Effects of Metformin Delivery via Biomaterials on Bone and Dental Tissue Engineering.

Bone tissue engineering is a promising approach that uses seed-cell-scaffold drug delivery systems to reconstruct bone defects caused by trauma, tumors, or other diseases (e.g., periodontitis). Metformin, a widely used medication for type II diabetes, has the ability to enhance osteogenesis and angiogenesis by promoting cell migration and differentiation. Metformin promotes osteogenic differentiation, mineralization, and bone defect regeneration via activation of the AMP-activated kinase (AMPK) signaling pathway. Bone tissue engineering depends highly on vascular networks for adequate oxygen and nutrition supply. Metformin also enhances vascular differentiation via the AMPK/mechanistic target of the rapamycin kinase (mTOR)/NLR family pyrin domain containing the 3 (NLRP3) inflammasome signaling axis. This is the first review article on the effects of metformin on stem cells and bone tissue engineering. In this paper, we review the cutting-edge research on the effects of metformin on bone tissue engineering. This includes metformin delivery via tissue engineering scaffolds, metformin-induced enhancement of various types of stem cells, and metformin-induced promotion of osteogenesis, angiogenesis, and its regulatory pathways. In addition, the dental, craniofacial, and orthopedic applications of metformin in bone repair and regeneration are also discussed.

Human Periodontal Ligament Stem Cell and Umbilical Vein Endothelial Cell Co-Culture to Prevascularize Scaffolds for Angiogenic and Osteogenic Tissue Engineering.

(1) Background: Vascularization remains a critical challenge in bone tissue engineering. The objective of this study was to prevascularize calcium phosphate cement (CPC) scaffold by co-culturing human periodontal ligament stem cells (hPDLSCs) and human umbilical vein endothelial cells (hUVECs) for the first time; (2) Methods: hPDLSCs and/or hUVECs were seeded on CPC scaffolds. Three groups were tested: (i) hUVEC group (hUVECs on CPC); (ii) hPDLSC group (hPDLSCs on CPC); (iii) co-culture group (hPDLSCs + hUVECs on CPC). Osteogenic differentiation, bone mineral synthesis, and microcapillary-like structures were evaluated; (3) Results: Angiogenic gene expressions of co-culture group were 6-9 fold those of monoculture. vWF expression of co-culture group was 3 times lower than hUVEC-monoculture group. Osteogenic expressions of co-culture group were 2-3 folds those of the hPDLSC-monoculture group. ALP activity and bone mineral synthesis of co-culture were much higher than hPDLSC-monoculture group. Co-culture group formed capillary-like structures at 14-21 days. Vessel length and junction numbers increased with time; (4) Conclusions: The hUVECs + hPDLSCs co-culture on CPC scaffold achieved excellent osteogenic and angiogenic capability in vitro for the first time, generating prevascularized networks. The hPDLSCs + hUVECs co-culture had much better osteogenesis and angiogenesis than monoculture. CPC scaffolds prevacularized via hPDLSCs + hUVECs are promising for dental, craniofacial, and orthopedic applications.

Novel nanographene oxide-calcium phosphate cement inhibits Enterococcus faecalis biofilm and supports dental pulp stem cells.

BACKGROUND: Enterococcus faecalis (E. faecalis) is the most recovered species from the root canals after failed root canal treatment. Calcium phosphate bone cement (CPC) scaffold is promising for applications in endodontic treatment as a kind of root canal sealer. Graphene oxide (GO) has been extensively considered as a kind of promising nano-materials for antibacterial applications. In the present study, an injectable CPC-chitosan paste containing GO was developed for promising endodontic therapy. The antibacterial properties of this paste against E. faecalis biofilms as well as the support for human dental pulp stem cells (hDPSCs) were investigated. METHODS: CPC-chitosan composite with or without GO injectable scaffold was fabricated. The hDPSC growth and viability on scaffolds were investigated by live/dead assay. Antibacterial effects against E. faecalis biofilms were determined in clinical detin block samples. RESULTS: The antibacterial CPC-chitosan-GO disks had excellent hDPSC support with the percentages of live cells at around 90%. CPC-chitosan-GO also had greater antibacterial activity on E. faecalis than that of CPC-chitosan control using detin block models (p < 0.05). CONCLUSIONS: The injectable CPC-chitosan-GO paste had strong effects on inhibition E. faecalis and hDPSC support, which could fill the void of adjusting paste to the defect and shaping in situ for promising endodontic therapy.

