Fluoride releasing in polymer blends of poly(ethylene oxide) and poly(methyl methacrylate).

Introduction: Polymethyl methacrylate is a polymer commonly used in clinical dentistry, including denture bases, occlusal splints and orthodontic retainers. Methods: To augment the polymethyl methacrylate-based dental appliances in counteracting dental caries, we designed a polymer blend film composed of polymethyl methacrylate and polyethylene oxide by solution casting and added sodium fluoride. Results: Polyethylene oxide facilitated the dispersion of sodium fluoride, decreased the surface average roughness, and positively influenced the hydrophilicity of the films. The blend film made of polymethyl methacrylate, polyethylene oxide and NaF with a mass ratio of 10: 1: 0.3 showed sustained release of fluoride ions and acceptable cytotoxicity. Antibacterial activity of all the films to Streptococcus mutans was negligible. Discussion: This study demonstrated that the polymer blends of polyethylene oxide and polymethyl methacrylate could realize the relatively steady release of fluoride ions with high biocompatibility. This strategy has promising potential to endow dental appliances with anti-cariogenicity.

Star-shaped porous nitrogen-doped metal-organic framework carbon as an electrochemical platform for sensitive determination of Cd(II) in environmental and tobacco samples.

In this study, cetyltrimethylammonium bromide and zeolitic imidazolate framework-8 (ZIF-8) were first assembled via the chemical co-precipitation, and high-quality carbon-based metal-free nanomaterials were synthesized using a heat-treatment process. The internal and morphological characteristics of hexagonal Star ZIF-8 were investigated using scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The electrochemical sensor with a good response to Cd(II) was prepared via square-wave anodic stripping voltammetry (SWASV) with Star ZIF-8 nanomaterial-modified glassy carbon electrodes. The main parameters were adjusted to obtain the optimal stripping response and a wide linear range. Concurrently, under the calculation of SWASV, the sensitivity of Star ZIF-8-Nafion/GCE to Cd(II) was increased by five orders of magnitude (0.5-230 µg/L), and the determination level was even low to 0.48 µg/L. Based on the high anti-interference ability and stability of the sensor, the application potential of Star ZIF-8 carbon-based metal-free nanomaterials for the detection of trace Cd(II) in was confirmed.

Mesoporous carbon decorated with MIL-100(Fe) as an electrochemical platform for ultrasensitive determination of trace cadmium and lead ions in surface water.

In this work, MIL-100(Fe)-decorated mesoporous carbon powders (MC@MIL-100(Fe)) were prepared by in situ growth of MIL-100(Fe) on the surface of ZIF-8 framework-based mesoporous carbons (MC). The hybrid material was characterized using SEM equipped with EDS mapping for morphology investigation, X-ray photoelectron spectroscopy for chemical valence analysis, and X-ray diffraction for crystal structure determination. The developed sensor separated from the traditional bismuth film decoration, and simultaneously, MC@MIL-100(Fe) was applied for the first time to electrochemically detect trace amounts of Pb(II) and Cd(II). The fabricated MC@MIL-100(Fe)-based electrochemical sensor showed excellent response to the target analytes at -0.55 and - 0.75 V for lead and cadmium ions, respectively. By adjusting some measurement parameters, that is, the loading concentration of MC@MIL-100(Fe), acidity of the HAc-NaAc buffer (ABS), deposition potential, and deposition time, the analytical performance of the proposed electrochemical sensor was examined by exploring the calibration curve, repeatability, reproducibility, stability, and anti-interference under optimized conditions. The response current of the proposed MC@MIL-100(Fe) electrochemical sensor showed a well-defined linear relationship in the concentration ranges of 2-250 and 2-270 µg·L-1 for Cd(II) and Pb(II), respectively. In addition, the detection limits of the sensor for Cd(II) and Pb(II) were 0.18 and 0.15 µg L-1, respectively, which are well below the World Health Organization (WHO) drinking water guideline value. The MC@MIL-100(Fe) can be potentially used as an electrochemical platform for monitoring heavy metals in surface water, with satisfactory results.

Nickel-induced charge redistribution in Ni-Fe/Fe3C@nitrogen-doped carbon nanocage as a robust Mott-Schottky bi-functional oxygen catalyst for rechargeable Zn-air battery.

