Effective degradation of para-chloronitrobenzene through a sequential treatment using zero-valent iron reduction and Fenton oxidation.

In this study, zero-valent iron (ZVI) was used to pretreat para-chloronitrobenzene (p-CNB), and the major product was para-chloroaniline (p-CAN). By adding H(2)O(2) directly, further p-CAN degradation can be attributed to Fenton oxidation because ferrous ions (Fe(2+)) released during the ZVI corrosion could be used as an activator for H(2)O(2) decomposition. In the reduction process, the reduction efficiency of p-CNB as well as Fe(2+) concentration increased with increasing iron dosage and decreasing solution pH. Under the optimal conditions, 25 mg L(-1) of p-CNB could be transformed in 3 h when initial solution pH was 3.0 and ZVI dosage was 2.0 g L(-1). A sufficient amount of Fe(2+) (50.4 mg L(-1)) was obtained after the above reaction to activate H(2)O(2). In the Fenton process, the oxidization of p-CAN was also more effective in acidic conditions and it increased with increasing H(2)O(2) concentration. The control experiments showed that the sequential treatment was more effective than Fenton oxidation alone in treating p-CNB wastewater since the removal rate of total organic carbon (TOC) was improved by about 34%. It suggested that the amino function group is more susceptible to oxidative radical attack than the nitro function group. Therefore, sequential treatment using zero-valent iron reduction followed by Fenton oxidation is a promising method for p-CNB degradation.

Decolorization of anthraquinone dye Reactive Blue 19 by the combination of persulfate and zero-valent iron.

Decolorization of anthraquinone dye Reactive Blue 19 (RB19) with sulfate radicals generated in situ from persulfate and zero-valent iron (ZVI) was investigated. The effects of initial solution pH, initial concentration of RB19, ZVI and persulfate, reaction temperature and common dissolved anions were studied. 100% color removal efficiency and 54% TOC removal efficiency were achieved in 45 min with an initial RB19 concentration of 0.1 mM under typical conditions (pH 7.0, 0.8 g L(-1) ZVI, 10 mM persulfate and 30 C). The decolorization efficiency of RB19 increased with higher iron dosage, higher initial persulfate concentration, and higher reaction temperature. It is also an acid driven process. The decolorization process followed pseudo-first order kinetics and the activation energy was 98.1 kJ mol-1. RB19 decolorization was inhibited by common dissolved anions such as CL-, NO3-, H2PO4- and HCO3- since they reacted with sulfate radicals that retarded the oxidation process. The experiment demonstrated that the combination of persulfate and ZVI was a promising technology for the decolorization of dye wastewater.