Magnetic motion of superparamagnetic iron oxide nanoparticles- loaded dental adhesives: physicochemical/biological properties, and dentin bonding performance studied through the tooth pulpal pressure model.

The limited durability of dentin bonding harshly shortens the lifespan of resin composites restorations. The controlled, dynamic movement of materials through non-contacting forces provides exciting opportunities in adhesive dentistry. We, herein, describe comprehensive investigations of a new dental adhesive with superparamagnetic iron oxide nanoparticles (SPIONs) sensitive to magnetic fields for bonding optimization. This contribution outlines a roadmap of (1) designing and tuning of an adhesive formulation containing SPIONs to enhance penetrability into etched dentin guided by magnetic-field; (2) employing a clinically relevant model of simulated hydrostatic pulpal pressure on the microtensile bond to dentin; and (3) investigating a potential antibacterial effect of the formulated adhesives, and their biocompatibility. SPION-concentration-dependency chemical and mechanical behavior was shown via the degree of conversion, ultimate tensile strength, and micro shear bond strength to dentin. The effects of SPIONs carried on a dental adhesive on the bonding strength to dentin are studied in depth by combining experiments with in vitro simulated model. The results show that under the guided magnetic field, 0.07 wt.% of SPIONs-doped adhesive increased the bond strength that surpasses the reduction caused by hydrostatic pulpal pressure. Using a magnetic guide workflow during the bonding procedures, SPIONs-doped adhesives improved dentin's adhesion without changing adhesives' physicochemical properties. This outcome addresses the key challenge of poor resin infiltration of dentin's conventional total etching during the bonding procedure. The real-time magnetic motion of dental adhesives may open new paths to enhance resin-based restorations' longevity. STATEMENT OF SIGNIFICANCE: In this study, dental adhesives containing superparamagnetic iron oxide nanoparticles (SPIONs) were developed to enhance penetrability into dentin guided by a magnetic field. The adhesives were screened for physical, chemical, antibacterial properties, and cytotoxicity. For the first time, simulated pulpal pressure was used concurrently with the magnetic field to simulate a clinical setting. This approach showed that it is feasible to overcome pulpal pressure jeopardization on bond strength when SPIONs and a magnetic field are applied. The magnetic-responsive adhesives had great potential to improve bond strength, opening new paths to enhance resin-based restorations' longevity without affecting adhesives' biological properties. The use of magnetic-responsive particles and magnetically assisted motion is a promising strategy to improve the sealing ability of dental adhesives.

Novel dental implant modifications with two-staged double benefits for preventing infection and promoting osseointegration in vivo and in vitro.

Peri-implantitis are a major problem causing implant failure these days. Accordingly, anti-infection during the early stage and subsequent promotion of osseointegration are two main key factors to solve this issue. Micro-arc oxidation (MAO) treatment is a way to form an oxidation film on the surface of metallic materials. The method shows good osteogenic properties but weak antibacterial effect. Therefore, we developed combined strategies to combat severe peri-implantitis, which included the use of a novel compound, PD, comprising dendrimers poly(amidoamine) (PAMAM) loading dimethylaminododecyl methacrylate (DMADDM) as well as MAO treatment. Here, we explored the chemical properties of the novel compound PD, and proved that this compound was successfully synthesized, with the loading efficiency and encapsulation efficiency of 23.91% and 31.42%, respectively. We further report the two-stage double benefits capability of PD + MAO: (1) in the first stage, PD + MAO could decrease the adherence and development of biofilms by releasing DMADDM in the highly infected first stage after implant surgery both in vitro and in vivo; (2) in the second stage, PD + MAO indicated mighty anti-infection and osteoconductive characteristics in a rat model of peri-implantitis in vivo. This study first reports the two-staged, double benefits of PD + MAO, and demonstrates its potential in clinical applications for inhibiting peri-implantitis, especially in patients with severe infection risk.

An injectable and antibacterial calcium phosphate scaffold inhibiting Staphylococcus aureus and supporting stem cells for bone regeneration.

