerolactone-4'-O-glucuronide and 4-hydroxy-5-(3'-hydroxyphenyl)-valeric acid-3'-O-sulphate were the most abundant at 8h. The present study shows that the antiadhesive properties of urine sample after cranberry consumption are not ascribable to the direct effect of PAC-A, because their levels in urinary output are in the range of ng/mL. On the other hand, significant metabolites that were detected are mainly metabolites of intestinal action on polyphenols and PACs, as well as glucuronidated and sulphated quercetin, suggesting an important role of intestinal modification of phytoconstituents in the cranberry extract mechanism of action.

An explorative analysis of process and formulation variables affecting comilling in a vibrational mill: The case of praziquantel.

Praziquantel, a BCS II class anthelmintic drug used for the treatment of schistosome infections, was coground in a vibrational mill with different polymers (linear and crosslinked povidone, copovidone and sodium starch glycolate). An explorative analysis of formulation variables (drug-polymer wt ratio and polymer type) and process parameters (type of grinding media, grinding time and frequency) was carried out with the help of an experimental screening design. The influence of the above mentioned factors on three PZQ characteristics (residual crystallinity, water solubility enhancement and drug recovery) was studied. The variation of carrier amount proved to be by far the most important variable affecting all the experimental responses. A lower impact and, in some cases, rather null effect, had the variation of the process variables. All coground systems were characterized by a high amorphous degree and a solubility significantly higher than the API. A very promising product was obtained by processing at 20Hz for 4h, using 3 spheres of 15mm as grinding media, i.e. a coground having a 50% API content, showing a 4.6-fold greater solubility at 20°C than pure praziquantel. This product maintained the same antischistosomal activity of pure API and was both physically and chemically stable for at least 6 months.

Nanostructured Drugs Embedded into a Polymeric Matrix: Vinpocetine/PVP Hybrids Investigated by Debye Function Analysis.

Microcrystalline vinpocetine, coground with cross-linked polyvinylpyrrolidone, affords hybrids containing nanosized drug nanocrystals, the size and size distributions of which depend on milling times and drug-to-polymer weight ratios. Using an innovative approach to microstructural characterization, we analyzed wide-angle X-ray total scattering data by the Debye function analysis and demonstrated the possibility to characterize pharmaceutical solid dispersions obtaining a reliable quantitative view of the physicochemical status of the drug dispersed in an amorphous carrier. The microstructural properties derived therefrom have been successfully employed in reconciling the enigmatic difference in behavior between in vitro and in vivo solubility tests performed on nanosized vinpocetine embedded in a polymeric matrix.

New findings on the in vivo antioxidant activity of Curcuma longa extract by an integrated (1)H NMR and HPLC-MS metabolomic approach.

Curcuminoids possess powerful antioxidant activity as demonstrated in many chemical in vitro tests and in several in vivo trials. Nevertheless, the mechanism of this activity is not completely elucidated and studies on the in vivo antioxidant effects are still needed. Metabolomics may be used as an attractive approach for such studies and in this paper, we describe the effects of oral administration of a Curcuma longa L. extract (150 mg/kg of total curcuminoids) to 12 healthy rats with particular attention to urinary markers of oxidative stress. The experiment was carried out over 33 days and changes in the 24-h urine samples metabolome were evaluated by (1)H NMR and HPLC-MS. Both techniques produced similar representations for the collected samples confirming our previous study. Modifications of the urinary metabolome lead to the observation of different variables proving the complementarity of (1)H NMR and HPLC-MS for metabolomic purposes. The urinary levels of allantoin, m-tyrosine, 8-hydroxy-2'-deoxyguanosine, and nitrotyrosine were decreased in the treated group thus supporting an in vivo antioxidant effect of the oral administration of Curcuma extract to healthy rats. On the other hand, urinary TMAO levels were higher in the treated compared to the control group suggesting a role of curcumin supplementation on microbiota or on TMAO urinary excretion. Furthermore, the urinary levels of the sulphur containing compounds taurine and cystine were also changed suggesting a role for such constituents in the biochemical pathways involved in Curcuma extract bioactivity and indicating the need for further investigation on the complex role of antioxidant curcumin effects.

