Characteristics of greenhouse gas emissions from an anaerobic wastewater treatment system in a natural rubber processing factory.

Greenhouse gas (GHG) emissions from both open-type and closed anaerobic wastewater treatment systems in a natural rubber processing factory in Vietnam were surveyed. In this factory, wastewater was treated by an open-type anaerobic baffled reactor (OABR) that comprised 60 compartments. A part of the wastewater was fed to a pilot-scale up-flow anaerobic sludge blanket (UASB) reactor to enable a comparison of the process performance and GHG emission characteristics with those of the OABR. In the OABR, 94.4% of the total chemical oxygen demand (COD) and 18.1% of ammonia nitrogen was removed. GHGs emitted from the OABR included both methane and nitrous oxide. The total GHGs emitted from the OABR was 0.153 t-CO2eq/m3-wastewater. Nitrous oxide accounted for approximately 65% of the total GHGs emitted from the OABR. By contrast, 99.6% of the methane emission and 99.9% of nitrous oxide emission were reduced by application of the UASB. However, the ammonia removal efficiency of the UASB was only 2.2%. Furthermore, Acinetobacter johnsonii, which is known as a heterotrophic ammonia remover, was detected only in the OABR. These results indicated that high nitrous oxide emissions were caused by denitrification in the OABR and that application of the closed anaerobic system could drastically reduce the emissions of both methane and nitrous oxide.

Impact of aluminum chloride on process performance and microbial community structure of granular sludge in an upflow anaerobic sludge blanket reactor for natural rubber processing wastewater treatment.

In this study, granular sludge formation was carried out using an aluminum chloride supplement in an upflow anaerobic sludge blanket (UASB) reactor treating natural rubber processing wastewater. Results show that during the first 75 days after the start-up of the UASB reactor with an organic loading rate (OLR) of 2.65 kg-COD·m(-3)·day(-1), it performed stably with a removal of 90% of the total chemical oxygen demand (COD) and sludge still remained in small dispersed flocs. However, after aluminum chloride was added at a concentration of 300 mg·L(-1) and the OLR range was increased up to 5.32 kg-COD·m(-3)·day(-1), the total COD removal efficiency rose to 96.5 ± 2.6%, with a methane recovery rate of 84.9 ± 13.4%, and the flocs began to form granules. Massively parallel 16S rRNA gene sequencing of the sludge retained in the UASB reactor showed that total sequence reads of Methanosaeta sp. and Methanosarcina sp., reported to be the key organisms for granulation, increased after 311 days of operation. This indicates that the microbial community structure of the retained sludge in the UASB reactor at the end of the experiment gave a good account of itself in not only COD removal, but also granule formation.