Conceptualizing Scaffold Guided Breast Tissue Regeneration in a Preclinical Large Animal Model.

Scaffold-guided breast tissue regeneration (SGBTR) can transform both reconstructive and cosmetic breast surgery. Implant-based surgery is the most common method. However, there are inherent limitations, as it involves replacement of tissue rather than regeneration. Regenerating autologous soft tissue has the potential to provide a more like-for-like reconstruction with minimal morbidity. Our SGBTR approach regenerates soft tissue by implanting additively manufactured bioresorbable scaffolds filled with autologous fat graft. A pre-clinical large animal study was conducted by implanting 100 mL breast scaffolds (n = 55) made from medical-grade polycaprolactone into 11 minipigs for 12 months. Various treatment groups were investigated where immediate or delayed autologous fat graft, as well as platelet rich plasma, were added to the scaffolds. Computed tomography and magnetic resonance imaging were performed on explanted scaffolds to determine the volume and distribution of the regenerated tissue. Histological analysis was performed to confirm the tissue type. At 12 months, we were able to regenerate and sustain a mean soft tissue volume of 60.9 ± 4.5 mL (95% CI) across all treatment groups. There was no evidence of capsule formation. There were no immediate or long-term post-operative complications. In conclusion, we were able to regenerate clinically relevant soft tissue volumes utilizing SGBTR in a pre-clinical large animal model.

Radiologically derived 3D virtual models for neurosurgical planning.

Three dimensional (3D) virtual models for neurosurgery have demonstrated substantial clinical utility, especially for neuro-oncological cases. Computer-aided design (CAD) modelling of radiological images can provide realistic and high-quality 3D models which neurosurgeons may use pre-operatively for surgical planning. 3D virtual models are useful as they are the basis for other models that build off this design. 3D virtual models are quick to segment but can also be easily added to normal neurosurgical and radiological workflow without disruption. Three anatomically complex neuro-oncology cases that were referred from a single institution by three different neurosurgeons were segmented and 3D virtual models were created for pre-operative surgical planning. A face-to-face interview was performed with the surgeons after the models were delivered to gauge the usefulness of the model in pre-surgical planning. All three neurosurgeons found that the 3D virtual model was useful for presurgical planning. Specifically, the virtual model helped in planning operative positioning, understanding spatial relationship between lesion and surrounding critical anatomy and identifying anatomy that will be encountered intra-operatively in a sequential manner. It provided benefit in Multidisciplinary team (MDT) meetings and patient education for shared decision making.3D virtual models are beneficial for pre-surgical planning and patient education for shared decision making for neurosurgical neuro-oncology cases. We believe this could be further expanded to other surgical specialties. The integration of 3D virtual models into normal workflow as the initial step will provide an easier transition into modalities that build off the virtual models such as printed, virtual, augmented and mixed reality models.

Convergence of scaffold-guided bone regeneration principles and microvascular tissue transfer surgery.

A preclinical evaluation using a regenerative medicine methodology comprising an additively manufactured medical-grade ε-polycaprolactone ß-tricalcium phosphate (mPCL-TCP) scaffold with a corticoperiosteal flap was undertaken in eight sheep with a tibial critical-size segmental bone defect (9.5 cm3, M size) using the regenerative matching axial vascularization (RMAV) approach. Biomechanical, radiological, histological, and immunohistochemical analysis confirmed functional bone regeneration comparable to a clinical gold standard control (autologous bone graft) and was superior to a scaffold control group (mPCL-TCP only). Affirmative bone regeneration results from a pilot study using an XL size defect volume (19 cm3) subsequently supported clinical translation. A 27-year-old adult male underwent reconstruction of a 36-cm near-total intercalary tibial defect secondary to osteomyelitis using the RMAV approach. Robust bone regeneration led to complete independent weight bearing within 24 months. This article demonstrates the widely advocated and seldomly accomplished concept of "bench-to-bedside" research and has weighty implications for reconstructive surgery and regenerative medicine more generally.

