Platelet-Rich Plasma Lysate Enhances the Osteogenic Differentiation of Adipose-Derived Stem Cells.

ABSTRACT: Adipose-derived stem cells (ADSCs) have become an accepted source of cells in bone tissue engineering. This study aimed to investigate whether platelet-rich plasma (PRP) lysate can replace traditional fetal bovine serum as a culture medium with the enhanced proliferation and osteogenic potential of ADSCs. We divided the experiment into 5 groups where the ADSCs were cultured in an osteogenic medium containing 2.5%, 5%, 7.5%, and 10% PRP lysate with 10% fetal bovine serum as the control group. The cell proliferation, alkaline phosphatase (ALP) activity, ALP stain, alizarin red stain, osteocalcin (OCN) protein expression, and osteogenic-specific gene expression were analyzed and compared among these groups. The outcome showed that all PRP lysate-treated groups had good ALP stain and ALP activity performance. Better alizarin red stains were found in the 2.5%, 5%, and 7.5% PRP lysate groups. The 2.5% and 5% PRP lysate groups showed superior results in OCN quantitative polymerase chain reaction, whereas the 5% and 7.5% PRP lysate groups showed higher OCN protein expressions. Early RUNX2 (Runt-related transcription factor 2 () genes were the most expressed in the 5% PRP lysate group, followed by the 2.5% PRP lysate group, and then the 7.5% PRP lysate group. Thus, we concluded that 5% PRP lysate seemed to provide the optimal effect on enhancing the osteogenic potential of ADSCs. Platelet-rich plasma lysate-treated ADSCs were considered to be a good cell source for application in treating nonunion or bone defects in the future.

Chang Gung Forum: An Exemplary Strategy for Implementing a Multidisciplinary Network of Experts in Craniofacial Anomalies.

INTRODUCTION: The Chang Gung Forum has been dedicated to the care of craniofacial anomalies since 2000. This annual continuing medical education program focuses on orofacial cleft and surgery-first orthognathic surgery by providing up-to-date information and management guidelines. This study explored how the Chang Gung Forum has influenced medical perspectives, decisions, and practices in a multidisciplinary craniofacial team. METHODS: Between 2000 and 2022, 20 Chang Gung Forums have been held. A questionnaire was distributed among 170 attendees who had participated in the forum more than once. The questionnaire collected information on the participants' experiences and levels of satisfaction with the educational program and whether or how it had influenced their clinical practice. RESULTS: Valid responses from 86 attendees (response rate, 50.6%) who had participated more than once were collected and analyzed. The overall satisfaction rate of the Chang Gung Forum based on the respondents' most recent visits was 4.28 ± 0.63 out of 5. Of the respondents, 90.9% acknowledged changes in their clinical practice, with modifications in surgery plans and decisions being the most notable (48.5%). In addition, comprehension increased throughout years of attending the annual forum (P < 0.001). CONCLUSION: The Chang Gung Forum has contributed markedly to the community of congenital craniofacial anomalies. The program will continue providing updated information and influencing the clinical decision-making of health care professionals.

Development of the Customized Asymmetric Fixation Plate to Resist Postoperative Relapse of Hemifacial Microsomia Following BSSO: Topology Optimization and Biomechanical Testing.

Hemifacial microsomia (HFM), one of the most common congenital facial anomalies, was usually treated with the bilateral sagittal split osteotomy (BSSO) procedure to correct the asymmetric appearance and malocclusion of the mandible. However, the frequent post-operative relapse incidents would lead to the restoration of the mandibular segment to its preoperative position and failure of the BSSO procedure. In this study, a customized asymmetric fixed plate (CAF plate) was developed to resist relapse due to hemifacial microsomia occlusal forces and the different muscular traction forces on both sides of the mandible. For the actual HFM case in this study, the reconstructed mandibular segmental bone model was fixed using BSSO with a rectangular plate (the original CAF plate appearance) in the topology optimization analysis. With the topology optimization technique, the CAF plate was designed with a lightweight profile and excellent structural strength in consideration of the HFM asymmetrical muscle traction and occlusal force. Using biomechanical simulations, the von-Mises stress and CAF plate mandibular segment displacement and the miniplate were compared to evaluate which had superior relapse resistance. In the in-vitro biomechanical test, a fatigue force of 250,000 cycles and a constant muscle traction force were applied to the HFM mandibular model, which was fixed with the CAF plate fabricated using metal 3D printing (selective laser melting, SLM) to obtain the mandibular segment displacement as a relapse assessment. The topology optimization analysis showed that the CAF plate has the best characteristics, light weight and structural strength with 30% volume retention. The biomechanical analysis showed that the maximum von Mises stress of the mini-plate was 2.71 times higher than that of the CAF plate. The relapse displacement of the mandibular segment fixed with the mini-plate was 1.62 times higher than that fixed with the CAF plate. The CAF plate ability to resist relapse was confirmed by the biomechanical testing results so that only 0.29 mm of recurrence displacement was observed in the mandibular segment. The results indicated that the CAF plate structural strength and resistance to relapse was significantly better than that of the mini-plate. This study developed a customized asymmetric fixation plate for hemifacial microsomia, integrating topology optimization, metal 3D printing, and in vitro biomechanical testing to resist occlusal forces and differential muscle traction on both sides of the mandible to reduce relapse and improve fixation stability.