Staphylococcus aureus (S. aureus) is the major pathogen for osteomyelitis, which can lead to bone necrosis and destruction. There has been no report on antibacterial calcium phosphate cement (CPC) against S. aureus. The aims of this study were to: (1) develop novel antibacterial CPC-chitosan-alginate microbead scaffold; (2) investigate mechanical and antibacterial properties of CPC-chitosan-penicillin-alginate scaffold; (3) evaluate the encapsulation and delivery of human umbilical cord mesenchymal stem cells (hUCMSCs). Flexural strength, elastic modulus and work-of-fracture of the CPC-chitosan-penicillin-alginate microbeads scaffold and CPC-chitosan scaffold were evaluated. Penicillin release profile and antibacterial effects on S. aureus were determined. The hUCMSC delivery and release from penicillin-alginate microbeads were investigated. Injectable CPC-chitosan-penicillin-alginate microbeads scaffold was developed for the first time. CPC-chitosan-penicillin-alginate microbeads scaffold had a flexural strength of 3.16 ± 0.55 MPa, matching that of cancellous bone. With sustained penicillin release, the new scaffold had strong antibacterial effects on S. aureus, with an inhibition zone diameter of 32.2 ± 2.5 mm, greater than that of penicillin disk control (15.1 ± 2.0 mm) (p < 0.05). Furthermore, this injectable and antibacterial scaffold had no toxic effects, yielding excellent hUCMSC viability, which was similar to that of CPC control without antibacterial activity (p > 0.05). CPC-chitosan-penicillin-microbeads scaffold had injectability, good strength, strong antibacterial effects, and good biocompatibility to support stem cell viability for osteogenesis. CPC-chitosan-penicillin-microbeads scaffold is promising for dental, craniofacial and orthopedic applications to combat infections and promote bone regeneration.

A Biphasic Calcium Phosphate Cement Enhances Dentin Regeneration by Dental Pulp Stem Cells and Promotes Macrophages M2 Phenotype In Vitro.

Calcium phosphate cement (CPC) is promising for bone and dentin repair and regeneration. However, there has been no report of biphasic CPC for inducing dentin regeneration. The aim of this study was to develop a novel biphasic CPC containing ß-tricalcium phosphate (ß-TCP), and investigate its effects on odontogenic differentiation of human dental pulp stem cells (hDPSCs) and macrophage polarization. New biphasic CPC was formulated with different ratios of ß-TCP to an equimolar mixture of tetracalcium phosphate and dicalcium phosphate anhydrous. Mechanical properties, biocompatibility, and odontogenic differentiation induction ability of the cements and the inflammatory reaction to the cements were examined. A series of CPC containing ß-TCP were developed. CPC with 20% ß-TCP exhibited homogeneity and injectability, an acceptable setting time, and a twofold increase in compressive strength. Significant increases in hDPSCs' alkaline phosphatase activity, mineral deposit, DMP1 and DSPP gene, and protein expressions were obtained for 20% TCP-CPC, compared with traditional CPC (p < 0.01). The addition of ß-TCP did not promote macrophage polarization to the proinflammation phenotype. The addition of 10% and 20% ß-TCP promoted macrophage polarization to the anti-inflammatory phenotype. In conclusion, a biphasic ß-TCP-modified CPC was developed for the first time, demonstrating substantially increased dentin regeneration capability, while promoting macrophages to an anti-inflammation phenotype. The novel biphasic CPC is promising for tooth tissue engineering and dentin regeneration applications. Impact statement Dental pulp exposure from dental caries, wounds, or deep cavity preparation can cause pain and infection, which may lead to root canal treatment or tooth extraction. Maintaining pulp vitality is a major challenge in stomatology. We developed a new injectable ß-tricalcium phosphate (ß-TCP)-calcium phosphate cement (CPC) for the regeneration of dentin. Compared with traditional CPC, the new CPC +20%TCP possessed good cytocompatibility, acceptable injection force, higher compressive strength (increased by 63%), and greater odontogenic expression and mineral deposits (increased by more than twofolds), while avoiding any proinflammatory drawback. This new biphasic CPC is promising for dental pulp-capping, base, and liner applications to promote dentin regeneration, as well as potentially for bone tissue engineering applications, which warrant further studies.

Light Energy Dose and Photosensitizer Concentration Are Determinants of Effective Photo-Killing against Caries-Related Biofilms.