Protocol for the BONE-RECON trial: a single-arm feasibility trial for critical sized lower limb BONE defect RECONstruction using the mPCL-TCP scaffold system with autologous vascularised corticoperiosteal tissue transfer.

INTRODUCTION: Reconstruction of critical bone defects is challenging. In a substantial subgroup of patients, conventional reconstructive techniques are insufficient. Biodegradable scaffolds have emerged as a novel tissue engineering strategy for critical-sized bone defect reconstruction. A corticoperiosteal flap integrates the hosts' ability to regenerate bone and permits the creation of a vascular axis for scaffold neo-vascularisation (regenerative matching axial vascularisation-RMAV). This phase IIa study evaluates the application of the RMAV approach alongside a custom medical-grade polycaprolactone-tricalcium phosphate (mPCL-TCP) scaffold (Osteopore) to regenerate bone sufficient to heal critical size defects in lower limb defects. METHODS AND ANALYSIS: This open-label, single-arm feasibility trial will be jointly coordinated by the Complex Lower Limb Clinic (CLLC) at the Princess Alexandra Hospital in Woolloongabba (Queensland, Australia), the Australian Centre for Complex Integrated Surgical Solutions (Queensland, Australia) and the Faculty of Engineering, Queensland University of Technology in Kelvin Grove (Queensland, Australia). Aiming for limb salvage, the study population (n=10) includes any patient referred to the CLLC with a critical-sized bone defect not amenable to conventional reconstructive approaches, after discussion by the interdisciplinary team. All patients will receive treatment using the RMAV approach using a custom mPCL-TCP implant. The primary study endpoint will be safety and tolerability of the reconstruction. Secondary end points include time to bone union and weight-bearing status on the treated limb. Results of this trial will help shape the role of scaffold-guided bone regenerative approaches in complex lower limb reconstruction where current options remain limited. ETHICS AND DISSEMINATION: Approval was obtained from the Human Research Ethics Committee at the participating centre. Results will be submitted for publication in a peer-reviewed journal. TRIAL REGISTRATION NUMBER: ACTRN12620001007921.

Limb salvage surgery reconstructive techniques following long-bone lower limb oncological resection: a systematic review and meta-analysis.

BACKGROUND: Limb salvage surgery (LSS) is now considered the gold standard surgical treatment for lower limb bone sarcomas. However, there is a paucity of literature comparing the various LSS reconstructive options. The aim of this systematic review and meta-analysis was to compare functional outcomes and complications of LSS reconstructive techniques. METHODS: The primary aim of the meta-analysis was to determine functional outcomes from the pooled data utilizing the Musculoskeletal Tumour Society score (MSTS). Comparisons could then made for this outcome between biological and prosthetic, vascularised and non-vascularised, and prosthetic and composite reconstructions. The secondary aim was to compare complication outcomes of each reconstruction. Standardized mean difference (Cohen's d) and odds ratios were estimated using a random effects model. RESULTS: Fourteen studies with a total of 785 patients were included. We found structural failure was 75% less likely to occur in prosthetic reconstruction compared to biological (OR = 0.24; 95% CI: 0.07-0.79; P = 0.02). We did not find any evidence of difference in function (MSTS score) between vascularised verses non-vascularised reconstructions (Cohen's d = -1.14; 95% CI = -3.06 to 0.78; I2  = 87%). Other analyses comparing complications found no difference between the reconstructive groups. CONCLUSION: The study found no correlation between functional outcomes and the type of LSS reconstruction. Structural failure was more likely to occur in biological when compared with prosthetic reconstruction. There was no correlation between the incidence of other complications and the type of LSS technique. This suggests a role for improved approaches to reconstruction methods including bioprinting and bioresorbable devices.

A Medical-Grade Polycaprolactone and Tricalcium Phosphate Scaffold System With Corticoperiosteal Tissue Transfer for the Reconstruction of Acquired Calvarial Defects in Adults: Protocol for a Single-Arm Feasibility Trial.