Impact of the Different Types of Le Fort I Maxillary Surgical Movement on Nasal Width Changes: A Photogrammetric Analysis.

BACKGROUND: Le Fort I maxillary movements affect nasal width, but nasal width changes with specific movement types have not been formally addressed to date. OBJECTIVES: The purpose of this study was to analyze and compare the changes in nasal width with different maxillary movements. METHODS: A retrospective study was performed among consecutive patients who underwent bimaxillary orthognathic surgery (n = 138) and who were grouped based on the type of maxillary movement (ie, maxillary advancement with intrusion [MAI], maxillary advancement with extrusion [MAE], and maxillary setback with intrusion [MSI]). Preoperative and 12-month postoperative nasal widths were analyzed photogrammetrically by 2 blinded evaluators. RESULTS: Maxillary advancement with intrusion and MAE presented a significantly (P < 0.05) higher alar base widening than MSI did, with no significant (P > 0.05) differences between MAI and MAE. Maxillary advancement movements (MAI and MAE) showed significantly (P < 0.05) higher alar base widening than maxillary setback movement (MSI). However, no significant (P > 0.05) difference was observed between maxillary intrusion (MAI and MSI) and maxillary extrusion (MAE) movements. CONCLUSIONS: This study shows that the nasal width varies distinctly depending on the type of Le Fort I maxillary surgical movement.

Objective and subjective long term outcome of maxillomandibular advancement in obstructive sleep apnea.

STUDY OBJECTIVES: To evaluate the objective and subjective long-term outcome of maxillomandibular advancement (MMA) in Far-East Asian patients with moderate to severe obstructive sleep apnea (OSA). METHODS: This is a long-term follow-up study to evaluate the treatment outcome of MMA in OSA patients by objective polysomnography (PSG) and subjective questionnaires (Pittsburgh Sleep Quality Index-PSQI, Insomnia Severity Index-ISI, Beck Anxiety Inventory-BAI, Beck Depression Inventory-BDI, Epworth Sleepiness scale-ESS, and Short Form-36 Quality of Life-SF-36). Evaluation was done before surgery and we followed these patients one and two years after surgery. We also assessed the neurocognitive function by Continuous performance test (CPT) and Wisconsin Card Sorting Test (WCST) before and after MMA. RESULTS: A total of 82 patients with OSA (female = 19) were enrolled and 53 participants (75.7% men, age 35.66 ± 11.66 years [mean ± SD], BMI = 24.80 ± 3.29) completed the two-year follow-up. The apnea-hypopnea index (AHI) decreased from a mean of 34.78 ± 26.01 to 3.61 ± 2.79 and 7.43 ± 6.70 events/hour (p = 0.007) at the first and second year evaluation. There was significant improvement in PSG (especially respiratory profile), questionnaires (PSQI and ISI total score), and neurocognitive testing (attention and executive function) after MMA. Meanwhile, no major complication such as avascular necrosis of bonny segments, facial nerve injury, blindness or compromise of airway was found after surgery. CONCLUSIONS: MMA is a clinically effective treatment for patients with moderate-to-severe OSA as demonstrated by significant long-term decrease in AHI and improvement in neurocognitive testing.

Maxillomandibular Rotational Advancement: Airway, Aesthetics, and Angle's Considerations.

Obstructive sleep apnea is a medical syndrome with multifactorial pathophysiology. Surgery can be the primary treatment option when anatomic factors are identified with narrowing at specific or general levels of pharyngeal airway. The surgeries are directed to the etiologic anatomic structure to achieve greatest effectiveness. Body weight, Mallampati scale, and tonsil grade are key evaluations to select effective surgical procedures. Surgical weight reduction, maxillomandibular advancement, and pharyngeal soft tissue surgeries are considered for the patient with obesity, maxillomandibular retrognathism, and tonsillar hypertrophy, respectively. Tailored surgical planning can meet the patients needs for airway, esthetics, and normal Angle's occlusion.

A novel anatomical thin titanium mesh plate with patient-matched bending technique for orbital floor reconstruction.