Caries-related biofilms and associated complications are significant threats in dentistry, especially when biofilms grow over dental restorations. The inhibition of cariogenic biofilm associated with the onset of carious lesions is crucial for preventing disease recurrence after treatment. This in vitro study defined optimized parameters for using a photosensitizer, toluidine blue O (TBO), activated via a red light-emitting diode (LED)-based wireless device to control the growth of cariogenic biofilms. The effect of TBO concentrations (50, 100, 150, and 200 µg/mL) exposed to light or incubated in the dark was investigated in successive cytotoxicity assays. Then, a mature Streptococcus mutans biofilm model under sucrose challenge was treated with different TBO concentrations (50, 100, and 150 µg/mL), different light energy doses (36, 108, and 180 J/cm2), and different incubation times before irradiation (1, 3, and 5 min). The untreated biofilm, irradiation with no TBO, and TBO incubation with no activation represented the controls. After treatments, biofilms were analyzed via S. mutans colony-forming units (CFUs) and live/dead assay. The percentage of cell viability was within the normal range compared to the control when 50 and 100 µg/mL of TBO were used. Increasing the TBO concentration and energy dose was associated with biofilm inhibition (p < 0.001), while increasing incubation time did not contribute to bacterial elimination (p > 0.05). Irradiating the S. mutans biofilm via 100 µg/mL of TBO and ≈180 J/cm2 energy dose resulted in ≈3-log reduction and a higher amount of dead/compromised S. mutans colonies in live/dead assay compared to the control (p < 0.001). The light energy dose and TBO concentration optimized the bacterial elimination of S. mutans biofilms. These results provide a perspective on the determining parameters for highly effective photo-killing of caries-related biofilms and display the limitations imposed by the toxicity of the antibacterial photodynamic therapy's chemical components. Future studies should support investigations on new approaches to improve or overcome the constraints of opportunities offered by photodynamic inactivation of caries-related biofilms.

Effects of Targeted Delivery of Metformin and Dental Pulp Stem Cells on Osteogenesis via Demineralized Dentin Matrix under High Glucose Conditions.

High glucose condition inhibited osteoblast differentiation could be a main mechanism contributing to the decreased bone repair associated with diabetes. Metformin, a widely prescribed antidiabetic drug, was shown to have osteogenic properties in our previous study. Transplanted mesenchymal stromal cells (MSCs) may differentiate into osteoblasts and promote bone regeneration. Our study aimed to combine the benefits of metformin and MSCs transplantation on osteogenesis in high glucose conditions. We developed demineralized dentin matrix (DDM) as a carrier to target deliver metformin and dental pulp-derived MSCs (DPSCs). We collected clinically discarded teeth, isolated DPSCs from the dental pulp, and prepared the DDM from the dentin. The DDM was observed by scanning electron microscopy and was found to have well-distributed tubes. Then, metformin was loaded into the DDM to form the DDM-Met complex (DDM-Met); DDM-Met released metformin at a favorable concentration. The DPSCs seeded with the DDM-Met in a high glucose medium showed satisfactory attachment and viability together with increased mineralization and upregulated osteogenesis-related genes, including alkaline phosphatase (ALP), osteocalcin (OCN), runt-related transcription factor 2 (Runx2), and osteopontin (OPN). A possible mechanism of the enhanced osteogenic differentiation of DPSCs was explored, and the adenosine 5'-monophosphate (AMP)-activated protein kinase (AMPK) pathway was found to play a role in the enhancement of osteogenesis. DDM-Met appeared to be a successful metformin and DPSC carrier that allowed for the local delivery of metformin and DPSCs in high glucose conditions. DDM-Met-DPSC construct has promising prospects to promote osteogenesis and enhance the much-needed diabetic bone regeneration.

Two-staged time-dependent materials for the prevention of implant-related infections.

Infection is a main cause of implant failure. Early implant-related infections often occur in the first 4 weeks post-operation. Inhibiting bacterial adhesion and biofilm formation at the early stage and promoting subsequent implant osseointegration are important for implant success. Our previous studies demonstrated that dimethylaminododecyl methacrylate (DMADDM) provided dental materials with antibacterial effects. In the present study, DMADDM and hydroxyapatite (HA) are loaded on to the titanium (Ti) surface via poly dopamine (PDA) self-polymerization. This local DMADDM-delivery Ti is referred as Ti-PHD. Here we report the two-staged capability of Ti-PHD: (1) in the first stage, releasing DMADDM during the high-infection-risk initial period post-implantation for 4 weeks; (2) then in the second stage, enhancing osteogenesis and promoting osseointegration. Ti-PHD has a porous surface with higher average roughness and greater hydrophilicity than pure Ti. Its biocompatibility is verified in vitro and in vivo. During the first 4 weeks of release, both DMADDM remaining on Ti surface and DMADDM released into the soaking medium greatly reduced the adherence and growth of pathogens. This is further confirmed by the prevention of bone destruction in a rat osteomyelitis model. After releasing DMADDM for 4 weeks, Ti-PHD promotes osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs) and new bone formation around the implants in vivo. This article represents the first report on the two-staged, time-dependent antibacterial and osteogenesis effects of Ti-PHD, demonstrating its potential for clinical applications to inhibit implant-associated infections. STATEMENT OF SIGNIFICANCE: The present study develops a two-staged time-dependent system for local dimethylaminododecyl methacrylate (DMADDM) delivery via Ti implant (referred to as Ti-PHD). DMADDM and hydroxyapatite (HA) are loaded on to the Ti surface with poly dopamine (PDA). Ti-PHD can release DMADDM during the high-risk period of infection in the first stage, and then promote osseointegration and new bone formation in the second stage. This bioactive and therapeutic Ti is promising to inhibit infections and enhance implant success.