BACKGROUND: Large skull defects present a reconstructive challenge. Conventional cranioplasty options include autologous bone grafts, vascularized bone, metals, synthetic ceramics, and polymers. Autologous options are affected by resorption and residual contour deformities. Synthetic materials may be customized via digital planning and 3D printing, but they all carry a risk of implant exposure, failure, and infection, which increases when the defect is large. These complications can be a threat to life. Without reconstruction, patients with cranial defects may experience headaches and stigmatization. The protection of the brain necessitates lifelong helmet use, which is also stigmatizing. OBJECTIVE: Our clinical trial will formally study a hybridized technique's capacity to reconstruct large calvarial defects. METHODS: A hybridized technique that draws on the benefits of autologous and synthetic materials has been developed by the research team. This involves wrapping a biodegradable, ultrastructured, 3D-printed scaffold made of medical-grade polycaprolactone and tricalcium phosphate in a vascularized, autotransplanted periosteum to exploit the capacity of vascularized periostea to regenerate bone. In vitro, the scaffold system supports cell attachment, migration, and proliferation with slow but sustained degradation to permit host tissue regeneration and the replacement of the scaffold. The in vivo compatibility of this scaffold system is robust-the base material has been used clinically as a resorbable suture material for decades. The importance of scaffold vascularization, which is inextricably linked to bone regeneration, is underappreciated. A variety of methods have been described to address this, including scaffold prelamination and axial vascularization via arteriovenous loops and autotransplanted flaps. However, none of these directly promote bone regeneration. RESULTS: We expect to have results before the end of 2023. As of December 2020, we have enrolled 3 participants for the study. CONCLUSIONS: The regenerative matching axial vascularization technique may be an alternative method of reconstruction for large calvarial defects. It involves performing a vascularized free tissue transfer and using a bioresorbable, 3D-printed scaffold to promote and support bone regeneration (termed the regenerative matching axial vascularization technique). This technique may be used to reconstruct skull bone defects that were previously thought to be unreconstructable, reduce the risk of implant-related complications, and achieve consistent outcomes in cranioplasty. This must now be tested in prospective clinical trials. TRIAL REGISTRATION: Australian New Zealand Clinical Trials Registry ACTRN12620001171909; https://tinyurl.com/4rakccb3. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/36111.

Regenerative matching axial vascularisation of absorbable 3D-printed scaffold for large bone defects: A first in human series.

BACKGROUND: We describe the first clinical series of a novel bone replacement technique based on regenerative matching axial vascularisation (RMAV). This was used in four cases: a tibial defect after treatment of osteomyelitis; a calvarial defect after trauma and failed titanium cranioplasty; a paediatric tibial defect after neoadjuvant chemotherapy and resection of Ewing sarcoma; and a paediatric mandibular deficiency resulting from congenital hemifacial microsomia. METHOD: All patients underwent reconstruction with three-dimensional (3D)-printed medical-grade polycaprolactone and tricalcium phosphate (mPCL-TCP) scaffolds wrapped in vascularised free corticoperiosteal flaps. OUTCOME: Functional volumes of load-sharing regenerate bone have formed in all cases after a moderate duration of follow-up. At 36 cm, case 1 remains the longest segment of load bearing bone ever successfully reconstructed. This technique offers an alternative to existing methods of large volume bone defect reconstruction that may be safe, reliable, and give predictable outcomes in challenging situations. It achieves this by using a bioresorbable scaffold to support and direct the growth of regenerate bone, driven by RMAV. CONCLUSION: This technique may facilitate the reconstruction of bone defects previously thought unreconstructable, reduce the risk of long-term implant-related complications and achieve these outcomes in a hostile environment. These potential benefits must now be formally tested in prospective clinical trials.

Microsurgical anastomosis using anterior versus posterior tibial artery in lower limb free tissue transfer.