Designing earth-abundant and advanced bi-functional oxygen electrodes for efficient oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are extremely urgent but still ambiguous. Thus, metal-semiconductor nanohybrids were developed with functionally integrating ORR-active Ni species, OER-active Fe/Fe3C components, and multifunctional N-doped carbon (NDC) support. Expectantly, the resulted NDC nanocage embedded with Ni-Fe alloy and Fe3C particles, as assembled Mott-Schottky-typed catalyst, delivered a promoted half-wave potential of 0.904 V for ORR and a low overpotential of 315 mV at 10 mA/cm2 for OER both in alkaline media, outperforming those of commercial Pt/C and RuO2 counterparts. Most importantly, the optimized Ni-Fe/Fe3C@NDC sample also afforded a peak power density of 267.5 mW/cm2 with a specific capacity of 773.8 mAh/gZn and excellent durability over 80 h when used as the air electrode in rechargeable Zn-air batteries, superior to the state-of-the-art bi-functional catalysts. Ultraviolet photoelectron spectroscopy revealed that the introduction of Ni into the Fe/Fe3C@NDC component could well manipulate the electronic structure of the designed electrocatalyst, leading to an effective built-in electric field established by the Mott-Schottky heterojunction to expedite the continuous interfacial charge-transfer and thus significantly promote the utilization of electrocatalytic active sites. Therefore, this work provides an avenue for the designing and developing robust and durable Mott-Schottky-typed bi-functional catalysts for promising energy conversion.

Stainless Steel as A Bi-Functional Electrocatalyst-A Top-Down Approach.

For a hydrogen economy to be viable, clean and economical hydrogen production methods are vital. Electrolysis of water is a promising hydrogen production technique with zero emissions, but suffer from relatively high production costs. In order to make electrolysis of water sustainable, abundant, and efficient materials has to replace expensive and scarce noble metals as electrocatalysts in the reaction cells. Herein, we study activated stainless steel as a bi-functional electrocatalyst for the full water splitting reaction by taking advantage of nickel and iron suppressed within the bulk. The final electrocatalyst consists of a stainless steel mesh with a modified surface of layered NiFe nanosheets. By using a top down approach, the nanosheets stay well anchored to the surface and maintain an excellent electrical connection to the bulk structure. At ambient temperature, the activated stainless steel electrodes produce 10 mA/cm2 at a cell voltage of 1.78 V and display an onset for water splitting at 1.68 V in 1M KOH, which is close to benchmarking nanosized catalysts. Furthermore, we use a scalable activation method using no externally added electrocatalyst, which could be a practical and cheap alternative to traditionally catalyst-coated electrodes.

Synthesis of an iron-nitrogen co-doped ordered mesoporous carbon-silicon nanocomposite as an enhanced electrochemical sensor for sensitive and selective determination of chloramphenicol.

In this study, we developed a sensitive electrochemical sensor for the detection of chloramphenicol (CAP). An iron-nitrogen co-doped ordered mesoporous carbon-silicon nanocomposite (Si-Fe/NOMC) was prepared as follows. First, an SBA-15 surface was treated with an iron and nitrogen co-doped carbon framework obtained from the polymerization of ethylenediamine and carbon tetrachloride via the hard templating method. The mixture was then carbonized at a high temperature (900℃). Finally, the Si-Fe/NOMC modified electrode was fabricated, and employed as a high-performance electrochemical sensor to trace the CAP in drug samples using the large surface area of the hetero-atoms iron, nitrogen and silicon co-doped in the porous structure. Cyclic voltammetry and differential pulse voltammetry tests were determine to assess the efficiency of the sensor. Under optimized conditions, the sensor exhibited rapid current response for CAP in a phosphate buffer solution PBS with pH 7.5. The linear concentration of CAP ranged from 1 µM to 500 µM, with a limit of detection of 0.03 µM (S/N = 3). Furthermore, the electrochemical sensor was used to detect CAP in eye drop samples with satisfactory results.

A Facile Electrochemical Sensor Based on PyTS⁻CNTs for Simultaneous Determination of Cadmium and Lead Ions.