Iron oxide nanoparticle-calcium phosphate cement enhanced the osteogenic activities of stem cells through WNT/ß-catenin signaling.

Calcium phosphate cement (CPC), functionalized with iron oxide nanoparticles (IONP), is of great promise to promote osteoinduction and new bone formation. In this work, the IONP powder was added into the CPC powder to fabricate CPC + IONP scaffolds and the effects of the novel composite on bone matrix formation and osteogenesis of human dental pulp stem cells (hDPSCs) were explored. A series of CPC + IONP magnetic scaffolds with different IONP contents (1%, 3% and 6%) were fabricated using 5% chitosan solution as the cement liquid. Western blotting and RT-PCR were used to analyze the signaling pathway. The IONP incorporation substantially enhanced the performance of CPC + IONP, with increases in both mechanical strength and cellular activities. The IONP addition greatly promoted the osteogenesis of hDPSCs, elevating the ALP activity, the expression of osteogenic marker genes and bone matrix formation with 1.5-2-fold increases. The 3% IONP incorporation showed the most enhancement among all groups. Activation of the extracellular signal-related kinases WNT/ß-catenin in DPSCs was observed, and this activation was attenuated by the WNT inhibitor DKK1. The results indicated that the osteogenic behavior of hDPSCs was likely driven by CPC + IONP via the WNT signaling pathway. In conclusion, incorporate IONP into CPC scaffold remarkably enhanced the spreading, osteogenic differentiation and bone mineral synthesis of stem cell. Therefore, this method had great potential for bone tissue engineering. The novel CPC + IONP composite scaffolds with stem cells are promising to provide an innovative strategy to enhance bone regenerative therapies.

Iron oxide nanoparticles in liquid or powder form enhanced osteogenesis via stem cells on injectable calcium phosphate scaffold.

The objectives of this study were to incorporate iron oxide nanoparticles (IONPs) into calcium phosphate cement (CPC) to enhance bone engineering, and to investigate the effects of IONPs as a liquid or powder on stem cells using IONP-CPC scaffold for the first time. IONP-CPCs were prepared by adding 1% IONPs as liquid or powder. Human dental pulp stem cells (hDPSCs) were seeded. Subcutaneous implantation in mice was investigated. IONP-CPCs had better cell spreading, and greater ALP activity and bone mineral synthesis, than CPC control. Subcutaneous implantation for 6 weeks showed good biocompatibility for all groups. In conclusion, incorporating IONPs in liquid or powder form both substantially enhanced hDPSCs on IONP-CPC scaffold and exhibited excellent biocompatibility. IONP incorporation as a liquid was better than IONP powder in promoting osteogenic differentiation of hDPSCs. Incorporating IONPs and chitosan lactate together in CPC enhanced osteogenesis of hDPSCs more than using either alone.

Periodontal Bone-Ligament-Cementum Regeneration via Scaffolds and Stem Cells.