BACKGROUND: Soft tissue lower limb reconstruction often requires free tissue transfer. We investigated whether the target vessels used for micro-vascular anastomosis in the lower limb influences microsurgical outcomes. METHODS: Data from Plastic Surgery Departments of a major tertiary hospital in the United Kingdom (Leeds General Infirmary, LGI) and Australia (Princess Alexandra Hospital, PAH) were retrospectively analysed. Patients who underwent lower limb free flap reconstruction using the posterior (PTA) or anterior tibial artery (ATA) were included. Patient demographics, free flap and microvascular anastomosis details were analysed. Primary outcome was flap failure. Secondary outcome was return to theatre. RESULTS: Two hundred and thirty-four free flaps were included (PAH 115; LGI 119). 60% were muscle flaps. Eighty-one percent of patients were male, with trauma the cause in 82%. PTA was used for microsurgical anastomosis in 70% of cases. Venae comitantes were preferred (96%) for venous anastomosis. PTA group showed a higher proportion of patients with trauma as the mechanism of injury. ATA group was more likely to have an end-to-end arterial anastomosis configuration. Total flap loss was 3.8%. There was no clinically significant difference in flap failure or return to theatre using ATA versus PTA. CONCLUSIONS: Incidence of lower limb free flap failure is low (<5%) and not influenced by use of ATA versus PTA for microsurgical anastomosis. The choice of target vessels for microsurgical reconstruction of the lower limb should be predicated upon factors other than aversion to one or another vessel. If all other microsurgical considerations are equal, the surgeon can exercise personal preference.

The Vertical Rectus Abdominis Myocutaneous Flap to Manage Vaginal Evisceration.

BACKGROUND: Pelvic organ prolapse (POP) is a significant issue requiring surgical correction in 19% of the female population by age 85 years. Complications of POP, especially in women who have undergone hysterectomy, include vaginal evisceration-a serious complication that carries high morbidity and mortality rates. Rarely, vaginal evisceration occurs after colpocleisis. CASE: A 69-year-old female with recurrent vaginal evisceration following colpocleisis underwent surgical repair using a vertical rectus abdominis myocutaneous (VRAM) flap. CONCLUSION: Recurrent cases of POP and vaginal evisceration that are refractory to conventional treatment require consideration of novel management options. To our knowledge, this is the first case using a VRAM flap for the management of vaginal evisceration.

Biomechanical Principles of Breast Implants and Current State of Research in Soft Tissue Engineering for Cosmetic Breast Augmentation.

Currently there are limited implant-based options for cosmetic breast augmentation, and problems associated with those have been increasingly appreciated, most commonly capsular contracture, which occurs due to a chronic foreign body reaction against non-degradable implant materials such as silicone and polyurethane leading to scar tissue formation, pain, and deformity. The underlying biomechanical concepts with implants create a reciprocal stress-strain relationship with local tissue, whilst acting as a deforming force. This means that with time, as the implant continues to have an effect on surrounding tissue the implant and host's biomechanical properties diverge, making malposition, asymmetry, and other complications more likely. Research directed towards development of alternative therapies based on tissue engineering and regenerative medicine seeks to optimize new tissue formation through modulation of tissue progenitors and facilitating tissue regeneration. Scaffolds can guide the process of new tissue formation by providing both an implant surface and a three-dimensional space that promotes the development of a microenvironment that guides attachment, migration, proliferation, and differentiation of connective tissue progenitors. Important to scaffold design are the architecture, surface chemistry, mechanical properties, and biomaterial used. Scaffolds provide a void in which vascularization, new tissue formation, and remodelling can sequentially occur. They provide a conduit for delivery of the different cell types required for tissue regeneration into a graft site, facilitating their retention and distribution. Whilst recent research from a small number of groups is promising, there are still ongoing challenges to achieving clinical translation. This article summarizes the biomechanical principles of breast implants, how these impact outcomes, and progress in scaffold-guided tissue engineering approaches to cosmetic breast augmentation. LEVEL OF EVIDENCE V: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

A Preclinical Animal Model for the Study of Scaffold-Guided Breast Tissue Engineering.

