Equipping for risk: Lessons learnt from the UK shale-gas experience on assessing environmental risks for the future geoenergy use of the deep subsurface.

findings are presented from an investigation to improve understanding of the environmental risks associated with developing an unconventional-hydrocarbons industry in the UK. The EQUIPT4RISK project, funded by UK Research Councils, focused on investigations around Preston New Road (PNR), Fylde, Lancashire, and Kirby Misperton Site A (KMA), North Yorkshire, where operator licences to explore for shale gas by hydraulic fracturing (HF) were issued in 2016, although exploration only took place at PNR. EQUIPT4RISK considered atmospheric (greenhouse gases, air quality), water (groundwater quality) and solid-earth (seismicity) compartments to characterise and model local conditions and environmental responses to HF activities. Risk assessment was based on the source-pathway-receptor approach. Baseline monitoring of air around the two sites characterised the variability with meteorological conditions, and isotopic signatures were able to discriminate biogenic methane (cattle) from thermogenic (natural-gas) sources. Monitoring of a post-HF nitrogen-lift (well-cleaning) operation at PNR detected the release of atmospheric emissions of methane (4.2 ± 1.4 t CH4). Groundwater monitoring around KMA identified high baseline methane concentrations and detected ethane and propane at some locations. Dissolved methane was inferred from stable-isotopic evidence as overwhelmingly of biogenic origin. Groundwater-quality monitoring around PNR found no evidence of HF-induced impacts. Two approaches for modelling induced seismicity and associated seismic risk were developed using observations of seismicity and operational parameters from PNR in 2018 and 2019. Novel methodologies developed for monitoring include use of machine learning to identify fugitive atmospheric methane, Bayesian statistics to assess changes to groundwater quality, a seismicity forecasting model seeded by the HF-fluid injection rate and high-resolution monitoring of soil-gas methane. The project developed a risk-assessment framework, aligned with ISO 31000 risk-management principles, to assess the theoretical combined and cumulative environmental risks from operations over time. This demonstrated the spatial and temporal evolution of risk profiles: seismic and atmospheric impacts from the shale-gas operations are modelled to be localised and short-lived, while risk to groundwater quality is longer-term.

Practical methods for the measurement of logP for surfactants.

Hydrophobicity is a commonly used parameter in quantitative structure activity relationships. The ability to determine the octanol-water partition coefficient (logP) empirically for non-ionizing, non-surfactant type chemicals using traditional stir-flask methods has been successful and well documented. In comparison the ability to measure logP for surfactants is considered impractical due to their amphiphilic nature, which gives them a tendency to form micelles and reside at the octanol-water interface. In this study we have shown that working with compounds below their critical micelle concentrations (CMC), at the experimental concentrations, it is possible to obtain experimental logP values for a series of sulphobetaines using the stir-flask method coupled with reversed phase-high performance liquid chromatography (RP-HPLC). Until now the ability to verify calculated logP values for surfactants has been limited. Measuring logP as described here can now be applied to other surfactants to validate existing and new modifications to the fragment method.

Cutaneous nerve distribution in adult rat hairy skin after thermal injury--an immunohistochemical study.

Regrowth of cutaneous nerves after thermal injury was examined in rat hairy skin with use of protein gene product 9.5, which has been shown to label nerves in skin preparations. Tissue biopsies were obtained from injured and control skin at postburn days 1, 7, 14, 28, and 120, fixed in 4% paraformaldehyde, cryoprotected, sectioned, and immunostained with rhodamine conjugated goat anti-rabbit immunoglobulin G. Immunoreactivity for protein gene product 9.5 was intense and illustrated the process of nerve regrowth in rat skin after thermal injury. No nerve growth was detectable in 1- and 7-day preparations. Variable regeneration was noted in 14-day preparations. The 28- and 120-day groups produced nerve counts that were similar to control sections. Results suggest that rat hairy skin has a capacity for nerve regrowth after thermal injury. Nerves were noted to regenerate from beneath the scar. Burn wounds in rats demonstrated vigorous cutaneous nerve regeneration.

A technique for control of hypertrophic scarring in the central region of the face.

Various methods are available for applying pressure to the central portion of the face to reduce hypertrophic scarring after burn injury. Our center uses an elastomer insert with a thermoplastic backing, which is formed over a plaster mold of the patient's face. The insert is worn under a traditional anti-burn scar face mask. We reviewed the records of 26 patients with hypertrophic scarring to the central portion of the face to assess the effectiveness of the insert. Seventeen (65%) of these patients wore the insert until scar maturation. Three of these 17 patients later required reconstructive surgery of the central face. Our findings suggest that pressure to this part of the face may be effective in decreasing hypertrophic scar formation. The insert described in this article is inexpensive and relatively easy to fabricate.

Grease burns at fast-food restaurants. Adolescents at risk.

Intermountain Burn Center and Utah State Insurance Fund industrial records were reviewed to determine the incidence and consequences of grease burns among teenagers employed at fast-food restaurants. Burn center records reveal that 10 patients were admitted between 1977 and 1985, and that nine patients required surgery with mean burn care costs of $7389 per patient. State Insurance Fund records demonstrate that 81 grease-burn injuries were reported from 1982 through 1985, at an average burn care cost of $660 per patient. Causes of burn wounds included adding, filtering, or removing hot grease, dropping objects into hot grease, slipping on the floor, cleaning the grill or fryer, and splashing hot grease during cooking. Those treated as outpatients were off from work for as long as 10 days. These data identify an adolescent population at risk for work-related burn injury in fast-food restaurants.

In vivo evaluations of a new thromboresistant polyurethane for artificial heart blood pumps.

To reduce the risk of thromboembolic complications in prosthetic blood pumps, we have developed a new segmented polyurethane elastomer. This material is unique because its mechanical properties for long-term durability and surface properties for biocompatibility have been separated and developed in two distinct materials. Improved thromboresistance is then obtained by a 1% concentration of a new polymeric surface-modifying additive blended with the base polyurethane before fabrication of the blood pump. To evaluate this material in vivo, we performed 10 implants, in calves, of the Pierce-Donachy prosthetic ventricle with blood-pumping sacs and cannulas fabricated from the new surface-modifying additive copolymer blend (Thoratec's BPS-215M). In four control implants the blood sacs and cannulas were fabricated from Ethicon's Biomer segmented polyurethane, which is the present clinical standard for most artificial hearts and circulatory support devices. The blood pumps were connected from the apex of the left ventricle to the descending aorta in male Holstein calves weighing 82 to 108 kg and were driven pneumatically in the full-to-empty mode with flows averaging 5 to 6 L/min. Each calf was medicated with aspirin and dipyridamole throughout the study period and was electively put to death after 4 weeks for evaluation of explanted blood sacs and for examination of the kidneys for infarction. All 10 explanted blood sacs made with the surface-modifying additive copolymer blend were shiny and completely free of thrombus. Three of the four explanted Biomer blood sacs showed visible red thrombus, and all four showed small areas of white thrombus. The average surface area of the Biomer blood sacs covered with thrombus was 45 +/- 32 mm2. Use of a semiquantitative scale to assess renal infarction demonstrated that nine of 10 animals with a surface-modifying additive copolymer blend blood sac had infarction less severe than the mean infarct score of the animals with a Biomer sac. The surface-modifying additive copolymer blend has excellent mechanical and physical properties necessary for use in artificial heart blood pumps. From these experiments, we conclude that the surface-modified polyurethane blend is superior to Biomer polyurethane in blood compatibility and in freedom from thromboembolic risk. This material is now approved by the Food and Drug Administration for investigational device exemption studies in the Pierce-Donachy prosthetic ventricle.