Pharmacokinetics and immunomodulatory effect of lipophilic Echinacea extract formulated in softgel capsules.

An attractive herbal product, softgel capsules containing 10 mg of Echinacea angustifolia lipophilic extract, was given in a single oral administration to 10 human volunteers to perform a pharmacokinetic and immunological study. The plasma concentration of the major constituent was monitored, quantifying at predetermined time points the dodeca-2E,4E,8Z,10E/Z-tetraenoic isobutylamides (tetraene). The plasmatic levels of IL-2, IL-6, IL-8, IL-10 and TNF-a in samples collected before and 24 h after drug administration were analyzed by cytokine assay. The total RNA was extracted from limpho-monocyte isolated from the same blood samples and the same cytokines in terms of gene expression were evaluated. With the help of proper statistical tests the differences between the values obtained at 0 and 24 h were evaluated. Results of pharmacokinetic studies attest an approximately 3.5-fold improvement of tetraene oral bioavailability compared with previously published studies. Dodeca-2E,4E-dienoic acid isobutylamide exerts immunomodulatory effects down-regulating the gene expression and reducing the protein plasmatic levels of pro-inflammatory cytokines such as IL-6, TNF-α and IL-8, and up-regulating the expression of anti-inflammatory molecules as IL-10. Student's two-sided paired t-test and non-parametric Wilcoxon-Mann-Whitney signed rank test agree in the conclusions about the differences between the ln values at 24 h and corresponding ln values at 0 h.

Mechanochemical activation of vincamine mediated by linear polymers: assessment of some "critical" steps.

The aim of the research was to investigate three "critical steps" that deserve particular attention during the mechanochemical activation of vincamine. The first step consisted in the selection of the best polymeric carrier/most affine stabiliser between linear PVP and NaCMC by using the GRID and the GRID based AutoDock software packages which permit to calculate their surface features and interactions. Moreover, the calculation of the partial and total solubility parameters supported the results obtained by GRID and AutoDock software. Then, after the selection of linear PVP-K30 as the suitable carrier, the influence of process and formulation variables on the amorphisation degree and solubility enhancement was studied, to select the most suitable process conditions and formulation parameters. Subsequently, the best performing samples were widely characterised using XRPD, TEM and SSNMR (including the proton relaxation ((1)H T1 NMR) time) techniques. These studies highlighted that all the coground samples were nanocrystalline solid dispersions indicating a dramatic difference between the amorphisation capacities of linear PVP-K30 and cross-linked PVP, used in previous analogous experiences. In particular, (13)C, (15)N and (1)H T1 NMR data point to a description of the system as a dispersion of nanocrystals in the polymer. In these dispersions vincamine is in a disordered crystalline state due to extensive interactions and contacts with PVP-K30 but the main hydrogen bonding motif characterising its packing remains. Again, differently from cross-linked PVP, dissolution studies revealed that linear PVP-K30 was able to promote a complete in vitro solubilisation of vincamine in some coground samples. What is more important, by using a linear polymer, drug-to-polymer and milling time variables appeared less influent on the solid state and in vitro properties of the composites. Finally, stability studies conducted for a period of 1year highlighted the high physical stability of the selected samples.

Mechanochemically induced disordered structures of vincamine: the different mediation of two cross-linked polymers.

The aims of this research were to prepare highly bioavailable binary cogrounds (vincamine-AcDiSol(®) or PVP-Cl) by means of a mechanochemical process and to study the mediation of each polymer in the induction of physical transformations of the drug. From a set of fifteen cogrounds for each crosslinked polymer, two samples were selected in each group on the basis of the AUC of in vitro dissolution profiles with the help of a statistical comparison. The chosen samples were analysed by means of TEM, XRPD, Raman-spectroscopy/imaging, SSNMR, also including the study of (1)H spin-lattice relaxation times. The research encompassed in vivo oral absorption studies in rats, pharmacokinetic analysis and physical stability studies during 1 year. An intimate drug-polymer mixing was found in the coground samples with domain average dimensions smaller than 100 Å; this reflected in a remarkable enhancement of the in vitro and in vivo bioavailability. Different disordered states were detected in the coground samples as a function of cogrinding time and the type and amount of polymer used. Though both crosslinked polymers produced a remarkable enhancement of the oral bioavailability, coground systems based on AcDiSol(®) are preferable in terms of pharmacokinetic performance and physical stability.