Periodontitis is a prevalent infectious disease worldwide, causing the damage of periodontal support tissues, which can eventually lead to tooth loss. The goal of periodontal treatment is to control the infections and reconstruct the structure and function of periodontal tissues including cementum, periodontal ligament (PDL) fibers, and bone. The regeneration of these three types of tissues, including the re-formation of the oriented PDL fibers to be attached firmly to the new cementum and alveolar bone, remains a major challenge. This article represents the first systematic review on the cutting-edge researches on the regeneration of all three types of periodontal tissues and the simultaneous regeneration of the entire bone-PDL-cementum complex, via stem cells, bio-printing, gene therapy, and layered bio-mimetic technologies. This article primarily includes bone regeneration; PDL regeneration; cementum regeneration; endogenous cell-homing and host-mobilized stem cells; 3D bio-printing and generation of the oriented PDL fibers; gene therapy-based approaches for periodontal regeneration; regenerating the bone-PDL-cementum complex via layered materials and cells. These novel developments in stem cell technology and bioactive and bio-mimetic scaffolds are highly promising to substantially enhance the periodontal regeneration including both hard and soft tissues, with applicability to other therapies in the oral and maxillofacial region.

Novel metformin-containing resin promotes odontogenic differentiation and mineral synthesis of dental pulp stem cells.

This represents the first report on the development of metformin-containing dental resins. The objectives were to use the resin as a carrier to deliver metformin locally to stimulate dental cells for dental tissue regeneration and to investigate the effects on odontogenic differentiation of dental pulp stem cells (DPSCs) and mineral synthesis. Metformin was incorporated into a resin at 20% by mass as a model system. DPSC proliferation attaching on resins was evaluated. Dentin sialophosphoprotein (DSPP), dentin matrix phosphoprotein 1 (DMP-1), alkaline phosphatase (ALP), and runt-related transcription factor 2 (Runx2) genes expressions were measured. ALP activity and alizarin red staining (ARS) of mineral synthesis by the DPSCs on resins were determined. DPSCs on metformin-containing resin proliferated well (mean ± SD; n = 6), and the number of cells increased by 4-fold from 1 to 14 days (p > 0.1). DSPP, ALP, and DMP-1 gene expressions of DPSCs on metformin resin were much higher than DPSCs on control resin without metformin (p < 0.05). ALP activity of metformin group was 70% higher than that without metformin at 14 days (p < 0.05). Mineral synthesis by DPSCs on metformin-containing resin at 21 days was 9-fold that without metformin (p < 0.05). A novel metformin-containing resin was developed, achieving substantial enhancement of odontoblastic differentiation of DPSCs and greater mineral synthesis. The metformin resin is promising for deep cavities and perforated cavities to stimulate DPSCs for tertiary dentin formation, for tooth root coatings with metformin release for periodontal regeneration, and for root canal fillings with apical lesions to stimulate bone regeneration.

Magnetic field and nano-scaffolds with stem cells to enhance bone regeneration.

Novel strategies utilizing magnetic nanoparticles (MNPs) and magnetic fields are being developed to enhance bone tissue engineering efficacy. This article first reviewed cutting-edge research on the osteogenic enhancements via magnetic fields and MNPs. Then the current developments in magnetic strategies to improve the cells, scaffolds and growth factor deliveries were described. The magnetic-cell strategies included cell labeling, targeting, patterning, and gene modifications. MNPs were incorporated to fabricate magnetic composite scaffolds, as well as to construct delivery systems for growth factors, drugs and gene transfections. The novel methods using magnetic nanoparticles and scaffolds with magnetic fields and stem cells increased the osteogenic differentiation, angiogenesis and bone regeneration by 2-3 folds over those of the controls. The mechanisms of magnetic nanoparticles and scaffolds with magnetic fields and stem cells to enhance bone regeneration were identified as involving the activation of signaling pathways including MAPK, integrin, BMP and NF-κB. Potential clinical applications of magnetic nanoparticles and scaffolds with magnetic fields and stem cells include dental, craniofacial and orthopedic treatments with substantially increased bone repair and regeneration efficacy.

Metformin Enhances the Differentiation of Dental Pulp Cells into Odontoblasts by Activating AMPK Signaling.