Scaffold-guided breast tissue engineering (SGBTE) has the potential to transform reconstructive breast surgery. Currently, there is a deficiency in clinically relevant animal models suitable for studying novel breast tissue engineering concepts. To date, only a small number of large animal studies have been conducted and characterization of these large animal models is poorly described in the literature. Addressing this gap in the literature, this publication comprehensively describes our original porcine model based on the current published literature and the experience gained from previous animal studies conducted by our research group. In a long-term experiment using our model, we investigated our SGBTE approach by implanting 60 additively manufactured bioresorbable scaffolds under the panniculus carnosus muscle along the flanks of 12 pigs over 12 months. Our model has the flexibility to compare multiple treatment modalities where we successfully investigated scaffolds filled with various treatments of immediate and delayed fat graft and augmentation with platelet rich plasma. No wound complications were observed using our animal model. We were able to grow clinically relevant volumes of soft tissue, which validates our model. Our preclinical large animal model is ideally suited to assess different scaffold or hydrogel-driven soft tissue regeneration strategies. Impact statement The ability to regenerate soft tissue through scaffold-guided tissue engineering concepts can transform breast reconstructive surgery. We describe an original preclinical large animal model to study controlled and reproducible scaffold-guided breast tissue engineering (SGBTE) concepts. This model features the flexibility to investigate multiple treatment conditions per animal, making it an efficient model. We have validated our model with a long-term experiment over 12 months, which exceeds other shorter published studies. Our SGBTE concept provides a more clinically relevant approach in terms of breast reconstruction. Future studies using this model will support the translation of SGBTE into clinical practice.

Subtype-Specific Analyses Reveal Infiltrative Basal Cell Carcinomas Are Highly Interactive with their Environment.

Little is known regarding the molecular differences between basal cell carcinoma (BCC) subtypes, despite clearly distinct phenotypes and clinical outcomes. In particular, infiltrative BCCs have poorer clinical outcomes in terms of response to therapy and propensity for dissemination. In this project, we aimed to use exome sequencing and RNA sequencing to identify somatic mutations and molecular pathways leading to infiltrative BCCs. Using whole-exome sequencing of 36 BCC samples (eight infiltrative) combined with previously reported exome data (58 samples), we determine that infiltrative BCCs do not contain a distinct somatic variant profile and carry classical UV-induced mutational signatures. RNA sequencing on both datasets revealed key differentially expressed genes, such as POSTN and WISP1, suggesting increased integrin and Wnt signaling. Immunostaining for periostin and WISP1 clearly distinguished infiltrative BCCs, and nuclear ß-catenin staining patterns further validated the resulting increase in Wnt signaling in infiltrative BCCs. Of significant interest, in BCCs with mixed morphology, infiltrative areas expressed WISP1, whereas nodular areas did not, supporting a continuum between subtypes. In conclusion, infiltrative BCCs do not differ in their genomic alteration in terms of initiating mutations. They display a specific type of interaction with the extracellular matrix environment regulating Wnt signaling.

Detection rates of missing microsurgical needles using intra-operative imaging.

BACKGROUND: Unintentional retention of foreign bodies in surgery is uncommon but potentially serious. Published data regarding the consequence of retained surgical needles is sparse. We aimed to characterize lost surgical needles at our institution. Secondarily, we aimed to determine whether or not retained microsurgical needles can be reliably detected. METHODS: Reports of missing surgical needles at our institution were reviewed. Surgical needles of relevant sizes were scattered across an anthropomorphic model at representative anatomical locations. Fluoroscopic images of the field were acquired using two resolution settings. Medical staff in our department attempted to locate needles in these images. RESULTS: A total of 46 323 procedures were performed in the main theatres in the 2.5-year period. Sixty-two needles were reported as missing. No patient harm was documented. Needles of chord length 16 mm (5-0) or greater were always detected. High-resolution fluoroscopy improves detection of needles with chord lengths of 9.3 (7-0) or 6.6 mm (9-0). Needles are consistently better detected in the lower limb for needles of chord length greater than 6.6 mm (9-0). Senior observers under ideal conditions can detect 7.1% of smaller needles. CONCLUSION: When a needle is lost during surgery, consider the following before ordering fluoroscopy. Needles of chord length greater than 13 mm (6-0) should be reliably detected whilst 3.8 mm (10-0) needles will not. For sizes in between, ideal conditions for detection may include an operating field in the lower limb, high-resolution fluoroscopy and a senior observer. It may not be necessary or cost effective to identify microsurgical needles with fluoroscopy.