Enhanced oral bioavailability of vinpocetine through mechanochemical salt formation: physico-chemical characterization and in vivo studies.

PURPOSE: Enhancing oral bioavailability of vinpocetine by forming its amorphous citrate salt through a solvent-free mechanochemical process, in presence of micronised crospovidone and citric acid. METHODS: The impact of formulation and process variables (amount of polymer and citric acid, and milling time) on vinpocetine solubilization kinetics from the coground was studied through an experimental design. The best performing samples were characterized by employing a multidisciplinary approach, involving Differential scanning calorimetry, X-ray diffraction, Raman imaging/spectroscopy, X-ray photoelectron spectroscopy, solid-state NMR spectroscopy, porosimetry and in vivo studies on rats to ascertain the salt formation, their solid-state characteristics and oral bioavailability in comparison to vinpocetine citrate salt (Oxopocetine(®)). RESULTS: The analyses attested that the mechanochemical process is a viable way to produce in absence of solvents vinpocetine citrate salt in an amorphous state. CONCLUSION: From the in vivo studies on rats the obtained salt was four times more bioavailable than its physical mixture and bioequivalent to the commercial salt produced by conventional synthetic process implying the use of solvent.

Multidisciplinary approach on characterizing a mechanochemically activated composite of vinpocetine and crospovidone.

Significant improvement of solubilization kinetics of poorly soluble vinpocetine was obtained through a mechanochemical activation process in presence of micronized crospovidone. Drug-to-polymer weight ratio and milling time variables resulted to have statistically significant impacts on the activation of the product. The complete amorphization was obtained in the coground with the highest crospovidone contents (>80% wt), milled for the longest time (180 min). An ad hoc software was then used to calculate the dimensions of the drug crystallites in the samples on the basis of the calorimetric data. The thermal analyses were then accompanied and confirmed by an extensive solid-state characterization, performing X-ray diffraction, Raman imaging/spectroscopy, DRIFT, and SS-NMR spectroscopy, followed by laser diffraction and solubilization kinetics tests. All the analyses agreed on attesting the progressive loosing of crystalline structure of the drug when increasing milling time and amount of polymer in the formulations. This activated status of the drug, which resulted to be homogeneously distributed on the coground sample and stable for at least 1 year, was reflected on favorable solubilization kinetics. The in vivo studies on rats revealed that coground systems promoted a fivefold higher oral bioavailability enhancement in comparison to a commercial formulation (Vimpocetin 5mg Capsules, Pharma).

Characterization and taste-masking evaluation of acetaminophen granules: comparison between different preparation methods in a high-shear mixer.

The aim of this study was to prepare and to investigate acetaminophen taste-masked granules obtained in a high-shear mixer using three different wet granulation methods (method A: water granulation, method B: granulation with a polyvinylpyrrolidone (PVP) binding solution and method C: steam granulation). The studied formulation was: acetaminophen 15%, alpha-lactose monohydrate 30%, cornstarch 45%, polyvinylpyrrolidone K30 5% and orange flavour 5% (w/w). In vitro dissolution studies, performed at pH 6.8, showed that steam granules enabled the lower dissolution rate in comparison to the water and binding solution granules; these results were then confirmed by their lower surface reactivity (D(R)) during the dissolution process. Moreover, the results of the gustatory sensation test performed by six volunteers confirmed the taste-masking effects of the granules, especially steam granules (P<0.001). Morphological, fractal and porosity analysis were then performed to explain the dissolution profiles and the results of the gustatory sensation test. Scanning electron microscopy (SEM) analysis revealed the smoother and the more regular surface of steam granules with respect to the samples obtained using methods A and B; these results were also confirmed by their lower fractal dimension (D(s)) and porosity values. Finally, differential scanning calorimetry (DSC) results showed a shift of the melting point of the drug, which was due to the simple mixing of the components and not to the granulation processes. In conclusion, the steam granulation technique resulted a suitable method to comply the purpose of this work, without modifying the availability of the drug.