INTRODUCTION: Metformin is a first-line drug for treating type 2 diabetes that regulates the differentiation of mesenchymal stem cells. Its effects on human dental pulp cells (DPCs) remain unknown. This study aimed to investigate the effects of metformin on the proliferation and differentiation of DPCs. METHODS: A live/dead viability assay kit was used to examine the effects of metformin on the cell viability of DPCs. Cell proliferation was analyzed using a cell counting kit (CCK-8; Dojindo, Tokyo, Japan). Levels of phosphorylated and unphosphorylated adenosine 5'-monophosphate-activated protein kinase (AMPK) were quantified by Western blot analysis in response to metformin and the AMPK signaling inhibitor Compound C (EMD Chemicals, San Diego, CA). The effects of Compound C on the metformin-induced odontoblast differentiation of DPCs were determined by alkaline phosphatase activity assay and von Kossa staining, and the expression of odontoblastic markers was evaluated by reverse-transcription polymerase chain reaction analysis. RESULTS: DPCs exhibited mesenchymal stem cell characteristics using flow cytometry. Different doses of metformin were shown to be cytocompatible with DPCs, yielding >90% cell viability. None of the concentrations of metformin up to 50 µmol/L affected cell proliferation. The Western blot assay showed that DPCs express functional organic cation transporter 1, a transmembrane protein that mediates the intracellular uptake of metformin. Metformin significantly activated the AMPK pathway in a dose-dependent manner. In addition, it stimulated alkaline phosphatase activity; enhanced mineralized nodule formation; and increased the expression of odontoblastic markers including dentin sialophosphoprotein, dentin matrix protein 1, runt-related transcription factor 2, and osteocalcin. Moreover, pretreatment with Compound C, a specific AMPK inhibitor, markedly reversed metformin-induced odontoblastic differentiation and cell mineralization. CONCLUSIONS: This study shows that metformin can induce DPC differentiation and mineralization in an AMPK-dependent manner and that this well-tolerated antidiabetic drug has potential in regenerative endodontics as well as in other regenerative applications.

Bone regeneration in minipigs via calcium phosphate cement scaffold delivering autologous bone marrow mesenchymal stem cells and platelet-rich plasma.

Macroporous calcium phosphate cement (CPC) with stem cell seeding is promising for bone regeneration. The objective of this study was to investigate the effects of co-delivering autologous bone marrow mesenchymal stem cells (BMSCs) and autologous platelet-rich plasma (PRP) in CPC scaffold for bone regeneration in minipigs for the first time. Twelve female adult Tibet minipigs (12-18 months old) were used. A cylindrical defect with 10 mm height and 8 mm diameter was prepared at the femoral condyle. Two bone defects were created in each minipig, one at each side of the femoral condyle. Three constructs were tested: (1) CPC scaffold (CPC control); (2) CPC seeded with BMSCs (CPC-BMSC); (3) CPC seeded with BMSCs and PRP (CPC-BMSC-PRP). Two time points were tested: 6 and 12 weeks (n = 4). Good integration of implant with surrounding tissues was observed in all groups. At 12 weeks, the CPC-BMSC-PRP group had significantly less residual CPC remaining in the defect than the CPC-BMSC group and the CPC control (p < 0.05). The residual CPC volume for the CPC-BMSC-PRP group was half that of the CPC control. New bone formation for CPC-BMSC-PRP was more than two-fold that of the CPC control (p < 0.05). CPC-BMSC-PRP had new blood vessel density that was nearly two-fold that of the CPC control (p < 0.05). In conclusion, CPC scaffold with autologous BMSC-PRP doubled the new bone regeneration and blood vessel density in minipigs compared with the CPC control. In the present study, the new macroporous CPC system with co-delivered BMSC-PRP has been shown to promote scaffold resorption and bone regeneration in large defects. Copyright © 2017 John Wiley & Sons, Ltd.

Injectable calcium phosphate with hydrogel fibers encapsulating induced pluripotent, dental pulp and bone marrow stem cells for bone repair.

Human induced pluripotent stem cell-derived mesenchymal stem cells (hiPSC-MSCs), dental pulp stem cells (hDPSCs) and bone marrow MSCs (hBMSCs) are exciting cell sources in regenerative medicine. However, there has been no report comparing hDPSCs, hBMSCs and hiPSC-MSCs for bone engineering in an injectable calcium phosphate cement (CPC) scaffold. The objectives of this study were to: (1) develop a novel injectable CPC containing hydrogel fibers encapsulating stem cells for bone engineering, and (2) compare cell viability, proliferation and osteogenic differentiation of hDPSCs, hiPSC-MSCs from bone marrow (BM-hiPSC-MSCs) and from foreskin (FS-hiPSC-MSCs), and hBMSCs in CPC for the first time. The results showed that the injection did not harm cell viability. The porosity of injectable CPC was 62%. All four types of cells proliferated and differentiated down the osteogenic lineage inside hydrogel fibers in CPC. hDPSCs, BM-hiPSC-MSCs, and hBMSCs exhibited high alkaline phosphatase, runt-related transcription factor, collagen I, and osteocalcin gene expressions. Cell-synthesized minerals increased with time (p<0.05), with no significant difference among hDPSCs, BM-hiPSC-MSCs and hBMSCs (p>0.1). Mineralization by hDPSCs, BM-hiPSC-MSCs, and hBMSCs inside CPC at 14d was 14-fold that at 1d. FS-hiPSC-MSCs were inferior in osteogenic differentiation compared to the other cells. In conclusion, hDPSCs, BM-hiPSC-MSCs and hBMSCs are similarly and highly promising for bone tissue engineering; however, FS-hiPSC-MSCs were relatively inferior in osteogenesis. The novel injectable CPC with cell-encapsulating hydrogel fibers may enhance bone regeneration in dental, craniofacial and orthopedic applications.