A preclinical large-animal model for the assessment of critical-size load-bearing bone defect reconstruction.

Critical-size bone defects, which require large-volume tissue reconstruction, remain a clinical challenge. Bone engineering has the potential to provide new treatment concepts, yet clinical translation requires anatomically and physiologically relevant preclinical models. The ovine critical-size long-bone defect model has been validated in numerous studies as a preclinical tool for evaluating both conventional and novel bone-engineering concepts. With sufficient training and experience in large-animal studies, it is a technically feasible procedure with a high level of reproducibility when appropriate preoperative and postoperative management protocols are followed. The model can be established by following a procedure that includes the following stages: (i) preoperative planning and preparation, (ii) the surgical approach, (iii) postoperative management, and (iv) postmortem analysis. Using this model, full results for peer-reviewed publication can be attained within 2 years. In this protocol, we comprehensively describe how to establish proficiency using the preclinical model for the evaluation of a range of bone defect reconstruction options.

A systematic review and meta-analysis of locoregional treatments for in-transit melanoma.

BACKGROUND AND OBJECTIVES: In-transit melanoma (ITM) metastases present a therapeutic challenge and management decisions can be difficult. There are multiple treatments available, with differing efficacy, and supported by different levels of evidence. The primary objective was to perform a systematic review and where suitable, a meta-analysis of the literature reporting on the use of locoregional treatments for the management of ITM. METHODS: An independent review was conducted including a comprehensive search of the National Library of Medicine using PubMed, MEDLINE, Embase, and Cochrane Library databases. Key data were tabulated, synthesized and pooled to calculate relevant weighted effect sizes for each therapy using random-effect models. The statistical heterogeneity was calculated using the Higgins' method. RESULTS: Of the initial 32 612 articles identified, 57 original articles satisfied eligibility criteria. Eight treatment modalities were identified comprising: amputation (7); hyperthermic isolated limb perfusion (15); isolated limb infusion (8); carbon dioxide laser (9); PV-10 intralesional therapy (5); IL-2 intralesional therapy (8); imiquimod (7); diphenylcyclopropenone (3). Only amputation and topical imiquimod were suitable for formal meta-analysis. CONCLUSIONS: All of the assessed therapies have significant selection bias. Variable levels of evidence support the ongoing use of locoregional treatments and these may significantly improve disease-free survival.

Patients with in-transit melanoma metastases have comparable survival outcomes following isolated limb infusion or intralesional PV-10-A propensity score matched, single center study.

BACKGROUND AND OBJECTIVE: Isolated limb infusion (ILI) and intralesional PV-10 are well described locoregional therapies for in-transit melanoma. The objective of this study was to assess the effect of these treatments on survival outcomes within a cohort matched for key characteristics. METHODS: Patients were treated using ILI or intralesional PV-10 at a single institution and the data prospectively recorded. Propensity score matching was performed using key covariates within a logistic regression model. The primary outcome was the melanoma-specific survival. RESULTS: Seventy-two patients nonrandomized were successfully matched. Both treatments produced similar best overall responses. The median melanoma-specific survival (MSS) was 74.4 months from ILI and 36.4 months from PV-10 treatments (P = 0.164). Within the ILI subgroup, the 12-, 24-, 36- and 60-month MSS rates were 85.3%, 75.3%, 60.1%, and 60.1%, respectively. From the time of PV-10 the corresponding 12-, 24-, 36-, and 60-month MSS rates were 82.6%, 70.0%, 53.9%, and 35.9%. On multivariate analysis, there was a significant difference in survival comparing completely with noncomplete responders ( P = 0.031). CONCLUSIONS: These findings demonstrate that ILI and PV-10 treatments for in-transit disease produce comparable long-term survival. Both therapies have reproducible response rates and predominantly localized and tolerable side-effects.