This study developed an anatomical thin titanium mesh (ATTM) plate for Asian orbital floor fracture based on the medical image database. The computer aided stamping analysis was performed on four hole/slot patterns included the control type without hole design, circular hole pattern, slot pattern and hole/slot hybrid patterns within the ATTM plate with upper/lower dies of averaged orbital cavity reconstruction models. The curved-fan ATTM plate with 0.4 mm thickness was manufactured and pre-bent using a patient matched stamping process to verify its feasibility and the interfacial fitness between the plate and bone on the orbital floor fracture model. The stamping analysis found that the hole/slot hybrid patterns design resulted in the most favorable performance among all designs owing to the lowest maximum von-Mises stress/strain and spring-back value. The interfacial adaption results test showed that the average patient-matched stamping bending gap size was only 0.821 mm and the operative time was about 8 s. This study concluded that the curved-fan ATTM plate with hole/slot hybrid pattern design and patient-matched pre-bent technique can fit the ATTM plate/orbital cavity interface well, decrease unstable fracture segment mobility and improve the overall reduction efficiency.

Development of a novel anatomical thin titanium mesh plate with reduction guidance and fixation function for Asian zygomatic-orbitomaxillary complex fracture.

For this study we developed an anatomical thin titanium mesh (ATTM) plate for Asian zygomaticomaxillary complex (ZMC) fracture repair with reduction guidance and fixation function. The ATTM plate profile was designed as an L-shape to fix at the anterior maxilla and lateral buttress of the ZMC. Computer-aided stamping analysis was performed on four screw-hole patterns in the ATTM plate - a control without screw-holes, square screw-holes, double screw-holes, and large-diameter, double screw-holes - using upper/lower dies of averaged ZMC reconstruction models. A regular ATTM plate of 0.6 mm thickness was manufactured and pre-bent using a patient-matched stamping process to verify its feasibility on three ZMC fracture models with one, two, and three fracture segments. The stamping analysis found that the double screw-holes design resulted in the most favorable performance among all the designs because of maximum von Mises stress (408 MPa) under the ultimate tensile strength. Positioning practice showed that the stamped, pre-bent ATTM plate can be used as a reduction guide to provide precise ZMC segment fixation in a completely passive fashion while limiting redundant rotation/micromovement between the separate bones in all directions. This study concluded that the ATTM plate with double screw-hole pattern design, using a patient-matched, pre-bent technique, can fit the ATTM plate/ZMC interface well, decrease mobility of unstable fracture segments, and provide good original facial contour recovery, while improving reduction efficiency.

Experience with the transparotid approach via a mini-preauricular incision for surgical management of condylar neck fractures.

INTRODUCTION: The aim of this study was to describe our experiences of a mini-preauricular transparotid approach for direct reduction and plating of condylar neck fractures. MATERIALS AND METHODS: A retrospective study was conducted on 58 patients from 2009 to 2011 with 69 condylar neck fractures in Chang Gung Memorial Hospital. The fractures were treated surgically either with a 2-cm mini-preauricular and transparotid approach in 29 patients with 36 fractures, or via endoscope-assisted intraoral, or facelift or retromandibular approaches in a control group of 29 patients with 32 fractures. The postoperative hospital stay, occlusion status, mouth opening and facial nerve and parotid gland related complications were compared between the two groups. RESULTS: In both groups around 90% of patients had good restoration of preinjury occlusion. Postoperative mouth opening was 39.8 mm and 39.9 mm in the mini-preauricular approach and the other approaches group, respectively. Facial symmetry was achieved in all of the patients. There was no incidence of facial nerve palsy, infection or hemorrhage in the mini-preauricular group. One patient in the control group had a persistent weakness due to frontal nerve palsy. CONCLUSION: Based on the results, the mini-preauricular approach can be an alternative, safe and effective method in the management of condylar neck and high subcondylar fractures.

Increasing the success of reverse sural flap from proximal part of posterior calf for traumatic foot and ankle reconstruction: patient selection and surgical refinement.

In this report, we present our experience on the use of the reverse sural flap for traumatic foot and ankle reconstruction. The patient selection and surgical refinement are discussed. From 2007 to 2010, 11 consecutive patients underwent modified reverse sural flap at the Chang Gung Memorial Hospital. The defects were located at the ankle (three cases), foot (two cases), and heel (six cases). Particular attention was paid to precise patient selection and surgical refinements. Patient selection was based on the lower limb vascular status by palpable distal pedal pulses and ankle brachial index ranging from 0.9 to 1.2. Surgical techniques were refined as precisely locating the perforators of peroneal artery, placing the skin paddle in upper third of leg for a distal region coverage, designing a 7-cm-wide adipofascial pedicle with a 2 cm skin paddle on it, preserving the mesentery structure of sural nerve and concomitant artery with or without including gastrocnemius muscles cuff, no tunneling when inset this flap and supercharging with lesser saphenous vein whenever needed. All the flaps survived completely. Only one patient required immediate anastomosis of lesser saphenous vein to local vein around defect in order to relieve the venous congestion during operation. Patients felt diminished but adequate recovery of sense of touch and temperature at the flap. Following the precise patient selection and surgical refinements, the modified reverse sural flap seemed to be a reliable and effective local flap for reconstruction of the soft tissue defects on ankle and foot.