A simple and easy method was implemented for the contemporary detection of cadmium (Cd2+) and lead (Pb2+) ions using 1,3,6,8-pyrenetetrasulfonic acid sodium salt-functionalized carbon nanotubes nanocomposites (PyTS⁻CNTs). The morphology and composition of the obtained PyTS⁻CNTs were characterized using scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), and X-ray photoelectron spectroscopy (XPS). The experimental results confirmed that the fabricated PyTS⁻CNTs exhibited good selectivity and sensitivity for metal ion-sensing owing to the insertion of sulfonic acid groups. For Cd2+ and Pb2+, some of the electrochemical sensing parameters were evaluated by varying data such as the PyTS⁻CNT quantity loaded on the pyrolytic graphite electrode (PGE), pH of the acetate buffer, deposition time, and deposition potential. These parameters were optimized with differential pulse anodic sweeping voltammetry (DPASV). Under the optimal condition, the stripping peak current of the PyTS⁻CNTs/Nafion/PGE varies linearly with the heavy metal ion concentration, ranging from 1.0 µg L-1 to 90 µg L-1 for Cd2+ and from 1.0 µg L-1 to 110 µg L-1 for Pb2+. The limits of detection were estimated to be approximately 0.8 µg L-1 for Cd2+ and 0.02 µg L-1 for Pb2+. The proposed PyTS⁻CNTs/Nafion/PGE can be used as a rapid, simple, and controllable electrochemical sensor for the determination of toxic Cd2+ and Pb2+.

Fabrication of microporous layer - free hierarchical gas diffusion electrode as a low Pt-loading PEMFC cathode by direct growth of helical carbon nanofibers.

Improving interfacial contact between each component in the proton exchange membrane fuel cell (PEMFC) can lead to a significant increase in power density and Pt utilization. In this work, the junction between the catalyst layer and gas diffusion layer (GDL) is greatly enhanced through direct attachment of helical carbon nanofibers, giving rise to a hierarchical structure within the electrical interconnections. The alternative novel GDL is produced by spraying a thin layer of Pd2C60 precursor on commercial carbon paper, followed by chemical vapor deposition growth resulting in a surface morphology of well-attached nanofibers surrounding the microfibers present in the commercial carbon paper. Subsequent solvothermal deposition of platinum nanoparticles allowed evaluation of its suitability as gas diffusion electrode in cathodic H2/O2 PEMFC environment. A combination of lowered charge transfer resistance and enhanced Pt-utilization is attributed to its unique wire-like appearance and its robust properties. The fabricated microporous layer - free GDL is suitable for relatively aggressive membrane electrode assembly fabrication procedures and is produced by industrially favorable techniques, rendering it capable of efficiently supporting small amounts of precious metal catalyst nanoparticles in various PEM applications.

Cationic Vacancy Defects in Iron Phosphide: A Promising Route toward Efficient and Stable Hydrogen Evolution by Electrochemical Water Splitting.

Engineering the electronic properties of transition metal phosphides has shown great effectiveness in improving their intrinsic catalytic activity for the hydrogen evolution reaction (HER) in water splitting applications. Herein, we report for the first time, the creation of Fe vacancies as an approach to modulate the electronic structure of iron phosphide (FeP). The Fe vacancies were produced by chemical leaching of Mg that was introduced into FeP as "sacrificial dopant". The obtained Fevacancy-rich FeP nanoparticulate films, which were deposited on Ti foil, show excellent HER activity compared to pristine FeP and Mg-doped FeP, achieving a current density of 10 mA cm-2 at overpotentials of 108 mV in 1 m KOH and 65 mV in 0.5 m H2 SO4 , with a near-100 % Faradaic efficiency. Our theoretical and experimental analyses reveal that the improved HER activity originates from the presence of Fe vacancies, which lead to a synergistic modulation of the structural and electronic properties that result in a near-optimal hydrogen adsorption free energy and enhanced proton trapping. The success in catalytic improvement through the introduction of cationic vacancy defects has not only demonstrated the potential of Fe-vacancy-rich FeP as highly efficient, earth abundant HER catalyst, but also opens up an exciting pathway for activating other promising catalysts for electrochemical water splitting.