Minipig-BMSCs Combined with a Self-Setting Calcium Phosphate Paste for Bone Tissue Engineering.

Calcium phosphate cements (CPCs) are a new generation of bone repair materials with good biocompatibility for various stem cells. The minipig is a recommended large animal model for bone engineering research. This study aimed to evaluate the feasibility of utilizing CPC scaffolds for the adhesion, proliferation, and osteogenic differentiation of minipig's bone marrow mesenchymal stem cells (pBMSCs). Passage 3 pBMSCs were seeded on the CPC scaffold and cultured with osteogenic culture medium (osteogenic group) or normal medium (control group). The density of viable cells increased in both groups, and pBMSCs firmly attached and spread well on the CPC scaffold. The alkaline phosphatase (ALP) activity in the osteogenic group had significantly increased on day 7 (D7) and peaked on D14. qRT-PCR revealed that mRNA levels of ALP and three osteogenic marker genes were significantly higher on D4, D7, and D14 in the osteogenic group. Alizarin Red S staining showed a significantly higher degree of bone mineralization from D7, D14 to D21 in the osteogenic group. These results indicated that pBMSCs can attach, proliferate well on CPC scaffold, and be successfully induced to differentiate into osteogenic cells. Our findings may be helpful for bone tissue engineering and the studies of bone regeneration.

A self-setting iPSMSC-alginate-calcium phosphate paste for bone tissue engineering.

OBJECTIVES: Calcium phosphate cements (CPCs) are promising for dental and craniofacial repairs. The objectives of this study were to: (1) develop an injectable cell delivery system based on encapsulation of induced pluripotent stem cell-derived mesenchymal stem cells (iPSMSCs) in microbeads; (2) develop a novel tissue engineered construct by dispersing iPSMSC-microbeads in CPC to investigate bone regeneration in an animal model for the first time. METHODS: iPSMSCs were pre-osteoinduced for 2 weeks (OS-iPSMSCs), or transduced with bone morphogenetic protein-2 (BMP2-iPSMSCs). Cells were encapsulated in fast-degradable alginate microbeads. Microbeads were mixed with CPC paste and filled into cranial defects in nude rats. Four groups were tested: (1) CPC-microbeads without cells (CPC control); (2) CPC-microbeads-iPSMSCs (CPC-iPSMSCs); (3) CPC-microbeads-OS-iPSMSCs (CPC-OS-iPSMSCs); (4) CPC-microbeads-BMP2-iPSMSCs (CPC-BMP2-iPSMSCs). RESULTS: Cells maintained good viability inside microbeads after injection. The microbeads were able to release the cells which had more than 10-fold increase in live cell density from 1 to 14 days. The cells exhibited up-regulation of osteogenic markers and deposition of minerals. In vivo, new bone area fraction (mean±SD; n=5) for CPC-iPSMSCs group was (22.5±7.6)%. New bone area fractions were (38.9±18.4)% and (44.7±22.8)% for CPC-OS-iPSMSCs group and CPC-BMP2-iPSMSCs group, respectively, 2-3 times the (15.6±11.2)% in CPC control at 12 weeks (p<0.05). Cell-CPC constructs accelerated scaffold resorption, with CPC-BMP2-iPSMSCs having remaining scaffold material that was 7-fold less than CPC control. SIGNIFICANCE: Novel injectable CPC-microbead-cell constructs promoted bone regeneration, with OS-iPSMSCs and BMP2-iPSMSCs having 2-3 fold the new bone of CPC control. Cell delivery accelerated scaffold resorption, with CPC-BMP2-iPSMSC having remaining scaffold material that was 7-fold less than CPC control. Therefore, CPC-microbead-iPSMSC is a promising injectable material for orthopedic, dental and craniofacial bone regenerations.